Bluetooth question. Re-enable ignored devices?

I chose to select the option to ignore a "found" bluetooth device in the bluetooth settings, and now i need to reverse that decision so i can pair the device again.
i cannot see any option to do this and resetting the phone (even a restore doesnt seem to help)

Here are some articles on bluetooth and iphone troubleshooting:
http://support.apple.com/kb/HT1843 and http://support.apple.com/kb/HT1663

Similar Messages

  • How do i add a bluetooth device to my mac? there is no " " button in my bluetooth preferences and turning the devices to discover mode doesn't work

    How do i add a bluetooth device to my mac?  There is no " +" button in my bluetooth preferences and turning the devices to discover mode doesn't work

    The Bluetooth setup assistant should "find" a device in range when that device is turned on. What are you trying to add?
    Wireless input devices: Bluetooth frequently asked questions ( How do I add or remove a wireless device to or from my Mac (pairing or unpairing)?)
    Barry

  • 8700c bluetooth won't enable

    good afternoon all!
    i have an 8700c that i have unlocked after Ebay purchase to run Tmobil as my carrier. I have used my bluetooth in the past to pair with my GPS and the like. however, after a recent DM upgrade (6.0) i noticed that i cannot enable bluetooth at all.
    so far i have tried resetting to factory, removing DM 6.0 and going back to 5.0 to no avail. i then did a complete wipe with JL_cmder 1.9.1 and a pretty recent version of OS (4.5.0.110) installed now. and that didn't work.
    i also removed the BES IT policy from my device and DM (5.) did the wipe and re-install of 4.5.0.110 again and that hasn't helped either.
    so does anyone have any other options at this point for me to try? basically i can go into my bluetooth options, click enable bluetooth, it sits for a second, doesn't do anything and says that bluetooth is disabled.
    anyone have any other tips/tricks i can try? is there a way to verify that the bluetooth chip is functioning?
    thanks so much!!!

    according to ATT, it looks like 4.5.0.306 is the most recent version now. i am downloading that to give it a try as well.
    the BB was originally on Cingular if that matters (before i unlocked it). gracias!

  • How do you in xcode search devices in bluetooth and stablish connection other devices with iphone or ipad

    hi everyone
    how do you in xcode search devices in bluetooth and stablish connection other devices whit iphone or ipad ?
    the all answer is good
    and the source is enable for all

    Bluetooth on iOS has three different functions:
    o user level features -- For example, headsets.  There is no developer opportunity here (well, you can play audio that comes out the headset, but you know what I mean :-).
    o networking -- You can establish a PAN network to other iPhone OS devices with GameKit (going away)  or Bonjour.
    o accessories -- All Bluetooth accessory developers must go through the Made for iPod program.  Once you have an MFI device you can then talk to it through ExternalAccessory framework.
    <http://developer.apple.com/ipod/>

  • Bluetooth Question - why is it not disabled?

    According to my GUI, all Bluetooth functions are turned off yet when I check with terminal I see that Bluetooth is enabled.
    +Casa-XXXX-iMac:~ XXXX$ system_profiler SPBluetoothDataType+
    Bluetooth:
    +Apple Bluetooth Software Version: 2.1.6f8+
    Services:
    +Bluetooth File Transfer:+
    +Folder other devices can browse: ~/Public+
    +Requires Authentication: Yes+
    +State: Enabled+
    +Bluetooth File Exchange:+
    +Folder for accepted items: ~/Downloads+
    +Requires Authentication: No+
    +When other items are accepted: Ask+
    +When PIM items are accepted: Ask+
    +When receiving items: Prompt for each file+
    +State: Enabled+
    +Outgoing Serial Ports:+
    +Serial Port 1:+
    Address:
    +Name: Bluetooth-Modem+
    +RFCOMM Channel: 0+
    +Requires Authentication: No+

    pianoman1976,
    Gimme a sec......
    Here you go:
    To remove kernel extensions for AirPort hardware:
    1 Open the /System/Library/Extensions folder.
    2 Drag the following files to the Trash:
    AppleAirPort.kext
    AppleAirPort2.kext
    AppleAirPortFW.kext
    3 Open Terminal and enter the following command:
    $ sudo touch /System/Library/Extensions
    Just removing a kext isn't always enough, as some or all of them are cached. Updating the modification date/time of the directory in the above path flushes those caches, and thereby disables the service without doubt.
    Scott

  • On my MacBook Pro with Retina Display, Why does the "USB Devices Disabled Unplug the device using too much power to re-enable USB devices" keep coming up after I unplugged the usb device?

