Bluetooth speakers crackling after upgrade

After upgrading to Yosemite 10.10 my Bluetooth audio connection quailty is terrible when using my computer. I'm connected to my iBox twist speakers which worked perfectly on Mavericks. Now if I use my computer, type this message, browse the web, and specifically using mail (literally every key press while in mail causes a jump in the audio) makes the audio crackle and jump. If I leave the computer alone its fine.. Any ideas what I can do?
Apple Bluetooth Software Version: 4.3.0f10 14890

I'd agree with you cept I'm using a iMac mid 2012 which runs bluetooth 4.0 and the only way to keep things in sync is to constantly trash my systems cache every 2 hours and even then its not enough time depending on what applications I run.
My desktop icons as well as those on my external drive

Similar Messages

  • IPhone Bluetooth not working after upgrading to iOS 6.1.2

    I used to pair my iPhone with my Blue&Me system in my Fiat Car and it was working perfectly hitherto. Recently I have been experiencing problems with Pairing my phone with my car Bluetooth system (Which I sometimes use for receiving calls).. The phone though identifies the car system in the discovery mode but is not able to pair  and establish connection. My car Bluetooth system is working just fine with other phones. Request apple / or anyone who can help to help me overcome this issue. My car system is as important to me as iPhone and if this problem persists, i may be forced to change my phone.

    In the 4+ years of using iPhone and several other apple products, this is the first time that I am feeling frustrated with my iPhone 4S and Apple. I am surprised that so many people around the world are facing the problem with their blue tooth devices after upgrading the iOS and still there is no hope of having this situation resolved. The cause of breakage of communication between iPhone (my investment, my ownership) and other devices is of apple origin and apple can't walk away by suggesting that the other party should upgrade the Bluetooth Firmware.
    In my case, My iPhone 4S stopped paring with My Fiat car blue&me system after updating to iOS 6.1.2. The problem has not been solved in iOS 6.1.3.
    If this problem is not solved in next update the ovious solution is to move to android as I can change my phone but I can't change my car that eaisly.

  • Bluetooth Not Working after upgrading to Windows 8.1

    My Laptop is HP Pavilion G6 2015 tx after upgrade to windows 8.1, bluetooth is not working also the battery drain has increased anyone know a fix atleast for bluetooth problem ???

    You're very welcome.
    That is very interesting, because I didn't know of anyone who upgraded to W8.0 with a Ralink wireless card with the BT 3.0 radio that got the BT to work at all.
    We tried the W7 drivers, and they didn't work.
    That is why you don't see a W8 Ralink BT driver for the bluetooth on your PC's support and driver page amongst the other 11 drivers listed.
    The Ralink 3.0 version of BT is not supported in W8.
    While somehow the BT has worked in W8 for you, I'm afraid your luck has run out.
    Unless by some fluke, HP installed a card with the BT 4.0 radio on your model...
    You can try this W8 driver for the Ralink card with the BT 4.0 radio, but don't get your hopes up.
    http://h20565.www2.hp.com/portal/site/hpsc/templat​e.PAGE/public/psi/swdDetails/?sp4ts.oid=5229457&sp​...

  • Folio 13-2000 Bluetooth not working after upgrade to W8.1

    After upgrading to W8 (and later W8.1 64 bit) I cannot connect to my bluetooth speaker (AllLike brand). The speaker works perfectly from Android buy W8.1 does not find it (just says Searching...).
    I have tried to find a bluetooth driver for Folio 13 and W8.1 but I only find it for Windows 7.
    Please help.

    Please ignore this. It suddenly started to work.

