Bluetooth Stack installation fails
I bought a Bluetooth dongle with the Toshiba Bluetooth Stack. Software installation proceeds normally until the point where it says "Insert the Bluetooth device and click Enter." I do that and the installation stops. I have waited up to half an hour but it never gets past 56%.
I am running Windows 2000 SP4 on an Athlon 1GHz. Plenty of disk space and RAM. Tried the install several times, even tried shutting down the firewall. Nothing makes any difference.
Any suggestions?
Yes, the Vid_0c10&Pid0000 is correct for your device. It is a "Silicon Wave Bluetooth Wireless Adapter".
That it is listed also in the "Exclude from select" in the [ControlFlags] section is also correct.
The message of XP that it is working correctly is a sign that the MS-stack has caught the drivers.
- Open the device manager (Start->Run -> Devmgmt.msc)
- Right-mouse-Click on the second device under "Bluetooth Radios".
The name should be "...Bluetooth ..."
(or an "Unknown device" or Bluetooth device under the Others section).
(- If SP2 is installed then please check also
"Properties -> Details -> Device Instance Id" of it. It should display
"USB\VID_0c10 ..0000...".)
- Select "Properties -> Driver -> Update Driver... -> No, not this time ->
Install from a list or specific location -> Don't search. I will choose
the driver to install. -> Select the not signed driver (driver for your device) ->
Continue Anyway -> No, not this time -> Install the software automatically -> No,
not this time -> Install the software automatically ...
- Now you should find in the Device Manager under "Universal Serial Bus controllers"
a "...Bluetooth ..." device after the installation was finished.
Similar Messages
-
Broadcom bluetooth drives installation failed, no bluetooth device was detected.
hello, i have HP Pavilion dm4-3013cl Entertainment Notebook PC laptop.and i am trying to install BROADCOM BLUETOOTH DRIVERS in my laptop and i am getting this error that no bluetooth device was detected. please make sure that your bluetooth device is plugged in properly in order to countinue installation. now i want to say that i lost my recovery disc and after while for heating issue my main hard disk break or not working condition so i just replace hard disk and ofcourse i dont have os so i install fress windows 7 ultimate 64bit in my laptop. and install each drivers provide by HP website i downloaded all drives and installed and my windows 7 is also up to date. i search for this issue allmost one week for solution but cabt fix and i come to know that before insalltion of BROADCOM BLUETOOTH DRIVERS i have to enable bluetooth in HP WIRELESS ASSISTANCE but in my case i think i cant find due to new disk and new os. i can send file or recieve with bluetooth can paired with my all smartphones too but cant listen music in head phones. cant access LISTEN TO MUSIC, i know the reason is only this drivers is not installing properlly and i want to fix it. now i a tired and i dont have time to search and fix it so please help me out from this issue please and sorry for my poor grammer.
fixed !!! now i come to know, the problem is drives which i update it from intel websites, paul you suggest me correct driver for my bluetooth but it is allready in my laptop which i updated before but again i download and install and nothing happen then i reformate laptop and again install all drivers which i downloaded from hp website for my laptop and again update all drivers manually and automaticallu both from intel website and intel utility drivers software and update windows too and i got same problem. cant hear music from bluettoth head phone, so again i reformate laptop but this time i just installed drivers which listed from hp website, i didnt update anything and as you said i didnt install broadcom bluetooth drivers because it is not for my laptop so then i connect my blutooth and try to access listen to music and o m g. it works now i can hear nusic form bluetooth, i dont believe this. but yes it works this forum help other also so thanks paul and have a nice day now i newer going to update my drivers... in pic you can understand that i am not using latest version of bluetooth drivers.
-
Re: Error with Bluetooth Stack driver on Protege Z830
Error during installation of Bluetooth Stack for Windows 7 (15/05/12 version) : first driver "Bluetooth USB controller-10" installed correctly but second one "Bluetooth RFBUS" fails.
Consequently Bluetooth does not work. PC says it is not activated (with Fn+F8 or running Bluetooth paramater)
Nota : the Atheros driver is up to date. I have tried with and without the Bluetooth Driver Filter Package 1.0.9.
What should I do ?
Thanks !
PS : Protege Z830 PT224E with windows 7 64 bitsOh, c'mon, folks, don't be so skeptical when someone reports a problem. What does it matter the reasons we can have reinstalling the bluetooth stack?
The fact is that THERE IS an issue with it. I'm also experiencing this problem the last OFFICIAL update. And I'm using only software provided by the Toshiba drivers download webpage, therefore it SHOULD work, as approved by Toshiba. (Model z830-10F, shipping the Atheros hardware)
When installing the new stack, the Bluetooth RFBUS (driver 8.0.2005.0) shows the typical yellow icon, and the device status reports "this device cannot start (code 10)". You all know how very useful are codes in Windows, don't you? :D
If I try to install any other driver for the RFBUS (from Atheros website for example) it fails saying I have already the latest driver. I've tried installing the Toshiba provided bluetooth stack with and without bluetooth activated in the BIOS, and it makes no difference: the install process gets stuck at some point, and it goes no further, no matter how much I wait.
Then of course I have to kill the process, after which, obviously the install doesn't work properly. Some suggestions about this?
A piece of information which might be interesting: when installing the stack, if I watch closely the device manager, there is a moment when the RFBUS appears and shows up with no problem, but then a moment later in the install process it shows the yellow icon.
Please, no replies like: "reinstall Windows from recovery partition", or "use previous bluetooth stack version". We're too grown up for that, aren't we? ;) Unless, of course, someone can tell me how or where to get the previous stack.
Thanks. -
After the update to Android 5.0.1 on my Galaxy Note 4, my Galaxy Gear S will not install apps, I get an error message that says "Installation Failed. Try Later. (WO:WO:-1002). I am glad it was a free app I was trying to install (I tried a couple of different ones to see if it was just a bad app and they all failed on the install. The Note 4 and the Gear S seem to be communicating okay via bluetooth (health stuff syncs, Gear S controls the music player on the note 4 Etc. )
Everything that I had installed previously on the gear S still works.
Everthing while in the gear manager seems to be working okay also. I can make changes in the Gear manager on the note 4 and they show up on the gear S. I have an app called watch styler , it let me create a new watch on the Note 4 and that showed up on the Gear S.
The only thing that seems to be not working is installing new apps.
When trying to get a new app it looks like it is working as normal , the dowload shows it is working but it errors out when it goes to install it.
REPLY SEPARATOR *********** -
Windows 7 64bits Installing Internet Explorer 11 ERROR Neutral package installation failed
Hi,
The laptop is running Windows 7 64bits with Internet Explorer 10 and the Windows automatic updates is turned on. The problem happens when the Windows keeps installing the Internet Explorer 11 every time between shutdown process. So I decided to download
IE11 offline installation and try to install from it but the problem doesn't solve, the installation still does not complete. I have tried to delete all files in the Windows temp folder and IE temp folder already but the problem still exist.
Below is the details from IE11_main.log file
00:00.000:
====================================================================
00:00.000: Started: 2014/05/26 (Y/M/D) 11:00:44.473 (local)
00:00.000: Time Format in this log: MM:ss.mmm (minutes:seconds.milliseconds)
00:00.016: Command line: "C:\Users\TBG\Desktop\IE11-Windows6.1-x64-en-us.exe"
00:00.016: INFO: Setup installer for Internet Explorer: 11.0.9600.16428
00:00.016: INFO: Previous version of Internet Explorer: 10.0.9200.16866
00:00.016: INFO: Checking if iexplore.exe's current version is between 11.0.9600.0...
00:00.016: INFO: ...and 11.1.0.0...
00:00.016: INFO: Maximum version on which to run IEAK branding is: 11.1.0.0...
00:00.016: INFO: iexplore.exe version check success. Install can proceed.
00:00.016: INFO: Operating System: Windows Workstation: 6.1.7601 (Service Pack 1)
00:00.016: INFO: Trying to extract ID: SetupDownloadList.txt (0) as "SetupDownloadList.txt"
00:00.016: INFO: Trying to extract ID: HardwareBlockingList.xml (0) as "HardwareBlockingList.xml"
00:00.016: INFO: Trying to extract ID: 7006 (0) as "IE11-neutral.Extracted.cab"
00:00.702: INFO: Trying to extract ID: 5501 (1033) as "Spelling_en.msu"
00:00.702: INFO: Extracted Spelling dictionary for en to C:\Windows\TEMP\IE18CE4.tmp\Spelling_en.msu.
