Bluetooth spp service problem

hi:
i�m developing j2me lbuetooth applications to exchange information between one mobile phone and other bluetooth device...i have installed a spp sever application in the mobile phone but i am not able to 'see' this service from other bluetooth devices like a pc...on emulator runs well. I think i have some problem with sdp because the sevice doesn�t publish...
thanks

I have the same issue, after a use Bluetooth, and turn it off, it will turn on later automatically.
I can only surpass it by rebooting

Similar Messages

Bluetooth rfcomm service discovery

Hi, I�m trying to use the bluetooth vi�s with Labview 7.1. I have a bluet. chip (zeevo) with its bd address but I don�t know the channel associated with the spp service. I used the rfcomm service discovery block but it says my bluet. chip has no services. The same if a put the bd address of a PDA. Running the vi (on the pc) it gives no error with the address but says there are no services, even if I use the examples I found in the example dir of labview. Where is the problem? Thank you. Eli

Hello Eli,
Having followed this and other bluetooth related threads, I've had identical problems to yourself. I'm developing bluetooth apps on a Toshiba Laptop with internal bluetooth card. This unfortunately uses Toshiba's own proprietary drivers, and after locating the Q323183 service pack, installation of this only gave me the Bluetooth monitor and did not allow LabVIEW to recognise the internal card. I've a TDK USB adaptor which comes as part of the blu2i development kit, and this has all the correct drivers bundled on the accompanying CD. I installed the Q328183 service pack and then added the BT Monitor exe separately and was immediately able to use the adaptor with LabVIEW.
I've also had success with the the D-Link DBT-120 USB adaptor w
hich can run off the same driver and monitor software. As far as the service search is concerned, I've had similar problems as yourself with these adaptors when running a service search as only the address of the adaptor is returned but no services - I think this is down to the fact that the MS drivers don't provide the adaptor with any services, although it is possible to move data between the PC and a PDA (I have an Ipaq 2210 running some LB7.1 PDA apps for this).
By installing the TDK software suite for that adaptor, I was then able to find the services with a PDA set up to search for these (using Service Search VI).
Hope this helps.
Fadenoid

Error: Unable to start the bluetooth stack service

HP Pavilion g7-2017us, Windows 7
After starting up I get the error message: UNABLE TO START THE BLUETOOTH STACK SERVICE.
First, I don't know what that means ... Second, I don't know how to remedy the problem.
Can anyone help please? ... THANKS!

Steps I would suggest are:
1. Update Bluetooth Device Driver. Steps to update the device driver:
i. Click on Start
ii. Select Control Panel
iii. Select System and maintenance
iv. Click Device Manager (If you are prompted for an administrator password or confirmation, type the password or provide confirmation.)
v. In the Device manager locate the Blue tooth device
vi. Click the Driver tab, and then select Update driver
If its still not fixed go to step 2
2. Uninstall the Bluetooth device, restart the computer and install the latest drivers.
Link for reference: Update a driver
Broadcom bluetooth Drivers for windows 7 64-bit
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-104112-1&cc=us&dlc=en&lc=en...
Intel Wireless Drivers for windows 64-bit
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-104707-1&cc=us&dlc=en&lc=en...
Regards;
Ray
I am an HP employee
Please click the White Kudos star to say thanks for helping.
Please mark Accept As Solution if my help has solved your problem.

HP touchsmart 520, error unable to start bluetooth stack service

I am wanting to use the bluetooth feature on my Touchsmart 520 for transferring pics, audio files etc. My periphal device is a Samsung Galaxy S5. My phone shows that it is paired with my pc, when i try to access via bluetooth I get the error message unable to start bluetooth stack service. My Touchsmart uses the Broadcom adapter that came with the pc. Help!!!
CapnRon1

