Bluetooth Question - Mouse AND Keyboard?

Hey guys. I just bought a new MacBook. It's pretty sweet, I must say.
But I have one question. If I bought a wireless keyboard and the wireless mighty mouse, would I be able to use both? Because they both use Bluetooth (I'm talking about the official Apple ones) and I want to know if I can use both or if I can use just one before making a purchase.
Thanks in advance.

Personally, I prefer the Apple ones. I have two sets to use with my computers.
Some people like the logitech ones. I just prefer to use the official ones - even if they are a little bit more pricey, they always work and feel so good.

Similar Messages

  • Bluetooth Mighty Mouse and Keyboard not working in Win XP!

    Hi All,
    I simply cannot get my Bluetooth Mighty Mouse and Keyboard to work in Win XP via Bootcamp! The bluetooth icon appears in the tray and even shows that they are connected but they do nothing at all. One thing to note is that they show up as connected but with no password. Could this be the problem? If I reconnected the two with new passcodes for XP, would they still work when I reboot in OSX?

    upgrading to vista sorted things out!

  • My Imac just quit the bluetooth for mouse and keyboard. What do I do?

    today my I mac doesn 't recognize my blue tooth mouse and keyboard. Fortunately I still had USB units for back up. how do I get Imac to do bluetooth again?

    I have the solution!!!!!!!
    After months of irritating trying....
    I installed usboverdrive
    then deinstalled it
    from earlier sessions  had installed magicprefs --> now I could configure my mouse
    And magic   my mouse still works after a 'sleep'

  • How I got the Bluetooth Magic mouse and Aluminum keyboard to work in XP

    NOTE: The following steps fixed my issue. I thought I would share what worked for me but I really don't ever visit these discussion groups. I used a combination of Sysinternal tools to isolate what was causing my issue and rectified it.
    I couldn't for the life of me get the bluetooth magic mouse and keyboard working in a bootcamp'd windows xp. Here are the steps that I performed to finally get it to work. The assumptions are that you are running a clean XP build with SP3 and all windows updates installed.
    1. Using a USB mouse and keyboard. Insert the OS X install disc into the drive and run through the bootcamp drivers install. (These steps are outlined at Page 12 in the Apple Boot Camp Installation Guide: http://manuals.info.apple.com/en/bootcampinstall-setup.pdf). Let the installers run per apple instructions in the bootcamp installation guide. At the end it will want to reboot. Reboot the system.
    2. After the system reboots login and run the Apple Software Update utility to update from bootcamp 3.1 to 3.2. It will run through a bunch of installers and ask to reboot at the end. Reboot.
    3. After the system reboots login and go to start=>run and type "services.msc" to bring up the services control panel.
    4. Double-click the "Bluetooth Support Service" to open the properties.
    5. Go to the "log on" tab and look to see what is set. If it is set to "NT Authority\LocalService" then click above it to change to "Local System account." Then click "OK." It will tell you the changes won't take effect until the service is restarted. No worries.
    6. You will be back in the main services control panel. Make sure the "Bluetooth Support Service" is highlighted and look up to the left and select "restart the service."
    7. Close all the open windows and then go to start=>run and type "control panel" and hit enter.
    8. Double-click the "Bluetooth devices" control panel applet and follow the Apple instructions provided on Page 18 of the guide referred to earlier. Start with the mouse first. Stop when done with the mouse and don't continue on to the keyboard yet.
    9. At this point my mouse was "installed" but did not show "connected" in the bluetooth devices applet. I then highlighted the mouse and clicked the "properties" button down to the right.
    10. Once in the properties of the mouse I selected the "services" tab. My issue before making the switch to "Local System" account for the Bluetooth services was then when I tried to click the check box to enable "Drivers for keyboard, mice, etc (HID)" I would get an "access denied" error. Now that the switch has been made you should be able to click that check box without error. Click OK after enabling.
    11. You will suddenly see systray (lower right of the screen where the clock is) saying that new hardware has been detected and enabled. Once this is all done you will see "connected" below the device in the Bluetooth applet. Give your mouse a go. It should be working now. Sweet!
    12. Follow the steps in the Apple guide for your keyboard. This should work too now. Sweet!
    Best of luck.

