Bluetooth Sync problems, Treo 755P and Vista

I recently purchased a new computer with Windows Vista. After reading the posts I realized that syncing with USB would not work, so I added bluetooth to my computer (Targus USB bluetooth adapter). When I first set it up, my 755p and my PC synced just fine, then it just stopped working. I have checked the settings and drivers and I can't figure out the problem, and I cannot get it to work again. I have tried a soft reset of my 755p. any suggestions?
Post relates to: Treo 755p (Verizon)

Hello and thank you for using the Palm Help Forums!
Are you using Vista 64 bit or Vista 32 bit?
Post relates to: Treo 800w (Sprint)

Similar Messages

I am having trouble with Treo 755p and Sync in my new Mercury car.

I just got a Treo 755p. I can connect and get the phone and Sync to communicate. As soon as I make a call however, the sync system hangs up after one ring. I had to replace my Treo 650p which worked well with this car. Do I have a setting wrong in my phone. Suggestions?
Post relates to: Treo 755p (Verizon)

The jquery is there to animate the marquee, so even without the JS file the div container should still be showing up right? Part of the video tutorial said to switch to "live view" to make sure one of the div containers was positioning correctly, and when I do this nothing happens. It works for the guy on the tutorial so I am not sure what I am doing differently. Since it is not working at this point I have not added the jQuery, should I just assume it is a JQuery problem and continue on? I just don't understand why it is showing up in design view but just a blank white page in live view.

Palm Treo 755P and 7.02 Hotsync Causing Knip Fits . . . .

I decided to update my Palm Desktop SW from version 4.2 to the newest version 6.2 It is running on Windows XP Media Center 2005. Since I have done this (and uninstalled, reinstalled a couple times), the Palm Treo 755P hangs up at the sync of the Datebook (from Dataviz). When I unselect the Datebook conduit, it hangs up on the Address (Contacts). Also, every time Hotsync ends, I get the error that a problem has occurred and the program closes (every time). When I go back over to my other XP machine with Palm 4.2, everything works like a champ again. Can anyone explain why I am experiencing these two types of problems? Thanks in advance. BTW, if there is a thread that is solving these issues, please provide the link.
Post relates to: Treo 755p (Sprint)

