Bluetooth speaker suddenly is too silent

I have a bluetooth speaker connectet with my ipad2. It worked always well. Since a few weeks, when I want to listen to the music on my ipad with the bluetooth speakers, the sound is very silent. The same with every app: radio app, music app and so on. I already had a look into my settings, but everything is fine.
I Also connected my ipod with these speakers, and there, the music sound is loud as ever. So it must have something to do with the ipad.
ANybody an idea?

Hello, BerlinSunset.
Thank you for visiting Apple Support Communities.
I understand that you are experiencing issues with sound from your Bluetooth speakers with your iPad. Sometimes the issue may simply be resolved by pairing the devices again. Also, try adjusting the sound when playing music. When experiencing issues with Bluetooth connections, here are a couple articles I would recommend going through.
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
iOS: Third-party Bluetooth accessories
http://support.apple.com/kb/ht1664
Cheers,
Jason H.

Similar Messages

HT204368 I have a Tango TRX bluetooth speaker that is suddenly not able to connect to my New iPad. It worked fine for a few eeks and now I get the previously unseen "This device not supported by iPad" message. It was supported for three weeks. Thanks

Most of the question is in the discussion header. I have a Tango TRX bluetooth speaker that worked fine for three weeks with my third generation iPad. I started having trouble connecting and recieved the "not supported by iPad" message. It connects just fine until I open any app that requires sound and at thet point I recieve the message and the device disconnects. The Tango still pairs flawlessly with my laptop which is not an Apple product. How could a product suddenly become unsupported?

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
Try a reset. Press & hold the Power and Home buttons simultaneously, ignoring the red power off slider, until the Apple logo appears. Then release both buttons. This should not affect any content on the iPad, it is similar to rebooting your computer.

MUSIC SKIPPING OR PLAYING TOO FAST WHEN PAIRED WITH A BLUETOOTH SPEAKER?

Hi
I am writing to help others with this problem - there seem to be a number of posts about this, which have not been resolved.
I have just bought a Veho bluetooth speaker, which pairs and works perfectly with my brother's phone. However, although it does pair with my iPhone 4S, when I playback any music from my library, it sounds like a chipmunk is singing - it plays far too quickly and sometimes skips large parts of the song.
This is a firmware issue but can easily be solved by downloading the free app 'TuneMob' from the store (it is free). You can simply add albums from your library to its interface and it plays them perfectly through any speaker, irrespective of which OS you have installed. I hope this helps you!
MAV

Try resetting the PMU/SMU and PRAM/NVRAM. You'd need to identify the mode of resetting depending on the model of your G5 iMac. The Apple support sites that would help you for this are –
http://support.apple.com/kb/HT1436
http://support.apple.com/kb/HT1939
http://support.apple.com/kb/HT1767
http://support.apple.com/kb/HT1379
I hope this solves your problem.

..the strange case of radio fm and bluetooth speak...

Hi everyone,
I've just bought a bluetooth speaker ("Supertooth disco") and I successfully connected it to my Nokia N79.
It works fine with music stored in my mobile, but I can't get it work with radio fm.
Obviusly I know that earphones are needed: I connect them to my nokia, and then I select the option which activates speakers. But the result is that sound comes from my mobile's speakers, not my - already connected - bluetooth speaker.
However I noticed a very strange phenomenon:
- While radio is running on mobile speakers, I disconnect and rapidly reconnect earphones
- Suddenly my bluetooth speaker disconnects too and reconnects on his own
- As soon as it reconnects, for a couple of seconds... sound finally comes from the bluetooth speaker!
-...but then comes back to my mobile's speakers.
This fact made me think that there is a way to send radio sound to my bluetooth speaker. It seems that "something", at a certain moment, takes it back to the phone.. if only I could stop that "something", I could happily listen to my radio using the bluetooth speaker.
What do you think about that? Any idea of what's happening?
Thank you very much to any creative person who will take care of this issue

Hi everyone,
I've just bought a bluetooth speaker ("Supertooth disco") and I successfully connected it to my Nokia N79.
It works fine with music stored in my mobile, but I can't get it work with radio fm.
Obviusly I know that earphones are needed: I connect them to my nokia, and then I select the option which activates speakers. But the result is that sound comes from my mobile's speakers, not my - already connected - bluetooth speaker.
However I noticed a very strange phenomenon:
- While radio is running on mobile speakers, I disconnect and rapidly reconnect earphones
- Suddenly my bluetooth speaker disconnects too and reconnects on his own
- As soon as it reconnects, for a couple of seconds... sound finally comes from the bluetooth speaker!
-...but then comes back to my mobile's speakers.
This fact made me think that there is a way to send radio sound to my bluetooth speaker. It seems that "something", at a certain moment, takes it back to the phone.. if only I could stop that "something", I could happily listen to my radio using the bluetooth speaker.
What do you think about that? Any idea of what's happening?
Thank you very much to any creative person who will take care of this issue

Flash sound stops working after I pair my Macbook Pro with a Bluetooth speaker. What's going on?

