Bluetooth reception issue

Usually bluetooth works ok; but recently; when using my Sony BT22 headphones on my iphone 4 for simple bluetooth reception; the signal would cut out every time I put the phone in my back pocket. I traced it to a weak signal would I could interrupt when I put my hand over the top of the phone. (I have a speck candyshell case) But the problem did not occur in my car for some reason. I'm stumped. Is it that the headset just had a low battery? A phone prob? A case problem? Interference from a grocery store security system?
Any ideas?
thx

Perhaps a solution is an iphone update that boosts the signal?
Sony tech support says this for my phones:
Thank you for contacting Sony Support.
I'm sorry that there is distorted sound from the Bluetooth stereo headset. Based on the information you've provided, I suggest that try the following steps to troubleshoot the issue.
1. Ensure that this unit is not receiving interference from a wireless LAN, other 2.4 GHz wireless device, or microwave oven.
2. check that the volume of the unit is not set too low.
3. Turn up the volume on the connected device if necessary.
4. Pair this unit and Bluetooth device again.
5. If the issue persist, reset the unit. Pairing information is not deleted by this operation. Insert a small pin, etc, into the hole, and push until you feel a click and check the operation.
Thank you for your time.
The Sony Email Response Team
C2AE
Vincent

Similar Messages

  • 4G LTE data reception issue in area of work building

    Hi, I'm having a data reception issue in a certain area at work.  The signal indicator at the upper right of the homescreen shows "4GLTE" but this is clearly inaccurate since I am not able to navigate to websites or send/receive multimedia messages.  If I move ~30 feet east in the building, the reception is restored.  Two people with iPhone 5 devices have the same issue.  However, the Verizon iPhone 5 allows you to turn off LTE.  Once this was done and the signal fell back to 3G, reception was restored, albeit with slower speeds, but at least reception wasn't completely blocked.  I understand 4G is not available in all areas, but in this case, the phone is not automatically switching to 3G and there is no workaround because there is no option to turn off LTE on the Z10.  In the "Settings" -> "Network Connections" -> "Mobile Network" -> "Network Technology" dropdown, the only values are:
    UMTS/GSM (when I switch to this, no networks are found)
    Global (the current selection)
    LTE/CDMA
    This is a big problem for me because for 8+ hours in the day I can't receive MMS messages or navigate to websites.

    Hi, Nate650,
    Sorry to hear about your problem with 4G. First, let me ask, have you updated your Z10 to the latest official software version? I had a similar problem with my Z10. After about an hour on the phone with CS, we figured out it was a problem with the tower near me. The problem was fixed by VZW and I have not had connection issues. You are right, though, about the Z10 falling back to 3G. Mine did before the update but not since.
    Doc

  • Bluetooth Mouse Issues

    Anybody having bluetooth connectivity issues after devices are paired? Periodically, my mouse stops working and I have to turn it off and back on for it to reconnect. Mouse doesn't do this when paired with my old Dell Inspiron 9300 laptop.-bp

    Hi All, I have been experiencing this random disconnect problem as well.  Sometimes it came good and then sometimes I had to remove and reinstall the same as everyone else.
     My problem is with a Logitech V470 mouse.  <o:p></o:p>
    Recently the symptoms changed and it became a permanent device instead of a bluetooth connected device. <o:p></o:p>
    Furthermore, it couldn't be removed at all.  The only way to remove it was to uninstall all of the Bluetooth module drivers.  When the system rebooted,
    it again loaded as a permanent device along with printers.  Please note I'm talking about it being fully connected but not functioning whether it was turned on or off (present or not present).  I wondered what had changed this time to make this significant
    change in behaviour.  Okay time to roll-back updates and go to a previous restore point/s.  Guess what, problem solved!  I had to go back two restore points to fix the problem.  What was it, it was a JAVASCRIPT auto update!<o:p></o:p>
    Once I past (rolled back) the most recent Javascript update the mouse returned to a bluetooth connected device and I could disconnect and reconnect.  Javascript
    changed the way this device was being recognised and connected.  
    JAVASCRIPT is underlying all of these problems of connection.  Roll it back and suddenly you'll have control again!  Hopefully Oracle will soon fix
    this, until then, I'm disabling updates of JAVA.<o:p></o:p>

  • Any other ideas on the reception issue?