    On my MacBook Pro with Retina Display 15", that I purchased a few weeks ago, started coming up with the following message on my desktop:
    "USB Devices Disabled Unplug the device using too much power to re-enable USB devices".
    I unplugged the device and the message still keeps coming up.
    This is what I have done so far to troubleshoot:
    I shut down the laptop. When booting up I pressed the command+option+p+r at the same time. It comes up with a menu to reinstall OSX, Get help online, Run Disk Utility, etc. I choose the disk utility and repair the disk and then restarted.
    The message keeps popping up and I can't seem to get rid of it. Why does the message keep popping up even though I don't have any devices hooked up to the laptop at all? Any help to reenable my usb ports and get rid of the messaage would be helpful.

    I talked to Apple Support and we at least stopped the bleeding, a little bit. These are the troubleshooting steps I did before I contacted Apple Support:
    1. Reinstalled OSX
    2. Restore the last known good Time Machine Backup.
    This did not fix my issue, so I called Apple Support and they told me this:
    1. Turn Power off.
    2. Wait 15 seconds.
    3. Plug in Magsafe adapter.
    4. Wait 15 seconds.
    5. Hold down the Shift+Option+Power Button for 20-30 seconds.
    6. Turn Power back on.
    Ok, this stopped the bleeding a little, but as soon as I plugged in a Apple USB Superdrive
    and a Apple Mini Displayport to VGA Adapter. This "USB Devices Disabled" pop-up pops up like every 30 minutes now. At least, it is not constantly popping up after I close it, so I guess it will do for the temporary. Going to contact Apple support, later, though to see what else can be done.

  • Why does my Macbook pro said "unplug the device using too much power to re-enable USB devices" when i plug in my iphone's charger to connect my phone with the mac?

    my iphone 5's charger is not working anymore with the mac or the normal plug in neither, i dont know why. whenever i plug in my mac, i have to twist the charger a little and my mac said "USB Devices Disabled: Unplug the device using too much power to re-enable USB devices". of course it cant connect with the itunes in my mac, but somehow it still syncs the music to my iphone... i don't understand why. please help me thanks!

    try resetting the ipad,or change the cable ,it woould work 

  • Why do I get this error when trying to use my bluetooth headset as a listening device? There was an error connecting to your audio device. Make sure it is turned on and in range. The audio portion of the program you were using may have to be restarted.

    Why do I get this error when trying to use my bluetooth headset as a listening device? There was an error connecting to your audio device. Make sure it is turned on and in range. The audio portion of the program you were using may have to be restarted.

    I may have already resolved this issue buy removing the device from my computer and re-pairing it. It is currently working just fine.

  • I am unable to enable a device that was disabled through my account.

    I am trying to re-enable a device that I previously disabled through the members center.
    When I go the the list of devices I have added to my account I can see all of them. The device I am trying to enable again is greyed out indicating it is disabled. Clicking on this device opens a drop down menu showing the devices name, UDID and 2 buttons (Edit and Enable). When I try to click either of these buttons, there is no responce and nothing happens.
    Next to the title 'iOS Devices' there are 3 buttons, 'Add', 'Edit' and 'Search'. Clicking this edit button removes the greyed out device from my list until I cancel this attempted edit.
    I have also tried re-adding the device from the Organizer window in XCode. This only yeilds an error responce saying "This device '(UDID)' is already registered, but has been disabled. You can re-enable it from your list of registered devices in your account on the developer website." As I have already tried this I am all out of ideas.
    Can someone tell me what I am doing wrong, or if there is some way to re-enable my device. I need the device for testing my app.

    Supposedly you are on a good track trying to resolve this through the Member Center.  I too have this problem presently, and the only reference I found addressing enabling the previously disabled devices is in Apple's App Distribution Guide under 'Adding Devices to Your Provisioning Profile' > 'Troubleshooting', where it says: "If your device was previously registered but is disabled, enable the device using Member Center...".  Apologies if you have seen this already, but perhaps this is a good lead to explore the Member Center further.  As I have been so far unsuccessful in the above Troubleshooting advice, I wish to join ScottH87 and ask someone, perhaps from Apple, to suggest the resolution.  Thank you in anticipation.

  • Problem with yellow question mark at other devices.