Hello @CapnRon1,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you are having issues transferring files between your Samsung Galaxy S5 and your HP touchsmart 520 Desktop PC. I am providing you with some steps you can try below:
Step 1. Go to device manager
Step 2. Right click on "Bluetooth Peripheral Device" that you want
Step 3. Select "Update Driver Software..."
Step 4. Choose "Browse my computer for driver software"
Step 5. Choose "Let me pick from a list of device drivers on my computer"
Step 6. Select "Ports (COM & LPT)"
Step 7. Select "Microsoft" at "Manufacturer" list
Step 8. Finally select "Standard Serial over Bluetooth link"
If you are still unable to pair with a Bluetooth device try the following:
Step 1. Search for "Change device" in the Windows 8 Start menu.
Step 2. Click on where it says Change device installation settings.
Step 3. Select the No, let me choose what to do option.
Step 4. Check the automatically get the device app option
Step 5. Click Save changes to save the settings you just chose
As well you can try this:
Step 1: Go to RUN (Windows Logo + R) and type “services.msc” and Enter
Step 2: Now find “Bluetooth Support Service” and double click on it
Step 3: Now click on Log On Tab and Type in "Local Service" without quotes
Step 4. Click on “This Account”
Step 5: Now remove any passwords leave the password field blank
Step 6: Underneath the upper left title should be a hyperlink "Start" Click it
You can also check:
Power Management tab and unchecked the box that said "Allow the computer to turn off this device to save power." Problem solved. Thank you for your willingness and persistance in helping me resolve the issue.
I would be happy to assist you further is you require it, but first I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number I can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

BlueTooth USB dongle problem

Hello,
I have a problem with my BlueTooth USB dongle
OS: Win98
Drivers: latest 1.4.2.10
When I setup a connection the following error occurs:
ERROR: Unable to start the BlueTooth stack service
Can anyone tell me how to solve this problem??
Andries

No configuration or modification of system files is required. If the USB Bluetooth dongle is Mac compatible, just plug it in and open the Bluetooth system preferences pane.
Not all USB Bluetooth dongles are fully Mac compatible.

BTTray Error: Unable to start the Bluetooth Stack Service

I have a HP TouchSmart 610-1190f operating system Windows 7 64-bit
I installed Norton 360 back in January and ran the registry program which corrupted the Bluetooth.
BTTray Error: Unable to start the Bluetooth Stack Service. I know that a system restore will take care of it, but when it happened I did not know that and I also did not know that I can't go back in time like Windows XP. I've tried reinstalling the driver with no luck. Is my only option a System Recovery?

Product Name: HP H8-1160t
Product Number: QC45AV#ABA
I spent over 3 hours with HP chat and in typical fashion they could not solve the problem and requested I restore to original OS. I refused. HP Support needs to figure out a way to RESOLVE a customer problem without first jumping to "please restore your system".
After a second call to HP, they sent me a replacement Wireless Card, and much to my surprise the Hardware Tech showed up as scheduled on a SATURDAY no less; even after being told by HP that no weekend calls are made.
Anyway, the very nice service tech installed the new part and ...drum roll....wait for it...Voila!!!!
NO FIX!! As expected. Why Did HP Software Support think the new card would fix the issue?? HP Software Support is virtually USELESS, actually, lets just say without any equivocation at all: HP SOFTWARE Support is USELESS; HARDWARE SUPPORT IS FANTASTIC...
OK. I FIXED the problem myself:
I downloaded the Broadcom fix:
sp56715.exe
Available from:
ftp://ftp.hp.com/pub/softpaq/sp56501-57000/ sp56715.exe (eliminate the spaces...HP forum would not let me load this VALID site.
I am NOT POSITIVE THAT DOWNLOAD IS FOR YOUR VERSION, BE CERTAIN TO CHECK SYSTEM REQUIREMENTS.
Rebooted, Bluetooth service started up, NO BTTray Stack Error, discovered my device (old LG Cell Phone), connected, and I was able to access the MY Music, Pictures, Video files finally.
Trust me, HP Software Support is a waste of time.

Bluetooth Stack Service

What is Bluetooth Stack Service for? What does it do? Does it matter that i Can't reach it?

I have a VERY similar computer:
Product Name: HP H8-1160t
Product Number: QC45AV#ABA
I spent over 3 hours with HP chat and in typical fashion they could not solve the problem and requested I restore to original OS. I refused. HP Support needs to figure out a way to RESOLVE a customer problem without first jumping to "please restore your system".
After a second call to HP, they sent me a replacement Wireless Card, and much to my surprise the Hardware Tech showed up as scheduled on a SATURDAY no less; even after being told by HP that no weekend calls are made.
Anyway, the very nice service tech installed the new part and ...drum roll....wait for it...Voila!!!!
NO FIX!! As expected. Why Did HP Software Support think the new card would fix the issue??
HP Software Support is virtually USELESS, actually, lets just say without any equivocation at all: HP SOFTWARE Support is USELESS; HARDWARE SUPPORT IS FANTASTIC...
OK. I FIXED the problem myself:
I downloaded the Broadcom fix:
sp56715.exe
Available from:
ftp://ftp.hp.com/pub/softpaq/sp56501-57000/ sp56715.exe (eliminate the spaces...HP forum would not let me load this VALID site.
Rebooted, Bluetooth service started up, NO BTTray Stack Error, discovered my device (old LG Cell Phone), connected, and I was able to access the MY Music, Pictures, Video files finally.
Trust me, HP Software Support is a waste of time.