I have a 2012 17 inch MBP, and regularly pair it with a Jambox bluetooth speaker for music. After pairing it, sound frequently stops working in Flash - Youtube videos and the like. Only restarting seems to do the trick. What's disabling the sound, and is there a way to re-enable it without the hassle of restarting?
Cheers, community
-G

Not enough memory, page-outs is too large
8.91 GB Page-outs
After removing adware, and do a safe boot of Safari and remove extensions, then reset cache history etc. You need to do a boot into Recovery Mode and run Disk Repair from there. Also boot the system in Safe Mode.
On startup it sounds like you have a problem with the directory which would also account for long startups and checking the directory. Along with or instead of DU Repair Disk you can use Single User Mode and fsck -fy to try to fix the directory but in some cases that may not be enough.
Backups from before you got this adware and problems helps and should always be ready and able to restore a system from known good backups or system restore image.
4GB of RAM may have been fine originally but "Early 2011" is now 5 years and 4 OS version changes. You can upgrade the memory and while at it consider a nice SSD internal drive which will help as well. Take a look and see what prices and options there are from http://www.macsales.com for your 2011 MacBook Pro.
http://www.everymac.com
Community for MBP MacBook Pro

Bluetooth Speaker Recognized but Won't Connect to W520 Win7 System

I'm about to return my Creative Bluetooth D100 speaker but thought I'd post here to see if anyone can offer a solution.
The speaker has stopped connecting to bluetooth. It is recognized in the bluetooth control panel. All bluetooth drivers are up to date. My bios is the latest verson. My Lenovo power management and power manager are the latest versions. All my settings are correct (verified by Lenovo tech support.)
I called Lenovo about this issue, they advised to upgrade the Lenovo power manager software and that fixed the problem but only for three days. Then the speaker suddenly stopped being able to connect again. It happened after switching from A/C to AA batteries, but switching back doesn't fix it, nor does resetting the speaker.
Any ideas?
Ellen

Hello Ellentk,
Have you tried unpairing and reseting the bluetooth speakers then repairing them?
here are the instructions to do so: http://support.creative.com/kb/showarticle.aspx?sid=91642
Here is another article that may be helpful: http://support.creative.com/kb/ShowArticle.aspx?sid=89220
Thank you for being a part of the Lenovo Family,
Catie
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Donate KUDOS and Click "Accepted Solution"

Bluetooth speaker causes total bluetooth failure?

I run 10.7.5 on a 27" iMac.
I have a cheap no-name bluetooth speaker (this one) which I like to take into my bedroom and set an iTunes alarm clock. The speaker in the bedroom is so I can hear it. It's only about 20 yards from the computer, through a wall.
It works. But there are often times, in the morning, I wake up and there's no music. I go to the computer and find that there's no bluetooth running at all. My magic mouse is useless. I turn it off and on. Nothing. There's nothing I can do but restart the computer to get bluetooth working again (without the mouse, I cannot find a way to re-start bluetooth pairing). So what's happening is, some times (not all), the iMac kills all bluetooth connections but it only happens when I have this speaker paired up with it.
Anyone have any ideas why this is happening or how I can fix it?
Or, if you could tell me how I might be able to re-pair the mouse without restarting the computer, that'd be great too.
Thanks!

hellew...?

No sound from bluetooth speaker

I bought a bluetooth speaker, just a simple and not too expensive device, a so called StereoBoomm 500. Works perfect on my Xperia Z phone: pair, connect and boomm.... music.. Now i am pairing it with my Z2 tablet, it pairs, connects... but the sound keeps coming from the Z2 tablet's internal speakers. I can change tracks with the volume buttons on the bluetooth speaker, but that is about all, no sound... Anyone got any ideas?
Solved!
Go to Solution.

Well. it seems that I am very much alone with my problem! LOL! But for those who have the same problem and end up on this thread for a solution: I installed the SoundAbout app from the playstore. Stuff's working great now.

Bluetooth speaker does not connect automatically in windows 8.1

before the upgrade (?) to 8.1,if i turned on my bluetooth speaker,it automatically took over from the speakers of my laptop.No drivers,no further changes needed.
After upgrading to 8.1 i have to disconnect the speaker,connect it again,then set the speaker as my standard speaker.then it plays.every time again and again.
how do i fix this?

Me too. It shows that it connects and briefly reads "Connected" and then quickly switches to "Not Connected". My Windows Phone 8, when trying to connect to Windows 8.1 PC via Bluetooth is doing the same thing and I
receive this both from the PC and the phone. My phone does successfully connect to my Bluetooth speaker, but not from the PC only from the phone. Has this been fixed yet and I missed it? One thing
I've learned while being a part of a smaller market share having had a Windows Phone for several years now, the solutions come quietly and sometimes go unnoticed. Only later will I find myself thinking, "Oh yeah it works now, they've created a solution".
Case in point: Red Laser stopped working then shortly thereafter there was the Eye icon available at the Bing screen that can scan just about anything that can be scanned. Is there a similar thing happening with my Bluetooth device drivers from my 8.1
PC and I need to manually push something? When there is a solution, will you please alert me and the rest of this thread? Thanks much in advance!