    I am wanting to ask if anyone else has any other ideas on fixing the reception issue?
    I just got off the phone with an Apple "Supervisor". He agreed with me that the software update will only correctly display AT&T's signal that I am getting. He agreed that it will NOT remedy the dropped calls that alot of us are now getting with the use of the new iPhone 4. He also agreed that I either need to hold the phone differently or pay extra money either to Apple or to another manufacturer for a case that I have never used on previous iPhones.
    So, I am not going to return my beautiful new iPhone 4, but I do want to find out if anyone else has found anything else to remedy this problem without doing anything listed above. I am not trying to beat a dead horse, but I am tired of dealing with the big corporation that Apple has become. The same corporation that now, only cares about the number of iPhones and "Bumpers" sold as opposed to the customers satisfaction that purchased their iPhones.
    Message was edited by: Denverk1972
    Message was edited by: Denverk1972

    I don't have any problems either, with or without the bumpers on... it would be nice if ATT had mentioned where in particular their network was having the issues... also I've seen a lot of reports from the UK re the reception problems and one carrier's sim card (which is slightly too big and is shorting the antenna) seems to be the culprit in some cases...
    AT&T's statement is below
    "AT&T has come through with a statement on reports the company has been capping upload speeds for iPhone users.
    In a statement we first spotted through D: All Things Digital, AT&T is describing the problem as one pertaining to a software issue.
    AT&T informs that a software defect some Alcatel-Lucent equipment has been crippling 3G HSUPA performance, and says that vendor is working on a repair, though a schedule isn’t forthcoming just right now.
    AT&T and Alcatel-Lucent jointly identified a software defect — triggered under certain conditions – that impacted uplink performance for Laptop Connect and smartphone customers using 3G HSUPA-capable
    wireless devices in markets with Alcatel-Lucent equipment. This impacts less than two percent of our wireless customer base. While Alcatel-Lucent develops the appropriate software fix, we are providing normal 3G uplink speeds and consistent performance for affected customers with HSUPA-capable devices."

  • Nice updates/fixes but what about the reception issue?

    Don't want to beat a proverbial dead horse, but what about making the IPhone 4 a better receiver of calls? My 3Gs was the BEST phone I ever owned. I rarely had a dropped call, I was able to make and receive calls in places where no phone I had owned previously could. When I read that this phone had the best reception of any IPhone (according to Apple) I went and made the switch. Yes, I read many posts where folks say just that, great phone. I am on IPhone 4 number three and all have been plagued with reception issues, thought the first two were worse than this one. I go to the same locations every day and the 3Gs sent and received calls remarkably better. Just sayin.....

    n2speed125 wrote:
    What ps issue? I have none!! The reception issue is real and I lose signal in places where my 3GS would not.. I can hold my 3gs any way I like and still use the internet.. While using my iPhone 4 in the same place, all I get is the spinning wheel of death and it does not connect.. I've had the bumper on it since I got it and while it may help a little, it does NOT make the issue disappear..
    Just because an issue doesn't effect YOUR phone, doesn't mean it's not an issue for others..
    if you are not using a case then you are just ... idk... slow or something.
    because apple put the antenna on the outside of the phone it is easier to attenuate the signal but it also gives much better reception. i have not dropped one call on my iphone 4... i was dropping tons of calls on my 3Gs and i am in the same area.
    i have tried to attenuate the signal on my phone and cannot with the case on no matter how i hold it. if i take the case off and hold the sweet spot it drops like crazy. maybe your bumper isn't covering the antenna well enough.
    i got the incipio NGP for 19 bucks at walmart. if you put that case on and still have the issue then i think you are totally full of cr@p.
    Message was edited by: himoura

  • Is there any fix for the bluetooth connectivity issue after most recent OS update?

    Seems to be a common problem particularly with bluetooth headseat connectivity. Any ideas?