  • Bluetooth not working after upgrading to Windows 10

    My laptop is HP Pavilion g4 and its serial number is [Personal Information Removed]. I recently got the upgrade for Windows 10 and installed it. Everything has been working out perfectly EXCEPT the Bluetooth. When I try to upgrade software in Device Manager, it upgrades from Ralink Bluetooth 4.0 Adapter to Mediatek Bluetooth adapter and after I click "ok", the driver reverts back to Ralink Bluetooth 4.0 Adapter. Also, the Bluetooth option itself is not there in the Devices section of settings and it is missing from the notifications tab as well. Occasionally, some Microsoft Bluetooth LE enumerator shows up with a yellow mark next to it. Kindly help me out with this problem!!! Thanks

     Hi Yoloo, I had the same problem and ti's worked for me... Solution of member CharlieK_EU !! I'm using HP Probook 4440-S, W10 Pro, 64-bits. Version  V8.0.1.341   Description Qualcomm Atheros BlueTooth driver
    File Size 96,85 (MBytes) 2015.04.29  update Download from Global (DLM) Global P2P Qualcomm Atheros Bluetooth Driver Link of discussion Good luck!! 

  • "Bluetooth: Not Available" after upgrading to Yosemite

    Hello everyone,
    I just upgraded my MacBook Pro (15" with retina) to Yosemite this morning, and could not use my wireless trackpad correctly anymore (i can't scroll or swipe)
    The bluetooth icon in status bar is grey and says "Bluetooth: Not Available"
    The weird thing is, i'm still using my wireless keyboard and trackpad (i can move the pointer and left-click).
    So the bluetooth module is somehow still working.
    I tried deleting the "com.apple.bluetooth.plist" file, and the SMC reset "fix".
    But it is still .. it remains "not available".
    Any ideas ?

    Hey there CesarD,
    It sounds like your wireless keyboard and trackpad do seem to be working but for some reason the bluetooth icon is grey and you get a message saying that bluetooth is unavailable, even after deleting the bluetooth plist file, and resetting the SMC. I would next do these steps from the following article found here:
    OS X: Bluetooth devices become unresponsive
    Shut down your Mac, disconnect all USB devices for two minutes, start up, and re-connect your USB devices once again.
    If the issue persists, I would next reset your PRAM for good measure:
    OS X Mavericks: Reset your computer’s PRAM
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • I can't get my bluetooth to work after upgrading my iphone 4 to ios 6

    After I upgraded my iphone 4 to IOS 6, i can't get any of my bluetooth connections to work.  Both my headset and my car are not recognized.  I validated that Bluetooth is on in the configuration, but it just keeps searching for devices and never recognizes them.  Is there a setting I'm missing?

    What does the manual say on the wireless speaker on how to connect to other devices?

  • IMac speakers crackling after Mavericks update

    Hello,
    Since updating my early 2013 iMac 27" to OS X Mavericks whenever I play audio (especialy music) through the speakers or headphone port there is a crackling distortion to the sound, this is most apparent on mid to low notes. I believe this to be a software problem rather than a hardware problem as I did not experiance these issues in Mountain Lion before updating to Mavericks. Any help would be much appreciated thank you.

    Last time i had the crackling audio problem was circa 2005.
    The crackling starts on Youtube and VLC after a few minutes and then the increasing noise fades out. This happens both on a usb headset and headphones port.
    iTunes 11.1.5 plays audio ok on both headset and the headphone port but has its own problems. No response from double clicking, only with a right click menu and selecting itunes the track will open. itunes is the default player.
    Edit: crackling in itunes as well afer a few minutes.
    Mavericks 10.9.2 / 2009 Mac Mini 3,1

  • Neither Wifi nor Bluetooth is working After upgrading to iOS 8 even after reset all settings including network setting.

    i to upgraded my 4s to ios8 & now both wifi as well as Bluetooth options are greyed out & so I can't use it as personnel hotspot. I have reset all settings including network setting but it doesn't work.