Can't re-add printer after removing from eprint center - 'Web Services Problem'

I have an HP Photosmart Premium C310 series printer (Model Number CN503B) which I have been using with ePrint for about 18 months. Aside from intermittent issues it has worked, I use a chromebook most of the time so rely on the ePrint option via Google Cloud Print.
Last week it stopped working, with every job in the list showing as cancelled. Following advice on the forum I removed the email address of the printer from the eprint center. I thought it would then be simple to add the printer back. However, I have been unable to connect the printer to the web service so I cannot create the code I need to add the printer back.
STEPS TO REPRODUCE:
1. Factory reset printer settings
2. Factory reset network settings
3. Restart printer and Reboot router
3. Settings -> Network -> Wireless Setup Wizard
4. Choose correct SSID, enter password for WPA
5. ‘Connected to Network’
6. Settings -> Web -> Enable Web Services
7. ‘Accept terms’ screen -> Accept
8. ‘Checking for product updates’ screen shows briefly then returns to 'accept terms' screen
9. Next it makes a ping sound and shows ‘Web Services Problem’ ‘Problem connecting to Web Services Server’, it then pings again a few seconds later (which ties in with what I see in the network logs as a second attempt)
10. Log on to printer via web interface and set IP address of printer to manual IP outside DHCP range (as advice on other threads in this forum). Check DNS setting valid (same as gateway server which all other devices on network are also using successfully as DNS)
11. Repeat steps 6 and 7 - still same error message
I consider myself technically savvy and have followed all advice I can find on this forum including the following:
1. reverting to printer and network defaults
2. rebooting router
3. assigning static IP address to printer outside of DHCP range of router
4. connecting to printer via web interface and setting DNS to variously: same as gateway, google DNS (8.8.8.8), ISP DNS
5. adjusting firewall settings on router to explicitly allow and log outbound connection on the HP ports (already had a rule allowing all outbound connections)
As mentioned, the printer worked fine with ePrint previously so I suspect the ePrint server is rejecting a request from my printer for some reason, maybe because there is old / corrupt data on the server regarding my specific printer.
I’m logging outbound traffic from the printer and here are what the router logs show me (printer IP replaced with 192.168.x.x below, even though it is not public )
Thu, 2013-04-11 09:13:42 - TCP Packet - Source:192.168.x.x, 36475 Destination:15.201.202.81,80 - [HTTP rule match]
Thu, 2013-04-11 09:13:43 - TCP Packet - Source:192.168.x.x, 51463 Destination:15.201.224.79,443 - [HTTPS rule match]
Thu, 2013-04-11 09:13:44 - TCP Packet - Source:192.168.x.x, 53044 Destination:15.201.224.79,443 - [HTTPS rule match]
Thu, 2013-04-11 09:13:44 - TCP Packet - Source:192.168.x.x, 51463 Destination:15.201.224.79,443 - [HTTPS rule match]
Thu, 2013-04-11 09:13:44 - TCP Packet - Source:192.168.x.x, 53044 Destination:15.201.224.79,443 - [HTTPS rule match]
Thu, 2013-04-11 09:13:51 - TCP Packet - Source:192.168.x.x, 64270 Destination:15.201.224.79,443 - [HTTPS rule match]
Looks like both are HP sites: first is 'g4t2674.houston.hp.com' and the second secure one is ‘registration-pro-site2eprint.houston.hp.com’ which sound likely to be correct. That suggests the DNS is working but that the registration server doesn’t like the request for some reason.
I had the printer registered for Google Cloud Print but I have now deleted that also and it doesn’t seem to have made any difference (assume it just formats and forwards to the HP ePrint email anyway).
One hack that sheds some further light is to switch off wifi on the printer and then switch on ePrint. Eprint gives an error but stays set as 'on'. When I then switch wifi back on I can then at least check for product updates (it tells me I have the latest product updates). However, web services are still a 'no go'. Network traffic for that product update exchange looks like this:
Thu, 2013-04-11 10:14:51 - TCP Packet - Source:192.168.x.x,63960 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,63938 Destination:15.240.238.56,80 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,63960 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,39054 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,63938 Destination:15.240.238.56,80 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,39054 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x,63960 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x,63938 Destination:15.240.238.56,80 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x,39054 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x,63938 Destination:15.240.238.56,80 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x ,39054 Destination:2.16.226.12,443 - [Any(ALL) rule match]
So clearly the printer can communicate to those servers well enough to find it has the latest firmware.
I realise this is a lot of information but hopefully some of it is helpful for troubleshooting.
Thank you in advance for any help!