It may be a corrupted install of Palm desktop. If you have all your data backed up on another PC and on the Treo, you will need to "clean" uninstall Palm desktop and re-install. I would suggest using 4.x version instead of 6.2. There have been data loss issues with 6.2. This can happen if Palm desktop is open and the PC shuts down, a Windows update happens with Palm desktop open.
During the re-install, skip the sync and finish the install. After the install is complete, change the conduits to handheld overwrites desktop and then sync.
Here are the "clean" uninstall instructions.
You should first make a copy of your data to have just in case something
happens. You can find your data files by going to C:\Program Files\Palm or
Palm One. Highlight your Palm Desktop username and right click and copy.
Then go to your PC desktop, right click on a blank spot and select paste.
If this is the first time you are installing Palm desktop and encountering a problem, skip the previous step.
For Palm desktop 6.2, look in the following location for the folders and files, my documents, PalmOS desktop. You will find the username folder in this location.
Now you want to uninstall Palm Desktop and remove everything that has to do
with Palm Desktop from your computer. Like the above folder, delete the Palm folder. Once this is done, you will need to delete some registry keys
from your PC Operating System registry.
Word of warning, going here and deleting the wrong thing can cause your PC
to not start up, crashing and deletion of programs and data. If you feel
you are unsure of yourself, see if you have a friend that can help you or a
PC technician that you can pay to help you. This will show them everything
they need to delete. To retain your current Registry settings, we need to do a backup of the Registry.
On the PC, go to start and run type "regedit" without quotes
Highlight MY COMPUTER, go to File --> export. Should pop up with a Save As
box. Current location is fine should be in My Documents or you can change to a location you will remember. In the file name box, type "Regbackup[todaysdate]" i.e. Regbackup07072008. Next, the hard part.
The easiest way to make sure your working with the correct key, highlight the key i.e. palm quick install, and press delete on your keyboard. It will ask you, are
you sure. Say yes. Do the same thing for all keys below.
If you make a mistake, stop what you are doing. And call a PC technician.
BUT do not turn off your computer.
The reg keys are as follows (Note: some of theses reg keys will not be here
but if they are delete them)
* HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install
* HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer
* HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop
* HKEY_CURRENT_USER\Software\Palm
* HKEY_CURRENT_USER\Software\Palm, Inc.
* HKEY_CURRENT_USER\Software\PalmDesktopAutorun
* HKEY_CURRENT_USER\Software\palmOne
* HKEY_CURRENT_USER\Software\PalmSource
* HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm
Next reboot your computer
Then reinstall your Palm desktop from the CD and do a hotsync. If it asks
you for a username, enter the name that is on your device in the upper right corner of the hotsync screen.
The best way to preserve your data is to export the data in each category in Palm Desktop to a seperate folder on your PC.
Create a new folder on your PC somewhere that is convenient. Name it something like Palm Desktop Data. Click on the link below and follow the instructions on that page for the export procedure.
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=28734
Make sure you select all for the range in the export window.
With the data saved in the folder you created, make a copy of that folder and save to a flash drive, cd-rw or external hard drive.
Anytime you make a change in Palm Desktop, export the data that was changed to that folder and save again to the external media.
With this process you can always import the data back into Palm Desktop anytime you have a problem with the data in Palm Desktop or if your computer/hard drive/device crashes.
One other issue that can cause the sync to stop is data corruption. I would suggest scnning the data on the Treo to see if it is corrupted.
There may be database corruption causing the issue. Click on the following link for the program called DbFixiT. This program has a trial version that you can download and install on your Palm OS device. The trial version will scan for database corruption and then report the corruption. You can then find the records causing the problem and fix them yourself or you can purchase the program and have it automatically fix the records.
http://www.pimlicosoftware.com/dbfixit.htm
To install the program, set all conduits to "do nothing" except quick install or install if using Palm desktop 6.2.
After you install the program on the handheld, run the scan and also scan for Blobs in the calendar.
After you clean-up the database on the handheld, set the conduits in hotsync to handheld overwrites desktop and perform a hotsync.
For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
http://kb.palm.com/wps/portal/kb/na/treo/755p/sprint/home/page_en.html
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.

Ical stopped syncing to treo 650 and other quirks

I have been using ical with the palm software on my treo 650, but now updates to my calendar aren't syncing.
I don't know of any changes that I've made, and I think I have checked all of the settings.
I don't know if this is related, but a couple of weeks ago my ipod suddenly said "not configured to this computer" or something like that, so I had to delete my entire library of music and re-import it.
Also, the settings for Safari had to be reconfigured.
Hmmm....does anybody have any ideas why these programs are acting like that?

Welcome to Apple Discussions.
There have been widespread, unexplained issues involving iSync and Palm devices, many of them involving an inability to synchronize at all with iCal. I've seen no specific solution for such problems.
While I never experienced a complete failure of calendar information to pass in one direction or the other, I did have a number of easily demonstrated, repeatable errors crop up with my Treo 600 and iSync under Mac OS X 10.4 and iSync 2, which had never occured under prior releases. For example, the Unfiled calendar would periodically pop up, even though I had selected another calendar - Palm devices - into which Palm-created calendar entries were to be transfered. And, I was never able to synchronize more than three of what were then twenty-seven automatically created birthdays, in the Address Book generated Birthdays calendar. And there were a host of other issues, including the home vs work address label problem, the inability to synchronize more than one address, data duplication within records and occasional record duplication, and other annoying shortcomings.
I simply got fed up, and updated to The Missing Sync for Palm OS version 5. What a difference! All of the quirky iSync behaviors are now a thing of the past. While it seems ridiculous that you would have to install an additional third-party application to synchronize correctly, my experience with iSync - particularly since the release of iSync 2 and Mac OS X 10.4 about six months ago - tells me that it is.
If you are interested in exploring this comprehensive, long-term solution, you can find more information about that application here:
http://www.markspace.com/missingsync_palmos.php