    Hey ahmedfromtanta,
    Thanks for the question. After reviewing your post, it sounds like trouble with Wi-Fi. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    iOS: Troubleshooting Wi-Fi networks and connections
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • Bluetooth not working after upgrading to Maverick

    Hello All!
    I upgraded my Mac Pro system (NOTE: This is NOT the Mac Pro "Book" laptop, this is the Mac Pro tower system.) to Mavericks yesterday and now my iPhone (Verizon 4 model) won't connect via Bluetooth. It asks me for the pairing code number, which I enter in and then it shows for a split second as being connected, but then goes back to being disconnected. Then it will give me errors as.... it can not connect because Network connection is not available. Or device can not be found. Even though it shows my iPhone in the Bluetooth devices preference window on my Mac Pro and also my  Mac Pro system on my iPhone Bluetooth settings device window.
    Anyone have any answers? Other than this is another Verizon scheme to block their iPhone users into paying another surgcharge or fee to now be able to connect via Bluetooth?
    Thank you!
    Kevin

    You're very welcome.
    That is very interesting, because I didn't know of anyone who upgraded to W8.0 with a Ralink wireless card with the BT 3.0 radio that got the BT to work at all.
    We tried the W7 drivers, and they didn't work.
    That is why you don't see a W8 Ralink BT driver for the bluetooth on your PC's support and driver page amongst the other 11 drivers listed.
    The Ralink 3.0 version of BT is not supported in W8.
    While somehow the BT has worked in W8 for you, I'm afraid your luck has run out.
    Unless by some fluke, HP installed a card with the BT 4.0 radio on your model...
    You can try this W8 driver for the Ralink card with the BT 4.0 radio, but don't get your hopes up.
    http://h20565.www2.hp.com/portal/site/hpsc/templat​e.PAGE/public/psi/swdDetails/?sp4ts.oid=5229457&sp​...

  • Bluetooth not working after upgrading to Vista

    Hi All,
    I called tech support and they pretty much informed me that I'm s.o.l. so I thought I'd turn here.  I'm running a T60 (model 8744).  I was running Win XP and getting blue screened to death.  So I upgraded to Vista Business.  I now have everything re-installed and working...except for Bluetooth.  Lenovo support says there aren't any Vista drivers for Bluetooth on this model.  IS THAT RIGHT?  At this point I'm pretty shocked.  I figured by now they would have completed a Vista driver pack for this laptop considering it's a couple years old now.  Anyone have any suggestions on other drivers that I can use successfully?

    It seems that the mouse has still stored the pairing information (normally it should loose it if the battery was removed).
    The mouse tries to connect to the last connection, but the other side (PC) has not the information anymore.
    Could you try to pair the mouse with any other PC or notebook before you try to pair it with your notebook again ?
    Furthermore increase the security for this test by enabling the following option:
    Right click Bluetooth system tray icon > Options > Security > Custom Level > Mode: Link level enforced security

  • Bluetooth not recognized after upgrading to 6.0 BIOS version

    Hi,
    I previously had 5.5 BIOS version on my [PSAA8] notebook and all was fine. Just right a moment ago I've updated to 6.0 version and Bluetooth doesn't work. I wonder where I could find the old 5.5 version, no search can get me so far.
    Any help appreciated.

    Hello Adam
    The whole story sounds very strange. Are you sure the BT is enabled properly?
    Are all BT components listed in device manager as before?

  • Bluetooth not available after upgrading to Mountain Lion

    Mine is a mid-2011 iMac. I tried all the ways listed in https://discussions.apple.com/message/4874277?messageID=4874277#4874277?messageI D=4874277 but with no luck.
    Anyone experienced similar issue with a solution?
    Thanks.
    Wenbin

    Yes, I'm having the exact same problem.
    1. Bluetooth not available from the menu option "Bluetooth: Not Available"
    2. Yet, my Bluetooth Apple Magic Mouse works as a basic mouse
    3. None of my gestures on magic mouse work (scrolling, swiping, etc.)
    4. My Apple Bluetooth wireless keyboard works, but the iTunes control from F7 to F12 no longer work as the pictures imply (e.g. F12 should be volume increase, but it goes to Dashboard)
    Reboot doesn't fix it. Haven't try safe mode.
    APPLE, PLEASE HELP.