Bluetooth Speaker Issues

I have an iMac11,1 Core i7, 27" running 10.6.8. I have an external bluetooth speaker that I just started using with this mac. A few issues:
1) When I turn the speaker on, it connects automatically, but it connects in Mono - which has TERRIBLE sound quality. I have to manually disconnect it and reconnect in Stereo. Is there a way for it to automatically connect in Stereo?
2) There is a slight delay in the audio, about a half to a full second. For example, if I'm watching a video, the sound from the bluetooth is delayed. If I disconnect the bluetooth (while letting the video run), the sound is synced when the internal speakers come on; then if I reconnect the bluetooth, it's delayed again.
3) Is there any way to play through both internal speakers AND bluetooth at the same time? (while of course, being synchronized wrt #2 above)
Any suggestions would be appreciated.

Mark, my issue was a result of too much fatigue and too few brains. I had merely forgotten to turn on pairing on my bluetooth device. Once I realized my idiotic mistake, it worked immediately. Don’t know what the problem on your side could be. I believe the newest bluetooth technology (iPhone 6) is backward compatible with the oldest bluetooth technology (headphones) so it should work. Might want to check out this link iOS: Troubleshooting Bluetooth connections Good luck!

Logitech Bluetooth Speaker Adapter Update OS X?

Hi, i bought a logitech z506 5.1 speaker system for my mbp and with it i got a Logitech Bluetooth Speaker Adapter with the set. I then tried to pair my iPhone with the adapter and BAM straight in and playing via bluetooth onto my speakers. But then i tried it with my mbp, no luck, pairs then disconnects and no sound . Phoned logitech and they said that the adapter doesn't work with OS X Lion which is slightly annoying as i just paid £90 for this set and adapter. Anyone know if there will be some sort of update. I doubt it because it is such a small number of people that this effects. Thanks

I am having this problem right now too only difference is that I am using a bluetooth headphone rather than a speaker. The volume is very low and it would disconnect automatically if my bluetooth headphones are not playing any audio. I never had this issue until I updated to 10.7.4. I tried searching for solutions but I couldn't find any. I am hoping as well that someone will find a workaround about this issue.

Bluetooth speaker with pTunes

Device is recognized with Bluetooth setup but when music is selected in pTunes it doesn’t play on bluetooth speaker device. Can anyone help? Is there a better option for MP3 playing on palm 755p? Perhaps its pTunes?
Drew
Post relates to: Treo 755p (Verizon)
Post relates to: Treo 755p (Verizon)

You'll need to install some extra software to enable A2DP broadcasting of Stereo music.
Softick Audio Gateway is the program you're looking for.
http://www.softick.com/bluetooth-audio/
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Roadtrip - Bluetooth speaker or headphones for kids

To help our two kids pass the time on multi-hour drives, we have been trying to play podcasts from the Ipad. However, the ipad speakers are having issues overcoming the road noise. What do you think would work better? 1) Purchasing headphone splitter and plugging in two headphones for them to use or 2) getting a bluetooth speaker? If the latter, any recommendations - given main criteria would probably be loudness vs true audio fidelity?

head phone splitters work great, they're really cheap (around 1$/2$) and the sound in each headphone aren't too low either. better buy it and not be happy with it and buy bluetooth (which I think won't happen) than buying a bluetooth and seing a 1$ splitter would have worked great.

Bluetooth Speaker sometimes missing in the output list

Hi all !
My computer runs on the latest version of Gnome Shell, with pulseaudio as the sound manager.
I have a bluetooth speaker (Creative D100); I can pair it with my computer without any problem, but *sometimes* after having paired it successfully, the speaker doesn't appear in the list of the output device of the Pulseaudio panel. I need to either un-pair the speaker, restart Gnome-Shell, or sometimes even reboot my computer.
It doesn't occur every day, but when it does, that's pretty annoying.
I've searched on the net, but so far I could only find people who simply had a library missing or so, which doesn't seem to be my current problem =/
Does this sound familiar to somebody ?

Hi,
The heading are in the table pt_fcat - you don't seem to be passing that in form....
PERFORM setup_and_display_alv_ver2
USING
it_out_alvp "Parameter structure
it_output[] "Internal Data table(header table)
it_output[]. "Dummy table for Hierarchical ALV!!(item table)
which I guessing in in one of the includes?
Saying that the extract pof code does not show where you are calling form it_out_alv_fieldcat_before ...which populates the headings...
Regards
Stu

How can I simultaneously play music through Bluetooth and AirPlay to my Bluetooth speaker and Apple TV?

Hello, I have recently purchased a new Bluetooth speaker and I would like to use it with my already working home audio system which I control with the airplay feature on my Apple TV. I tried to use the airplay function on my iPhone 4S and connect the 2 at the same time but It would only let me connect one. If there is an app that will allow me to connect the Bluetooth speaker and the Apple TV simultaneously thought my iPhone 4S or any other solution please feel free to let me know. Thanks...

There is not one and it cannot be done at this time.

Bluetooth speaker suddenly is too silent

Similar Messages

Maybe you are looking for