Bluetooth soft blocked, wont unblock

Question

Hello,
my laptop's bluetooth adapter is not working due to the hci0 interface being soft blocked.
Unblocking with
# rfkill unblock all
doesn't have any effect at all - 'rfkill list' still shows
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
1: hci0: Bluetooth
Soft blocked: yes
Hard blocked: no
No matter what I do, the device just won't unblock. The adapter has been working fine in an earlier installation of Arch.
Howewer, if i boot into emergency mode using the option 'systemctl.unit=emergency.target' on the kernel command line and then load my bluetooth and wifi modules manually, both devices appear unblocked and hciconfig shows the correct info for my adapter. If i then change into a higher "runlevel" in systemd, the graphical ui starts and hci0 is irrevocably soft blocked again.
How do I proceed? How can I find out which kernel modules and/or pieces of software in my boot process block the bluetooth device?
The laptop is a quite dated ASUS F3JC with a BT-183 bluetooth adapter connected via usb.
lsusb:
Bus 001 Device 004: ID 05e1:0501 Syntek Semiconductor Co., Ltd DC-1125 Webcam
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 0b05:1712 ASUSTek Computer, Inc. BT-183 Bluetooth 2.0+EDR adapter
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.6-2-ARCH (tobias@testing-i686) (gcc version 4.8.1 20130725 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Aug 13 10:20:52 CEST 2013
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b7fbffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b7fc0000-0x00000000b7fcdfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000b7fce000-0x00000000b7ffffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: ASUSTeK Computer Inc. F3JC /F3JC , BIOS 205 08/11/2006
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0xb7fc0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FE0000000 write-back
[ 0.000000] 2 base 0A0000000 mask FF0000000 write-back
[ 0.000000] 3 base 0B0000000 mask FF8000000 write-back
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
[ 0.000000] [mem 0x37000000-0x373fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
[ 0.000000] [mem 0x30000000-0x36ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x2fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
[ 0.000000] BRK [0x01751000, 0x01751fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x3780c000-0x37bfdfff]
[ 0.000000] Allocated new RAMDISK: [mem 0x3740c000-0x377fd6a3]
[ 0.000000] Move RAMDISK from [mem 0x3780c000-0x37bfd6a3] to [mem 0x3740c000-0x377fd6a3]
[ 0.000000] ACPI: RSDP 000f7ac0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT b7fc0000 0003C (v01 A M I OEMRSDT 08000611 MSFT 00000097)
[ 0.000000] ACPI: FACP b7fc0200 00084 (v02 A M I OEMFACP 08000611 MSFT 00000097)
[ 0.000000] ACPI: DSDT b7fc0460 080FB (v01 F3J00 F3J00001 00000001 INTL 02002026)
[ 0.000000] ACPI: FACS b7fce000 00040
[ 0.000000] ACPI: APIC b7fc0390 0005C (v01 A M I OEMAPIC 08000611 MSFT 00000097)
[ 0.000000] ACPI: MCFG b7fc03f0 0003C (v01 A M I OEMMCFG 08000611 MSFT 00000097)
[ 0.000000] ACPI: BOOT b7fc0430 00028 (v01 A M I OEMBOOT 08000611 MSFT 00000097)
[ 0.000000] ACPI: OEMB b7fce040 00046 (v01 A M I AMI_OEM 08000611 MSFT 00000097)
[ 0.000000] ACPI: TCPA b7fc8560 00032 (v01 A M I TBLOEMID 00000001 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2055MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] BRK [0x01752000, 0x01752fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
[ 0.000000] HighMem [mem 0x377fe000-0xb7fbffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xb7fbffff]
[ 0.000000] On node 0 totalpages: 753502
[ 0.000000] free_area_init_node: node 0, pgdat c15b3340, node_mem_map f5d0c020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 223230 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4112 pages used for memmap
[ 0.000000] HighMem zone: 526274 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] e820: [mem 0xb8000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f5cde000 s33344 r0 d24000 u57344
[ 0.000000] pcpu-alloc: s33344 r0 d24000 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 751726
[ 0.000000] Kernel command line: BOOT_IMAGE=/__active/boot/vmlinuz-linux root=UUID=08c6ea4e-4d83-4417-8177-5dfcae41f3b6 ro rootflags=subvol=__active resume=/dev/sda2 elevator=deadline
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 6028792 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:000b7fc0)
[ 0.000000] Memory: 2971976k/3014400k available (4168k kernel code, 42032k reserved, 1736k data, 596k init, 2105096k highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc15c5000 - 0xc165a000 ( 596 kB)
