Bluetooth Question - why is it not disabled?

According to my GUI, all Bluetooth functions are turned off yet when I check with terminal I see that Bluetooth is enabled.
+Casa-XXXX-iMac:~ XXXX$ system_profiler SPBluetoothDataType+
Bluetooth:
+Apple Bluetooth Software Version: 2.1.6f8+
Services:
+Bluetooth File Transfer:+
+Folder other devices can browse: ~/Public+
+Requires Authentication: Yes+
+State: Enabled+
+Bluetooth File Exchange:+
+Folder for accepted items: ~/Downloads+
+Requires Authentication: No+
+When other items are accepted: Ask+
+When PIM items are accepted: Ask+
+When receiving items: Prompt for each file+
+State: Enabled+
+Outgoing Serial Ports:+
+Serial Port 1:+
Address:
+Name: Bluetooth-Modem+
+RFCOMM Channel: 0+
+Requires Authentication: No+

pianoman1976,
Gimme a sec......
Here you go:
To remove kernel extensions for AirPort hardware:
1 Open the /System/Library/Extensions folder.
2 Drag the following files to the Trash:
AppleAirPort.kext
AppleAirPort2.kext
AppleAirPortFW.kext
3 Open Terminal and enter the following command:
$ sudo touch /System/Library/Extensions
Just removing a kext isn't always enough, as some or all of them are cached. Updating the modification date/time of the directory in the above path flushes those caches, and thereby disables the service without doubt.
Scott

Similar Messages

  • Why apple is not disable people friendly and not providing an auto answer solutions for iphones isn't it the best smartphone in the world?

    why apple is not disable people friendly and not providing an auto answer solutions for iphones isn't it the best smartphone in the world?

    Your question sounds more like a statement.
    It's just a phone afterall...

  • Why can I not disable the guest user in the 10.8.2 update? I have never enabled the guest user, but after the update, it was automatically enabled with a "managed" tag. It is not selectable even after entering my admin password to unlock the options.

    Why can I not disable the guest user in the 10.8.2 update? I have never enabled the guest user, but after the update, it was automatically enabled with a "managed" tag. It is not selectable even after entering my admin password to unlock the options. I was able to select the account under "parental controls", but again, could not delete it. Why Apple? Why?!!????

    SOLVED Ok. I actually was able to disable it. I had to actually log in as the guest user to make it accessible in the preference window. Then I disabled it and logged out. Apologies if this was obvious for some people, but I have had some sort of issue with something every update since Snow Leopard.

  • Why can i not disable battery % on my iphone 5?

    setting - general - usage - battery percentage.
    when i toggle on/off there is no change? why can i not get rid of the battery percentage indicator?
    iphone 5 running ios6

    Hi adriaansnyman,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    Click on the link to see more details and screenshots. 
    iOS: Using Messages
    http://support.apple.com/kb/ht3529
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    If you still can't send or receive MMS messages
    To send and receive MMS messages on your iPhone, verify that your wireless carrier supports MMS.
    Ensure that MMS Messaging is turned on in Settings > Messages.
    Verify that your phone is able to access cellular data.
    Some carriers allow you to edit your APN (Access Point Name), which may prevent MMS from working.
    If you are roaming outside your calling area, make sure you have Data Roaming turned on in Settings > General > Cellular to send or receive MMS content.
    While on a phone call, you will be unable to send or receive MMS messages when using an EDGE, GPRS, or any CDMA cellular data network. After the phone call ends, you will receive any incoming messages. If you tried to send an MMS message, you may need to send it again.
    If the issue persists and your wireless carrier has confirmed that your wireless account is provisioned2 for MMS, restore the iPhone.
    I hope this information helps ....
    Happy Holidays!
    - Judy

  • Newbie question:  Why am I not hearing audio?

