Bluetooth resets all the time

since install 4.3 my phone restarts or turns off bluetooth. It happen in my car, my headset and even my head phones. How do I fix this

Thats the offline mode option, I assume..
that isn't the one I meant. if you open the desktop menu (by pressing the top of the screen when the desktop is visible, there should be a button labeled "Internet connection".. if you click that, you should see an option "Disconnect blah" where blah is the wireless network you're connected to..
select that to disconnect from the wireless network.. OR select the 3G connection (which has a round icon with two arrows in it)
that will switch over to 3G..
That's all I did to get my bluetooth working.. it isn't a permanent fix, but it does demonstrate the problem..

Similar Messages

When bluetooth headset is connected to iphone,I can't hear iphone ringing aloud when I have a call or a text. Do i really have to wear the bluetooth headset all the time in my ear to know when I have a call or a message? Why it doesnt ring through iphone?

when bluetooth headset is connected to iphone,I can't hear iphone ringing aloud when I have a call or a text. Do i really have to wear the bluetooth headset all the time in my ear to know when I have a call or a message? Why it doesnt ring through iphone but it rings through the bluetooth headsets?
In other phones, you can hear the phone ringing and if it was connected to bluetooth, you could pick up the call from the bluetooth headset.
Here with iphone, if its connected to bluetooth headset, it only rings through the headset, which means that if you dont have the headset in the ear all the time, you cannot know that you have an incoming call or message.
Any ideas - solutions - comments please?

I'm having the same problem. I had a plantronics 975 (which I lost, sadly). When connected, the ringer would always be routed through the bluetooth and the iPhone's external speaker. When in silent mode, the iPhone would only vibrate, but I could still hear the ringer in the bluetooth.
I just bought a new Plantronics Voyager+. Now when it's connected, all sounds are routed to the earpiece - including the taps, etc. The iPhone's speaker doesn't ring at all, unless the bluetooth is disconnected or powered off. I'd really like to be able to hear both, like I was before. This is an iPhone 3G running iOS 4 (latest version, not sure what it is exactly). Haven't updated software/firmware in between bluetooths, just changed the earpiece.

Does leaving the bluetooth on all the time drain the battery?

Does leaving the bluetooth on all the time drain the battery?

In my experience, the impact is minimal, especially on something like an iPhone 5S. Mine is on all of the time because I use it all of the time, mostly for my Pebble Smartwatch but also for headsets and speakers.
Best of luck.

IPod Touch 4th keeps reseting all the time!!

Hey everybody! I really hope that you guys can help me..
I was trying to exclude an app and then I decided to reset my ipod touch 4th. Now, it keeps reseting all the time by itself! The ipod don't turn off or even less turn on.. What can I do??

- Connect the iPod to your computer. If iTunes sees the iPod then restore the iPOd.
- Next see if recovery mode will allow iTunes to see the iPod so your can restore it. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
- Then try DFU mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Then, let the battery fully drain and then charge and try again.
- Last, make an appointment at the Genius Bar of an Apple store.

Reset all the time Ipod Classic 80gb

Hello,
I have a question and I hope one of you can answer me.
I got an iPod classid 80GB for a long time already,
When i had my iPhone 4s I had to update iTunes so I did.
Later I wanted to put new music on my iPod classic, connected but it took a while before it connected to my PC
and i had to reset all settings and all the music was gone.
So I did reset everything, everything was gone so I connected again and I had to reset it again, again and again.
Everytime I connect my iPod classic to my PC it has to be reset because it's in 'Reset modus', and can't put any music on it.
I hope somebody had this problem already or know this problem that can help me out.
Thanks,,
Mats

Are any other USB devices connected to your PC when you reconnect it?
Have you seen this article?
Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear
B-rock

Phone really slow and needing hard reset all the time now.

I recently updated my Droid Razr Maxx HD to the latest OTA. Since then it has become very slow and unstable. Every two or three days I will have to perform a hard reset. Going to the apps page is fine sometimes then other times it takes forever to load. Has anyone else had problems like this and if so have you been able to fix it?
Thanks
Gabe Lundy

Update are meant to improve your device gabriellundy! I know how frustrating it must be to have to complete a hard reset on your phone multiple times. Have you tried running your phone on safe mode with out any applications? I would recommend to try this to determine if a third party app is causing issues to your device. To run your phone on safe mode click http://vz.to/12vTROa If you need further assistance with your phone, please feel free to reach out to us for further assistance.
Thank You,
MichelleL_VZW
VZW Support
Follow us on Twitter @VZWSUPPORT

My iphone 4s shuts off automatically, and i can't turn it on with just the power button i need to do the "reset" all the time. it's been happening since sunday and today is already tuesday. what is happening?

OS - 6.1.3
After it turns off it gets put into " recovery mode". and even if i do the "restart", i have to do it several times before the phone actually turns on. phone is 1 year and 5 mos old. already tried to restore it but it just keeps on shutting down. can anybody help?