.data : 0xc141205e - 0xc15c4400 (1736 kB)
.text : 0xc1000000 - 0xc141205e (4168 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f5008000 soft=f500a000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] tsc: PIT calibration matches PMTIMER. 1 loops
[ 0.000000] tsc: Detected 1662.525 MHz processor
[ 0.006668] Calibrating delay loop (skipped), value calculated using timer frequency.. 3326.59 BogoMIPS (lpj=5541750)
[ 0.006673] pid_max: default: 32768 minimum: 301
[ 0.006723] Security Framework initialized
[ 0.006731] AppArmor: AppArmor disabled by boot time parameter
[ 0.006746] Mount-cache hash table entries: 512
[ 0.007051] Initializing cgroup subsys memory
[ 0.007062] Initializing cgroup subsys devices
[ 0.007065] Initializing cgroup subsys freezer
[ 0.007068] Initializing cgroup subsys net_cls
[ 0.007071] Initializing cgroup subsys blkio
[ 0.007109] CPU: Physical Processor ID: 0
[ 0.007112] CPU: Processor Core ID: 0
[ 0.007115] mce: CPU supports 6 MCE banks
[ 0.007123] CPU0: Thermal monitoring handled by SMI
[ 0.007134] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
[ 0.007235] Freeing SMP alternatives: 16k freed
[ 0.008229] ACPI: Core revision 20130328
[ 0.015305] ACPI: All ACPI Tables successfully acquired
[ 0.016681] ftrace: allocating 18673 entries in 37 pages
[ 0.026778] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.027249] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.062035] smpboot: CPU0: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz (fam: 06, model: 0f, stepping: 06)
[ 0.063333] Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.063333] perf_event_intel: PEBS disabled due to CPU errata
[ 0.063333] ... version: 2
[ 0.063333] ... bit width: 40
[ 0.063333] ... generic registers: 2
[ 0.063333] ... value mask: 000000ffffffffff
[ 0.063333] ... max period: 000000007fffffff
[ 0.063333] ... fixed-purpose events: 3
[ 0.063333] ... event mask: 0000000700000003
[ 0.083410] CPU 1 irqstacks, hard=f50d0000 soft=f50d2000
[ 0.083414] smpboot: Booting Node 0, Processors #1 OK
[ 0.009999] Initializing CPU#1
[ 0.009999] CPU1: Thermal monitoring handled by SMI
[ 0.096648] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.096675] Brought up 2 CPUs
[ 0.096679] smpboot: Total of 2 processors activated (6652.18 BogoMIPS)
[ 0.098255] devtmpfs: initialized
[ 0.098255] PM: Registering ACPI NVS region [mem 0xb7fce000-0xb7ffffff] (204800 bytes)
[ 0.098255] RTC time: 18:54:58, date: 08/14/13
[ 0.098255] NET: Registered protocol family 16
[ 0.098255] ACPI: bus type PCI registered
[ 0.098255] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.098255] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.098255] PCI: not using MMCONFIG
[ 0.098424] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6
[ 0.098426] PCI: Using configuration type 1 for base access
[ 0.098573] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.098575] mtrr: probably your BIOS does not setup all CPUs.
[ 0.098577] mtrr: corrected configuration.
[ 0.100101] bio: create slab <bio-0> at 0
[ 0.100123] ACPI: Added _OSI(Module Device)
[ 0.100123] ACPI: Added _OSI(Processor Device)
[ 0.100123] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.100123] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.104817] ACPI: EC: Look up EC in DSDT
[ 0.107007] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.126746] ACPI BIOS Bug: Warning: Incorrect checksum in table [TCPA] - 0x00, should be 0xDE (20130328/tbutils-324)
[ 0.130091] ACPI: SSDT b7fc85a0 00475 (v01 AMI CPU1PM 00000001 INTL 02002026)
[ 0.130592] ACPI: Dynamic OEM Table Load:
[ 0.130596] ACPI: SSDT (null) 00475 (v01 AMI CPU1PM 00000001 INTL 02002026)
[ 0.130731] ACPI BIOS Bug: Warning: Incorrect checksum in table [SSDT] - 0x4C, should be 0xC5 (20130328/tbutils-324)
[ 0.130738] ACPI: SSDT b7fc8a20 00475 (v01 AMI CPU2PM 00000001 INTL 02002026)
[ 0.131241] ACPI: Dynamic OEM Table Load:
[ 0.131245] ACPI: SSDT (null) 00475 (v01 AMI CPU2PM 00000001 INTL 02002026)
[ 0.131518] ACPI: Interpreter enabled
[ 0.131546] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568)
[ 0.131553] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
[ 0.131574] ACPI: (supports S0 S3 S4 S5)
[ 0.131577] ACPI: Using IOAPIC for interrupt routing
[ 0.131608] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.134342] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.134348] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) (size reduced!)
[ 0.134350] PCI: Using MMCONFIG for extended config space
[ 0.134373] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.134504] ACPI: No dock devices found.