    I'll admit it, I'm a total noob when it comes to After Effects.  This is the very first project I've ever attempted in AE.  But I've watched a bunch of (Lynda.com and VideoCoPilot.net) tutorials and I think I know most of the rudimentary stuff I'll need to know in order to do what I'm hoping to achieve (fairly simple stuff) in this first project.
    But naturally, as soon as I get started, I run into a major roadblock.  The first asset I've imported into the project is an audio file (.wav).  I drag it on to the canvas and it shows up in the timeline, as expected.  Yet when I play the timeline, I hear nothing.  My audio is turned on (not muted) on the computer.  In fact, when I go to import the file, I'm able to play it in the import window (I'm on a Mac, so I get the little preview in the Finder window that comes up as part of the Import dialog box, and I can play it from there.).  But once it's imported into the project, nothing.
    I checked to make sure the track wasn't muted (it's not) and that some other track isn't solo'd (there are no other tracks yet).  I even expand the track to reveal the waveforms (left and right), and sure enough, they're there.  I should be hearing sound when I hit the spacebar and the play head starts moving down the track.  But no, I hear nothing.
    So why can I not hear this file?  There's nothing showing up in the VU meters in the upper right side of the interface either.
    The animation I'm going to build will be built to go along with this audio track, so I really need to hear it in order to build the animation.
    This is probably the simplest thing, but I'm stuck before I even get a step into this project.
    HELP!!!!  :-)
    Oh yeah, I'm running AE CS 5.5 on a Mac with OS X 10.8.2.
    Thanks in advance.
    -rb

    Here's the FAQ entry that Andrew mentioned:
    http://forums.adobe.com/thread/423108
    The best place to start learning After Effects is here:
    "Getting started with After Effects"

  • Another question: Why graph is not supported in UIX page?

    It seems that graph is not supported in UIX page.
    Why not supported, and when it will be supported?
    Regards,
    Shucheng Ma

    To my knowledge, there are no current plans to incorporate this into the 9.0.5 codeline.
    Kind Regards.

  • SE03 question - why can I not see my request?

    We have two requests which contain the same table.  When I use SE03 to search for any requests including this table only one request is reported. 
    Both requests were created by the same user and both are released.  When I search in SE03 I only look for this table, with the Released box ticked.  I haven't applied any other search restrictions.  The request which is reported has not been transported to our QA system (the one which is not reported has been transported) - but I would assume this is not relevant.
    Can anyone explain why this might be happening?
    Thanks, Chris

    Just for more info - this is from a screen shot from SE01 for the user (29561) who created these requests (the tick to indicate that the request is released has been converted to an x).  The table name is ZHTR_OCC_H_COSTS, the 2 requests are HRDK903765 and HRDK903642:
    +---  HRDK903765     x 29561        Table ZHTR_OCC_H_COSTS
    |   +---  HRDK903766 x 29561        Development/Correction
    |   |   +---  Table Definition
    |   |       +-----ZHRT_OCC_H_COSTS
    |   +---  Object List of Request
    |       --  Comment Entry: Released
    |       +---  Table Definition
    |           +-----ZHRT_OCC_H_COSTS
    +---  HRDK903642     x 29561        Keiron's workbench request
        +---  HRDK903643 x 29561        Development/Correction
    --  Program
    +---  Table
    +-----ZHRT_OCC_H_COSTS
        +---  HRDK903685 x 32044        Development/Correction
    +---  Table
    +-----ZHRT_OCC_H_COSTS
        +---  Object List of Request
            --  Comment Entry: Released
            --  Program
            +---  Table
                +-----ZHRT_OCC_H_COSTS

  • Why is ssl3 not disabled in firefox 35.01 on my pc, i test and it shows vulnerable to ssl3

    I have the latest version of Firefox installed on one of my pcs, not this one, running Windows 7 Professional. When I ran the SSL3 test it came back that my Firefox Browser is vulnerable. I have searched everywhere to find a fix for this and can't. Please help me with this.
    Thank you

    Starting Firefox 34.0 the vulnerable SSL 3.0 has been disable and TLS 1.0 is the minimum used by default. https://blog.mozilla.org/security/2014/10/14/the-poodle-attack-and-the-end-of-ssl-3-0/
    The security.tls.version.min in about:config should be set to 1 by default which means TLS 1.0 is the minim,um and not SSL 3.0 which is setting 0 on preference.
    Do you have Avast? as the https-scanning in Avast can actually make your connection less secure in some case and cause problems like this. So if you have Avast disable the https-scanning in Avast. Some other antivirus scanners may have an effect on this also.

