Bluetooth Related Issues with Car kits regarding webOS post 1.4.0.

We are trying to collect data for all customers that are having issues related to pairing their Palm Pre to car kits, however this data is spread among tons of threads and many different boards. To resolve this we would like to consolidate this list down to one board and tell you up front what information we need.
If you are having issues around using Bluetooth with your Car Kit please post the information in this thread. 
Please also use this template so it is easiest for us to extract this data
Make/Model:
Year:
Carkit Model info (Manufacturer, firmware version, etc):
Details of problem: (e.g. pairing drops, static on the line, buttons mapped incorrectly, etc)
webOS version:
Included in compatibility list:
To find out if your carkit is listed on Palm's compatibility chart see here
http://kb.palm.com/wps/portal/kb/common/article/50373_en.html

Make/Model: BMW 325I
Year: 2006
Carkit  Model info: Latest firmware for the 3-series.
Details: Will not connect with bluetooth carkit. Both bluetooth and Pre discover each other but does not connect with each other. The Pre shows that its connected with the car but the car does not connect to the phone.
webOS: 1.4.0
Included in compatibilty list: Yes
It connected and paired up fine before the update to webOS 1.4.0, had no issues with 1.3.5.1. The phonebook functionality also worked fine with the previous version of WebOS

Similar Messages

  • Re: Bluetooth Related Issues with Car kits regarding the Palm Pre Post 1.2.1

    Make/Model:  Nissan Maxima
    Year:  2007
    Carkit Model info (Manufacturer, firmware version, etc):  OEM with Nav
    Details of problem: (e.g. pairing drops, static on the line, buttons mapped incorrectly, etc) 
    Since updating to webOS 1.3.5, the connect and disconnect problems have mostly gone away!  Thank you Palm! 
    One minor complaint still with Bluetooth (if you are listening Palm):  The Nissan OEM kit supports up to 4 phones.  I paired my wife and kid's phones to the car, including my Pre.  When any other family member is in the car with me with their phone (non-Pre), my Pre will not connect to the car.  Their phones connect just fine even though my phone has been paired to the car to be the "primary" phone.  Only when I am by myself in the car will the Pre Bluetooth connect/disconnect work flawlessly.   Thanks again for getting us this far!
    webOS version:  1.3.5

    We are trying to collect data for all customers that are having issues related to pairing their Palm Pre to car kits, however this data is spread among tons of threads and many different boards. To resolve this we would like to consolidate this list down to one board and tell you up front what information we need.
    If you are having issues around using Bluetooth with your Car Kit please post the information in this thread. 
    Please also use this template so it is easiest for us to extract this data
    Make/Model:
    Year:
    Carkit Model info (Manufacturer, firmware version, etc):
    Details of problem: (e.g. pairing drops, static on the line, buttons mapped incorrectly, etc)
    webOS version:
    Included in compatibility list:
    To find out if your carkit is listed on Palm's compatibility chart see here
    http://kb.palm.com/wps/portal/kb/common/article/50373_en.html
    Further information:
    Please remove all previous pairing from both devices and carkits before deeming it an "issue." We attempt to diagnose and identify all issues, however some issues are simply resolved by removing pairing from both the device and the carkit and then resetting the connection back up.
    It may be important to check back regularly. If it becomes an issue that we would like to diagnose further we may ask for help from the community by contributing log files from the device.
    You may receive a PM from me or another Palm employee asking for this information (we can be identified by orange logo's next to the name).
    Message Edited by HardBeatZ on 01-19-2010 02:36 PM

  • Ios 5.0.1 + Iphone 4 bluetooth connection issue with car stereo

    My Iphone 4 will not connect with my new JVC car stereo I have spoken to JVC customer support and they say its an Apple issue that they need to fix (changed something with the bluetooth connection scripts in the latest update update, as they have done before).
    The phone finds the stereo and then tries to pair with it, however half way through the pairing process the phone losses connection with the stereo and the pairing is then deleted.
    I have deleted all the existing pairing in the phone memory and ensured that the stereo has been rebooted to ensure no conflict of previous installs would effect the process
    Does anyone know if Apple are going to fix this glitch in a new softwre update (and if so when is it being released) as at the minute i have an expensive stereo which is cant use to its full ability?

    Similar problems occured when Apple released iOS 4 last year. It was NOT fixed with an update from Apple. It was fixed by the system vendors and automakers releasing updates for their equipment. There are ongoing complaints from people with some Toyota built cars (Toyota and Lexus) with some systems as well as some BMW drivers.
    I'm willing to bet money that the head unit you have is not fully standards compliant. Unfortunately, getting JVC to admit that is going to be nearly impossible. I suspect they will just quietly issue an update sometime in the next few months. Assuming the head unit can be updated by the end user at all.  You may have to resort to an inexpensive visor mount speaker phone in the mean-time.

  • Bluetooth connection issue with car stereo

    Hi,
    I have a N8-00, with the current belle software on it.
    With my car Bluetooth it will connect and function properly when I first add the device (N8) to the car Bluetooth, but if I turn the ignition off and then back on again it won't pair, if I try to manually do it, it just comes up with error without a code.
    Deleting the device and trying to re-pair it wont work unless I restart my phone, and I am unable to turn Bluetooth off on my phone until after restarting it.
    This is getting very frustrating. 
    Please help!!