[ 0.162419] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.162572] acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.162576] acpi PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.162580] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.162584] acpi PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[ 0.162587] acpi PNP0A08:00: host bridge window [mem 0xb8000000-0xffffffff] (ignored)
[ 0.162591] PCI: root bus 00: using default resources
[ 0.162595] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.162749] PCI host bridge to bus 0000:00
[ 0.162755] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.162758] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.162762] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.162776] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000
[ 0.162919] pci 0000:00:01.0: [8086:27a1] type 01 class 0x060400
[ 0.162979] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.163030] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.163145] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.163171] pci 0000:00:1b.0: reg 10: [mem 0xfebfc000-0xfebfffff 64bit]
[ 0.163286] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.163348] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.163415] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 0.163535] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.163602] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.163672] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[ 0.163792] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.163863] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.163926] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[ 0.164046] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.164118] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.164185] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.164248] pci 0000:00:1d.0: reg 20: [io 0xec00-0xec1f]
[ 0.164335] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.164396] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.164458] pci 0000:00:1d.1: reg 20: [io 0xe880-0xe89f]
[ 0.164546] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.164604] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.164666] pci 0000:00:1d.2: reg 20: [io 0xe800-0xe81f]
[ 0.164756] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.164818] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.164880] pci 0000:00:1d.3: reg 20: [io 0xe480-0xe49f]
[ 0.164972] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 0.165047] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.165075] pci 0000:00:1d.7: reg 10: [mem 0xfebfbc00-0xfebfbfff]
[ 0.165192] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.165292] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.165356] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.165486] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.165554] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
[ 0.165679] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.165689] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.165697] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.165706] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0250 (mask 000f)
[ 0.165824] pci 0000:00:1f.2: [8086:27c4] type 00 class 0x010180
[ 0.165849] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007]
[ 0.165863] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003]
[ 0.165877] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007]
[ 0.165890] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003]
[ 0.165905] pci 0000:00:1f.2: reg 20: [io 0xffa0-0xffaf]
[ 0.165967] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.166048] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.166127] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.166355] pci 0000:01:00.0: [10de:01d7] type 00 class 0x030000
[ 0.166375] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
[ 0.166395] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.166414] pci 0000:01:00.0: reg 1c: [mem 0xfd000000-0xfdffffff 64bit]
[ 0.166438] pci 0000:01:00.0: reg 30: [mem 0xfcfe0000-0xfcffffff pref]
[ 0.166562] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.166574] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.166580] pci 0000:00:01.0: bridge window [mem 0xf9f00000-0xfdffffff]
[ 0.166586] pci 0000:00:01.0: bridge window [mem 0xbdf00000-0xddefffff 64bit pref]
[ 0.166719] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.166747] pci 0000:02:00.0: reg 10: [io 0xc800-0xc8ff]
[ 0.166793] pci 0000:02:00.0: reg 18: [mem 0xfe0ff000-0xfe0fffff 64bit]
[ 0.166846] pci 0000:02:00.0: reg 30: [mem 0xfe0e0000-0xfe0effff pref]
[ 0.166963] pci 0000:02:00.0: supports D1 D2
[ 0.166967] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.167047] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.167062] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.167069] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 0.167075] pci 0000:00:1c.0: bridge window [mem 0xfe000000-0xfe0fffff]
[ 0.167289] pci 0000:03:00.0: [8086:4222] type 00 class 0x028000
[ 0.167348] pci 0000:03:00.0: reg 10: [mem 0xfe1ff000-0xfe1fffff]
[ 0.167781] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.167911] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.167941] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.167950] pci 0000:00:1c.1: bridge window [mem 0xfe100000-0xfe1fffff]
[ 0.168099] acpiphp: Slot [1] registered
[ 0.168110] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
[ 0.168116] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 0.168123] pci 0000:00:1c.2: bridge window [mem 0xfe200000-0xfe9fffff]
[ 0.168133] pci 0000:00:1c.2: bridge window [mem 0xddf00000-0xdfefffff 64bit pref]
[ 0.168219] pci 0000:06:01.0: [1180:0832] type 00 class 0x0c0010
[ 0.168238] pci 0000:06:01.0: proprietary Ricoh MMC controller disabled (via firewire function)
[ 0.168241] pci 0000:06:01.0: MMC cards are now supported by standard SDHCI controller
[ 0.168259] pci 0000:06:01.0: reg 10: [mem 0xfeaff800-0xfeafffff]
[ 0.168367] pci 0000:06:01.0: PME# supported from D0 D3hot D3cold
[ 0.168394] pci 0000:06:01.0: System wakeup disabled by ACPI
[ 0.168460] pci 0000:06:01.1: [1180:0822] type 00 class 0x080500
[ 0.168486] pci 0000:06:01.1: reg 10: [mem 0xfeaff400-0xfeaff4ff]
[ 0.168594] pci 0000:06:01.1: supports D1 D2
[ 0.168597] pci 0000:06:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.168678] pci 0000:06:01.2: [1180:0843] type 00 class 0x088000
[ 0.168703] pci 0000:06:01.2: reg 10: [mem 0xfeaff000-0xfeaff0ff]
[ 0.168810] pci 0000:06:01.2: supports D1 D2
[ 0.168813] pci 0000:06:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.168891] pci 0000:06:01.3: [1180:0592] type 00 class 0x088000
[ 0.168916] pci 0000:06:01.3: reg 10: [mem 0xfeafec00-0xfeafecff]
[ 0.169022] pci 0000:06:01.3: supports D1 D2
[ 0.169025] pci 0000:06:01.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.169161] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode)
[ 0.169171] pci 0000:00:1e.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.169181] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.169184] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.169218] pci_bus 0000:00: on NUMA node 0
[ 0.169222] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.169225] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.173483] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12)
[ 0.173574] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 12)
[ 0.173662] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 12)
[ 0.173748] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 12)
[ 0.173835] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 12) *0, disabled.
[ 0.173922] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 12) *0, disabled.
[ 0.174010] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 12) *0, disabled.