  • Answer to my question: Why can I not use Premiere Elements 12 on my PC with WIndows 8.1 when the video is done with the same software on a PC with Windows 7?

    i got an answer to use archive function from Mr. Romano:
    I did as you said, but it did not work, I get the dummy video with no real video.
    I had no menu yet on the video.
     What came in my mind when I read your e-mail, on one PC is WIndows 8.1 64 bit and on the other Windows 7 32 bit.
    When I load the videos from the camrecorder (tape) with Premiere Elements without doing something, I can switch to the other PC and it works. 
    Regards
    N. Singer

    Vaihingen
    How did you go about transferring the Premiere Elements 12 project on Windows 7 64 bit to Premiere Elements 12 on Windows 8.1 64 bit.
    Therein is what I believe is your problem. You in all likelihood do not have a codec problem of any kind, rather Premiere Elements 12 project on Windows 8.1 64 bit with disconnect between it source media and the project file. Here is how it goes.
    When you import a file into Premiere Elements project, what you have in Premiere Elements is a copy of the original which is still at its hard drive save location. But the project must trace back to that original on its hard drive save location.
    You may have the project.prel (project file) opening in Premiere Elements 12 on the second computer, but what I suspect to be the case is that you do not have the project media on that second computer.
    If so....On the first computer, archive the project with File Menu/Project Archiver and its Copy Project option. Transfer the resulting saved Copied Folder to a USB Flash Drive which will be used to transfer the Copied Folder to the second computer. In the second computer, open the Copied Folder, right click the project.prel file in the Copied Folder, select Open With, and then Premiere Elements 12.
    Did you set up disc menu in the Premiere Elements 12 Windows 7 64 bit project?
    Please review and consider the above and let us know if any or all of that applies to your situation.
    Thank you.
    ATR

  • I have to ask some question why my app not uploaded?

    Hello Sir,
    I have upload app five time and its reject due to some problem, but i am not getting problem given by you even i have given rating 17 for any kind of sexual photograph, so please let me know what should i do ?

    Reasons
    10.6: Apple and our customers place a high value on simple, refined, creative, well thought through interfaces. They take more work but are worth it. Apple sets a high bar. If your user interface is complex or less than very good it may be rejected
    18.2: Apps that contain user generated content that is frequently pornographic (ex "Chat Roulette" apps) will be rejected
    10.6
    We still found the following issues with the user interface of your app:
    - Was not optimized to support the device screen size and/or resolution. The issue is specific to the iPad.
    These examples identify types of issues discovered in your app but may not represent all such issues. It would be appropriate to thoroughly evaluate your app to address these types of issues.
    Resources for learning how to improve your app:
    - Review the UI Dos and Don'ts
    - Watch the video The Ingredients of Great Apps to understand the basics of great apps
    - Watch the video “Designing User Interfaces for iPhone and iPad Apps” for practical design tips
    - Read the iOS Human Interface Guidelines and double check that your app's user interface adheres to these valuable guidelines.
    - Read the App Design Basics section of the iOS App Programming Guide.
    - Watch the iOS Development Videos to learn about programming and design tips.
    18.2
    Additionally, we found your app enables the display of user-generated content which may become sexually explicit. Therefore we ask that you put the following precautions in place, to ensure your app remains in compliance with the App Store Review Guidelines.
    - Use Moderators to flag and remove inappropriate content
    - Require that your users agree to terms (EULA) and these terms must be clear that there's no tolerance for objectionable content
    - Users need a way to flag or report objectionable content and users generating this content
    - Developer must act on objectionable content reports within 24 hours by removing the content and ejecting the user who provided the offending content
    - Developer needs a method for ejecting users who violate the terms of the EULA

  • Question - Why Lightroom is not releasing memory?

    I've posted this question earlier and was wondering if anyone else is having this problem.
    After Lightroom is closed everything slows down. I checked the Task Manager Process tab and noticed the LR is still hogging the memory at 80% to 92%. I have to end the task from there. I don't want to do this every time I shutdown the program. Is there a fix?
    Thanks

    I cannot duplicate this as reported with V1.0 trial on Windows XP.
    Memory allocations and CPU use varies with the gestures I make to the number of photos chosen. I see memory go up for each module loaded (hint: if you never use the Print, Slideshow or Web modules, don't click on them; they appear to be loaded upon demand) but it memory is also released. Average CPU seems reasonable for a foreground application.
    Now, for larger libraries, I bet Lr has to flush all the journaled changes, close up some big structures and finalize all the library stuff. This could probably take a noticeable amount of time after the GUI has closed. I'd expect this work to be finalized in a short amount of time and the actual process disappear.
    I guess with a really large library with a lot of pending changes this might take seconds, but even if it is minutes I'd just let it work (maybe purging previews?). A lot of big apps are designed with the new "defer what you can" paradigm, which means you defer a lot of housekeeping to shutdown to decrease startup time (and, therefore, increase perceived application performance).
    Real operating systems will give an app that is the process of shutting down access to the resources it needs to complete without starving other processes.
    If this is always a problem you might want to raise this with Adobe. It could be a deadlock somewhere.