The issue disappeared this weekend. I didn't change anything so it must have been something server side. I notice others with the same issue have also seen it resolved.
Thanks to all those who contributed and tried to help out. Although disappointed I went for a long time without ePrint I'm glad that action was apparently taken to resolve in the end.

File Proxy Service Problem on errors

In continuation of this thread...
File Proxy Service Problem on errors
We are now facing two problems.
1.The proxy service is executed twice
2.File is getting moved to error directory with prefixed file names which we are not able to retrieve and use in the notification email.
Not sure how to fix :(

1.The proxy service is executed twice Check if this is due to transaction timeout issue as discussed here. Re: OSB File polling working twice with the same file
2.File is getting moved to error directory with prefixed file names which we are not able to retrieve and use in the notification email.I am not sure wehther you have any option here. You can check with support. Alternatively can raise notification mail with the timestamp and some file/business identifier from the file. The support person can then open the file from error directory to verify the file/business id in the file or educate the support user that the files will have a prefix

Customer Service Problems

After fighting with Verizon customer service over two service issues without any possibility of resolution I am canceling my account.
I’m doing this reluctantly because as a long-term shareholder of Verizon I would like to see the company succeed and keep profitable. Yet I am appalled by the cavalier, disrespectful, obstructionist treatment from your staff in dealing with customer service problems. When you were just the telephone company and operated as a monopoly in a regulated industry, you had to take customer issues seriously.   Now that you are an unregulated telecommunications giant it seems that you don’t feel the need to respond to your customers. Someone in your company needs to hear this and put a stop to these destructive business practices.
In brief, the first issue involved arranging a service call for interruption of internet service. The entire process kept me on the phone for a total of 3 hours over several days. I have given up my land line and use a cell phone exclusively. Verizon’s communication systems and staffing levels caused me to wait on hold for 10-15 for each person that I spoke to. Then each conversation averaged 10 minutes.   In addition, I was transferred to different departments but I did not understand the reason for the transfers. Then the pattern of hold-talk-transfer began again. Several times my calls were dropped necessitating more repeats of the hold-talk-transfer pattern. Some of your staff were South Asian and they either garbled or misunderstood English, thus prolonging the conversation beyond the average of 10 minutes.   During that time I incurred cell phone charges of $.45/ minute.
After the service was restored I called Verizon customer service and asked for a service credit to compensate me for those out-of-pocket expenses over and above 30 minutes which I consider to be a reasonable amount of time to arrange a service call. They denied any responsibility for the amount of time it took to arrange the service call or the amount of time to complain about their service. I was not happy with the outcome so I requested to speak with someone who was a decision maker and had authority to negotiate a settlement. I also asked to have them communicate with me through email. I was told that communicating through email was not possible. These calls followed the same pattern of hold-talk-transfer averaging 30 minutes each. I repeated myself to 3 or 4 people who wrote down my complaint before I got to a manager who had decision making authority. The manager denied any responsibility for the amount of time it took to arrange the service call and would not authorize a service credit.
The second issue involved billing. I signed up for auto-pay to have my monthly bill deducted directly from my bank account. Verizon’s computer system deducted the bill twice, overdrawing my account. I incurred a bank overcharge fee. The same pattern of hold-talk-transfer began for this complaint as well. The customer service staff refused to take responsibility for this error as well. Their solution required me to spend more time and incur extra expenses. I had to repeat myself to 3 or 4 complaint takers before I reached the same manager who denied my first request. He denied any responsibility for this billing problem too.   I had to have my bank retrieve the money under a fraud compliant.
Verizon is one of the largest *communications* corporations in the world.  If your internal systems can't handle customer service calls in a reasonable amount of time, then there is a problem. If your customer service staff is unwilling to take responsibility for such inadequacies and solve the issues that emerge from them, then there is a problem. If a customer has to contact the CEO of the company to try to resolve two service related issues, then there is a problem. When all of those actions prove inadequate, then there is a *communications* problem.
Customer service has flagged my account and put me down as a “problem” customer. Instead of offering even a token settlement, they are prepared to stonewall me by maintaining that the company is just not at fault and that they tried to solve the problems but I wouldn’t cooperate or accept their solutions. Early on in the process, if someone told me that Verizon messed up just a little, but still couldn’t compensate me, I would have accepted that, albeit reluctantly, and dropped the matter.
This is not the way I do business and I resent it when others don’t feel the need to honor any kind of code. I grew up working in my family’s retail liquor store. From the time I was a kid I learned four customer service lessons that I’ve carried over into my adult life:
Admit when you are wrong and try to make up for the mistake.
Never argue with a customer over small things.
Listen to the compliant and don’t just dismiss it out-of-hand
Try to make things right even though you may not be directly responsible for problem.
For my two problems, Verizon customer service staff didn’t even come close to following these common sense rules. I’ve learned that if you ask their customer service people they will repeat back to you some type of business code that they say they operate under. But their behavior tells a different story.
Unfortunately when I spoke with {edited for privacy} of the Executive Presidential Appeals office, I was taken somewhat aback by his manner and demeanor, which was coarse and inappropriate for a customer service discussion, and which I found personally offensive. He and members of his staff agreed to send me emails specifying which part of the Terms of Service they based their decisions on. To date I have not received the communications they promised.
Is this the image of your company that you want the public to see? Are you willing to just shrug off these complaints as an isolated case that is too small to concern yourself about? I’m afraid the answer will be yes. Not only do you feel that you are too big to fail, but you are too big to care.   Customer service means solving problems not manufacturing bad will and resentment.
My purpose in writing this note has been twofold: to make one last effort to solve my problem and to hope that someone will take note about the issues about customer service practices that are harmful to the company. I'd be happy to speak with someone with real authority to deal
with my issues but have no interest in repeating my past experiences.
It's too bad that this had to happen since the solution could have been so easy and simple.
I plan to publish some form of this letter and distribute it to the public.
Solved!
Go to Solution.