[ 0.174098] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 12)
[ 0.174404] ACPI: Enabled 3 GPEs in block 00 to 1F
[ 0.174415] acpi root: \_SB_.PCI0 notify handler is installed
[ 0.174470] Found 1 acpi root devices
[ 0.203349] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.203424] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.203424] vgaarb: loaded
[ 0.203424] vgaarb: bridge control possible 0000:01:00.0
[ 0.203427] PCI: Using ACPI for IRQ routing
[ 0.203477] PCI: pci_cache_line_size set to 64 bytes
[ 0.203568] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.203571] e820: reserve RAM buffer [mem 0xb7fc0000-0xb7ffffff]
[ 0.203722] NetLabel: Initializing
[ 0.203724] NetLabel: domain hash size = 128
[ 0.203726] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.203745] NetLabel: unlabeled traffic allowed by default
[ 0.203948] hpet clockevent registered
[ 0.203953] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.203960] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.203966] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.205983] Switching to clocksource hpet
[ 0.211394] pnp: PnP ACPI init
[ 0.211423] ACPI: bus type PNP registered
[ 0.246754] system 00:00: [mem 0xfed13000-0xfed19fff] has been reserved
[ 0.246762] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.266812] pnp 00:01: [dma 4]
[ 0.266850] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.286791] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.326739] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.346824] pnp 00:04: Plug and Play ACPI device, IDs SYN0a06 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[ 0.346868] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.346920] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.347100] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.347105] system 00:07: [io 0x0800-0x087f] has been reserved
[ 0.347109] system 00:07: [io 0x0480-0x04bf] has been reserved
[ 0.347114] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.347118] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.347121] system 00:07: [mem 0xfed45000-0xfed89fff] has been reserved
[ 0.347129] system 00:07: [mem 0xffb00000-0xffbfffff] could not be reserved
[ 0.347133] system 00:07: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.347139] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.347260] system 00:08: [io 0x0250-0x0253] has been reserved
[ 0.347264] system 00:08: [io 0x0256-0x025f] has been reserved
[ 0.347268] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.347272] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.347276] system 00:08: [mem 0xfec10000-0xfec17fff] has been reserved
[ 0.347280] system 00:08: [mem 0xfec18000-0xfec1ffff] has been reserved
[ 0.347284] system 00:08: [mem 0xfec20000-0xfec27fff] has been reserved
[ 0.347289] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.347458] system 00:09: [mem 0xe0000000-0xe3ffffff] has been reserved
[ 0.347464] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.370300] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.370305] system 00:0a: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.370310] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.370314] system 00:0a: [mem 0x00100000-0xb7ffffff] could not be reserved
[ 0.370319] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.370519] pnp: PnP ACPI: found 11 devices
[ 0.370522] ACPI: bus type PNP unregistered
[ 0.408937] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.408952] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.408956] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.408985] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.408989] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.408992] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.408998] pci 0000:00:1c.0: BAR 15: assigned [mem 0xb8000000-0xb81fffff 64bit pref]
[ 0.409003] pci 0000:00:1c.1: BAR 15: assigned [mem 0xb8200000-0xb83fffff 64bit pref]
[ 0.409007] pci 0000:00:1c.1: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.409011] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.409017] pci 0000:00:01.0: bridge window [mem 0xf9f00000-0xfdffffff]
[ 0.409022] pci 0000:00:01.0: bridge window [mem 0xbdf00000-0xddefffff 64bit pref]
[ 0.409028] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.409033] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 0.409041] pci 0000:00:1c.0: bridge window [mem 0xfe000000-0xfe0fffff]
[ 0.409047] pci 0000:00:1c.0: bridge window [mem 0xb8000000-0xb81fffff 64bit pref]
[ 0.409056] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.409061] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
[ 0.409068] pci 0000:00:1c.1: bridge window [mem 0xfe100000-0xfe1fffff]
[ 0.409074] pci 0000:00:1c.1: bridge window [mem 0xb8200000-0xb83fffff 64bit pref]
[ 0.409083] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
[ 0.409088] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 0.409095] pci 0000:00:1c.2: bridge window [mem 0xfe200000-0xfe9fffff]
[ 0.409101] pci 0000:00:1c.2: bridge window [mem 0xddf00000-0xdfefffff 64bit pref]
[ 0.409111] pci 0000:00:1e.0: PCI bridge to [bus 06]
[ 0.409119] pci 0000:00:1e.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.409303] pci 0000:00:1c.1: enabling device (0106 -> 0107)
[ 0.409463] pci 0000:00:1e.0: setting latency timer to 64
[ 0.409469] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.409473] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.409477] pci_bus 0000:01: resource 1 [mem 0xf9f00000-0xfdffffff]
[ 0.409480] pci_bus 0000:01: resource 2 [mem 0xbdf00000-0xddefffff 64bit pref]
[ 0.409484] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 0.409487] pci_bus 0000:02: resource 1 [mem 0xfe000000-0xfe0fffff]
[ 0.409491] pci_bus 0000:02: resource 2 [mem 0xb8000000-0xb81fffff 64bit pref]
[ 0.409494] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.409497] pci_bus 0000:03: resource 1 [mem 0xfe100000-0xfe1fffff]
[ 0.409501] pci_bus 0000:03: resource 2 [mem 0xb8200000-0xb83fffff 64bit pref]
[ 0.409504] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.409507] pci_bus 0000:04: resource 1 [mem 0xfe200000-0xfe9fffff]
[ 0.409511] pci_bus 0000:04: resource 2 [mem 0xddf00000-0xdfefffff 64bit pref]
[ 0.409514] pci_bus 0000:06: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.409517] pci_bus 0000:06: resource 4 [io 0x0000-0xffff]
[ 0.409520] pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffff]
[ 0.409577] NET: Registered protocol family 2
[ 0.409819] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.409864] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.409905] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.409943] TCP: reno registered
[ 0.409947] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.409959] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.410051] NET: Registered protocol family 1
[ 0.410893] pci 0000:01:00.0: Boot video device
[ 0.410920] PCI: CLS 32 bytes, default 64
[ 0.410971] Unpacking initramfs...