00:00.702: INFO: Trying to extract ID: 5502 (1033) as "Hyphenation_en.msu"
00:00.702: INFO: Extracted Hyphenation dictionary for en to
C:\Windows\TEMP\IE18CE4.tmp\Hyphenation_en.msu.
00:00.718: INFO: Trying to extract ID: 7128 (1033) as "IE11-support.cab"
00:01.607: INFO: PauseOrResumeAUThread: Successfully paused Automatic Updates.
00:02.714: INFO: Updated Download list, Hardware Blocking list, and no reboot policy files successfully downloaded
and extracted for use.
00:02.730: INFO: Launched program to check hardware: "C:\Windows\TEMP\IE18CE4.tmp\IE11-
SUPPORT\IEXPLORE.EXE" /CheckHardware "C:\Windows\TEMP\IE18CE4.tmp\IE11-support\HardwareBlockingList.xml"
00:02.870: INFO: Graphics Device Information: Intel(R) HD Graphics Family
00:02.870: INFO: Hardware support check succeeded. Installation will continue.
00:02.870: INFO: Windows 7 operating system detected.
00:02.886: INFO: Service pack major: 1
00:02.886: INFO: Service pack minor: 0
00:02.886: INFO: Service pack name: Service Pack 1
00:02.886: INFO: Version Check for (KB2834140) of C:\Windows\System32\d3d11.dll: 6.2.9200.16570 >=
6.2.9200.16570 (True)
00:02.886: INFO: Version Check for (KB2670838) of C:\Windows\System32\api-ms-win-downlevel-user32-l1-1-0.dll:
6.2.9200.16492 >= 6.2.9200.16426 (True)
00:02.886: INFO: Version Check for (KB2639308) of C:\Windows\System32\Ntoskrnl.exe: 6.1.7601.18409 >=
6.1.7601.17727 (True)
00:02.902: INFO: Version Check for (KB2533623) of C:\Windows\System32\api-ms-win-security-base-l1-1-0.dll:
6.1.7601.18229 >= 6.1.7601.17617 (True)
00:02.902: INFO: Version Check for (KB2731771) of C:\Windows\System32\conhost.exe: 6.1.7601.18229 >=
6.1.7601.17888 (True)
00:02.902: INFO: Checking for correct version of C:\Windows\Fonts\segoeui.ttf.
00:02.902: INFO: Version Check for (KB2786081) of C:\Windows\System32\taskhost.exe: 6.1.7601.18010 >=
6.1.7601.18010 (True)
00:02.902: INFO: Version Check for (KB2888049) of C:\Windows\System32\drivers\tcpip.sys: 6.1.7601.18254 >=
6.1.7601.18254 (True)
00:02.917: INFO: Version Check for (KB2882822) of C:\Windows\System32\tdh.dll: 6.1.7601.18247 >=
6.1.7601.18247 (True)
00:07.597: INFO: Waiting for 0 prerequisite downloads.
01:37.423: INFO: The neutral pack was successfully downloaded from the internet. Installation will continue using
the downloaded package.
01:37.423: INFO: Waiting for 0 language pack downloads.
01:37.423: INFO: Language pack downloads completed. (exit code = 0xffffffff (4294967295)).
01:37.438: INFO: No reboot logic message NrApiStart(0), lParam=0x03771068 returned 0x00000000.
01:38.000: INFO: No reboot logic message NrApiScan(1), lParam=0x00000001 returned 0x00000000.
01:38.000: INFO: No reboot logic message NrApiStartInstall(4), lParam=0x00000001 returned 0x00000014.
01:38.000: INFO: Installing with the downloaded package. C:\Windows\TEMP\IE18CE4.tmp\IE11-
neutral.Downloaded.cab
01:38.000: INFO: Launched package installation: C:\Windows\SysNative\dism.exe /online /add-package
/packagepath:C:\Windows\TEMP\IE18CE4.tmp\IE11-neutral.Downloaded.cab /quiet /norestart
02:20.619: INFO: Process exit code 0x80004005 (-2147467259) [Unspecified error ]
02:20.713: ERROR: Neutral package installation failed (exit code = 0x80004005 (2147500037)).
02:20.729: INFO: No reboot logic message NrApiInstallDone(7), lParam=0x00009c59 returned 0x00000000.
02:20.744: INFO: No reboot logic message NrApiStartFinish(11), lParam=0x00000000 returned 0x00000000.
02:20.775: INFO: No reboot logic message NrApiFinish(12), lParam=0x00000000 returned 0x00000016.
02:20.869: INFO: Waiting for Active Setup to complete.
02:20.963: INFO: PauseOrResumeAUThread: Successfully resumed Automatic Updates.
02:32.694: INFO: Setup exit code: 0x00009C59 (40025) - The neutral cab failed to install.
02:32.741: INFO: Scheduling upload to IE SQM server: http://sqm.microsoft.com/sqm/ie/sqmserver.dll
02:32.756: INFO: SQM Upload returned 403
02:36.453: INFO: Cleaning up temporary files in: C:\Windows\TEMP\IE18CE4.tmp
02:36.531: INFO: Unable to remove directory C:\Windows\TEMP\IE18CE4.tmp, marking for deletion on reboot.
02:36.531: INFO: Released Internet Explorer Installer Mutex
Taweesak ArchawamaitreekoolDISM.log would make this clearer. And using ProcMon I suspect would really make it snap out at you. <eg>
C.f. (credit for a recent discovery)
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/i-get-error-9c59-when-updating-internet-explorer/03d4473a-867b-44a5-9a37-913e9a5879cf?page=8&msgId=afe85da0-36e0-4160-860b-d2973e78c8b9
Unfortunately, since then others have quickly stuck a pin in this balloon, finding that it is just one more bump in the road, but at least working around this coding error should change your symptom.
Good luck
Robert Aldwinckle
Thank you very much.
I have tried to create a symbolic link as suggested on a forum but the problem still cannot be solved. The error message from IE11_main.log file is exactly the same as before.
For DISM.Log, here are the details from the started time of the installtion process
2014-05-29 16:53:55, Info DISM DISM.EXE: <----- Starting Dism.exe session ----->
2014-05-29 16:53:55, Info DISM DISM.EXE:
2014-05-29 16:53:55, Info DISM DISM.EXE: Host machine information: OS Version=6.1.7601, Running architecture=amd64, Number of processors=4
2014-05-29 16:53:55, Info DISM DISM.EXE: Executing command line: C:\Windows\SysNative\dism.exe /online /add-package /packagepath:C:\Windows\TEMP\IE1CA88.tmp\IE11-neutral.Downloaded.cab
/quiet /norestart
2014-05-29 16:53:55, Info DISM DISM Provider Store: PID=9144 Getting Provider FolderManager - CDISMProviderStore::GetProvider
2014-05-29 16:53:55, Info DISM DISM Provider Store: PID=9144 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:55, Info DISM DISM Provider Store: PID=9144 Loading Provider from location C:\Windows\System32\Dism\FolderProvider.dll - CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:55, Info DISM DISM Provider Store: PID=9144 Connecting to the provider located at C:\Windows\System32\Dism\FolderProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:55, Info DISM DISM Provider Store: PID=9144 Getting Provider FolderManager - CDISMProviderStore::GetProvider
2014-05-29 16:53:55, Info DISM DISM Provider Store: PID=9144 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info DISM DISM Manager: PID=9144 Successfully loaded the ImageSession at "C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583"
- CDISMManager::LoadImageSession
2014-05-29 16:53:58, Info DISM DISM Image Session: PID=8324 Instantiating the Provider Store. - CDISMImageSession::get_ProviderStore
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Initializing a provider store for the IMAGE session type. - CDISMProviderStore::Final_OnConnect
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\OSProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\OSProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:58, Info DISM DISM OS Provider: PID=8324 Defaulting SystemPath to C:\ - CDISMOSServiceManager::Final_OnConnect
2014-05-29 16:53:58, Info DISM DISM OS Provider: PID=8324 Defaulting Windows folder to C:\Windows - CDISMOSServiceManager::Final_OnConnect
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Attempting to initialize the logger from the Image Session. - CDISMProviderStore::Final_OnConnect
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\LogProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\LogProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Getting Provider OSServices - CDISMProviderStore::GetProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\PEProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Warning DISM DISM Provider Store: PID=8324 Failed to Load the provider: C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\PEProvider.dll.
- CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Failed to get and initialize the PE Provider. Continuing by assuming that it
is not a WinPE image. - CDISMProviderStore::Final_OnConnect
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info DISM DISM Manager: PID=9144 Image session successfully loaded from the temporary location: C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583
- CDISMManager::CreateImageSession
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Getting Provider OSServices - CDISMProviderStore::GetProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info CSI 00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_OBJECT_PATH_NOT_FOUND
2014-05-29 16:53:58, Info CSI 00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_SUCCESS
2014-05-29 16:53:58, Info DISM DISM.EXE: Target image information: OS Version=6.1.7601.17592, Image architecture=amd64
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Getting the collection of providers from an image provider store type. - CDISMProviderStore::GetProviderCollection
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\CbsProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\CbsProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:58, Info CSI 00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_OBJECT_PATH_NOT_FOUND
2014-05-29 16:53:58, Info CSI 00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_SUCCESS
2014-05-29 16:53:59, Info DISM DISM Package Manager: PID=8324 Finished initializing the CbsConUI Handler. - CCbsConUIHandler::Initialize
2014-05-29 16:53:59, Info CSI 00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_OBJECT_PATH_NOT_FOUND
2014-05-29 16:53:59, Info CSI 00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_SUCCESS
2014-05-29 16:53:59, Info DISM DISM Package Manager: PID=8324 CBS is being initialized for online use. More information about CBS actions can be
located at: %windir%\logs\cbs\cbs.log - CDISMPackageManager::Initialize
2014-05-29 16:53:59, Info DISM DISM Package Manager: PID=8324 Loaded servicing stack for online use only. - CDISMPackageManager::RefreshInstanceAndLock
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\MsiProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\MsiProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\IntlProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\IntlProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\DmiProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\DmiProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info CSI 00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_OBJECT_PATH_NOT_FOUND
2014-05-29 16:53:59, Info CSI 00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_SUCCESS
2014-05-29 16:53:59, Info DISM DISM OS Provider: PID=8324 Successfully loaded the hive. - CDISMOSServiceManager::DetermineBootDrive
2014-05-29 16:53:59, Info DISM DISM Driver Manager: PID=8324 Further logs for driver related operations can be found in the target operating system
at %WINDIR%\inf\setupapi.offline.log - CDriverManager::Initialize
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\UnattendProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\UnattendProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\SmiProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\SmiProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\TransmogProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\TransmogProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Getting Provider DISM Package Manager - CDISMProviderStore::GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Getting Provider DISM Unattend Manager - CDISMProviderStore::GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
2014-05-29 16:53:59, Info DISM DISM.EXE: Attempting to add the commands from provider: DISM Package Manager
2014-05-29 16:53:59, Info DISM DISM.EXE: Succesfully registered commands for the provider: DISM Package Manager.
2014-05-29 16:53:59, Info DISM DISM.EXE: Attempting to add the commands from provider: OSServices
2014-05-29 16:53:59, Info DISM DISM.EXE: Attempting to add the commands from provider: MsiManager
2014-05-29 16:53:59, Info DISM DISM.EXE: Succesfully registered commands for the provider: MsiManager.
2014-05-29 16:53:59, Info DISM DISM.EXE: Attempting to add the commands from provider: IntlManager
2014-05-29 16:53:59, Info DISM DISM.EXE: Succesfully registered commands for the provider: IntlManager.
2014-05-29 16:53:59, Info DISM DISM.EXE: Attempting to add the commands from provider: DriverManager
2014-05-29 16:53:59, Info DISM DISM.EXE: Succesfully registered commands for the provider: DriverManager.
2014-05-29 16:53:59, Info DISM DISM.EXE: Attempting to add the commands from provider: DISM Unattend Manager
2014-05-29 16:53:59, Info DISM DISM.EXE: Succesfully registered commands for the provider: DISM Unattend Manager.
2014-05-29 16:53:59, Info DISM DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
2014-05-29 16:53:59, Info DISM DISM.EXE: Attempting to add the commands from provider: SmiManager
2014-05-29 16:53:59, Info DISM DISM.EXE: Attempting to add the commands from provider: Edition Manager
2014-05-29 16:53:59, Info DISM DISM Transmog Provider: PID=8324 Current image session is [ONLINE] - CTransmogManager::GetMode
2014-05-29 16:53:59, Info DISM DISM.EXE: Succesfully registered commands for the provider: Edition Manager.
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Getting Provider DISM Package Manager - CDISMProviderStore::GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Package Manager: PID=8324 Processing the top level command token(add-package). - CPackageManagerCLIHandler::Private_ValidateCmdLine
2014-05-29 16:53:59, Info DISM DISM Package Manager: PID=8324 Attempting to route to appropriate command handler. - CPackageManagerCLIHandler::ExecuteCmdLine
2014-05-29 16:53:59, Info DISM DISM Package Manager: PID=8324 Routing the command... - CPackageManagerCLIHandler::ExecuteCmdLine
2014-05-29 16:53:59, Info DISM DISM Package Manager: PID=8324 Encountered the option "packagepath" with value "C:\Windows\TEMP\IE1CA88.tmp\IE11-neutral.Downloaded.cab"
- CPackageManagerCLIHandler::Private_GetPackagesFromCommandLine
2014-05-29 16:53:59, Info DISM DISM Package Manager: PID=8324 Package Microsoft-Windows-InternetExplorer-Package-TopLevel~31bf3856ad364e35~amd64~~11.2.9600.16428
with CBS state 4(CbsInstallStateStaged) being mapped to dism state 3(DISM_INSTALL_STATE_STAGED) - CDISMPackage::LogInstallStateMapping
2014-05-29 16:53:59, Info DISM DISM Package Manager: PID=8324 Initiating Changes on Package with values: 4, 7 - CDISMPackage::Internal_ChangePackageState
2014-05-29 16:54:00, Info DISM PID=4640 Scratch directory set to 'C:\Users\TBG\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
2014-05-29 16:54:00, Info DISM PID=4640 Successfully loaded the ImageSession at "C:\Windows\System32\Dism" - CDISMManager::LoadImageSession
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Failed to get and initialize the PE Provider. Continuing by assuming that it
is not a WinPE image. - CDISMProviderStore::Final_OnConnect
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info DISM DISM Manager: PID=4640 Successfully created the local image session and provider store. - CDISMManager::CreateLocalImageSession
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info DISM DISM.EXE:
2014-05-29 16:54:00, Info DISM DISM.EXE: <----- Starting Dism.exe session ----->
2014-05-29 16:54:00, Info DISM DISM.EXE:
2014-05-29 16:54:00, Info DISM DISM.EXE: Host machine information: OS Version=6.1.7601, Running architecture=amd64, Number of processors=4
2014-05-29 16:54:00, Info DISM DISM.EXE: Executing command line: c:\windows\sysnative\dism.exe
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Getting the collection of providers from a local provider store type. - CDISMProviderStore::GetProviderCollection
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Loading Provider from location C:\Windows\System32\Dism\WimProvider.dll - CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Connecting to the provider located at C:\Windows\System32\Dism\WimProvider.dll. -
CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Loading Provider from location C:\Windows\System32\Dism\FolderProvider.dll - CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Connecting to the provider located at C:\Windows\System32\Dism\FolderProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Loading Provider from location C:\Windows\System32\Dism\CompatProvider.dll - CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Connecting to the provider located at C:\Windows\System32\Dism\CompatProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:54:00, Info DISM DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
2014-05-29 16:54:00, Info DISM DISM.EXE: Attempting to add the commands from provider: WimManager
2014-05-29 16:54:00, Info DISM DISM.EXE: Getting the help information collection for the provider: WimManager.
2014-05-29 16:54:00, Info DISM DISM.EXE: Registering information from the help collection from provider: WimManager.
2014-05-29 16:54:00, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(wimcommands) and category(localtoplevelhelp) for the provider(WimManager).
2014-05-29 16:54:00, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(cleanup-wim) and category(wimcommands) for the provider(WimManager).