    There is no bluetooth connectivity issue after the recent OS update. There may be a problem with your phone, which may or may not be related to the update. A "common problem" looks like this in the forums:
    I haven't seen any threads on BlueTooth with over 1.4 million views and over 12,000 replies, or even any vaguely close. For any problem that someone has there is bound to be someone else amoung 150 million users who have it. That doesn't make it a "common problem."
    If you tell us what the problem is specifically and what you have done so far to try to resolve it someone can probably help you.

  • Bluetooth connection issues after update

    Is anyone experiencing bluetooth connection issues after upgrading to iOS 8.1.3?  I upgraded to iOS 8.1.3 and now it won't connect to my car bluetooth and my bluetooth speaker will sound like it has static from time to time.

    Hi, joshzik.  
    Thank you for visiting Apple Support Communities.
    I understand that you are experiencing issues with various Bluetooth devices and your iPhone.  Sometimes pairing the devices again can resolve the issue.  However, here are a couple articles that have some helpful troubleshooting steps regarding Bluetooth connectivity and an iOS device.
    Get help using your iPhone, iPad, or iPod touch with your car stereo
    http://support.apple.com/en-us/HT203412
    iOS: Troubleshooting Bluetooth connections
    http://support.apple.com/kb/TS4562
    -Jason H.

  • Wacom or Bluetooth Mouse issues with most recent Beta??

    Wacom or Bluetooth Mouse issues with most recent Beta??
    All I was wondering if anyone was having issues with Lightrooms beta and pointing devices… while I’m sure the Wacom Introus4 is dying in Lightroom I can’t verify that my Mouse is as well.
    I’m using the most recent Beta of Lightroom and Wacom Tablet Driver 615-3a… I’m sure the issue dosent reside with another program because the tablet only stops working in Lightroom. Basically I loose all tablet functionality until I reboot whin I attempt to access the Film Strip… I’ve repeated a few times and with each it dies…

    Unfortunately, although you are getting problems with your Wacom and Lr, the solution for the short term is to re-install an older driver for the tablet until Wacom come up with a new update to fix the prolem. This has been a long running problem for users when operating Lr with Wacom tablets.
    (I offer this solution not from personal experience, but from what other tablet users have reported in previous threads, and there have been several).

  • Re: Reception issues

    were now experiencing the same issue. No recption in the house. We were going to dump verizon but can't take phones to ATT and in no mood to buy all new phones.
    Branched from: Reception issues
    Message was edited by: Admin Moderator

    You are right, nobody knows when the next iPhone will be released. Odds are almost certainly not before WWDC in June (WWDC is June 6-10) and that has been a popular forum for Apple to announce new stuff.
    Also keep in mind that at least a few news stories have said to be prepared for the next iPhone to, possibly, be delayed due to parts shortages coming out of Japan (I believe they get batteries, screens and Flash RAM from Japanese sources, many of whom have already experienced production delays or disruptions due to things like power outages).

  • Apple is experiencing Bluetooth compatibilty issue since they have upgraded their Bluetooth from 2.1 to 4.0.

    Apple is experiencing Bluetooth compatibilty issue since they have upgraded their Bluetooth from 2.1 to 4.0. Is this the case with Ipad 4  I have a logictech keyboard and the ipad cant dicover it.  Please advise

    I wouldn't delete the firewall configuration as described above as you would lose all your rules that you have in place for your firewall. I do however think it could be a firewall rule issue. You could temporarily disable the firewall on the mac System Preferences > Security > Firewall to prove this without deleting all your rules by deleting that file. If this works then have a look at the rules you have in place and maybe make an exception to this set of rules.
    The 169..*. address you have is known as a APIPA address and is normally the address that you will receive when the DHCP client fails to find a DHCP server so this could be either sending or receiving data to the device that is blocked. DHCP needs to DORA (Discover, Offer, Receive and then Accept), which is a two way communication.
    Kind Regards

  • 4s reception issues

    got reception issues on my iphone 4s. At places, it keeps dropping the reception, then after 5 seconds, it comes back with full bars. Also, when I go underground (99% of the time) it keeps showing I have 1 bar of reception, when I come back out, it takes a couple of minutes to pick up the signal again. I keep having to go into airplane mode all the time to get the signal again.
    I know this isn't my sim or my provider as I've borrowed a samsung galaxy 2 and I don't have any issues there.
    Is there any way to fix this? It's really annoying.
    I'm on ios 5.1

    I'm having similar problems w/ my 4s. Have you discovered any remedies that make reception better, stronger?
    JP Bressieux

  • HT204490 bluetooth connectivity issue - Yosemite10.10.3 update

    The bluetooth connectivity issue still remains unresolved even after Yosemite 10.10.3 update. Any help will be appreciated.

