Bluetooth Sync with Windows Vista - 64 bit

Recently found out that i have to use bluetooth to hot sync to my desktop PC.  It is a 64 bit Windows Vista.  I have the bluetooth device (USB), what do i need to do to the PALM device (T/X) to make sure the sync is appropriate?
Post relates to: Palm TX

Hi.. Welcome to the Palm forums.  First your computer has to have bluetooth compatibility,  if it is not built in then you will need to purchase a bluetooth dongle.  They are relatively cheap as I have seen them from $2 on up.  Next you would want to follow the following link as it has full instructions how to set it up as well as many other users that will be able to help answer your questions.  
http://forums.palm.com/palm/board/message?board.id=windows_hotsync&thread.id=17980&view=by_date_asce....  
 Also here is a knowledge base article that will help walk you thru the process.  
http://kb.palm.com/SRVS/nua/launchKB.asp?c=13950

Similar Messages

  • Palm Z22 and sync with Windows Vista 64-bit system

    I have  been trying to sync my Palm Z22 with a new laptop that is running the 64-bit Vista.  Based on some posts I had located, I ordered an IrDA Wireless Bridge to try to resolve the connection problem.  Something isn't working right and I can't figure out how to fix the problem.  The IrDA adapter is listing in the hardware option on the computer so it appears to have installed correctly.  The laptop has inconsistently recognized the USB connection when I plug it in however.  I can not seem to get the IrDA adapter to recognize my Z22.  I've got the Z22 set up to use the infrared to transfer information.  I have noted that the "beam" feature is ON.  I have looked at APPS and have observed that most of those options are "locked" and when I have clicked on "contacts" for example, it says it's a locked app and can not be beamed.  I don't know if that is part of the problem  or unrelated.  I also happened to observe that the Apps are listed as what to transfer with MODEM connection but I'm not sure why that is even showing as a connection option since I've never used the modem to connect.
    I can successfully use my Z22 to connect via USB cable to my Vista 32-bit computer system.  I'm not sure what I'm doing wrong in my attempts to use the adapter and connecting the Z22 with the new laptop. 
    I'm not sure what else to do and would very much appreciate some help with this.  Could someone PLEASE tell me what I may be doing wrong re: the setup connection between the adapter and Z22 or any other ideas re: what the problem may be concerning why I'm not yet being successful in getting this setup to work...? 
    Many thanks in advance for any assistance with this problem.
    Post relates to: Palm Z22

    Sorry for the delay in replying (bet you were hoping this worked, huh?) but it has taken some time to uninstall & reinstall the Palm software and make numerous attempts to configure the information to again try to sync the Z22 with the laptop.  I went back to amazon.com and located the device I'd purchased to confirm it would work with the 64-bit Vista.  Someone had posted their success in using the adapter for exactly what I need to do - sync my Z22 with a 64-bit Vista computer.  That consumer's posting noted: "The USB 1510 provided the solution. As soon as I plugged it into the USB port of the laptop, Vista went online, found the driver, and installed it. I was able to set up IR Hotsync as I would have on any laptop with a built-in IRDA port."
    I don't know what problem I'm having but have noted that my palm desktop software doesn't note what device (Z22) is to be connected and I can't find anything in the HotSync manager that allows me to specify that device.  For some reason, I had gotten an error message and it referenced a Treo connection which is odd since I don't have a Treo and I downloaded this Palm desktop from the Z22 site online...?  I did note my software on my Z22 is a v. 5 but when I checked various support sites online, it appears to indicate that version on my Z22 would be compatible with the Palm 6.2 version I just downloaded to my computer (and I can't find any information to indicate a newer software for my Z22 is available or how to do that either).
    So, I'm back to not being able to get my Z22 to be recognized by my computer via the infrared adapter.  I'm hoping that some of the added information I've been able to provide may give another clue of something else I can try before I have to give up and contact Amazon to return this device and either try to decide what other device may be an option.  I had checked with a local computer supply store here but they don't carry any type of device for this purpose so that's why I resorted to searching online for a solution to this problem.
    Thank you in advance for any assistance you may still be able to provide.  I really do appreciate your time with this matter.

  • Help, hotsync palm treo 755p to my laptop with windows vista 64 bit.

    I am computer unsavy and could use some help.  I have a palm treo 755p that previously synced with my old dell laptop.  That computer broke, and I got a new HP with windows vista 64 bit.  Previously, the dell was running windows xp.  I have bought some new software, which I have downloaded to my laptop, and am trying to sync my palm to the new computer so that I can download the program to the computer.  However, after installing the Palm Hotsync Manager and other software, and when I trying to sync, the computer does not seem to recognized my palm, and times out after a while stating "the connection between your handheld computer and the desktop could not be established.  Please check your setup and try again.
    Post relates to: Treo 755p (Sprint)

    Palm OS devices will only sync to 64bit through Bluetooth. We have a stickie concerning this. It's the third topic down under windows hotsync. Does your computer have Bluetooth?
    Post relates to: None
    Message Edited by legendeld on 11-19-2008 07:36 AM

  • I am trying to install itunes on my hp laptop with windows vista 64 bit. But when i install i get this error "An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32"version="8.0.50727.6195".publickeyTOken="1fc8b3 b9a1e18e3b".