    It depends on how far it is and how thick your walls are. If there plasterboard partitions and only 10 feet apart then probably.
    If you have a mobile phone with bluetooth, then try sending the computer a picture of file from similar distances to that you intend using the keyboard, if it works then a bluetooth keyboard and mouse should.

  • Mighty Mouse and keyboard bluetooth drop

    I have spent the past 2 days restarting my computer to get it to recognize bluetooth mighty mouse and keyboard for imac. Now it see's neither, even with brand new batteries in each. Have had to revert to older keyboard and mouse (both bluetooth). Ideas?

    Hello:
    Reset the SMC and PRAM.
    Barry

  • TS3048 I am usng a bluetooth keyboard with my Mac and some of the keys are not working.  They are the numbers 1 through  9.  I have gone through the troubleshooting for mouse and keyboard and everything looks good. How can I get them to work again?

    Hi,  I am using a Mac computer that my husband set up.  I have worked on it recently with no problems.  Today, I am having problems with the bluetooth keyboard not  working properly.  The numbers 1 through 9 do not work.  I have gone through troubleshooting wireless mouse and keyboard issues and everything looks good.  Except, when I check the keys on the keyboard viewer, these keys still do not work.  The webpage guides me through and at this point I do not know what to do next, because the keyboard is still not working properly.  I sure hope there are some experienced people in the community to help me.  What should I do?

    Hi:
    I wish my suggestion had gotten you further.
    I do suggest you try to connect the keyboard again.  The request for a number is a step in it trying to pair.  If it gets by the number, it sometimes takes a little while to get connected.  If you are unable to get it connected and want a new one, I have been using Apple Bluetooth keyboards for years - and I like them. The one I have (the newest model) only uses two batteries and is very thin. 
    Speaking of batteries, if you are not already doing so, you might consider rechargeables.  I have a drawer full of them and use a 15 minute charger.  I go tired of buying batteries and rechargeables are environmentally friendly to boot. At the moment, I use 2450 mAh Energizers and a 15 minute Energizer charger (all purchased new on eBay at a very reasonable price).
    I am far from an iPad "expert," although I have one.  If my suggestion below does not help, post your question in a separate thread in the iPad forum.
    I had a terrible time syncing my iCal on my Mac with my iPad iCal (confusing - hopefully it makes sense).  I quit using iCloud as that added to the confusion. There is a facility to one-time sync items.  When you connect your computer to your iPad, iTunes opens.  The system begins a process (automatic backup and so on). After it finishes, you can click on "info."  At the bottom of the screen, there is an advanced section.  You can select any of the items and then force it to sync. The iCal information from your computer would be deposited on the iPad. 
    After all that, I do not use a Google calendar so the information may be worthless to you.
    If you want to reset the iPad to factory settings, you can do that when it is connected to iTunes (one of the options).  Me being me, I try never to erase anything. 
    Barry
    Message was edited by: Barry Hemphill

  • Bluetooth mouse and keyboard do not work

    I purchased an iMac G5 about 6 months ago. I got it with a bluetooth mouse and keyboard. I have had trouble with it from day 1. Apple had me replace the logic unit, and it worked for a couple of weeks. Then as soon as the 90-day warranty for complimentary service ran out, it began working sporadically. Now it doesn't work at all. It says I don't have a bluetooth module installed or attached to my computer (which is what it said before the logic unit was replaced. The computer works fine with a USB mouse and keyboard. Had I known bluetooth was so tempermental and difficult, I sure wouldn't have got it with my computer.
    Unless there is a smart person out there who knows what is going on, I guess I need to buy a new USB keyboard and mouse. Anybody interested in buying a bluetooth keyboard and mouse cheap?

