Bluetooth sometimes does/sometimes doesn't play app sounds

My iPad Air is successfully connecting to a Bose SoundLink II speaker with no problem. Third party app sounds and music, however, sometimes play through the Bose speaker, but mostly play through the iPad speakers . . . even when the iPad shows that the Bose speaker IS connected.
When 3rd party app music is playing through the Bose, the control center in the app shows AirPlay and that Bose is the selected output (though it gives me the option of choosing the iPad speakers). When that same app is playing through the iPad speakers, however, the control center does not show AirPlay and so does not give me the choice of choosing the Bose speakers.
Any ideas? The app I'm trying to use is called SoundCue (a very cool app BTW) and had been working flawlessly with my iPhone 5S and previous iPads. Also, I reset the Bose and cleared all previously paired devices from it.
Thanks for any ideas/help!
Rick

I listen to my music throughout the day, but sometimes when I go back to listen to my music on my droid x it will tell me that my phone does not support that media type. It will do this to all music I have on the phone. But when I shut the phone down and bring it back up the music works fine. I have had to do this 5 times and I have only owned the phone for about a week. Any suggestions?

Similar Messages

Mail doesn't play any sound with new Gmail emails

I just signed for a Gmail account but I see it works in a someway different manner from the other email accounts I have. I noticed that Mail shows me a new incoming email almost immediately since I click send from another account, that's a good thing, but unfortunately it doesn't play any sound, like instead it does when I receive emails on the other accounts.
any suggestions?

I have noticed with 10.6.x Mail doesn't make sounds when receiving/sending Mail when you first launch it. However if I leave it open (just minimize it) and let it run and Mail goes get new email sound suddenly makes the sounds. I am still trying to figure out why it is happening (on both of my Macs). If you get any idea please share it because I would like to know also.

What's the wave's number of iPhone 4S speakers? I need to know what's the number because my phone doesn't play any sounds, and I kind of knew what's the problem and sulotion!

What's the wave's number of iPhone 4S speakers? I need to know what's the number because my phone doesn't play any sounds, and I kind of knew what's the problem and solution!
What I mean by wave is like radio channels' waves! Ex. 104.1

Your statement makes no sense.
Have you tried basic troubleshooting from the User's Guide to rule out some setting in the device preventing the speaker from working?
Is the mute switch on?
Do other sounds work?
Does it produce sound with headphones plugged in?

When I connect my iphone to a Bluetooth system, the music doesn't play through the speakers?

When I connect my iPhone to a bluetooh system, the music doesn't play through the speakers?

Hi there JAMESPARKER1999,
I would recommend taking a look at the bluetooth troubleshooting steps found in the article below.
iOS: Troubleshooting Bluetooth connections
-Griff W.

MacBook Doesn't Play Startup Sound

Hey guys, for some reason, my Mac doesn't play a startup sound when ever its booting up and the volume is on max. Any ideas as to what might cause this?
I'm running Mac OS X 10.7.3 (Lion)

Had this same thing after the 10.7.3 update.
Try turning the computer off for a time, 10 minutes to whatever number of hours.
Then when you turn it back on hold down the Option key and when the boot menu screen come up select your Macintosh HD to boot from. Once booted to the OS go into Sys Pref, Start Up Disk and select the Macintosh HD and Restart.
Also I have noticed that the startup, Boot POST (Power On Self Test) sound is of a lower volume then it was before the 10.7.3 update. No matter what the volume is set to in the OS. Apple trying to get rid of that obnoxious sound so people will actually reboot their computer more often.

TS3274 why does my ipad not play any sounds or music?

Why does my ipad 2 wi-fi not play any sounds or music?

if it plays when you connect a headset then
https://discussions.apple.com/thread/1343532?start=315&tstart=0
more
https://www.google.dk/search?client=opera&q=iphone+stuck+in+headphone+mode&sourc eid=opera&ie=utf-8&oe=utf-8&channel=suggest

Javascript doesn't play() embedded sound

This is a question about the PDF specification regarding how to use the javascript API
to play a sound object.
Specifically, why in my basic example is the javascript able to see the sound,
but can't play() it?
I have a test PDF illustrating my problem at
http://www.affexion.net/test/PDF/test-scriptsound.pdf
This is a stripped down example.
The sound is referenced from a simple annotation
on the left. Double-clicking it plays the sound as expected.
On the right is a button which when activated is supposed to
execute a javascript.
<< /S /JavaScript /JS ( console.show(); try {this.sounds[0].play(); } catch(e) { console.println(e.toString()); } console.println(this.sounds[0].name); ) >>
I see the console open up, and I see it print the name of the sound "mySound",
but I don't get the sound played.
Do I need to do something in my javascript before I call this.sounds[0].play?
Is there some other mistake in the way I have the sound object embedded and referenced?
Thanks very much for any help.