    Nobody here knows that since 10.3 hasn't been released yet. You might check crackberry.com and see if anyone testng the leaked version has a Mercedes and can test.
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • I have a new iPad wifi tablet and I am having connectivity/reception issues does anyone know if Apple knows about tis problem and if they plan on resolving this issue?  Anyone else have this problem?

    New iPad having wifi reception issues.  Anyone know if Apple is aware of this issue and are they going to do something to address this problem with my $599+ piece of garbage?   Thanks.  Received this tablet on March 16th.

    Uh...there's a thread just three above your post with over 800 posts on this topic.  Read through it and you may see some ideas which may help you.......Since you didn't even look for similar threads, here's a link to the main topic on this........https://discussions.apple.com/thread/3812929?tstart=0

  • Does The iPhone 4 Still Have The Reception Issue

    hey guys i wanna know does the iphone 4 still have the "Death Grip" which is the reception issue (antenna issue) with iphone 4 when u hold ur hand (or fingers) near the antennas and the reception goes down to like 1 bar (n sometimes makes it go to no service).
    i think someone said they have made newer models of the iphone 4 what have fixed it but i am not 100% sure
    have they fixed it if i buy an iphone 4 now or does it still have the reception issue
    here is what it is if u dont know what the reception issue is : http://www.youtube.com/watch?v=-ixIHyEPO5g

    My blackberry still has the reception / antenna issue. And always has. In fact, it is so bad that I can terminate the connection if I hold the phone with my head and shoulder.
    My iPhone 4 (not s) on the other hand has never been a problem for me.
    A lot of noise—not much benefit. However Apple did apply new engineering to the problem—which is great!
    -Alan

  • Bluetooth Stereo Issues

    I have tried the Sony Ericsson HBHDS980 and HBHDS205 both have drop call issues. Music works flawlessly, but whenever I receive a call or try to call someone, the connection always drop after a while. I have had the drop call issue with the HBHDS980 on other Win Mobile phones. I am just wondering if others have issues with stereo bluetooth head set. I have a blueant V1 which works flawlessly for calls but it's not stereo.

    How do you mean car update? The head unit is aftermarket not built-in so the car itself does not have Bluetooth. It's worth noting (I forget whether I already did or not) that the Bluetooth streaming works perfectly with my iPhone 5 just not with the Sony. I'm now on my second Xperia Z2 as the first one's call quality was abysmal. While this one seems a **bleep** of a lot better this Bluetooth streaming issue is actually doing my head in and making me want to change phones completely.

Maybe you are looking for

  • How to add multiple reports in single

    Hi, I have to develop a report which contains two reports. Ex: first one is Year Revenue 2008 10000 2009 30000 2010 20000 G.Total 60000 and seconds report is Year Product Units 2008 Biztec 2000 2009 FunProd 1000 my requirement is that i want to devel

  • Upload into datetime

    Hi i have an csv file which i have a date time column which i need to upload to mysql database column with is formatted as datetime the problem i have is the csv is formatting the date time as mm-dd-yyyy hh:mm:ss which will not upload i have tried up

  • Form for Gr against Prod order.

    Hi I need a form for Gr against Prod order.. the form be trigerred once the Prod oder is saved... Can you pl let me know the smartform for the same which can be used in this ... Thanks in advance

  • Report painter execution error - GR657 - set does not contain any entries

    Hello, During our execution of report we are getting the below error: Set 0102PCBT1IPROVDIV in set 0002$ZA13#######ROW0236 does not contain any entries Message no. GR657 Diagnosis You cannot use empty sets to define reports.  The single-dimension set

  • Multiple Sliding Effects & Events

    Hey peeps I have been looking at the Spry samples and the API but I just can't figure out how to do this and was wondering if somoene could help. I have a page that dynamically creates some DIV elements based on the number of records in a database ta