  • Why did my Bluetooth stop working after upgrading to 10.8?

    Now I get "Bluetooth: Not Available" when I click on the Bluetooth icon. According to my USB Device tree, however, I have this device connected:
    Bluetooth USB Host Controller:
      Product ID:    0x8215
      Vendor ID:    0x05ac  (Apple Inc.)
      Version:     1.80
      Serial Number:    002500C1B048
      Speed:    Up to 12 Mb/sec
      Manufacturer:    Apple Inc.
      Location ID:    0x5a110000 / 5
      Current Available (mA):    500
      Current Required (mA):    0
    Plugging in an alternate Bluetooth adapter (branded ASUS, but a "Broadcom BCM2046B1" in the USB Device tree) allows me to connect to Bluetooth devices. Disconnect that, and Bluetooth goes away again.

    Now I get "Bluetooth: Not Available" when I click on the Bluetooth icon. According to my USB Device tree, however, I have this device connected:
    Bluetooth USB Host Controller:
      Product ID:    0x8215
      Vendor ID:    0x05ac  (Apple Inc.)
      Version:     1.80
      Serial Number:    002500C1B048
      Speed:    Up to 12 Mb/sec
      Manufacturer:    Apple Inc.
      Location ID:    0x5a110000 / 5
      Current Available (mA):    500
      Current Required (mA):    0
    Plugging in an alternate Bluetooth adapter (branded ASUS, but a "Broadcom BCM2046B1" in the USB Device tree) allows me to connect to Bluetooth devices. Disconnect that, and Bluetooth goes away again.

  • Bluetooth handset not working after upgrading to 2.2.1

    I failed to get my bluetooth headset working after upgrading to 2.2.1. I have tried 4 different headsets (with different brands and models)and even bought a new one (Plantronic 640MP) and no luck also. I have also tried to hard reset and restore in iTunes but no success.
    I can successfully paired my headset with iphone 3G but no sound transmitted over. I have been using my headset flawlessly before the firmware upgrade.
    Any ideas? Thanks in advance.

    Hello.
    I´m new to iPhone and this forum
    I am having the same problem with my iPhone but I don´t know if it´s related with 2.2.1. firmware since that came on the iphone right away when I bought it.
    I can connect to handfree set and pair up fine, but no sound what so ever is passed to or from the handsfree set. The handsfree set works fine with other phones.
    I tryed restore but it didn´t help.
    I restored the iphone with itunes, the function "If you are experiencing problems ...." hit the button "Restore" e.g.:
    http://www.tzywen.com/photos/iphone/itunes_restore.png
    After that it told me to "set up my iphone" and I chose "restore from the backup of" e.g.:
    http://www.mattcutts.com/images/restore-iphone.png
    The links are not from my procedure, just something I found on the internet to describe what went on
    Did anyone find a solution for this problem?
    How often do Apple make new firmware upgrades? (hoping that will help)
    Regards Martin

Maybe you are looking for

  • How to display a new view from a nib ?

    how to display a new view from a nib in the main window after clicking on a button. When I click a the button named for example "goToGokyo", the link to my procedure runs correctly because I see my NSLog message "goToGokyo button pressed". My nib, wh

  • Private constructor documented as public by javadoc

    I'm generating document for a class similar to the following: public class Example { public static final Example TYPE1 = new Example(); public static final Example TYPE2 = new Example(); private Example() { // private constructor When I run the Javad

  • Demoshield error when installing SB audio 4 cd driv

    After clicking next on the creative software setup welcome screen for installation, it gives me a microsoft error that DemoShield Player has enoucrtered a problem and needs to close. What is wrong? Please someone help! the audio card is brand new!

  • Why my gen 3 will not update to ios5

    Just bought a used Gen 3 iPod touch and thought it would be updated to ios 5 it is 32g why will it not update?

  • How do I restore banners

    I have an iPhone 5 and the bottom banner when in the iTunes Store app is missing so I can't do a search or choose a playlist etc - how do I restore it.