Problem with standby and Vista

Hi!
I've a problem with my X61 with the Turbo Memory and Vista x64: When I install the driver for Turbo Memory, I cannot resume from standby. The notebook does only a "normal" reboot.
Can anybody help me with this problem?
scw

well after a lengthy talk with many microsoft reps i found something. I was an updated version of this "WUDfrd.sys" file. But the problem was that i could not see a download link. but after a little while i convinced microsoft to give it to me. at first it looked like it had potential but after i restarted, every went down the plug hole. here is the link that i was talking about.
http://support.microsoft.com/kb/933607/en-us
problem still not solved and not looking to be solved for a long time by the looks of things.... NOT HAPPY JAN!!!

Sync Problem with Outlook and Blackberry Calendars

I am hoping someone has an "easy" solution to this problem.
I am using Desktop Sync (BIS) and synching it to my work Outlook 2007 mailbox.
Normally my calendar entries should sync to the Blackberry calendar associated with my work email address. Somehow, over the course of the past several days, some of my syncing was occuring with the the VZW Blackberry calendar. I didn't catch the problem in time and now I have work calendar entries correctly listed on my Blackberry, but in two different calendars.
I have since lost some of those entries originally created in Outlook. They are on the Blackberry, but on the wrong Calendar. When I sync with Desktop, the work entries on the VZW Calendar are not getting over to Outlook.
So the question is - is there a way to "move" the entries in one BB calendar, over to the other calendar? Thanks.

I would love to know the answer to this problem as well. I had the same problem even when I downgraded back to 5.0. It always worked fine before. Very Frustrating. To get around it clearing out all the settings on my handheld. I just have to click no every time it asks if I want to clear all databases on the phone before sync. It still syncs but doesn't change my settings. Annoying but works until they get this aggravation fixed.

Sync problems with music and podcasts

Hi there,
whenever I put new content to the music playlists or I got new podcasts loaded down by iTunes to sync them to the iPhone, the first sync process breaks down. The iPhone applies again after 10 seconds in a locked condition so I have to unlock it fisrt to keep on syncing.
I always have to sync twice to get a result. For example, to get new songs to the iPhone, first I have to put the songs on the iTunes playlist, then I have to sync with a disabled checkbox at "music" (the complete music will be erased at the iPhone) and then I have to sync again with an enabled checkbox (complete music will be sync comletely new at the iPhone).
It takes a lot of time to do the sync process in this way, can anybody help me? Am I doing something wrong?
Best regards

Another user recently reported a similar problem and it turned out to be an issue with email.
What I would do would be to turn off all syncing except for music and podcasts, reset your phone (perhaps even restore) and try the sync and see if it works. If it does at least you can narrow it down to something other than music and podcasts.

OS X Yosemite Pages sync problem between iPad and Macbook

I have updated my Macbook on OS X Yosemite. After update I getting problem in sync between iPad pages and iCloud.
Pages do not get sync automatically, temporary solution. I have to make sure that Macbook Pages connected to internet. After that I need to open my files on pages and have to do some fake changes like do some space. Pages again upload files from iPad and than I got updated files on my macbook.
iPad pages upload files correctly, I can confirm this because I do login in iCloud through web browser than I get files updated.
So this is the problem from macbook side (i.e. OS X Yosemite) not picking synced files from iCloud.