    I have lost my wireless connection, there is a yellow question mark at other devices.  I have therefore no software for PCI flash memory, PCI modem and Network controller.  I am not sure what to download from website as everyone I think it is says that software is already present.  I can use internet on a wired connection but not wireless.  Dont know what else to try so please help!

    what is the model number of your system?
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Bluetooth Version: 2.0   EDR device will it connect to my iphone 5s

    Hey Guys
    I have an keyboard that I got for my Galaxy phone with Bluetooth Version: 2.0  EDR device
    Will it connect to my iphone 5s and if it does
    How I get it to work?
    I have already got my bluetooth headset and bluetooth speakers to work
    Thanks in advance.

    I connected my imacs bluetooth keybord and a random windows bluetooth keybord without problems

  • Just purchased the iphone6 and can hardly hear when I get a call, despite volume up, bluetooth off and nothing obstructing device.  This issue is all over the Web, come to find out.  How to fix?

    Just purchased the iphone6 and can hardly hear when I get a call, despite volume up, bluetooth off and nothing obstructing device.  This issue is all over the Web, come to find out.  How to fix?

    Turns out there was a film on the glass side of the phone that I didn't even know was there! All is well now! Yay, cause I'm really liking this phone. Had a blackberry for ever. Thank you for your prompt response. Ann
    Sent from AOL Mobile Mail
    Get the new AOL app: mail.mobile.aol.com

  • "unplug the device too much power to re-enable USB devices"

    Every time i plug my mouse (razer naga) on any USB port it says "unplug the device too much power to re-enable USB devices", the mouse used to work perfectly but now i can't use it for more then 5 seconds without showing that notification and disabling my USB ports. Can somebody please give me a solution for this?
    (Sorry for the bad english, i'm from brazil.)

    See if any of the following helps:  http://support.apple.com/kb/HT1379 Resetting your Mac's PRAM and NVRAM & http://support.apple.com/kb/HT3964 Intel-based Macs: Resetting the System Management Controller (SMC) 
    Which model iMac are you using & which OS is installed on your comp? 

  • I have iPhone 6,  8.3. I cannot use bluetooth at all from my device, even to connect my macbook pro. I did all the recommended trouble shooting such as  reboot and reset network settings. but it does not recognise any bluetooth device. Pls help.Thank

    I have iPhone 6,  8.3. I cannot use bluetooth at all from my device, even to connect my macbook pro. I did all the recommended trouble shooting such as  reboot and reset network settings. but it does not recognise any bluetooth device. Pls help.Thank you.

    See iPhone BT profile on what can be connected/paired:
    iOS: Supported Bluetooth profiles - Apple Support
    And BT troubleshooting:
    iOS: Troubleshooting Bluetooth connections - Apple Support

  • MACBOOK PRO bluetooth not finding any audio devices ?

    Please help  , my bluetooth on my macbook pro (mid 2012)  don't seem to be finding any bluetooth devices ?
    I have never had to use the bluetooth on my macbook before but the wife bought  me a bluetooth speaker box this christmas thats been working fine with my i-phone and i-pad etc but my macbook bluetooth does not find any devices when searching in search mode ?
    Yes i am running Yosemite

    Hello! Please try a SMC reset: Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support

Maybe you are looking for

  • Excel sheet on sharepoint to be used as source for Xcelsius dashboard

    Hi Everyone, We have to build an Xcelsius dashboard based on an excel sheet's data. This excel sheet is placed on a sharepoint, which will be updated periodically. I would like to know what kind of dat a connection i can use to fetch this excel data

  • Error starting up ApEx's Oracle HTTP server

    Hello. I have just configured a brand new Oracle HTTP server on a brand new ApEx database. When I try to start the server, it doesn't start and I see errors in the log files. dads.conf in Apache/modplsql/conf directory: Alias /i/ "/u01/app/oracle/pro

  • Weblogic 8.1 Development, Machine hangs

    Hi, I am new to Weblogic 8.1. My development machine is P4, 512 MB RAM. But system hangs when I try to develop/run applications in WebLogic 8.1. I have to run Weblogic Workshop, server . Is there any better pattern/strategy for development machines.

  • Corporate Templates allowing users to postback through SharePoint rights settings

    We currently have our corporate MS Word 2013 templates on SharePoint. We have tested using group policy to set the Workgroup template folder and pull the templates into MS Word templates gallery through SharePoint/OneDrive and it has worked. We are n

  • Excel Cluster Connector for Microsoft HPC Pack 2012 R2 load error

    Hi, I tried to load the 'Excel Cluster Connector for Microsoft HPC Pack 2012 R2' but get an error 'A runtime error occured during the loading of the COM Add-in'. My environment: Windows 2012 R12 Std edition HPC Pack 2012 R2 Excel 2010 - 64 bits I hav