2014-05-29 16:54:00, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(remount-wim) and category(wimcommands) for the provider(WimManager).
2014-05-29 16:54:00, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(mount-wim) and category(wimcommands) for the provider(WimManager).
2014-05-29 16:54:00, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(unmount-wim) and category(wimcommands) for the provider(WimManager).
2014-05-29 16:54:00, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(commit-wim) and category(wimcommands) for the provider(WimManager).
2014-05-29 16:54:00, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(get-wiminfo) and category(wimcommands) for the provider(WimManager).
2014-05-29 16:54:00, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(get-mountedwiminfo) and category(wimcommands) for the
provider(WimManager).
2014-05-29 16:54:00, Info DISM DISM.EXE: Attempting to add the commands from provider: FolderManager
2014-05-29 16:54:00, Info DISM DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
2014-05-29 16:54:00, Info DISM DISM.EXE: Attempting to add the commands from provider: Compatibility Manager
2014-05-29 16:54:00, Info DISM DISM.EXE: Getting the help information collection for the provider: Compatibility Manager.
2014-05-29 16:54:00, Info DISM DISM.EXE: Image session has been closed. Reboot required=no.
2014-05-29 16:54:00, Info DISM DISM.EXE:
2014-05-29 16:54:00, Info DISM DISM.EXE: <----- Ending Dism.exe session ----->
Taweesak Archawamaitreekool -
Satellite P750: Unable to install Bluetooth Stack driver on Windows 7 (x64)
Hello.
I own a *Satellite P750-02T* (Part no. *PSAY3A-02T001*).
In the order what I did:
1) I formatted its HDD and reinstalled OS to *Windows 7 x64 Ultimate SP1*.
Then I downloaded *ONLY BIOS and the drivers* from [its Downloads page|http://www.mytoshiba.com.au/support/computers/satellite/p750/psay3a-02t001/download?os=25] :
2) I updated its BIOS to *v1.90* (the laptop came with v1.80)
3) I installed all the drivers:
- both LAN and WiFi
- Intel Chipset (latest available)
- all video drivers (Intel HD Graphics, NVIDIA Graphics, and Intel HDMI)
- Card Reader
- Realtek HD Audio (latest)
- Synaptics Touchpad
- USB3.0
- IR
- TV-Tuner
However, I'm *unable to install the Bluetooth driver (v8.00.06(T)* )...
When I run setup from the [above-mentioned page|http://www.mytoshiba.com.au/support/computers/satellite/p750/psay3a-02t001/download?os=25] it partially detects *'Bluetooth USB Controller-10 from TOSHIBA'* (USB\VID_0930&PID_0215&REV_001)
and then installation simply freezes displaying +'Installing the Bluetooth Driver. Please wait+.' and stays like that forever...
I also tried downloading a driver from [another location|http://aps2.toshiba-tro.de/bluetooth/index.php?page=download-toshiba] for TOSHIBA notebooks - v8.00.02(T):
and followed installation instructions displayed under 'Details'
but there was the same outcome - the setup simply freezes...
Installing Hotfix (*KB978258*) recommended there didn't work either - the message '+The update is not applicable to your computer+' pops up.
And I understand why - this Hotfix is [already included|http://download.microsoft.com/download/E/B/A/EBA55FE2-373A-4351-9346-6D762B79AA69/Updates%20in%20Win7%20and%20WS08R2%20SP1.xls] into Service Pack 1 for MS Windows 7.
I spent hours searching on the Internet for a solution. Although there were some similar cases none of the recommendations actually worked. I tried installing:
- WiFi driver before installing Bluetooth (someone suggested that those two are the parts of the same card);
- resuming installation in Safe Mode;
- *Toshiba Value Added Package* hoping those tools somehow will kick in.
Nothing worked...
It's interesting that when for the sake of experiment I tried to run installation for my generic Bluetooth adapter (using the driver [for non-TOSHIBA notebooks|http://aps2.toshiba-tro.de/bluetooth/index.php?page=download]) then everything run smoothly!
*Using Bluetooth connection on this laptop is very crucial for me.*
I hope I shall not have to return this wonderful notebook as I know TOSHIBA is one of the best manufactures and am sure there is a solution to this problem.
Thank you very much.
Evgeny.
Message was edited by: CVD
clarified about using another generic Bluetooth adapter with non-TOSHIBA driverFor FN functionality you must install Toshba Value added package. Toshiba flash cards utility is part of this package.
I dont know if P750 has WLAN switch but before you start BT installation be sure WLAN LED is ON.
BTW here is installation order for Win7 on Satellite P750 (European but the same order must be for your Australian model):
Win7 64bit SP1
PatchFiles V1.0
PlayReady PC Runtime V1.3
Sun Java2 Runtime Environment 1.6.0_20
TOSHIBA Assist 4.02.02
TOSHIBA Bulletin Board 2.1.10
TOSHIBA ReelTime 1.7.17.0
Intel Chipset SW Installation Utility 9.2.0.1015
Intel Management Engine Interface V7.0.4.1197
Intel Display Driver 8.15.10.2353
NVIDIA Display Driver 267.44
Intel Rapid Storage Technology Driver 10.1.2.1004
TOSHIBA Supervisor Password Utility 1.63.51.2C
TOSHIBA HW Setup Utility 1.63.1.34C
TOSHIBA Flash Cards Support Utility 1.63.0.12
TOSHIBA Value Added Package 1.5.4.64
NVIDIA HD Audio Driver 1.1.13.1
Realtek Audio Driver 6.0.1.6305
TOSHIBA Wireless LAN Indicator 1.0.3
Intel Wireless LAN Driver
Synaptics Touch Pad Driver 15.2.11.1
TOSHIBA HDD Protection 2.2.1.13
Atheros Bluetooth Filter Driver Package v1.0.4
Bluetooth Stack for Windows by Toshiba v8.00.06(T)
Realtek LAN Driver 7.038.0113.2011
Jmicron Card Reader 1.00.57.02
ENE CIR Driver V3.2
YUAN DVB-T/ATSC Tuner Driver V2.3.3.41
USB3.0 Driver 2.0.34.0
TOSHIBA Sleep Utility 1.4.2.7
TOSHIBA Face Recognition 3.1.9
TOSHIBA eco Utility 1.2.24.64
Intel Proset 14.0.2.0.1.s64_wCAT
TOSHIBA HDD/SSD Alert 3.1.64.8
TOSHIBA Service Station 2.1.52
HDMI Control Manager 2.0.0.7.64
TOSHIBA Remote Control Manager 3.0.6.1
TOSHIBA PC Health Monitor 1.7.5.64
ConfigFree
TOSHIBA Web Camera Application
TOSHIBA Network Device ID Registry Setting Tool 3.0.32.4-14_wMSI
TOSHIBA Media Controller 1.0.86.2
TOSHIBA Media Controller Plug-in 1.0.6.1
TOSHIBA Resolution+ Plug-in for Windows Media Player 1.1.0
Intel Wireless Display 2.0.29T2
PatchFiles PCIIDEREG-1.2
PatchFiles
I hope this will help you a bit. -
Portege M200: How to rectify Bluetooth Stack upgrade failure
I was upgrading the Bluetooth stack of my portege M200 with the drivers posted on Toshiba's website. during the end my laptop hung up. Had no option but to resatart the same.
Eversince all bluetooth functionality is showing errors, whenever I am trying to reinstall or unisntall the incomplete installation, I get a message that 'look for Bluetooth Stack for Windows from Toshiba.msi' as there is no installtion record of the same.
Now-neither can I uninstall the half installation of the upgrade niether can I re-install the upgrade.
I am in a fix and need help???.
Is there a way to rectify this problemStill dosent help, when I tried installing the old driver, I guess it looked at the current installation of the new driver and it needed to uninstall that first. I still got the same message 'The feature that you are trying to use is available on another network' and is looking for the file at the following address 'U:\nbtools\__XPT_Tools-CDs\PMR400288EU0 EN FR GR IT Firebolt10 SPM20 XPT CD1\Bluetooth Stack\UK\'.
I am sure that there must be a method to nullify this installation from the registry and install and over-write the new installation completely.
I have never worked on the registry before. I try to recover the system
Thanks for helping
Bye -
Installation Fails on Debian Stable 64 bit
Hi There
I have been trying to install skype for a while. The i386 architecture has already been enabled, and the repositories have been updated. I have repeated the process several times just to be sure.