    Russell,
    The warranty period on your mac is 1 year. The complimentry phone service period is 90 days unless you have a hardware problem. I'd say you likely have a hardware problem and will not be charged for the phone call.
    I'd suggest 2 things:
    1. Sign up for Applecare as has been recommended countless times.
    2. Make the call to tech support and see what they say about your problem.
    Good Luck,
    John

  • Brand new IMac 27 bluetooth mouse and keyboard not connecting for eight minutes after start up.

    I have a new imac 27 that has worked flawlessly for three weeks.
    All of a sudden, when starting up the mac boots fine but the bluetooth mouse and keyboard are non responsive. This state is maintained for between 7 and 8 minutes then both mouse and keyboard start working and continue doing so for the rest of the day....until the next restart and the whole saga repeats itself.
    Both sets of batteries are fully charged.
    I have scoured different sites and tried any suggestion that made any sense, to no avail. All I am able to do at the moment is to do the time, wait the 7 to 8 mins. and then all's good.
    My first Mac and this is very annoying especially as Apple must be aware of this issue but no solution is forthcoming!
    Any suggestions/workarounds would be great.
    Thanks

    if you are using rechargeable batteries sometimes they don't stay charged for as long as they should try using alkalaine batteries and see if the issue still persists.
    also try doing an SMC reset, the following article tells how to do this:
    http://support.apple.com/kb/HT3964

  • Bluetooth Mouse and keyboard STILL Not working can someone help me?

    i have an apple Bluetooth Keyboard and wireles mighty mouse. Since i have installed leopard months ago it was working fine but then my mouse and keyboard stopped pairing with my Powerbook it recognises the devices but the refuse to pair i changed the batteries and installed the software that cam ith the keyboard and mouse and still nothing works.
    Can someone help me please

    After updating to 10.5.2 I am still experiencing problems with my Apple wireless mouse and keyboard. This is a Leopard issue ( here is just one blog on the topic
    http://aralbalkan.com/1086 ) in 2005 I purchased a Mac Mini which I love and never experienced a Bluetooth problem till I installed Leopard several months ago, now at least once a week, on average 2-3 times a week, I loose connection with the keyboard or the mouse and it takes awhile to re-establish the connection. I was hoping the last upgrade would address this issue but no such luck.

  • What is required for Bluetooth mouse and keyboard?

    I am thinking of buying a wireless keyboard and mouse and want to make sure I can do it on this iMac G4 computer, bought in 2003. I ran the system profiler and see no information on Bluetooth. If I bought the Apple wireless mouse and keyboard and the D-Link DBT-120 USB Bluetooth Adapter, would that be all I need? Is the installation of these things straighforward so that I could do it at home? Is it likely to work well?
    iMac G4   Mac OS X (10.4.4)   1 Ghz, 512 RAM

    Hello James:
    The Bluetooth dongle and the BT mouse and KB are the only things you would need. I found that setting up (pairing) the mouse and KB are straightforward and easy.
    Barry

  • Bluetooth mouse and keyboard go off exactly the same time, and don't connect agian after ive installed the mac os x 10.8 updates please fix this apple

    After Installing the mac os x update for 10.6.8 ive recentley in the last couple of days the bluetooth mouse and keyboard going off at the same time ive looked at some help but i feel like this is a software bug after installing so any other suggetions than taking it into an Apple Store,
    I hope apple fixthis problem in there next patch update.

    Hi,
    Welcome to the    Discussions
    Does the App launch form the Applications Folder rather than the DOCK ?
    The icons in the DOCK are links to the App. Sometimes this link can get broken.
    8:37 PM Sunday; December 27, 2009
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • Apple wireless mouse and keyboard stop working ... now says OS X version and bluetooth incompatible

    For no apparent reason my apple wireless mouse and keyboard stopped working. I was not upgrading or installing anything, the batteries are good, nothing was changed as far as I know. Now bluetooth discovers the paired devices, connects for about 30 seconds, the disconnects ... or stays connected but doesn't work.
    What's happenned ... I'm rushing to finish a big job ... any ideas? I've tried re-pairing but doesn't work ... says that OSX version may be incompatible with device bluetooth ... I'm using Lion so maybe there is another lion problem?