Therefore, I request to please clear this unacceptable due balance, and contact Experian to removed and clarified the mistake in my credit report.
RE:  Cancellation fee charged on internet DSL service charged by mistake. {edited for privacy}
A $65 balance remain for a cancellation fee on internet DSL service, by Verizon New York mistake.
In February of 2010, I set up my phone and TV in a vacation plan but keep my internet service active. After a month I had a vacation plan, suddenly without notification, my internet service was suspended and a cancellation fee was issued.
My final statement was $ 24.47. I cleared a check from Verizon.
I contacted Verizon online to request connect my internet service and discuss the issue on the cancellation fee. The response was that I should pay the internet cancellation fee, and paid a new activation.
After fighting with Verizon customer service over the unacceptable fee charge service issue without any possibility of resolution I cancel my home phone which was in a vacation plan.
Later I kept receiving the statement with this cancellation fee every month. I called and discussed the issue more than 6 times during the next 6 months, The entire process kept me on the phone for a total of 2 hours over several months. The costumer representatives responded that the issue was in an investigation.
Later,  a Collector company start chasing me to get the $65 paid. Phone number: {edited for privacy}, Inclusive, they made an offer to reduce the amount if I accept to pay or contact Verizon to request a clarification.
By the end of the year, I contacted Verizon costumer services one more time but the representative stated that the account is not visible anymore.
Convinced that the problem on this account was resolved, the second week of November, I called Verizon to reestablish my account with a new home phone number and Internet DSL connection.
The answer was that  following Verizon policy I was unable to get a new account if a balance remain.
After I explained the events, a manager (non-identified) who spoke to me by phone told me that Verizon will investigate the issue and I should wait for approval.
On November 16, my account was confirmed approved and clear of debt, therefore, Verizon welcome me back with Home phone and internet DSL Service and confirmation on my online registration.
New number:{edited for privacy} ; Email:{edited for privacy}
Also, during the months of January and February 2010, Verizon New York, made other charges mistakes in my account (See details below) that have been resolved with an apologize and a refund.
Events that prove the lack of training and support Verizon customer and billing service have.
Chronology of the emails exchanged between Verizon Ecenter and myself after I requested investigation with the charges.
01/10/10   I have contacted Verizon customer support regarding of a mistake in my internet service statement.Tracking # 430824. Reference: Duplicate charges for Internet Security suites service.
1/12/10 Verizon eCenter responded. Angela. ' Apologized for the inconvenience. 'The cancellation and credit will appear on the next bill'.
2/08/10 Verizon eCenter responded. Cheniqua. 'I have issued a credit of $6.52 for a Verizon internet security suite charges'; your internet charges
2/04/10 I have contacted Verizon customer support in regard of clarification in my Direct TV  statement.
Tracking # {edited for privacy}. Reference: Balance from Direct TV due to my recently requesting vacation plan.
2/06/10 Verizon eCenter responded (John) Verizon Bill statement: February 26 = $6,73 paid
2/06/10 I have contacted Verizon customer support in regard of a mistake in my home phone statement.
Reference: By mistake, international fee in my home phone (inactive line/vacation plan) was charged.
Tracking # {edited for privacy}
2/08/10 Verizon eCenter responded. (Linnette) 'I apologize for the error'.
A credit for the international plan has been applied to your account and will appear on the next statement.'
2/08/10 Verizon eCenter responded (Cheniqua) 'The regional essential calling plan does not qualify for a discount during vacation suspension. Which prove that my home phone was in a vacation plan.
2/15/10 I have contacted Verizon customer support in regard of a non-notified, neither requested suddenly suspension on my internet DSL service and charged a cancellation fee for this suspension.
Tracking # {edited for privacy}
2/16/10 Verizon eCenter responded (Michael) I am sorry for the inconvenience you have experienced.
Please contact our Consumer Sales and Solutions Center directly at 1-800-Verizon or (800) 837-4966
Monday through Friday between 8:00 AM to 6:00 PM Local Time.
2/16/10 Verizon eCenter (Sue) responded : I am sorry for the inconvenience you have experienced.
I understand your frustration and concern regarding canceling your internet service in error. In order to provide you with the best customer service, please contact our Consumer DSL Sales and Solutions department directly at (800) 567-6789 and a representative will be happy to assist you.
I stand on my decision of not pay for someone else mistakes.
Your actions have damaged my integrity as a good costumer and citizenship.
Without doubt after this problem get clearly resolved, you will lose this good costumer, get a negative feedback and I am planning to publish this letter at every web forum available.