[ 0.532133] Freeing initrd memory: 4040k freed
[ 0.535993] Simple Boot Flag at 0x52 set to 0x1
[ 0.536132] apm: BIOS not found.
[ 0.536177] Scanning for low memory corruption every 60 seconds
[ 0.536482] audit: initializing netlink socket (disabled)
[ 0.536501] type=2000 audit(1376506498.533:1): initialized
[ 0.552685] bounce pool size: 64 pages
[ 0.552701] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.555118] VFS: Disk quotas dquot_6.5.2
[ 0.555194] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.555483] msgmni has been set to 1701
[ 0.555858] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.555914] io scheduler noop registered
[ 0.555917] io scheduler deadline registered (default)
[ 0.555967] io scheduler cfq registered
[ 0.556105] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.556191] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.556303] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.556412] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
[ 0.556542] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.556613] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 0.556615] vesafb: scrolling: redraw
[ 0.556618] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.556888] vesafb: framebuffer at 0xc0000000, mapped to 0xf8080000, using 3072k, total 3072k
[ 0.604763] Console: switching to colour frame buffer device 128x48
[ 0.652475] fb0: VESA VGA frame buffer device
[ 0.652524] intel_idle: does not run on family 6 model 15
[ 0.652558] GHES: HEST is not enabled!
[ 0.652575] isapnp: Scanning for PnP cards...
[ 0.965444] isapnp: No Plug & Play device found
[ 0.965514] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.966343] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.968466] i8042: Detected active multiplexing controller, rev 1.1
[ 0.969654] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.969698] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.969734] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.969768] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.969805] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.969961] mousedev: PS/2 mouse device common for all mice
[ 0.970068] rtc_cmos 00:02: RTC can wake from S4
[ 0.970251] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.970287] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.970328] cpuidle: using governor ladder
[ 0.970331] cpuidle: using governor menu
[ 0.970360] drop_monitor: Initializing network drop monitor service
[ 0.970483] TCP: cubic registered
[ 0.970646] NET: Registered protocol family 10
[ 0.970904] NET: Registered protocol family 17
[ 0.970917] Key type dns_resolver registered
[ 0.971138] Using IPI No-Shortcut mode
[ 0.971305] PM: Checking hibernation image partition /dev/sda2
[ 1.004953] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.160012] PM: Hibernation image not present or could not be loaded.
[ 1.160027] registered taskstats version 1
[ 1.160675] Magic number: 9:863:948
[ 1.160692] tty tty5: hash matches
[ 1.160757] rtc_cmos 00:02: setting system clock to 2013-08-14 18:54:59 UTC (1376506499)
[ 1.160876] Freeing unused kernel memory: 596k freed
[ 1.161099] Write protecting the kernel text: 4172k
[ 1.161139] Write protecting the kernel read-only data: 1316k
[ 1.170851] systemd-udevd[46]: starting version 204
[ 1.197848] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 1.199413] ACPI: Lid Switch [LID]
[ 1.199505] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 1.199514] ACPI: Power Button [PWRB]
[ 1.199579] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 1.199584] ACPI: Sleep Button [SLPB]
[ 1.199649] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 1.199654] ACPI: Power Button [PWRF]
[ 1.204924] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 1.205239] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:14/LNXVIDEO:00/input/input5
[ 1.212179] ACPI: bus type USB registered
[ 1.212236] usbcore: registered new interface driver usbfs
[ 1.212255] usbcore: registered new interface driver hub
[ 1.212895] usbcore: registered new device driver usb
[ 1.213778] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.214003] ehci-pci: EHCI PCI platform driver
[ 1.214158] ehci-pci 0000:00:1d.7: setting latency timer to 64
[ 1.214176] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.214187] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.214207] ehci-pci 0000:00:1d.7: debug port 1
[ 1.214247] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.216496] sdhci: Secure Digital Host Controller Interface driver
[ 1.216500] sdhci: Copyright(c) Pierre Ossman
[ 1.216822] sdhci-pci 0000:06:01.1: SDHCI controller found [1180:0822] (rev 19)
[ 1.217908] sdhci-pci 0000:06:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.218118] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 1.218139] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfebfbc00
[ 1.218946] sdhci-pci 0000:06:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.219043] mmc0: SDHCI controller on PCI [0000:06:01.1] using DMA
[ 1.219073] sdhci-pci 0000:06:01.2: SDHCI controller found [1180:0843] (rev 1)
[ 1.219134] sdhci-pci 0000:06:01.2: setting latency timer to 64
[ 1.219219] mmc1: SDHCI controller on PCI [0000:06:01.2] using DMA
[ 1.227078] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.227437] hub 1-0:1.0: USB hub found
[ 1.227444] hub 1-0:1.0: 8 ports detected
[ 1.228033] SCSI subsystem initialized
[ 1.230546] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.230553] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.230562] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.230596] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ec00
[ 1.230825] hub 2-0:1.0: USB hub found
[ 1.230831] hub 2-0:1.0: 2 ports detected
[ 1.231077] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.231083] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.231091] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.231137] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e880
[ 1.231332] hub 3-0:1.0: USB hub found
[ 1.231339] hub 3-0:1.0: 2 ports detected
[ 1.231555] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.231561] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.231569] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.231613] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800
[ 1.231928] hub 4-0:1.0: USB hub found
[ 1.231934] hub 4-0:1.0: 2 ports detected
[ 1.232152] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.232157] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.232165] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.232195] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e480
[ 1.232394] hub 5-0:1.0: USB hub found
[ 1.232400] hub 5-0:1.0: 2 ports detected
[ 1.235551] ACPI: bus type ATA registered
[ 1.236510] libata version 3.00 loaded.