    Hello:
    Barry: What do you mean with "making devices favorites"?
    This is the method:
    Go to system preferences>bluetooth.  Highlight an item in the sidebar.  If detailed information does not appear, click on the little gear and select show more info.  Then click on the gear again and select favorite.
    And how could an hardware-related problem be (temporarily) solved rebooting the OS?
    Intermittent problems are, IMHO, most often caused by hardware.  Restarting will occasionally "fix" problems - why, I do not know.
    Barry

  • TS3048 how to turn on bluetooth when you only have a wireless mouse and keyboard

    How can you turn on the Bluetooth when you only have a wireless mouse and keyboard?

    Hello:
    Read this (the part about OS X not allowing Bluetooth to be turned off unless a USB mouse is connected):
    http://support.apple.com/kb/TS3048?viewlocale=en_US
    I have an old USB mouse available in case something happens to my BT mouse.
    Barry

  • Not responsive wireless mouse and keyboard, No internet/wifi and Bluetooth connection.

    Hi,
    I need help as both my wireless mouse and wireless keyboard are totally no responsive and I replaced them with fresh new batteries. My wifi/internet connection is offline too. My Bluetooth signal is the Bluetooth with jagged lines "Bluetooth offline". I tried to disconnect all my USB devices and restarted. I tried the methods listed here but to no avail.
    Yesterday afternoon there was a lightning in the skies and it caused blackout throughout my whole house. So it might be due to the power surge from the Lightning but all my other devices like my iPhone and modem router are working fine. I restarted the router too. It was fine the whole evening till nighttime yesterday. This morning I woke up, I can't do anything at all.

    First thing to try is resetting the PRAM per the instructions below. If that does not work then please use the instructions on how to connect a Bluetooth mouse and keyboard below.
    iMac SMC and PRAM reset
    Troubleshooting wireless mouse and keyboard issues - Apple Support

  • Problems with bluetooth connection to wireless mouse and keyboard

    I am using a mac book (aluminium) with 10.6.4 with a Cinema Display and a wireless keyboard and mouse. My time capsule is located only 1 meter away from the mac book and every time the automatic sync starts my mouse and keyboard do not repsond anymore. It seems that the bluetooth connection is somehow heavily loaded due to the network traffic. I have updated all devices and restarted the computer several times. It always keeps on doing that. Any help?

    philip_axmann wrote:
    every time the automatic sync starts my mouse and keyboard do not repsond anymore.
    what you are seeing is called _*wireless interference*_.
    change the channel your TC broadcasts on.
    JGG
    edited by the Jolly Green Giant (where Green stands for environmentally friendly)

Maybe you are looking for

  • Roles and Authorization strategy for SAP BIBO

    Hello All, We are doing an implementation where Source is a Oracle, SAP BI warehouse and BO XI3.1 as reporting solution. Our customer has asked for the authorization strategy that will be implemented in SAP BI. Currently the users belong to different

  • FIX for Dell U3011 displaying YPbPr instead of RGB via display port

    I kind of hacked my way around and got my Dell U3011 to properly display RGB instead of YPbPr (or YCbCr) over a mini display port to display port cable for my MacBook Pro Retina 15"! WOOHOO! no need for that stupid $150 dual link dvi to mini displayp

  • Fails to burn - not including files!!

    Hello there, I'm in the process of trying to burn two DVD's I've created. They build fine but when they go to format they always fail. In the log window it comes up with multiple errors such as this: Warning: The directory "/Volumes/ANNADRIANACACIA/F

  • Help in select

    HI, i have to add to this select condition that vbakvbtype = 'L'  <b>JUST WHEN</b> vbakauart = 'YMC0'. what is the best way to do that? I REWARD Regards   SELECT    vbak~vbeln vbak~objnr vbak~audat             vbak~netwr vbak~waerk vbak~kvgr3        

  • XML Data Upload  - J2EE Engine

    Hello, please can anyone tell me,  if the J2EE Engine must be installed to send XML data to BW using the HTTP port provided under the WAS soap service? I am working with XML data for BW and we do not have the engine installed. I have followed the 'Ho