  • Question:  why can i not watch movies?

    everytime i try to watch a movie the pop up says to download a adobe flash player. i try downloading this program and the popup says close internet explorer and that is where i cannot go any further i do not know how to close it...

    What is preventing you from closing Internet Explorer? 
    Here are a few ways to close it...
    - If you look at the window for Internet Explorer there is a small X in the upper right corner... clicking that will close Internet Explorer. 
    - If you right click the blue border area at the top and select Close, that will close Internet Explorer.
    - If you choose File -> Exit from the top menubar, that will close Internet Explorer

  • Question: why mail does not recognize an address book  group

    i could not find an address book forum - excuse me if i post here.
    an address book group with about 20 names has worked well for a year.
    today i added and deleted a few names. now mail does not recognize the name as an email group.
    i created a new group with a new name and imported all the names in one block from the non working group. the new group also is not recognized as having email addesses in mail.
    my other groups seem to work fine.
    i had entourage for awhile and had to rebuild it periodically. do i need to do something similar here.
    thanks

    Check the names of your groups that you have this issue with to make sure you don't have any special characters or extra spaces at the beginning or end of the group name.
    I just found another posting on the message boards that solved my issues. Someone discovered that they had a blank space in their group name which was causing the error. I didn't have any extra spaces at th end of the group name, but I did have a period in my group name (St. Francis). I removed the period from the group name in address book and now the emails send to that group without the error message.

  • Ask your question.Why would 3G not work

    My iPad won't work on 3G even though my phone and other iPads nearby do.

    Nani70 wrote:
    I haven't tried changing SIM cards. I guess it is detecting the SIM card as messaging is still working.
    That baffles me a bit as Messaging on the iPad would require internet access from the cellular service.
    What exactly does the iPad say in the corner next to the carrier name?  LTE?   4G?  nothing at all?  Do you get signal dots?
    I think you may be confusing a different legend with lack of 3G.  There are other types of cellular connectivity besides 3G. Its very possible its using something else. If you have internet access through Safari, and can get messages through iMessage then you have functional connectivity. Whether it be 3G or something else.

  • Why SELECT is not part of EJB transaction

    Hi,
    We observed the peculiar behaviour in 9iAS 9.0.3.1. One of our Bean method has SELECT statement(that run for 15mins - too long) and INSERT statement follows. The transaction-timeout set to 5 mins in SERVER.xml. The server instead of timing out after 5 mins(once the transaction started), times out only after completion of SELECT and at the time of INSERT.
    This throws open the question, why SELECT is not part of the transaction?

    Just thinking here, but from what you describe, the duration of the EJBSelect is what is causing the timeout on the tx to occur and therefore it is part of the TX.
    You do a 15min EJBSelect as part 1 of the tx. It completes and the server basically then flags the TX as timed-out.
    When you next perform an operation within the same TX, you get the tx timeout. So the cause of the tx timeout is the (long!) EJBSelect?
    Or are you actually expecting to get a TX timeout notification occur during the EJBSelect operation, before it completes?
    -steve-

Maybe you are looking for

  • How to remove tv card from touchsmart 610_1010

    The tv card in my touchsmart 610_1010 as stopped working the device manager says it is working and I've uninstalled it and reinstalled but the media centre says it cann,t detect tv tuner ' I was thinking of doing a card removal and reinstall , can an

  • Select query is taking lot of time to fetch data.....

    Select query is taking lot of time to fetch data.     SELECT algnum atanum  abdatu abzeit abname abenum bmatnr bmaktx bqdatu bqzeit bvlenr bnlenr bvltyp bvlber b~vlpla            bnltyp bnlber bnlpla bvsola b~vorga INTO TABLE it_final FROM ltak AS a

  • Central Person and Contact person relationship

    Hello Friends, I have HR replicated org.struct.where central user creation was active I maintained Table T77SO for local user creation HRALX  PBPHR  CREATE HRALX  PBPON  ON HRALX  HRAC      X Now i am able to integrate user thru users_gen in org.stru

  • Modify itab not working

    Hi , I am trying to change a field value in itab using MODIFY statement. The field is a char type and holding '0000000' initially. Now I am trying to change this value to other value. But the modify statement is not working. like the code is, data :

  • Satellite L300-17L - don't see any wireless networks detected

    Hello all, I just bought a Satellite L300 - 17L. All drivers seem to work except for the wireless card. First, I installed the driver pointed by this site but I discovered that the card is actually an Intel Pro 3945 card, not Realtek as specified in