In followup, I have been able to accomplish what I wanted:
use an embedded javascript to play an embedded sound
For future readers, my example is (temporarily) at:
http://www.affexion.net/test/PDF/sound-by-script.pddf
How I did it:
interaction of 2 components, the script and the (named) sound
The script object looks like:
<< /S /JavaScript
/JS ( console.show\(\); var s=this.getSound\("mySound"\); s.play\(\); )
>>
The named sound "mySound"
The catalog needs an entry pointing to a name dictionary, like:
1 0 obj << /Type /Catalog /Names XX 0 R >> endobj
The name dictionary has an entry /Sound like
XX 0 obj << /Sound XY 0 R >> endobj
Then the actual name mapping:
XY 0 obj << /Names [ (0xFEFFmySound) XZ 0 R ] >> endobj
With the sound object at:
XZ 0 obj << /Type /Sound /Length NNNNN >> stream...endstream endobj
Key point: the string object (0xFEFFmySound) needs to be unicode-16 encoded
with the first 2 bytes being FEFF.
That was a real pitfall for me.
Now that whole setup actually works.
Sadly, though - I looked all through the PDF specification and
in section 7.7.4 Name Dictionary, I don't see any Sound key.
If anyone could explain how that sequence of Name dictionary to
sound name is described in the specification, I'd appreciate it.

IOS/android - how to mute music player sound when playing app sound?

Hi,
I am trying to achieve the following, in an app for iOS and Android devices:
My app contains information that, under certain circumstances, are being read to the user. If the user is playing music using f.i. iPod, i would want the external sound to fade down, read the info, then fade back up. I have seen (heard) this on apps such as RunKeeper, where voice feedback is 'superimposed' over existing media sound, which is faded down for the duration of the voice feedback.
i am using Adobe Air 3.9 sdk, using Sound, SoundChannel and SoundMixer with AudioPlaybackMode set to MEDIA, VOICE and AMBIENT.
When setting AudioPlaybackMode to VOICE, the background audio stops, yet there is no way of restarting it without activating ipod and hitting play....
Any pointers, be they to extensions or other resources, are greatly appreciated!
- Fred

Hello slhendridl,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Troubleshooting car stereo connections
http://support.apple.com/kb/ts3581
Bluetooth
Car stereos with Bluetooth may allow you to pair a device that can play calls or music through the car speakers. Ensure that your car stereo supports the A2DP Bluetooth profile before attempting to pair an iPod with it.
Note: iPhone can also connect using the HFP Bluetooth profile because it uses HFP to make phone calls through your stereo speakers. iPod devices do not have this protocol (because iPod devices aren't phones).
You can check for the A2DP Bluetooth profile by attempting to play music from your iPhone through your stereo speakers using Bluetooth. If calls route to the stereo speakers but music doesn't, it might not support A2DP. Contact the manufacturer or refer to your car stereo's user guide to see if your device is compatible.
Learn more about Bluetooth.
Have a nice day,
Mario

Mac mini doesn't play stereo sound over HDMI

My Mac mini (2012) is connected to my home theatre via HDMI. While playing a 5.1 channe movie will play through the speakers fine, a stereo source will only play through the Mac's speakers. This is true with iTunes Store content - if I slect Audio 1 (Stereo) it plays through the Mac speakers, if I select Audio 2 (5.1) it plays through my home theatre).
Any suggestions?

There are also some DVD sets with lots of supplement material on their discs, that you can only run with Interactual's DVD Player for the Mac. Sadly, this software you need 10.6.8 or earlier to run:
http://player.interactual.com/default.asp?code=PU
See this tip on doing that if you have a Mac made on or after the release of 10.7:
https://discussions.apple.com/thread/3913218
Or just run Windows:
https://discussions.apple.com/docs/DOC-2741

AV Receiver doesn't play TV sound

Hi, we recently purchased the STRDH550 Sony AV system to work with out Samsung UHD TV. The components etc play through their respective inputs just fine, but I can't get the TV to play sound through the AV system. The TV Out component on the AV receiver is linked via HDMI 1.4 to the HDMI 1 input on the TV; the TV recognizes the AV system and I can even adjust the volume on the AV system using my TV remote. But no sound. Any advice? thanks, Jonathan

Hi jgood986,
Please check the links below for further assistance.
https://us.en.kb.sony.com/app/answers/detail/a_id/33135/p/41901,43145,92877,92878/c/65,66/kw/arc
https://us.en.kb.sony.com/app/answers/detail/a_id/30194/p/41901,43145,92877,92878/c/65,66/kw/arc
https://us.en.kb.sony.com/app/answers/detail/a_id/35104/p/41901,43145,92877,92878/c/65,66/kw/arc
Thanks,
>Joffrey
If my post answers your question, please mark it as "Accept as Solution"

My fullscreen playback doesn't play any sound

I just go the latest iTunes update (as of 19th of September, 2013) and since then I haven't been able to play any of my movies, tv shows or podcasts with sound! Why is this? Please help ASAP!