[ 1.236921] ata_piix 0000:00:1f.2: version 2.13
[ 1.237028] ata_piix 0000:00:1f.2: MAP [
[ 1.237031] P0 P2 IDE IDE ]
[ 1.237079] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.237739] scsi0 : ata_piix
[ 1.239669] scsi1 : ata_piix
[ 1.240515] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.240520] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.286748] firewire_ohci 0000:06:01.0: added OHCI v1.0 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[ 1.400663] ata2.00: ATAPI: MATSHITADVD-RAM UJ-841S, 1.00, max UDMA/33
[ 1.400777] ata1.00: ATA-9: SAMSUNG SSD 830 Series, CXM03B1Q, max UDMA/133
[ 1.400782] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.407077] ata1.00: configured for UDMA/133
[ 1.407254] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD 830 CXM0 PQ: 0 ANSI: 5
[ 1.413791] ata2.00: configured for UDMA/33
[ 1.418808] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-841S 1.00 PQ: 0 ANSI: 5
[ 1.422211] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 1.422321] sd 0:0:0:0: [sda] Write Protect is off
[ 1.422325] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.422360] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.424941] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.424945] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.425147] sda: sda1 sda2 sda3
[ 1.425345] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.425709] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.536694] tsc: Refined TSC clocksource calibration: 1662.499 MHz
[ 1.536703] Switching to clocksource tsc
[ 1.540026] raid6: mmxx1 2187 MB/s
[ 1.596677] raid6: mmxx2 2521 MB/s
[ 1.653354] raid6: sse1x1 1347 MB/s
[ 1.710012] raid6: sse1x2 1844 MB/s
[ 1.766690] raid6: sse2x1 2539 MB/s
[ 1.786795] firewire_core 0000:06:01.0: created device fw0: GUID 00e018000366c6ce, S400
[ 1.823342] raid6: sse2x2 2898 MB/s
[ 1.823344] raid6: using algorithm sse2x2 (2898 MB/s)
[ 1.823346] raid6: using ssse3x1 recovery algorithm
[ 1.823755] xor: measuring software checksum speed
[ 1.856671] pIII_sse : 5823.600 MB/sec
[ 1.890003] prefetch64-sse: 6585.600 MB/sec
[ 1.890006] xor: using function: prefetch64-sse (6585.600 MB/sec)
[ 1.898248] bio: create slab <bio-1> at 1
[ 1.899326] Btrfs loaded
[ 1.901248] device label btrfs-root devid 1 transid 28271 /dev/sda3
[ 1.920826] device label btrfs-root devid 1 transid 28271 /dev/sda3
[ 1.921520] btrfs: disk space caching is enabled
[ 1.997973] Btrfs detected SSD devices, enabling SSD mode
[ 2.050028] usb 1-8: new high-speed USB device number 4 using ehci-pci
[ 2.090610] systemd[1]: systemd 204 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 2.092281] systemd[1]: Set hostname to <laptop>.
[ 2.143215] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 2.143313] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.143345] systemd[1]: Starting Remote File Systems.
[ 2.143937] systemd[1]: Reached target Remote File Systems.
[ 2.143956] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 2.144653] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 2.144670] systemd[1]: Starting Delayed Shutdown Socket.
[ 2.145256] systemd[1]: Listening on Delayed Shutdown Socket.
[ 2.145272] systemd[1]: Starting LVM2 metadata daemon socket.
[ 2.145894] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 2.145910] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 2.146567] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 2.146588] systemd[1]: Starting Journal Socket.
[ 2.147146] systemd[1]: Listening on Journal Socket.
[ 2.148771] systemd[1]: Starting Apply Kernel Variables...
[ 2.149957] systemd[1]: Starting Create static device nodes in /dev...
[ 2.151267] systemd[1]: Starting Journal Service...
[ 2.153691] systemd[1]: Started Journal Service.
[ 2.153751] systemd[1]: Starting Setup Virtual Console...
[ 2.154889] systemd[1]: Mounting Debug File System...
[ 2.158188] systemd[1]: Started Load Kernel Modules.
[ 2.158229] systemd[1]: Mounted FUSE Control File System.
[ 2.158309] systemd[1]: Starting udev Kernel Socket.
[ 2.158956] systemd[1]: Listening on udev Kernel Socket.
[ 2.159041] systemd[1]: Starting udev Control Socket.
[ 2.159672] systemd[1]: Listening on udev Control Socket.
[ 2.159749] systemd[1]: Starting udev Coldplug all Devices...