During skype installation a bunch of conflicts occur and aptitude can only install skype by uninstalling most of my system, at which point I have to abort the installation. I have tried many different packages, including Ubuntu packages, old packages, old static packages, tarballs. Nothing helps. Here is the output from the terminal:
rojaslee@debian:~$ su
Password:
root@debian:/home/rojaslee# wget -O skype-install.deb http://www.skype.com/go/getskype-linux-deb
--2014-08-04 17:02:30-- http://www.skype.com/go/getskype-linux-deb
Resolving www.skype.com (www.skype.com)... 157.56.109.9
Connecting to www.skype.com (www.skype.com)|157.56.109.9|:80... connected.
HTTP request sent, awaiting response... 302 Found
Location: http://www.skype.com/go/getskype-linux-deb-32 [following]
--2014-08-04 17:02:30-- http://www.skype.com/go/getskype-linux-deb-32
Reusing existing connection to www.skype.com:80.
HTTP request sent, awaiting response... 302 Found
Location: http://download.skype.com/linux/skype-debian_4.3.0.37-1_i386.deb [following]
--2014-08-04 17:02:30-- http://download.skype.com/linux/skype-debian_4.3.0.37-1_i386.deb
Resolving download.skype.com (download.skype.com)... 23.15.9.139, 23.15.9.144
Connecting to download.skype.com (download.skype.com)|23.15.9.139|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 20118938 (19M) [application/octet-stream]
Saving to: `skype-install.deb'
100%[======================================>] 20,118,938 2.10M/s in 11s
2014-08-04 17:02:41 (1.81 MB/s) - `skype-install.deb' saved [20118938/20118938]
root@debian:/home/rojaslee# dpkg -i skype-install.deb
Selecting previously unselected package skype.
(Reading database ... 192729 files and directories currently installed.)
Unpacking skype (from skype-install.deb) ...
dpkg: dependency problems prevent configuration of skype:
skype depends on libc6 (>= 2.3.6-6~).
skype depends on libc6 (>= 2.7).
skype depends on libgcc1 (>= 1:4.1.1).
skype depends on libqt4-dbus (>= 4:4.5.3).
skype depends on libqt4-network (>= 4:4.8.0).
skype depends on libqt4-xml (>= 4:4.5.3).
skype depends on libqtcore4 (>= 4:4.7.0~beta1).
skype depends on libqtgui4 (>= 4:4.8.0).
skype depends on libqtwebkit4 (>= 2.1.0~2011week13).
skype depends on libstdc++6 (>= 4.2.1).
skype depends on libx11-6.
skype depends on libxext6.
skype depends on libxss1.
skype depends on libxv1.
skype depends on libssl1.0.0.
skype depends on libpulse0.
skype depends on libasound2-plugins.
dpkg: error processing skype (--install):
dependency problems - leaving unconfigured
Processing triggers for desktop-file-utils ...
Processing triggers for hicolor-icon-theme ...
Errors were encountered while processing:
skype
root@debian:/home/rojaslee# apt-get -f install
Reading package lists... Done
Building dependency tree
Reading state information... Done
Correcting dependencies... Done
The following packages were automatically installed and are no longer required:
apache2.2-bin arj caja caja-common clearlooks-phenix-theme cli-common
cmake-data dmz-cursor-theme engrampa-common eom-common ffmpegthumbnailer
ffmpegthumbnailer-caja geany-common git-man gtk2-engines-pixbuf
gtk3-engines-unico hddtemp ibus-clutter ibus-gtk ibus-gtk3 ibus-qt4
im-config libapache2-mod-dnssd libapr1 libaprutil1 libaprutil1-dbd-sqlite3
libaprutil1-ldap libavahi-compat-libdnssd1 libavdevice53
libboost-system1.55.0 libclutter-1.0-0 libclutter-1.0-common
libclutter-imcontext-0.1-0 libclutter-imcontext-0.1-bin libcogl-common
libcogl-pango0 libcogl9 libelf1 liberror-perl libffmpegthumbnailer4
libgdiplus libgladeui-1-9 libgoocanvas-common libgoocanvas3 libgsoap2
libgtksourceview2.0-0 libgtksourceview2.0-common libhangul-data
libibus-1.0-0 libibus-qt1 libjson-glib-1.0-0 libmate libmate-common
libmatecanvas libmatecomponent libmatecomponentui libmatekbd libmatemenu
libmatepanelapplet libmatepolkit libmateui libmatevfs libmateweather
libmateweather-common libmatewnck libmatewnck-common libmlt++3 libmlt-data
libmlt5 libmono-accessibility4.0-cil libmono-corlib4.0-cil
libmono-i18n-west4.0-cil libmono-i18n4.0-cil libmono-security4.0-cil
libmono-system-configuration4.0-cil libmono-system-security4.0-cil
libmono-system-xml4.0-cil libmono-system4.0-cil libpgm-5.1-0 libprotobuf7
libquicktime2 librpm3 librpmbuild3 librpmio3 librpmsign1 libsox-fmt-alsa
libsox-fmt-base libsox2 libtasn1-3-bin libvncserver0 libwebcam0
libxmlrpc-core-c3 libxres1 mate-applets-common mate-backgrounds mate-desktop
mate-desktop-common mate-desktop-gnome mate-keyring mate-media
mate-media-common mate-media-gstreamer mate-menus mate-mime-data mate-panel
mate-panel-common mate-polkit mate-power-manager-common mate-settings-daemon
mate-settings-daemon-common mate-settings-daemon-gstreamer mate-themes
mate-vfs mate-vfs-common melt menu-xdg mono-4.0-gac mono-gac mono-runtime
openshot-doc p7zip-full pointlinux-faenza-icon-theme
pointlinux-mate-backgrounds pointlinux-mate-themes python-application
python-cjson python-crypto python-dateutil python-dnspython python-eventlib
python-gnutls python-greenlet python-gtksourceview2 python-httplib2
python-ibus python-lxml python-mate-desktop python-msrplib python-openssl
python-pam python-psutil python-pyasn1 python-pygoocanvas python-serial
python-twisted-bin python-twisted-conch python-twisted-core
python-twisted-lore python-twisted-mail python-twisted-names
python-twisted-news python-twisted-web python-twisted-words python-xcaplib
python-xdg python-zope.interface rpm rpm-common rpm2cpio tcl tcl8.5 tk tk8.5
uvcdynctrl uvcdynctrl-data x11vnc x11vnc-data zenity zenity-common
Use 'apt-get autoremove' to remove them.
The following packages will be REMOVED:
a2ps armory atril binfmt-support bitcoind blink cdrdao cmake cryptsetup
cups-pk-helper dropbox engrampa eom epdfview flashplugin-nonfree geany git
gnome-disk-utility google-talkplugin gparted grub-pc grub-pc-bin
gtk2-engines-xfce guvcview ibus ibus-hangul icedtea-6-jre-cacao
icedtea-6-jre-jamvm keepass2 libao4 libatkmm-1.6-1 libatril
libavahi-ui-gtk3-0 libboost-chrono1.55.0 libboost-filesystem1.55.0
libboost-program-options1.55.0 libboost-thread1.55.0 libcairo-perl
libcairomm-1.0-1 libdb5.3++ libdjvulibre21 libgarcon-1-0 libgdu-gtk0
libglib-perl libglibmm-2.4-1c2a libgtkmm-2.4-1c2a libhal-storage1 libhal1
libhangul1 libjpeg-progs libjpeg62 libkprintutils4 libmarco libmatebluetooth
libmatesensorsappletplugin libminiupnpc10 libmono-data-tds4.0-cil
libmono-posix4.0-cil libmono-system-data4.0-cil
libmono-system-drawing4.0-cil libmono-system-enterpriseservices4.0-cil
libmono-system-transactions4.0-cil libmono-system-windows-forms4.0-cil
libmono-webbrowser4.0-cil libmsgpack-dev libmsgpack3 libmsgpackc2
libmysqlclient18 libnm-glib-vpn1 libnm-glib4 libnm-gtk0 libnm-util2
libokularcore1 liboobs-1-5 libpangomm-1.4-1 libpoppler-qt4-3 libportaudio2
libprotobuf-dev libprotobuf-lite7 libprotoc7 libqimageblitz4
libqt4-sql-mysql libreoffice libreoffice-calc libreoffice-gtk libsane-extras
libslp1 libsocket-perl libspectre1 libt1-5 libtagc0 libthunar-vfs-1-2
libunique-3.0-0 libwnck22 libzmq-dev libzmq1 lightdm lm-sensors marco
mate-applets mate-bluetooth mate-calc mate-control-center mate-core
mate-desktop-environment mate-dialogs mate-netspeed mate-power-manager
mate-screensaver mate-sensors-applet mate-session-manager
mate-system-monitor mate-system-tools mate-terminal mate-text-editor
mate-user-share mate-utils mate-window-manager minissdpd mousepad mozo
network-manager network-manager-gnome okular open-vm-toolbox openshot
pcmciautils pkg-config powertop printer-driver-c2esp printer-driver-m2300w
protobuf-compiler python-corba python-mate python-mate-menu python-mlt5
python-sipsimple python-twisted python-twisted-runner skype:i386 smbclient
squeeze synaptic system-tools-backends tumbler virtualbox virtualbox-dkms
virtualbox-guest-dkms virtualbox-guest-utils virtualbox-guest-x11
virtualbox-qt xarchiver xcalib xfce4-taskmanager xfce4-terminal xinput
0 upgraded, 0 newly installed, 156 to remove and 0 not upgraded.