OK - I had this issue with iTune movies downloaded from store, newly with iTunes 11.1, affecting all movies, even those that were once fine. The sound plays fine (Apple cinema display & sound) in large window mode but disappears on fullscreen (repeatably, coming back if fullscreen is exited).
A fix that works for me is to switch back and forth between playing on this (my) machine and another local authorised machine using Airplay - of course you can do this without interrupting playback and without exiting fullscreen using the button on the control bar. On re-selecting 'computer' after allowing the switch to complete the sound comes though fine, and this seems more-or-less stable once done*. I do not know if the other machine works, too (it is a server with no normally-on display).
FTR things that do NOT work include permnissions repair, reboot, re-alunch iTunes etc.
*PS - it works but is not stable; you can switch in and out of fullscreen without losing sound but if you switch movies (or come back to a movie previously watched) you have to go round the loop again. We need 11.2 please Apple!

Sequence doesn't play the sound.. help?

Hey..
I've just got FCE4 and I've encountered some problems. I've managed to overcome the "Not Rendered" issue, but now while I play the imported video already on the timeline, on the canvas, no sound is played. Not from the .dv files, and not from the mp3 file I just imported... This is a pain in the bottom, because I'm trying to make a narrational clip (like a review, you know) and without sound, I can't even start really editing what I want to do..
is there a solution to this?
thanks

okay.. so I have EyeTV 250 Plus with which I can export to the following applications:
Web
iMovie (tho its broken)
iMovie HD (tho its broken)
iDVD
DVD Studio Pro
Toast
PSP
PSP (H.264)
Apple TV
iPhone
iPod (Best)
iPod (Smallest)
iPod (Fastest)
iTunes
Native formats (no re-encoding):
MPEG Program Stream
MPEG Elementary Streams
QuickTime Formats:
DV
DV 16:9
HDV 720p
HDV 1080i
QuickTime Movie
MPEG-4
H.264
3G
DivX AVI
AAC Audio
Apple Lossless Audio
Any of these good for FCE?
And for sound.. I'm making stuff in GarageBand 08.. I can export to mp3 and aac.. or something else? maybe direct input into FCE from GB08? if not, is there a program that converts these to to AIFF?

Quicktime X doesn't play avi sound

Hello, my quicktime player can open the video files but there will be no sound! It only happens for .avi though. Is there a certain codec I need or something?

[Perian codecs for Quicktime|http://www.perian.org] - plugins to add functionality to Quicktime for playing additional audio and video formats
[Quicktime audio problems, Perian, VLC|http://discussions.apple.com/message.jspa?messageID=9013669] - read note about uninstalling prior DIVX support before installing Perian.

Hi guys , when I tap a song on my iPod touch it plays the wrong song and sometimes it comes up with the now playing screen but no matter how many times I press play it doesn't play ,what's wrong with my ipod

When I play a song on my iPod it immediately skips a song and sometimes doesn't play any song at all

- Try a reset. It cvures many ills.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync and then resync the music
- Restore from backup
- Restore to factory defaults/new iPod.

Music album cover images and track titles show on iPhone 4s but music doesn't play - any ideas?

I am a Young at Heart Senior, new to iPhone 4s, have an old creaking pc with Windows XP Home.....but plan to enter the real world any day soon by buying a new Mac!
Here is my problem, I purchased an album on iTunes and mistakenly started to sync it to my phone, (although I don't have iCloud loaded on my pc). I stopped it mid download and later noticed that the total track numbers were showing as a red number above the "more" button as if they were waiting to complete the download. It stayed there while I thought about it for a few days, but when I click the Album button all the tracks are listed.
Now to the funny part.....when I click on a track or indeed any of them, it doesn't play a sound...but the progress bar above moves as if "now playing".
So, I thought.... no problem, I would connect the phone up to iTunes and delete the tracks....but when I do so, this album and none of it's track titles show in my music list for the phone......weird.
So, I have a large album with titles only on my phone, no music behind the titles (which, incidentally, is rubbish anyway) and I can't get rid of it off my phone, any of you young whizzy iPhoners have any ideas how to clear it off???
I did think I might just Restore my phone, but wondered whether downloading all my stuff from iCloud would still include the dreaded "Now That's What I Call Christmas" album, which I only purchased in late 2011 to play at a seniors Xmas party...........you live and learn!
You will guess from my ramblings that I am not at all techy, but consider myself willing to learn and apart from this hiccup........I luuuurve my iPhone!

If you have all your music on the cmputer then i would connect up my phone uncheck the Sync Music option and apply.
This should take all the music off your phone .Then you can resync the music back on to it.
If this doesn't work maybe a restore to factory settings and start from scratch is the way to go

Bluetooth sometimes does/sometimes doesn't play app sounds

Similar Messages

Maybe you are looking for