[ 2.161032] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 2.162723] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 2.165879] systemd[1]: Started Set Up Additional Binary Formats.
[ 2.165910] systemd[1]: Mounting POSIX Message Queue File System...
[ 2.167054] systemd[1]: Mounting Configuration File System...
[ 2.168017] systemd[1]: Mounting Huge Pages File System...
[ 2.168927] systemd[1]: Starting Encrypted Volumes.
[ 2.169462] systemd[1]: Reached target Encrypted Volumes.
[ 2.169488] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 2.169557] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 2.169583] systemd[1]: Expecting device dev-disk-by\x2duuid-b81c8e6c\x2db02e\x2d4782\x2d8f55\x2d0634200a2438.device...
[ 2.170567] systemd[1]: Mounting Temporary Directory...
[ 2.171694] systemd[1]: Starting File System Check on Root Device...
[ 2.174125] systemd[1]: Started Apply Kernel Variables.
[ 2.229260] btrfs: use ssd allocation scheme
[ 2.229265] btrfs: disk space caching is enabled
[ 2.231634] systemd-udevd[132]: starting version 204
[ 2.400039] usb 2-2: new full-speed USB device number 2 using uhci_hcd
[ 2.487626] ACPI: AC Adapter [AC0] (on-line)
[ 2.489829] ACPI: Requesting acpi_cpufreq
[ 2.513467] tsc: Marking TSC unstable due to TSC halts in idle
[ 2.513560] ACPI: acpi_idle registered with cpuidle
[ 2.513817] Switching to clocksource hpet
[ 2.539293] Linux agpgart interface v0.103
[ 2.545200] asus_laptop: Asus Laptop Support version 0.42
[ 2.578741] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.590461] r8169 0000:02:00.0: irq 44 for MSI/MSI-X
[ 2.590748] r8169 0000:02:00.0 eth0: RTL8168b/8111b at 0xf8d06000, 00:17:31:dc:87:ff, XID 18000000 IRQ 44
[ 2.590753] r8169 0000:02:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[ 2.610406] asus_laptop: F3JC model detected
[ 2.616416] cfg80211: Calling CRDA to update world regulatory domain
[ 2.711866] intel_rng: FWH not detected
[ 2.717356] ACPI: Battery Slot [BAT0] (battery present)
[ 2.724805] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[ 2.724811] iwl3945: Copyright(c) 2003-2011 Intel Corporation
[ 2.730422] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 2.747517] r592 0000:06:01.3: setting latency timer to 64
[ 2.750104] r592: driver successfully loaded
[ 2.762781] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 2.816731] usb 4-1: new full-speed USB device number 2 using uhci_hcd
[ 2.827059] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.827065] ACPI: Thermal Zone [THRM] (54 C)
[ 2.827477] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input7
[ 2.833861] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 2.835775] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 2.835882] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 2.838475] ACPI Warning: 0x00000828-0x0000082f SystemIO conflicts with Region \PMIO 1 (20130328/utaddress-251)
[ 2.838484] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.838489] ACPI Warning: 0x000004b0-0x000004bf SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[ 2.838494] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.838497] ACPI Warning: 0x00000480-0x000004af SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[ 2.838502] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.838505] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 2.838797] ACPI Warning: 0x00000400-0x0000041f SystemIO conflicts with Region \SMB0 1 (20130328/utaddress-251)
[ 2.838804] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.847585] leds_ss4200: no LED devices found
[ 2.878609] microcode: CPU0 sig=0x6f6, pf=0x20, revision=0x48
[ 2.883133] iwl3945 0000:03:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 2.883140] iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 2.883226] iwl3945 0000:03:00.0: irq 46 for MSI/MSI-X
[ 2.888784] microcode: CPU1 sig=0x6f6, pf=0x20, revision=0x48
[ 2.888867] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 2.920615] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 2.963540] systemd-udevd[154]: renamed network interface eth0 to enp2s0f0
[ 3.003960] iTCO_vendor_support: vendor-support=0
[ 3.011389] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 3.011434] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0860)
[ 3.011598] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.043559] systemd-udevd[158]: renamed network interface wlan0 to wlp3s0
[ 3.044516] nvidia: module license 'NVIDIA' taints kernel.
[ 3.044521] Disabling lock debugging due to kernel taint
[ 3.130966] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 3.131299] NVRM: loading NVIDIA UNIX x86 Kernel Module 304.88 Wed Mar 27 14:31:12 PDT 2013
[ 3.157181] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.186255] Bluetooth: Core ver 2.16
[ 3.186357] NET: Registered protocol family 31
[ 3.186360] Bluetooth: HCI device and connection manager initialized
[ 3.186370] Bluetooth: HCI socket layer initialized
[ 3.186374] Bluetooth: L2CAP socket layer initialized
[ 3.186383] Bluetooth: SCO socket layer initialized
[ 3.187775] usbcore: registered new interface driver usbhid
[ 3.187779] usbhid: USB HID core driver
[ 3.213962] hid-generic 0003:04D8:003F.0001: hiddev0,hidraw0: USB HID v1.11 Device [Microchip Technology Inc. Simple HID Device Demo] on usb-0000:00:1d.0-2/input0
[ 3.222741] usbcore: registered new interface driver btusb
[ 3.310753] device label btrfs-root devid 1 transid 28271 /dev/sda3
[ 3.413401] Adding 4194300k swap on /dev/sda2. Priority:-1 extents:1 across:4194300k SSFS
[ 3.606690] r8169 0000:02:00.0: Refused to change power state, currently in D3
[ 3.645174] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008/0x0, board id: 3655, fw id: 30712
[ 3.685857] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11
[ 4.780165] r8169 0000:02:00.0: Refused to change power state, currently in D3
[ 4.780840] r8169 0000:02:00.0 enp2s0f0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[ 4.781391] r8169 0000:02:00.0 enp2s0f0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[ 4.781939] r8169 0000:02:00.0 enp2s0f0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[ 4.782536] r8169 0000:02:00.0 enp2s0f0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[ 5.446743] r8169 0000:02:00.0 enp2s0f0: rtl_phy_reset_cond == 1 (loop: 100, delay: 1).