Hello livingthe66,
After reviewing your post, I have located an article that can help with Documents in the Cloud. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
iCloud: Troubleshooting Documents in the Cloud
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Problems with CS4 and Vista

Hi everyone,
Ok here is my problem im running windows vista "32Bit" on my laptop and im trying to instal photoshop CS4. I downloaded the trial from the adobe.com website and i have un zipped the file but when i click Setup.exe it just dont do anything. I have tryed deleting and re downloading but that didn't help any.
When i run the setup.exe it does show in command prompt but the CPU shows 0%
i have also tryed the things below:
Run as admin
Run with UAC turned off
reg delete HKLM\SOFTWARE\Microsoft\SQMClient\Windows\DisabledSessions /va /f
And i have tryed when all other apps are closed
Please help me with this as i want to see what photoshop is like on vista
P.S
My laptop meets the min requirments
PPS
If you need any more info please ask

Do you have any security tools running? Is there any other Adobe software on the system? Do you see the instance of Setup.exe running in task manager's process list and does it spawn instances of msiexec.exe? When you cycle through your active apps with Alt-Tab, do you see any possibly hidden windows?
Mylenium

HT4759 Contact sync problem Dell PC and Iphone 5c

My Dell laptop with windowns 7and IPhone 5c will no longer sync contacts. The calendar still syncs with no problem. Any suggestions? Thanks

You should ALWAYS maintain a backup.
The iphone will only sync to one computer at a time. When you sync to another it will delete the music/vids/apps/etc from the iphone first.
You can transfer itunes purchases. Without syncing : File>Transfer Purchases
This will transfer itunes purchases from the iphone to the computer. then you can sync ( erasing the iphone) and the purchases will be on the computer (itunes) so you can put them back on the iphone.
Backup, backup, backup

Windows 7 64-bit Palm TX bluetooth sync problem

hi
was able to bluetooth sync a few times but now i get the message: "unable to initiate hotsync operation because the port is in use by another application"
any ideas? have trie dre-installing, resetting to no avail
thanks,
richard
Post relates to: Tungsten T5

Hello rlarue, welcome to the HPalm Support Community.
If I could direct your attention to the topmost posts in this section? They have a grey background and are called "sticky posts" due to the fact they do not move downwards as new posts arrive, but "stick" to the top.
That said, you'll find two interesting posts! "How to sync a TX via Wifi" and "64 bit drivers are HERE".
(It always pays to look around a bit before posting a question)
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Why there isnt direct cable or Bluetooth sync link between iPod and iPhone?

I own both the iPod and the iPhone, both linked to iTunes. It is only possible to sync between the iPod to iTunes or between the iPhone to iTunes.
Why there is no possibility to directly link and sync between the iPod and iPhone ?
I will explain why this is bothering me so much. While on vacation I bought some songs from iTunes directly from my iPhone.
When i needed these songs on my iPod, it was inpossible, becouse my PC was left at home.
Because of this I am wondering don't you think irrational the impossibility to have a direct link and sync between the iPod and iPhone via white cable or via Bluetooth connections meant only for the link sync with PC ?
I mean even Nintendo DS and SONY PSP have this kind of sync links.
Message was edited by: Arkam Knight

Rationally this means that if I can download the same things on both my devices
form the same PC based iTunes software, there must be some way to link the
same both devices directly by cable or radio frequency.
Sorry, but I do not see the logic here at all. The statement simply means iTunes can connect with multiple devices. It does not say iPods (or iPhones) can connect with each other at all. It simply doesn't work that way. I can pull a trailer with my car. You can pull a trailer with your car. Therefore my trailer should be able to pull your trailer? I don't think so.
If you think it is important, try making the suggestion at http://www.apple.com/feedback

Audio sync problem - simultaneous HDMI and analog output

I'm currently running my audio out through my Geforce 460 via HDMI to my A/V receiver. I have a simultaneous stereo analog output running through my ASUS Xonar D2, using Pulseaudio & Amarok as the player (VLC-gstreamer backend).
I use the HDMI and A/V receiver to power my main stereo in my living room, but on occasion when I want music around the house, I use the analog line out to send audio to an FM transmitter.
The problem is, I'm running into audio sync problems. The audio starts out synchronised (at least to the naked ear) but within 20-30 seconds it is noticeably out of sync, with the analog audio (form my FM radio) running around a half second ahead of the HDMI output (my main speakers).
So - where to begin finding where the sync problem is? The receiver? Conversions between 44Khz and 48Khz?
Any help much appreciated - google-foo hasn't turned up anything obvious so far.