1 not fully installed or removed.
After this operation, 539 MB disk space will be freed.
Do you want to continue [Y/n]? n
Abort.
root@debian:/home/rojaslee#Hi
Similar error with me: Installation fails due to the missing lib libqtwebkit4:i386 - it cannot been installed:
root@.../skype-4.3.0.37# aptitude install libqtwebkit4:i386
The following NEW packages will be installed:
libgstreamer-plugins-base0.10-0:i386{a} libgstreamer0.10-0:i386{a} libqtwebkit4:i386 libsqlite3-0:i386{ab}
0 packages upgraded, 4 newly installed, 0 to remove and 2 not upgraded.
Need to get 9,138 kB of archives. After unpacking 32.7 MB will be used.
The following packages have unmet dependencies:
libsqlite3-0 : Breaks: libsqlite3-0:i386 (!= 3.7.17-1~bpo70+1) but 3.7.13-1+deb7u1 is to be installed.
libsqlite3-0:i386 : Breaks: libsqlite3-0 (!= 3.7.13-1+deb7u1) but 3.7.17-1~bpo70+1 is installed.
The following actions will resolve these dependencies:
Keep the following packages at their current version:
1) libqtwebkit4:i386 [Not Installed]
2) libsqlite3-0:i386 [Not Installed]
Accept this solution? [Y/n/q/?]
If I would want to uninstall libsqlite3-0 and change to the i386-version (which would resolve the problem), I would uninstall most of my system...
Skype/MS: Please provide solution, best would be, creating a proper 64Bit-package, so the whole i386-crap could be forgotten...
If anybody has a solution, I would appreciate help, as - unfortunately - for some reasons I kind of depend on Skype
Kind regards
[Removed for privacy] -
How to restart Java Engine in ABAP+JAVA dual stack installation ?
Dear Experts
if i use stopsap r3 in this dual stack installation - it stops both ABAP & JAVA Web Application Servers.
I want to restart only JAVA Weba pplication server.
How do it ?
Thaks in Advance !
RgdsBut theoritically they are 2 indpeendent installations like
AS ABAP
AS JAVA
..Do you aggree ?? really am not good on basics!!
During the installation also - if select AS ABAP & AS JAVA - it will become dual installation
and it does not show
any dependency while installing that AS JAVA requires AS ABAP.[Installation Component Selection and Dependency Screen shot|http://i303.photobucket.com/albums/nn153/S0002919350/SAP%20Issues/Oracle_Patches.jpg]
Installation Component Selection and Dependency Screen shot
Is it because if AS ABAP is down - AS JAVA UME is 001 client - and Java authentication fails ?
Can we de attatch from ABAP UME for my requirement like - running JAVA WAS alone w/o ABAP.
Regards
PR
Regards
Edited by: P.R. SRINIVAS on Jun 16, 2008 4:15 PM -
Adobe Premiere and After Effects CS6 installer failed to initialize on Mac Book Air
Hi everybody,
I'm trying to install Adobe Premiere and After Effects CS6 for at least a month now.
I have downloaded the .dmg file at the Adobe Website and it starts to initializing the installer, then a error show up:
"The installer could not initialize. Download the Adobe Support Advisor."
There is no Adobe Support Advisor when I clicked on the link. "The Adobe Support Advisor has been discontinued" (http://www.adobe.com/support/loganalyzer/)
I've tried this many times, but every time being a failure.
EtreCheck version: 2.1.8 (121)
Report generated 19 de abril de 2015 16:29:58 BRT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Air (13-inch, Mid 2013) (Technical Specifications)
MacBook Air - model: MacBookAir6,2
1 1.3 GHz Intel Core i5 CPU: 2-core
4 GB RAM Not upgradeable
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en0: 802.11 a/b/g/n/ac
Battery Health: Normal - Cycle count 93
Video Information: ℹ️
Intel HD Graphics 5000
Color LCD 1440 x 900
System Software: ℹ️
OS X 10.10.3 (14D131) - Time since boot: 0:0:38
Disk Information: ℹ️
APPLE SSD SD0128F disk0 : (121,33 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / [Startup]: 120.10 GB (11.53 GB free) (Low!)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 120.47 GB Online
USB Information: ℹ️
Apple Internal Memory Card Reader
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Anywhere
Kernel Extensions: ℹ️
/Library/Application Support/Avast/components/fileshield/unsigned
[loaded] com.avast.AvastFileShield (2.1.0 - SDK 10.10) [Click for support]
/Library/Application Support/Avast/components/proxy/unsigned
[loaded] com.avast.PacketForwarder (2.0 - SDK 10.10) [Click for support]
/Library/Application Support/VirtualBox
[loaded] org.virtualbox.kext.VBoxDrv (4.3.16) [Click for support]
[loaded] org.virtualbox.kext.VBoxNetAdp (4.3.16) [Click for support]
[loaded] org.virtualbox.kext.VBoxNetFlt (4.3.16) [Click for support]
[loaded] org.virtualbox.kext.VBoxUSB (4.3.16) [Click for support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.CS5ServiceManager.plist [Click for support]
[running] com.avast.update-agent.plist [Click for support]
[loaded] com.avast.userinit.plist [Click for support]
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[loaded] com.avast.init.plist [Click for support]
[loaded] com.avast.uninstall.plist [Click for support]
[loaded] com.avast.update.plist [Click for support]
[loaded] com.macpaw.CleanMyMac2.Agent.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Click for support]
[not loaded] org.virtualbox.startup.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.avast.home.userinit.plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[not loaded] org.virtualbox.vboxwebsrv.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Aplicativo (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox Aplicativo (/Applications/Dropbox.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
SharePointBrowserPlugin: Version: 14.4.0 - SDK 10.6 [Click for support]
DirectorShockwave: Version: 12.1.3r153 - SDK 10.6 [Click for support]
JavaAppletPlugin: Version: Java 8 Update 31 Check version
User internet Plug-ins: ℹ️
npsf_cef: Version: sf 3.3.2.1 [Click for support]
Safari Extensions: ℹ️
Avast Online Security
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Java [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 120.10 GB Disk used: 108.57 GB
Destinations:
HD Hayra [Local]
Total size: 499.75 GB
Total number of backups: 3
Oldest backup: 2014-09-04 21:52:41 +0000
Last backup: 2015-01-18 03:21:42 +0000
Size of backup disk: Excellent
Backup size 499.75 GB > (Disk size 120.10 GB X 3)
Top Processes by CPU: ℹ️
31% com.avast.daemon
17% lsregister
5% identityservicesd
3% WindowServer
2% coreservicesd
Top Processes by Memory: ℹ️
147 MB com.avast.daemon
103 MB Spotlight
77 MB Dropbox
73 MB ocspd
60 MB com.apple.WebKit.WebContent
Virtual Memory Information: ℹ️
352 MB Free RAM
1.84 GB Active RAM
1.47 GB Inactive RAM
628 MB Wired RAM
1.96 GB Page-ins
12 KB Page-outs
Diagnostics Information: ℹ️
Apr 19, 2015, 04:27:45 PM Self test - passed
Apr 19, 2015, 02:41:40 PM /Library/Logs/DiagnosticReports/com.avast.daemon_2015-04-19-144140_[redacted].cpu_resourc e.diag [Click for details]
Apr 17, 2015, 12:00:21 AM /Users/[redacted]/Library/Logs/DiagnosticReports/iMovie_2015-04-17-000021_[redacted].cras h
Apr 16, 2015, 11:59:35 PM /Users/[redacted]/Library/Logs/DiagnosticReports/iMovie_2015-04-16-235935_[redacted].cras h
Apr 16, 2015, 11:01:55 PM /Users/[redacted]/Library/Logs/DiagnosticReports/XPCKeychainSandboxCheck_2015-04-16-23015 5_[redacted].crash
Apr 16, 2015, 09:39:44 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Finder_2015-04-16-213944_[redacted].cras hHi Thomas,
Kindly try the below mentioned link.