    I am trying to install itunes on my hp laptop with windows vista 64 bit. But when i install i get this error   "An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32"version="8.0.50727.6195".publickeyTOken="1fc8b3 b9a1e18e3b".processorArchitecture="x86""

    Repair your Apple Application Support.
    Control Panel > Programs n Features > highlight AAS, click CHANGE the REPAIR

  • Please help. my computer is hp with windows vista 32 bit. I can't installe itunes . not the new one or and old one. i have try to uninstalle itunes and reinstall itunes again but it didn't work. please help

    please help. my pc is a hp with windows vista 32 bit. I can't install itunes 10,5. I have try to remove my old itunes and reinstall but it didn't help. I have install itunes 9.1.1 but the itunes library can't be read because it is on a new itunes. I hope someone can help. I'm lost.

        Deauthorize all of your computers and authorize the computers you use.
        http://support.apple.com/en-us/HT6283
      A new Mac comes with 90 days of free tech support from AppleCare.
      AppleCare: 1-800-275-2273
    Best.

  • Flash player 11.0.1.152 installation problem with Windows Vista 64-Bit

    Hello,
    I just can't get Flash Player to install on my computer with Windows Vista 64-Bit - doesnt matter if I try with Firefox, Opera or IE (I usually use Firefox).
    The download isn't a problem, but when I start the downloaded .exe, this file just disappears from my download folder and nothing happens - besides starting a process called install_flashplayer11x32_mssd_aih_3.exe, which does nothing. The usual installation popup never appears. After that I can't try starting the installation again, until disabling the process via task manager ("Only a single instance of this application may run"). Doesn't matter if I try the download and installation with or without "McAffe Security Plus" btw - same result.
    I never had such a problem before - Flash Player 10.3 was and is no problem to install and use.
    I have tried all the measures suggested in the troubleshooting section on the official site, including the advanced troubleshooting measures (uninstall old version, run as administrator, disabling software firewalls, disabling virus scanner etc.). Nothing helps.
    I don't got those problems with my laptop running Windows 7 - just my desktop computer with Vista 64-Bit.
    Any help would be greatly appreciated.

    Try using the installers from the links in http://forums.adobe.com/thread/909550
    P.S. topic moved to the Installation section of the forum.

  • Want to use Premiere Elements 4 or newer with Windows Vista 64 bit??

    We bought a new pc with Windows Vista 64 bit - but are now having problems using my Photoshop Elements6 and Premiere Elements 4 with our new pc.  it says on the box and on the web - that it is compatible with Vista - so why isn't it working for us?  Do i need to buy something else - and if so what?

    I am not sure completely about Photoshop Elements - but my main issue is with Premiere Elements....i need to find a program that will work so i can work with all my videos.  Trying to find out why it doesn't work or how to get it to work.
    Date: Mon, 8 Jun 2009 21:24:11 -0600
    From: [email protected]
    To: [email protected]
    Subject: want to use Premiere Elements 4 or newer with Windows Vista 64 bit??
    What problems with PSE?
    >

  • Tungsten t3 will not sync with Windows 7 64 bit using cradle sync

    Tungsten t3 will not sync with Windows 7 64 bit using cradle sync any suggestions?

    Try a low-tech solution.  Check the condition of the HotSync port connection on both the T3 and the cradle.
    Look for any possible corrosion, coating, or bent fingers in the cradle.  Sometimes a good cleaning with either Contact cleaner or isopropyl alcohol can work miracles!   (Use a q-tip swabbed in it, do not pour it onto the PDA).
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Hp pavilion dv6-1030us with windows vista 64 bit now upgraded to windows7 32 bit.

    hp pavilion dv6-1030us originally with windows vista 64 bit now upgraded to windows7 32 bit. mic is unable to send sound in skype after upgradation.
    This question was solved.
    View Solution.

    Hi,
    Try the following.
    First, uninstall Skype and when this has completed, restart the notebook.
    When windows has reloaded, download and reinstall the Chipset driver Here.
    When the installation has finished, restart the notebook again.
    Let windows fully load, then download the IDT Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp45001-45500/sp45044.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Re-insert the battery, plug in the AC Adapter and start the notebook.
    Let Windows fully load, then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, restart the notebook again.
    Reinstall Skype and see if the Mic now works Ok.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • ITunes freezes when syncing to my iPhone 4S with Windows Vista 32 bit.