    Similar problems occured when Apple released iOS 4 last year. It was NOT fixed with an update from Apple. It was fixed by the system vendors and automakers releasing updates for their equipment. There are ongoing complaints from people with some Toyota built cars (Toyota and Lexus) with some systems as well as some BMW drivers.
    I'm willing to bet money that the head unit you have is not fully standards compliant. Unfortunately, getting JVC to admit that is going to be nearly impossible. I suspect they will just quietly issue an update sometime in the next few months. Assuming the head unit can be updated by the end user at all.  You may have to resort to an inexpensive visor mount speaker phone in the mean-time.

  • How can I stop receiving email automatically from the community when they have issues with there problems regarding the apple products.

    How can I stop receiving email automatically from the community when they have issues with there problems regarding the apple products.

    Click here for the instructions on stopping the emails.
    (85713)

  • Wacom or Bluetooth Mouse issues with most recent Beta??

    Wacom or Bluetooth Mouse issues with most recent Beta??
    All I was wondering if anyone was having issues with Lightrooms beta and pointing devices… while I’m sure the Wacom Introus4 is dying in Lightroom I can’t verify that my Mouse is as well.
    I’m using the most recent Beta of Lightroom and Wacom Tablet Driver 615-3a… I’m sure the issue dosent reside with another program because the tablet only stops working in Lightroom. Basically I loose all tablet functionality until I reboot whin I attempt to access the Film Strip… I’ve repeated a few times and with each it dies…

    Unfortunately, although you are getting problems with your Wacom and Lr, the solution for the short term is to re-install an older driver for the tablet until Wacom come up with a new update to fix the prolem. This has been a long running problem for users when operating Lr with Wacom tablets.
    (I offer this solution not from personal experience, but from what other tablet users have reported in previous threads, and there have been several).

  • Bluetooth issues with car with iOS 8.0.2 and iPhone 5

    I am still experiencing issues with connection my phone to my brand new car, after updating to iOS8, and now iOS 8.0.2.
    I can connect to the bluetooth, but this gives me a phantom call, my car keeps telling me that an incoming call is inbound. I cannot receive or make any phonecalls, I have only access to my contacts list.
    I have tried to remove my car on my devices list, changed the name of the phone, changed the password. Did a reset of the phone.
    Deleted all network connections on the phone, and reset the phone completely. And also restarted my car.
    Still the same issues.
    I did not have any issues with iOS7. And my car is a brand new Mazda 3 2014, with the latest firmware to the car. So i know for sure this is the iOS 8's fault.

    after avoiding the hassle with the troubled IOS 8, IOS 8.0.1, i upgraded to 8.0.2. which I believed to be bugless, the iPhone 5 didn't function in my car (2014 model) anymore. It had worked flawless with IOS 7....
    I'f got phantom calls, freezing the cars display and blocking the radio, in the second the bluetooth connection to the phone is established.
    incoming calls go to the phone and at the cars system is nothing to hear.
    Active calls from the car remain silent, even on the car display it looks like there is a connection, only the music is switched off.
    Hopefully Apple staff is reading here and will change this situation soon.
    Why is the possibility to officially downgrade to IOS 7.1.2 canceled by Apple ??
    Is there still an unofficial possibility to downgrade a non-jailbreaked iPhone?
    In the older iTunes backup?

  • Issues with Car Bluetooth and the 9630

    Hey guys,
    Over at the crackberry forums there are many people reporting issues with the tour and car bluetooth.  Basically, for people that are syncing the tour with the bluetooth in their cars, people can barely hear them.  We can hear everyone just fine, but when talking the person on the other end reports that our voice is very low.  This is happening on VZW, Sprint, Bell and Telus, which leads me to belive this is an issue with the OS itself.  The link to the discussion at crackberry is http://forums.crackberry.com/f141/car-bluetooth-tour-issue-they-can-t-hear-me-well-267206/  I'm hoping someone from RIM cam comment on this or provide some help.  This is a VERY frustrating issue to Tour owners especially with so many places having "hands free" laws.
    Thanks!

    Greetings from Charleston!
    I was using a Verizon 8830 World Edition until I upgraded to the Verizon Blackberry Tour on launch day July 12.  I never had any Bluetooth issues before and I'm not having any now.  As a matter of fact, I would say the quality is a tad better.  My volume is controlled by my car when the Blackberry is connected via Bluetooth and I've actually had to turn it down sometimes because it has been so loud.  I drive a 2007 Toyota Landcruiser.  I suspect it has less to do with the Blackberry than it does with the car.  Perhaps there's a Bluetooth software/firmware update necessary for some of your vehicles?
    All in all, I love this new Blackberry!!
    Cheers! 

  • Next G models compatible with car kits and antenna...

    Help!
    I currently have a CK-7W car kit with a soon to be obsolete 6235 CDMA handset. I am frustrated by the lack of quality handsets available on Telstra's new Next G service. The current 6120 Nokia only has bluetooth connectivity and no patch lead connectivity to external aerial. Has anyone heard if Nokia will be releasing a Next G model that will have a cradle compatible with the CK-7W car kit or any other hard wired car kit/antennae coupler or patch lead compatibility?