Error: "Installer failed to initialize" | Windows
Thanks,
Atul Saini -
Problem removing bluetooth stack / hidden devices / COM ports not released
Hi
Having problem completely removing Toshiba Bluetooth stack / hidden devices / com ports not released
I uninstalled Toshiba BT s/w...
But:
1) Toshiba BT hidden devices still appear and I can not remove (get error)
2) COM ports occupied by Toshiba BT not released (so they cannot be used by another BT stack) and still appear in registry
ex: friendly name Toshiba BT Port (COM4) still in registry
3) These unreleased com ports do NOT appear in device manager
ThanksIt seems that you still have some configurations which were not removed during the uninstallation.
This means that the resources can not be release, because those are still necessary in case of a
new installation of the stack.
The first I would try is the following:
- Install the latest Toshiba Bluetooth stack.
- Uninstall it. Ensure that you answer all questions with "yes" ! This means also the one which asks if all configurations should be removed.
- Reboot
- Check again -
SCOM 2012 Installation fails while deploying Datawarehouse
Hi All,
I have a strange issue, My SCOM 2012 installation fails during Datawarehouse deployment. (This setup is not SCOM 2012 SP1 OR 2012 R2 it is just SCOM 2012)
When i check the SCOM installation logs it says it tried to connect to my Management server and it could not open Port 5724.
During the installation i checked that the SDK Service was stopping frequently and also a Visual studio debugger popup also occured. Can any one assist in solving the issue ?
Screenshots:
Error logs
Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingComponent.GetExistingManagementServerFromOMDB(String omSQLServer, Nullable`1 omSqlPort, String omDatabaseName, String& firstWorkingManagementServer)
[01:08:57]: Error:
:Inner Exception.Type: System.ServiceModel.EndpointNotFoundException, Exception Error Code: 0x80131500, Exception.Message: Could not connect to net.tcp://My management server:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:03.0079280.
TCP error code 10061: No connection could be made because the target machine actively refused it 172.17.221.45:5724.
[01:08:57]: Error:
:InnerException.StackTrace:
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
[01:08:57]: Error:
:Inner Exception.Type: System.Net.Sockets.SocketException, Exception Error Code: 0x80131500, Exception.Message: No connection could be made because the target machine actively refused it 172.17.221.45:5724
[01:08:57]: Error:
:InnerException.StackTrace: at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
[01:08:57]: Always:
:Management Server My management server failed to connect, now trying another one.
[01:08:57]: Warn:
:Failed to connect to any SDK in the management group, trying again
[01:09:17]: Info:
:Info:trying to connect with server My management server
[01:09:26]: Info:
:Info:Error while connecting to management server: The Data Access service is either not running or not yet initialized. Check the event log for more information.
[01:09:26]: Error:
:Couldn't connect to mgt server stack: : Threw Exception.Type: Microsoft.EnterpriseManagement.Common.ServiceNotRunningException, Exception Error Code: 0x80131500, Exception.Message: The Data Access service is either not running or not yet initialized.
Check the event log for more information.
[01:09:26]: Error:
:StackTrace: at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(Exception ex)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore clientCallback)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
at Microsoft.EnterpriseManagement.ManagementGroup.InternalInitialize(EnterpriseManagementConnectionSettings connectionSettings, ManagementGroupInternal internals)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingComponent.GetExistingManagementServerFromOMDB(String omSQLServer, Nullable`1 omSqlPort, String omDatabaseName, String& firstWorkingManagementServer)
[01:09:26]: Error:
:Inner Exception.Type: System.ServiceModel.EndpointNotFoundException, Exception Error Code: 0x80131500, Exception.Message: Could not connect to net.tcp://My management server:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:03.0040216.
TCP error code 10061: No connection could be made because the target machine actively refused it 172.17.221.45:5724.
[01:09:26]: Error:
:InnerException.StackTrace:
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
[01:09:26]: Error:
:Inner Exception.Type: System.Net.Sockets.SocketException, Exception Error Code: 0x80131500, Exception.Message: No connection could be made because the target machine actively refused it 172.17.221.45:5724
[01:09:26]: Error:
:InnerException.StackTrace: at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
[01:09:26]: Always:
:Management Server My management server failed to connect, now trying another one.
[01:09:26]: Warn:
:Failed to connect to any SDK in the management group, trying again
[01:09:46]: Error:
:Error:Could not connect to management group. Can not continue with DW upgrade...
[01:09:46]: Info:
:Info:got MG connection
[01:09:46]: Error:
:Error:Could not connect to management group. Cannot continue with current action...
[01:09:46]: Error:
:FATAL ACTION: GetManagementGroup
[01:09:46]: Error:
:FATAL ACTION: DWInstallActionsPostProcessor
[01:09:46]: Error:
:ProcessInstalls: Running the PostProcessDelegate returned false.
[01:09:46]: Always:
:SetErrorType: Setting VitalFailure. currentInstallItem: Data Warehouse Configuration
[01:09:46]: Error:
:ProcessInstalls: Running the PostProcessDelegate for OMDATAWAREHOUSE failed.... This is a fatal item. Setting rollback.
[01:09:46]: Info:
:SetProgressScreen: FinishMinorStep.
[01:09:46]: Always:
:!***** Installing: OMCONSOLE ***
[01:09:46]: Info:
:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
[01:09:46]: Always:
[01:09:46]: Always:
:****Starting*RollBack*******************************************
[01:09:46]: Always:
[01:09:46]: Info:
:SetProgressScreen: StartMinorStep.
[01:09:46]: Info:
:SetProgressScreen: StartMinorStep.
[01:09:46]: Debug:
:ProcessInstalls: Install Item Data Warehouse Configuration has a Preprocessing delegate of RunXamlPreProcessor. Launching it now.
[01:09:46]: Always:
:Determining actions to be run.
[01:09:46]: Always:
:Done validating action list; now running individual actions.
[01:09:46]: Always:
:Current Action: UninstallPrePreprocessor
[01:09:46]: Info:
:UninstallPrePreprocessor completed.
[01:09:46]: Always:
:Current Action: UpgradePreprocessor
[01:09:46]: Info:
:UpgradePreprocessor completed.
[01:09:46]: Always:
:LaunchExeSetup: Launching E:\SCOM setups\SCOM 2012\Setup\AMD64\SetupInstallItem.exe with arguments:
[01:09:46]: Info:
:SetProgressScreen: Init Exe Install progress.
[01:09:47]: Always:
:LaunchExeSetup: Install return value was: 0
[01:09:47]: Info:
:CheckPointPassed is removing the Rollback property as this is an uninstall.
[01:09:47]: Always:
:SetErrorType: Setting VitalFailure. currentInstallItem: Data Warehouse
Gautam.75801Hi All,
So i got the actual commands to register the SPN. So the above were wrong. Hope the below is useful for some one if the face the above issue.
In Windows Server 2008R2 – the command is SETSPN –A. In WS2012, it changed to SETPSPN –S which checks for duplicates before it allows you to create them.