    I have downloaded the newest version of iTunes after deleting the previous version.I tried connecting my iPhone 4S 16 gig, iPod Touch, and my iPhone 3GS and with each device, iTunes freezes and will not sync completely with any device. My operating system is Windows Vista, 32-bit

    I'm attaching the print screen of iTunes again (as referred in the original post).

  • Hotsyncing a palm centro using a bluetooth adapter and windows vista 64 bit

    Please help. I have read and followed all of the other suggestions on this forum and nothing has worked. 
    I have a palm treo.  When I try to hotsync using the bluetooth adapter, it gives me a message stating:
    "unable to connect,port is being used by another application".
    I have rebooted, soft reset, etc.    and still get the same message.  
    I do not know how to set up another port on the windows vista program.  That was one suggestion.
    I have selected both bluetooth and serial port under the hot sync manager.
    Nothing works.
    Any help is greatly appreciated.
    thanks 
    Post relates to: Centro (AT&T)

    Hello akashmedehrotra and welcome to the community.....
    Windows Vista 64 bit is only sync with a wireless connection.  Either Bluetooth or Infra Red.  The M515 does not have bluetooth, so you would have to purchase an IR Dongle and sync using Infra Red.  You won't be able to sync with the USB cable on your desktop.
    Colapop

  • Calendar syncing with Windows 7 64 bit

    I can sync all applications with Windows 7 64 bit via Bluetooth except calendar/datebook.  It synced one time but now gets hung up every time I try to resync.  Can anyone help me? 
    Post relates to: Treo 680 (Unlocked GSM)

    Hello Bogey,
     You might want to try setting the calendar/date book conduit to desktop overwrites handheld and then trying to sync again.  If the database on the Treo is damaged, this should force the database to be reloaded from the desktop.
    Hope that helps,
    Alan G

  • Is Flash Player 11.7.700.224 really compatable with Windows Vista 64-bit?

    I ask this question because under System Requirements, Window Vista 64-bit isn't listed.  I've inserted the link for the system requirements below...
    http://www.adobe.com/products/flashplayer/tech-specs.html
    I'm trying to figure why my Flash Player disappears from time to time when I'm watching a clip/video and then my Internet Explorer 9 typically stops working, it closes down, and then it opens up and asks me if I want to restore the browsing session.  I'm thinking that this has to do with having both Internet Explorer 9 32-bit and 64-bit.  I read online that Internet Explorer 9 has both and this is why I'm questioning whether Flash Player 11.7.700.224 might be contributing to this issue or was Window Vista 64-bit left off the system requirements in error?
    Thanks!

    Try using the installers from the links in http://forums.adobe.com/thread/909550
    P.S. topic moved to the Installation section of the forum.

  • Please Help! Problems with Windows Vista 32-bit on Boot Camp (Wireless/Etc)

    We recently purchased a new aluminum Mac Book (13 inch) with Leopard (10.5.4). I attempted to install Boot Camp and Windows Vista 32-bit. I can successfully alternate between both operating systems with no problems. However, I am having 2 problems:
    1) I cannot connect to wireless internet. No connections will even show up when I attempt to connect, its almost as if an adapter hasn't been installed.
    2) I cannot set up the trackpad to do right click.
    I've read articles everywhere and nothing has helped. Can anybody please help me??? Any support/advice is greatly appreciated. Thanks in advance!
    - Pierce

    dpierceNKC:
    Welcome to the Apple discussions.
    It appears that you may not have installed the boot camp drivers. Boot into Windows and insert your Leopard installation disk in the CD/DVD drive. This should automatically begin installation of the necessary drivers. Reboot the computer when instructed and all the hardware should work as designed.
    The right click is accomplished by placing two fingers on the trackpad and then depressing the trackpad button. This should also work after the drivers are installed as instructed above.
    Axel F.

  • Is flash player 11.3 compatible with Windows vista 64 bit?

    I don't have major issues with the video and sound (the flash player used to crash frequently but that seems to have been resolved). But I can't adjust the volume with the volume control wheel when I watch videos on firefox. When I check volume mixer the flash player is tied to the speaker, not firefox.
    The product description for flash player 11.3 seems to suggest that it will not support Windows Vista 64 bit. Should I revert back to an older version? What's the most straightforward way to do that? Is the Adobe team fairly close to finding a solution?
    Much thanks to anyone who provide some answers for people who aren't computer savvy - like me.

    Previously, with separate 32-bit and 64-bit installers, you could run the 64-bit installer on Vista, and it would work correctly.  However, it was not officially supported by Adobe.
    Now with the 11.3 combined installers, I do not know what it installs on Vista.  I do not have Vista available, so I cannot test it.  Can you tell me what files you have in
    C:\Windows\system32\macromed\flash ?
    C:\Windows\syswow64\macromed\flash ?

Maybe you are looking for