[ 5.447280] r8169 0000:02:00.0 enp2s0f0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[ 5.448694] r8169 0000:02:00.0 enp2s0f0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[ 5.449244] r8169 0000:02:00.0 enp2s0f0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[ 5.449794] r8169 0000:02:00.0 enp2s0f0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[ 5.452267] r8169 0000:02:00.0 enp2s0f0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[ 5.452819] r8169 0000:02:00.0 enp2s0f0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[ 5.453796] r8169 0000:02:00.0 enp2s0f0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[ 5.453852] r8169 0000:02:00.0 enp2s0f0: link up
[ 5.469508] iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9
lsmod:
fuse 65687 2
joydev 7339 0
btusb 16196 0
hid_generic 749 0
usbhid 36609 0
bluetooth 270982 2 btusb
hid 70462 2 hid_generic,usbhid
crc16 1091 1 bluetooth
nvidia 10233640 42
iTCO_wdt 4471 0
iTCO_vendor_support 1545 1 iTCO_wdt
arc4 1628 2
coretemp 4926 0
microcode 9872 0
psmouse 85523 0
serio_raw 3969 0
pcspkr 1487 0
i2c_i801 9873 0
of_i2c 1774 1 i2c_i801
snd_hda_codec_si3054 2898 1
snd_hda_codec_realtek 30721 1
r592 10291 0
lpc_ich 11197 0
memstick 6008 1 r592
iwl3945 48472 0
acpi_cpufreq 9230 0
iwlegacy 41637 1 iwl3945
snd_hda_intel 29956 2
mperf 991 1 acpi_cpufreq
mac80211 390928 2 iwl3945,iwlegacy
snd_hda_codec 126979 3 snd_hda_codec_realtek,snd_hda_codec_si3054,snd_hda_intel
snd_hwdep 4746 1 snd_hda_codec
snd_pcm 63876 3 snd_hda_codec_si3054,snd_hda_codec,snd_hda_intel
cfg80211 339123 3 iwl3945,iwlegacy,mac80211
snd_page_alloc 5974 2 snd_pcm,snd_hda_intel
snd_timer 14942 1 snd_pcm
snd 44383 11 snd_hda_codec_realtek,snd_hda_codec_si3054,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
r8169 51032 0
soundcore 4386 1 snd
i2c_core 19967 3 i2c_i801,of_i2c,nvidia
intel_agp 8688 0
intel_gtt 10172 1 intel_agp
asus_laptop 16521 0
mii 3375 1 r8169
agpgart 22047 3 nvidia,intel_agp,intel_gtt
thermal 7112 0
sparse_keymap 2582 1 asus_laptop
rfkill 12682 4 cfg80211,asus_laptop,bluetooth
input_polldev 2142 1 asus_laptop
processor 24819 3 acpi_cpufreq
battery 5589 0
evdev 7528 13
ac 2668 0
btrfs 768232 1
crc32c 1276 1
libcrc32c 714 1 btrfs
xor 19412 1 btrfs
zlib_deflate 18140 1 btrfs
raid6_pq 89831 1 btrfs
sr_mod 13055 0
sd_mod 28246 3
cdrom 29900 1 sr_mod
ata_generic 2434 0
pata_acpi 2367 0
ata_piix 20856 2
libata 149163 3 pata_acpi,ata_generic,ata_piix
scsi_mod 108355 3 libata,sd_mod,sr_mod
firewire_ohci 27462 0
firewire_core 44471 1 firewire_ohci
crc_itu_t 1095 1 firewire_core
sdhci_pci 9751 0
sdhci 25111 1 sdhci_pci
mmc_core 85568 2 sdhci,sdhci_pci
uhci_hcd 21416 0
ehci_pci 3404 0
ehci_hcd 42552 1 ehci_pci
usbcore 152075 5 btusb,uhci_hcd,ehci_hcd,ehci_pci,usbhid
usb_common 1172 1 usbcore
video 10027 0
button 3685 0
I'm running kernel version 3.10.6-2-ARCH.
Many thanks

Answer 1

OK, so I think this is pretty much solved, or at least a workaround:
I use E17 (or E18 now I guess), and using econmann GUI I can enable bluetooth! rfkill list now results in
$ rfkill list
0: asus-wlan: Wireless LAN
Soft blocked: no
Hard blocked: no
1: asus-bluetooth: Bluetooth
Soft blocked: no
Hard blocked: no
2: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
3: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
It would be interesting to know why rfkill wasn't able to power the bluetooth on, yet econnman was. Any ideas?