Legend: SCOM Server - SCOMSVR.Contoso.com
DNS Domain: Contoso.com
SDK Account: SDKSVC
To add SPN for the SDK Service:
===================================
In Win2k 12
setspn -S MSOMSdkSvc/SCOM Server FQDN Domain\SDK Account name
setspn -S MSOMSdkSvc/SCOM Server name without FQDN Domain\SDK Account name
Ex: setspn -S MSOMSdkSvc/SCOMSVR.Contoso.com Contoso\SDKSVC
setspn -S MSOMSdkSvc/SCOMSVR Contoso\SDKSVC
In Win2k8
setspn -A MSOMSdkSvc/SCOM Server FQDN Domain\SDK Account name
setspn -A MSOMSdkSvc/SCOM Server name without FQDN Domain\SDK Account name
Ex: setspn -A MSOMSdkSvc/SCOMSVR.Contoso.com Contoso\SDKSVC
setspn -A MSOMSdkSvc/SCOMSVR Contoso\SDKSVC
To verify the SPN's
============================
1. setspn -L MS Host name without FQDN
Ex: setspn -L SCOMSVR
2. setspn -L Domain\DSK Action account
Ex: setspn -L Contoso\SDKSVC
Post entering the above commands you should see the entries of the Healthservice and not the entries of the SDK Service.
1. If you are are using a Domain account for SDK / DAS then that entry should not appear when execute the command “setspn -L SCOMSVR”. Where SCOMSVR is the name of the MS and it should be without FQDN.
Example: The below entry should not appear when you enter setspn -L SCOMSVR
MSOMSdkSvc/SCOMSVR
MSOMSdkSvc/SCOMSVR.contoso.com
If you get the above entries for "setspn -L SCOMSVR" then you need to delete and re add the SPN again and re check.
If you get Duplicate entries the below post entering "setspn -L Contoso\SDKSVC" then you need to delete the duplicate entries and re add the SPN again and re check.
Ex: MSOMSdkSvc/SCOMSVR
MSOMSdkSvc/SCOMSVR.contoso.com
MSOMSdkSvc/SCOMSVR.contoso.com
MSOMSdkSvc/SCOMSVR
To delete a SPN if required:
===============================
setspn -D MSOMSdkSvc/SCOM MS FQDN Hostname without FQDN Hostname
setspn -D MSOMSdkSvc/Hostname without FQDN Hostname without FQDN again
Ex: setspn -D MSOMSdkSvc/SCOMSVR.Contoso.com SCOMSVR
setspn -D MSOMSdkSvc/SCOMSVR SCOMSVR
Reference used : http://blogs.technet.com/b/kevinholman/archive/2011/08/08/opsmgr-2012-what-should-the-spn-s-look-like.aspx
Gautam.75801 -
MBAM 2.5 Web App Installation Failed
MBAM 2.5 with SQL 2014 all-in-one Windows 2012 R2 Hyper-V VM.
Compliance & Recovery DB installation done.
When try to install Web App, I'm using the same domain account when create above 2 DB (read-write permission), but the installation failed with below error.
Unexpected Configurator error.
Description:
Exception thrown from feature provider.
Exception:
System.DirectoryServices.DirectoryServicesCOMException (0x8007052E): The user name or password is incorrect.
at System.DirectoryServices.DirectoryEntry.Bind(Boolean throwIfFail)
at System.DirectoryServices.DirectoryEntry.Bind()
at System.DirectoryServices.DirectoryEntry.get_AdsObject()
at System.DirectoryServices.DirectorySearcher.FindAll(Boolean findMoreThanOne)
at Microsoft.Mbam.Setup.Common.ActiveDirectory.DomainSearcher.FindAll()
at Microsoft.Mbam.Setup.Common.WebAdministration.SpnInfo.LoadSpnInfo(String spn, IDomainSearcher searcher, IActiveDirectoryHelper adHelper)
at Microsoft.Mbam.Setup.Common.WebAdministration.SpnInstaller.CheckSpnReadyStatus()
at Microsoft.Mbam.Setup.Common.ActionItemQueue.Run()
at Microsoft.Mbam.Setup.WebAdministration.WebProviderBase`1.CheckPrereqs(IProgress`1 progress, CancellationToken cancellationToken, T configuration)
at Microsoft.Mbam.Setup.Common.FeatureProviderBase`1.<>c__DisplayClass34`1.<InvokeAsync>b__33()
at System.Threading.Tasks.Task`1.InnerInvoke()
at System.Threading.Tasks.Task.Execute()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.Mbam.Setup.Common.FeatureProviderBase`1.<InvokeAsync>d__36`1.MoveNext()
Jasonfound my problem. a typo when I create SQL DB, I named it "Complianc", but I specify it as "Compliance" in web app installation wizard. the error logs miss leading me keep troubleshooting the kerberos
thanks all for the support.
Jason -
Question about Toshiba Bluetooth stack V.4
Hi
We have a Fujitsu Siemens P7120 Laptop which requires the Toshiba Bluetooth stack located at http://aps.toshiba-tro.de/Bluetooth/pages/download.php
When we install this in silent mode, the installation takes place however the Bluetooth does not initialise until the Toshiba Bluetooth information exchanger is launched!
Is there anyway to make the whole installation complete without this other step?You should use the BT-stack of FSC. I also tried to install an OEM version of the Toshiba BT-stack, but in this case it was time limited. So check the "About" menu item to get get more details.
-
How to use Satellite P100 with MS Vista and MS Bluetooth stack?
I'm using my Sat P100 for more than one year. I just reinstalled Windows Vista Ultimate from scratch, and because I'm really not so much satisfied with Toshiba's Bluetooth stack, I'm trying to use original Microsoft's Bluetooth stack, which comes with Vistas.
After reinstall, Windows found BT device and installed MS BT stack. Everything worked well, but ufetr downloading and installing tons of updates including SP1, BT device completely disappeared. I found some articles about how to switch from Toshiba to Microsoft BT Stack, but it seems to be a XP sollutions, and mainly it always need to install "Bluetooth Monitor for MS Stack", but I cannout find this download for MS VIsta.
Can anyone help? Thanx!I've got it!!!
I have fond one sollution: maybe not excellent, but working!
1. Check if you have latest Toshiba Bluetooth stack installed (here: http://aps2.toshiba-tro.de/bluetooth/?page=download)
1.1 If you have older version, uninstall it, reboot, install latest one, reboot.
1.2 If you don't have any version installed, install the latest one.
2. Assuming you installed to default location, copy this folder to any backup location, including complete directory structure: c:\Program Files\Toshiba\Bluetooth Toshiba Stack\
3. Go to Start/Control panel/Programs and Features and uninstall whole Toshiba Bluetooth stack, reboot
4. After rebooting, there is again "Bluetooth devices" applet in Control panels (it was previously disabled by Toshiba's Bluetooth Stack), but you cannot see any HW Bluetooth device
5. Go to backup location (into ..\Bluetooth Toshiba Stack\) and run AS.exe.
6. It will start installing BT devices, BT icon will appear in Tray.
7. Installer will hang on cca 5th box, but never mind, all drivers are already installed.
8. Maybe you can cancel installer, but I feared that it will roll-back installed drivers, so I simply killed this Install process (Ctrl+Alt+Del, Start Task manager, Select BT installer in Apps and Kill it)
9. Whow, it works now event after restarting.
10. Your feedback welcome! ;)
Massimo Filippi
Maybe you are looking for
-
"Save for Web" dialog window not working properly
Hello, I've been dealing with a bug since Illustrator CC that is very frustrating when I try to output my slices through Save For Web. When trying to click on the slices I've defined in order to name them-the click-does not happen where my mouse poin
-
I accidentally deleted GarageBand on my MacBook Pro, version 10.6.8. The new version of GarageBand is only compatible with 10.9 and above. Is it possible to still get the older version? OR, can I get another copy of the startup CD that came with m
-
Can't send iMessage to one of my contacts!
I suddenly cannot send iMessage to one of my contacts, but i 100% sure that person phone is turned on, imessage is work and did not block me. As that person can send me iMessage. And i have already tried all the steps to solve it, such as Restart you
-
How to open more than one RAW-File by drag&drop/doubleclick with CS2?
Hello, is it possible to open more than one RAW-file from iPhoto with Photoshop's RAW-converter in just one single step? If I drag&drop my selection to my Photoshop-Icon, PS opens just the iPhoto-created library-JPGs of the RAW-files but not the RAWs
-
Hello Experts, At my service scenario, I am gathering all costing by using DP90 profile and creating sales order. is there any configuration to disable any change at sales order after DP90 step? Regards, Amr