Hi, thank you very much for your reply. No my phone was never been jailbreak-ed. Never been dropped in water or in any wet surface. Dropped on the floor while texting yes, but it was just a one time incident, last year august i can clearly remember, but after that no more (phone still works fine even after.) restored the phone again earlier, but problem still occured. Will try to go to Apple also to ask and have it checked. Just worried because my phone is already out of warranty. Will keep you posted. Again, thanks. If you have any more advice just let me know. It would mean a lot.
Cheers,
N

Newly fetched settings getting reset all the time (provisioning of SPA 122)

The initial configuration works and is pretty much a sample file that sets some defaults and resets the provisioning rule to fetch an encrypted file with this information:
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<flat-profile xmlns="http://www.sipura.net/xsd/SPA122" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.sipura.net/xsd/SPA122 http://www.sipura.net/xsd/SPA122/SPA122-1-3-2-014.xsd">
<Resync_Periodic ua="na">3600</Resync_Periodic>
<Resync_Error_Retry_Delay ua="na">3600</Resync_Error_Retry_Delay>
    <Display_Name_1_ ua="na">number</Display_Name_1_>
    <User_ID_1_ ua="na">number</User_ID_1_>
    <Password_1_ ua="na">password</Password_1_>
    <Use_Auth_ID_1_ ua="na">No</Use_Auth_ID_1_>
    <Auth_ID_1_ ua="na"></Auth_ID_1_>
    <Resident_Online_Number_1_ ua="na"></Resident_Online_Number_1_>
    <SIP_URI_1_ ua="na"></SIP_URI_1_>
    <Display_Name_2_ ua="na"></Display_Name_2_>
    <User_ID_2_ ua="na"></User_ID_2_>
    <Password_2_ ua="na"></Password_2_>
    <Use_Auth_ID_2_ ua="na">No</Use_Auth_ID_2_>
    <Auth_ID_2_ ua="na"></Auth_ID_2_>
    <Resident_Online_Number_2_ ua="na"></Resident_Online_Number_2_>
    <SIP_URI_2_ ua="na"></SIP_URI_2_>
</flat-profile>
I can see in /admin/config.xml on the adapter that it downloads and loads the settings for only a couple of seconds, but then quickly reverts back to the settings it had before downloading these - what is going on??
Regards,
Mikael

Seems my SPA122 is broken, the same procedure works when I tried another one. Yawn!

Ipod need to be reset all the time

Hi recently my Ipod is acting weird. if i don turn it on for 1 day the following day i need to reset it else nothing happens.
Is this supposed to be happening? I didn't hv this problem before.

Anita,
I know you said that you need to reset your iPod (and by that I take it to mean you have to do it yourself), but are you aware that the iPod resets itself after being left inactive for a period of 36 hours or so?
See iPod Sleep.

My iPad has a glitch and I have to reset all the time.

My iPad has a glitch and I have restore it already. Also I've reset it as we'll. it seems like it is ten steps ahead of me sometimes. Is there anything that I missed that I could use to fix this problem.

Try a hard reset. You won't lose anything. If you need to do a restore, your computer should back your iPod up first. Instructions in link below.
Troubleshooting 101
Some topics covered
-Basic troubleshooting steps
-Hard reset instructions
-Manual restore instructions
-Hardware troubleshooting
-Preventive Maintenance
-Anti-theft & recovery tips
-Battery-saving tips
-Repair options
-Contacting Apple
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

IPod resets all the time for no reason...

Everyday when i get in my car i go to turn on my iPod and it loads the Apple screen. It stays there for about 15 seconds then the main menu loads. Then if i turn it on a couple hours later it does the same thing. Why does this happen? Help.

That's completely normal behavior when the iPod has been shut off for a bit.
Diane Wordsmith

HT201263 my ipad give me the apple sign without running up it appears all the time in the screen , i tries to reset my ipad , but still in this problem , can you please help me?

my ipad give me the apple sign without running up it appears all the time in the screen , i tries to reset my ipad , but still in this problem , can you please help me?

You may want to look at this about using recovery mode to restore your iPad.
http://support.apple.com/kb/ht4097

My iphone 3 bluetooth is searching all the time

my iphone 3 bluetooth is searching all the time ,it is not working properly
ple solved this problems

That's completely normal. Everytime you open up the bluetooth settings menu, it will indicate the bluetooth is searching. It stops when you get out of the menu.

HT3887 Hi I have just got some new wWas iireless head phones and when I use them with the Bluetooth on my iPhone 4S it breaks up all the time even from short distance but when using my girlfriends iPhone 5 or iPad it's fine no problems atall!!! Any ideas

Hi I have just got some wireless head phones and while using Bluetooth with my iPhone 4S the sound breaks up all the time but if I use a friends iPhone 5 or my iPad it's fine no problems atall! Any ideas what the problem could be people??????

Unpair the headset from the phone with the problem. Restart the phone (hold HOME and SLEEP until an Apple logo appears), the pair the headset again. Also, look for things nearby that may be causing interference in the Bluetooth band. Cordless phones are a common cause of interference.

I have Safari on an HP desktop running Windows 7, 64-bit. When I want to clear the history from Safari, the "Reset Top Sites Also" button is always checked. This can cause problems. Any way to have it unchecked all the time?

I have Safari on an HP desktop running Windows 7, 64-bit. When I want to clear the history from Safari, the "Reset Top Sites Also" button is always checked. This can cause problems. Any way to have it unchecked all the time?

Welcome to the HP Forums Hinalover,
I see by your post that you are having issues with the print spooler on the Windows 7 computers.
I can help you with this issue.
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
Try running the Microsoft Fix It Tool to see if it will fix the print spooler.
Diagnose and repair Windows File and Folder Problems automatically.
You can also run the System File Checker to repair corrupted or missing files.
System File Checker: Run sfc /scannow & analyze its logs in Windows 7 | 8.
You might end up having to do a repair of Windows.
Please let me know the results.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Bluetooth resets all the time

Similar Messages

Maybe you are looking for