    Make/Model: BMW 325I
    Year: 2006
    Carkit  Model info: Latest firmware for the 3-series.
    Details: Will not connect with bluetooth carkit. Both bluetooth and Pre discover each other but does not connect with each other. The Pre shows that its connected with the car but the car does not connect to the phone.
    webOS: 1.4.0
    Included in compatibilty list: Yes
    It connected and paired up fine before the update to webOS 1.4.0, had no issues with 1.3.5.1. The phonebook functionality also worked fine with the previous version of WebOS

  • Compatibility with Car Kit (CD-IB100 II Adapter- Pioneer)

    Hi, ive recently purchased a new ipod nano but ive been disappointed to find that it is not compatible with my car kit adapter, however the car kit is compatible with previous versions of the ipod.
    Can anyone advise if there is a possiblity of a compatibility connector that can be purchased to resolve these issues?
    Regards
    http://www.pioneer.co.uk/uk/products/25/38/301/CD-IB100%20II/specs.html

    I use the same adapter, had the same issue with my iPhone.
    The adapter is using the old way of charging which is the Firewire pins but all iPods from about 2007 all charge with the USB pins only.
    I did a search on the web and found a little converter you plug between the iPod and the cable which enables charging. There are different versions if you search, some also remove the not compatible message from the screen.

  • Bluetooth buggy issues with iphone 5s after ios 8 upgrade

    I am having issues with my Handsfreelink in my 2013 Honda Pilot after the ios 8 upgrade.Basically, music works the phone does not. 
    What I have tried:
    1) Hard reset
    2) deleted and re-setup all bluetooth settings on both phone and car
    I suspect this is a bug in ios8 that needs to be addressed. On a sidenote I am also unable to plug my phone into the USB port on the car, now says unsupported.

    The same thing happened to me on my 2012 Subaru Outback.  I'm not sure this will help you since you have a Honda, but I'm posting this just in case.
    I paired the audio on my car with my iPhone 6.  However, when I turned the car off and back on again, the iPhone would not pair automatically.  I had to manually connect the iPhone with the car.  Turns out there are two separate bluetooth pairings on my car: one for phone which allows up to 5 devices and one for audio which allows only one device.  So I did the second bluetooth pairing for the phone (had already done the audio), and that fixed it.  YMMV

  • IPhone 4s bluetooth wont work with car

    My Blackberry bold and iPhone 4 were absolutely fine with 3 different cars. I have just upgraded to the iPhone 4s and now the phone connects to the bluetooth but doesnt work properly. It rings and the screen shows that there is a call there, it even turns the radio off but the voice is coming out of the hadset. In previous versions i think you could select Audio Device 'in call' but you cant on the 4s. I have tried it in an Audi, a new Volvo and a BMW so i think that the car kits should be fairly up to date. Please help as i do lots of work miles during the day when on the phone.

    i would try turning the bluetooth off and reconnect it and if that does not work reset your phone for it may be something wrong with it. if nothing else works you may have to bring it to the apple store, becuase the 4s you may have may have a bad bluetooth connector. hopes this helps

  • Anyone noted Bluetooth connection issues with iPhone 4s and Ford sync?

    My wifes iPhone 4 with IOS 5.0.1 auto connects to Ford Sync at least 75% of the time on first attempt. My new iPhone 4S with IOS 5.0.1 takes 4-5 attempts and rarely if ever connects without multiple attempts. Any one else seeing issues with failed Bluetooth connections with iPhone 4S phones?

    Look at the right panel for links to other threads concerning problems with Fords. And it's not just Fords, cars in general.  No solutions seem to be given.

  • Iphone work with car kits?

    I have a 2005 Range Rover which sucessfully pairs with the 3G. It shows as one of the audio sources on the phone. It sucessfully rings thru the car speaker, but once it answers the source stays on bluetooth option, but can only be heard thru the phone. When I have a second incoming call come in and answer with my phone, it then emits thru the car speakers. Is anybody else having this problem?

    I have a similar issue. Have a 07 Range Rover Sport. Phone dials out ok from the car. It also pairs fine automatically. But 70-80% of the time when I receive a call and answer thru the steering button, the call connects but I can not hear the caller nor the caller me. No contacts sync up. Call history does not sync up either. Land Rover web site claims iphone 3g is fully compatible. Have an appt to update the bluetooth software in the car.

  • Using locked E72 with car kit

    I have an annoying problem with my E72. When my phone automatically locks after 5 min (push from our IT department) I can not use it to make out going calls when using my car kit. I used to be able to do this with my BB bold 9000 but I have been able to figure this out with the E72. I am able to receive calls.
    Any suggestions?
    Thanks, Rodnag

    Hi danny.
    Yeah, they're already off.
    Basically, every alert is turned off except for incoming calls.
    I know i must sound fussy, but when you're listening to music, you don't really want gaps of silence in it, do you?
    Steve
    Nokia Enthusiast

Maybe you are looking for