Urgent web service problem. can not find url of WSDL

Hi all,
I met a web service problem recently.
1 I have set up a web service and reside it on Java System Application server9.0. But there's a bug of this web server, which will stop after the user log off the server. I have installed the Application server as a windows service. It suppose to run all the time. I don't know why the server stop after I log off.
2 For that reason, I tried to migrant my web service from the java application server to Tomcat5.5. I deployed my web service to folder webApps. But I don't know the WSDL url of the web service, which is the web reference for my frent-end c#.net application.
Anybody can give me some idea?
Many thanks

Nobody knows?
Please help me

No Service Problem in iPhone After iOS 8

no service problem in iphone 4s after upgradeing to ios 8
tried all the tips which are given in iphone support and he sim card many times bt still face same problem

Have you tried these?
http://www.iphonetopics.com/ipad-2-ios-8-no-service-bug/

TS4429 9 months 6 replacements and still the no service problem. Only a restart will bring the service back.I have tried all the suggestion to fix this but it is still happening. Please Help

I have had 6 replacement Iphone 4s and still my issue has not been resolved. What more must I do to have a telephone that can receive phone calls without me having to check it every 20 mins to make sure I have network service. Renewing the simcard has also not worked.

I was thinking that Kabel Deutschland might be the problem but my wife has a Iphone 3GS on the same network and she never has the no service problem. Also when I said I have had 6 replacements yes they all had at one time or another this issue with no service but they had other issues like not switching off or bright spots on the screen etc etc. Also the sim card has been replaced twice

Unable to start Bluetooth stack service

I'm getting the message "Unable to start Bluetooth stack service" and cannot connect any new bluetooth devices. My notebook is a Pavilion tx 2000. Any ideas??

Hi,
Reinstall drivers for bluetooth module.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

I get this message when i start the computer :" error : unable to start the bluetooth stack service"

i get this message when i start the computer :" error : unable to start the bluetooth stack service"

If a power cycle of the TC works then the issue is simply Lion.. and there is as yet no fix.. and may never be..
Apple do not seem to acknowledge the issue but plenty of people have it.. It doesn't happen with SL.. one very good reason to not bother with Lion.. Maybe ML will fix it.. without Apple having to ever admit an issue.
In the meantime, if possible downgrade TC to 7.5.2 .. it has less issues than 7.6 or later.
Reset the TC and change all names, TC and wireless names, to short, no spaces, no special characters.
If it is the main router, set the dhcp lease to a short time.. 10min I recommend.
The above will probably not fix the issue.. but it might go a bit longer before a reboot is needed.. going back to SL would fix it.

Bluetooth spp service problem

Similar Messages

Maybe you are looking for