Yeah - that was my thought - a very difficult, and probably insoluble problem as it stands. I can't just mute one of the devices as that would defeat the purpose of having multi-room music! Fortunately it's not too noticeable usually, as you can't usually hear the main stereo and the FM radios at the same time, unless you're standing in the right part of the house
The analog splitter cable not really a goer, since running clean, crisp multi-channel HDMI with pass through when needed is the essential goal of the HTPC. So unless I was to switch inputs and or unplug cables...
What I will end out doing, in the absence of a software solution, is hooking the FM transmitter directly to my receiver. I was going to just use the headphone-out jack of the receiver to feed audio to the FM transmitter, but the stoopid receiver can't output audio to external speakers at the same time as the headphone is plugged. To overcome this, I'll probably run a headphone amp off the receiver's RCA outputs, into the FM transmitter. Like this one: http://headamp.com/portable_amps/ae2/, or this one: http://www.amazon.com/Rolls-HA43-Headph … B00102ZOQC
Last edited by sultanoswing (2013-11-13 06:15:11)

Itunes Sync problems - Itunes 8.2 + Vista

I am having problems syncing my ipod touch - it will sync with my library but it takes FOREVER to synch like 3-4 minutes a song.
Also it tends to make Itunes "Not Respond" time after time when i plug my ipod in an sync.
It works on an XP computer with 8.1. But I also had this problem last night where i had 8.1, so to solve the problem I updated and the problem still remains. THis is really frustrating.
I have tried everything deleting crash logs, deleting backups and deauthorize and authorize. Uninstall and reinstall, yet the problem still exists. I have also defragged the HDD and no joy.
I have to use my computer as all my music is on it.
Thanks help is appreciated

TheStigUK wrote:
nope its not a faulty usb cable tried again the problem still persists
EDIT: I just tried a nano (current gen) and it worked perfectly.
EDIT 2: I just tried with a 5th gen ipod click wheel one and it works perfectly.
Those iPods communicate with iTunes using the iPod service, the iPhone and iPod touch use the Apple Mobile Device Service.
Do you see the same issue when syncing the iPod in another user account or in selective startup mode? This article: http://support.apple.com/kb/HT2292 will walk you through putting the PC in to a selective startup mode.
You can also try updating and restoring the iPod touch as described here: http://support.apple.com/kb/HT1414
-Jason

Syncing problem with AppleTV and HP w/ Windows Vista

Vital Stats:
HP Media Center PC
Windows Vista Home Premium
iTunes 7.6.2.9
AppleTV 40GB Software Version 2.0.2 Wireless DHCP
I have been trying to sync my Apple TV with iTunes and keep getting the error:
The Apple TV "Downstairs Apple TV" is not responding.
Check that any firewall software running on this computer has been set to allow communication on port 3689.
I have done the obvious. I have checked the firewall software on my computer and have manually set the port as open and apparently when iTunes installs it also puts port information into the Windows Firewall. I have performed a factory reset on the Apple TV, reinstalled iTunes, checked my router and still it's a 'no go'.
Any suggestions?

Welcome to the  Discussion Forums.
Check your router for port forward/NAT rules that may involve ports 5353 and 3689, check that you haven't got the tv isolated at the router also.
Security software and file sharing applications may also be interfering with these ports take a look at any software on your PC that might be doing this.

Bluetooth Sync problems, Treo 755P and Vista

Similar Messages

Maybe you are looking for