Bluetooth system in my car showing 'audio track'

When I pair my iPhone 4S with my car Bluetooth, the music is listed only as 'audio track'. Is there something I can do to display the track or is it just down to the Bluetooth system in my car?

I too have the Dual receiver XHD6425 and I am wondering if the BTM60 would work with my BB 8830.
Did you get the BTM60 working with your BB?
Nice receiver but seems like the support for the  Bluetooth is lacking.

Similar Messages

  • Multi track project  shows audio track 1 & not 2  need help!!!!

    hello everyone... Have a sequence in fcp 1 video track 2 audio tracks i right mouse click the sequence go to send to click on multi track project it sends to soundtrack pro but only track 1

    This would frustrate me in the beginning and sometimes it will come back to me. I'll blame that on the Pro tools I have installed. Make sure that device is enabled in controll panel, hardware. Disable the ones you don't use. I don't think AA will recognize usb or firewire hardware if that is what you have. Needs to be a card. I use the M-Audio Delta L1010. 8 inputs. I use 8 direct outs from my mixing board into the 8 inputs on the card. Sounds very good for the price.
    Good luck.
    Donnie

  • No audio track with AVCHD files (shot on Panasonic HMC-70)

    I've read quite a few treads and cannot figure this out.  I have a standalone version of Premiere CC 7.0.0 (342) installed in my computer lab at school.
    I tested the software with a creative cloud trial and AVCHD files worked fine. 
    This version does not show audio tracks in files dragged in from Media Browser (as suggested here: Audio and Video glitches | AVCHD footage)
    It also will not import/transcode audio with Prelude or Media Encoder.  Video works fine.
    I have FCPX and Compressor installed.  Both playback/transcode the file with no issue.  Is there a solution for Premiere/Prelude/Encoder?

    I tried renaming the folders, like all of them.
    Not working.
    The file path looks like this: Card:private/AVCHD (show package contents)/BDMV (show package contents)/STREAM/00000.MTS
    I would think there would be a native format in Premiere for popular Panasonic cameras. 

  • Do I Have to Upgrade to Premier in order to burn a slide show to CD or DVD if it has an audio track?

    I currently have PSE 8.  I have successfully created my first slide show that incorporates a purchased audio track downloaded from internet.  It plays just fine on my computer, but when I try to burn it to disc I only get the slide show without music.  This is for an anniversary, so I am on a deadline to fix this dilemma.  Can anyone help me?

    Do you know if it is Vista Home Premium?
    If yes or if you are not sure, look for Windows DVD Maker,
    On my Vista Home Premium laptop whe I click on "All Pprograms", within the list of programs I see "Windows DVD Maker" listed as a program.
    If you have this program then my suggestion is to use the PSE slide show editor to Output a file to your hard disk
    (use the
    -- the "Save to a File"  instead of the "Burn to a Disc"
    and
    -- the "Movie File - .wmv"
    and for slide size choose:
    DVD-NTSC if in USA
    or DVD-PAL if in Europe or other PAL TV country
    Save the wmv file in a hard drive folder where it will be convenient for you to reference for later use in the Windows DVD Maker program.
    Once this wmv file has been successfully created, you can play it back with Windows Media Player to verify that you like its contents.
    Your next step will be to use the Windows DVD Maker program to write the formats of movie files required for the TV DVD player playback to the DVD disc. I recommend closing Photoshop Elements and then open Windows DVD Maker from the Windows Start menu list.
    Windows DVD Maker is a "follow the instructions on the screen" program.
    However, one point of confusion is how to add the PSE created slide show to DVD Maker program.
    The answer is that you use that .wmv file (from the PSE slide show editor) -- it is now in a video format and is a "video". So you can follow the onscreen directions to add video to DVD Maker.
    Note 1: I recommended closing PSE before starting the Windows DVD Maker in order to conserve your PC system resources. It is probably not absolutely necessary.
    Note 2: You could also produce the DVD for TV playback by adding Adobe Premiere Elements to your computer.  However just for the purpose of making the DVD from your slideshow I anticipate that using Windows DVD Maker will be simpler and faster.
    Note 3: I recommend using a DVD-R disc. What brand of discs do you have?

  • I have garage band ver 10.0.2 and am trying to add effects to an audio track but i have no info button or track info under the track tab.  How do i get these things to show up on my program?

    I have garage band ver 10.0.2 and am trying to add effects to an audio track but i have no info button or track info under the track tab.  How do i get these things to show up on my program?

    In GarageBand 10.0.2 you can no longer add all kinds of effects freely; this GarageBand '11 feature has been discontinued. Pick one of the predefined patches that already has the effects you want.
    However, you can add effects from the predefined audio units.
    You'll see the predefined effects on the track, when you open the Smart Controls. To add audio units, click the button and enlarge the the smart controls pane by dragging the dividing line to the Track Area upwards.

  • I want to make a copy of slide show create from my own photographs and with a an audio track behind them. I have carefully followed the iDVD tutorials and burnt the result to a disc but image quality is very poor. What is wrong?

    I want to make a DVD of a slide-show with an audio track behind the photographs. I have carefully followed the iDVD video tutorials but the result is far from satisfactory. The quality of the images on the resulting DVD are blurred and indistict although the original photographs are of a very high quality. Where am I going wrong? Would I have better results from a different program than the inbuilt iDVD and if so so what programs have others found to be better? I should be grateful for some expert guidance.

    Hey Falcopebo,
    Thanks for using Apple Support Communities.
    Looks like you have image quality issues when using iDVD to burn.
    iDVD 7.0: Burned DVD has interlacing, pixelation, or image quality issues
    http://support.apple.com/kb/ht4078
    A standard DVD made by iDVD is made to the standard DVD resolution of 720 X 480, which is smaller than most HDTVs and monitors. When expanded to fit the entire screen or monitor, the image will distort slightly due to upscaling to fit the screen or monitor.
    Have a nice day,
    Mario

  • Can't connect to iTunes nor to car Bluetooth system

    Up through yesterday, my iPhone showed up in iTunes on my iMac, but no longer. Also, it automatically connected to my Toyota Camry Bluetooth system...but no longer. (I just upgraded to iOS 6.1)

    try holding the sleep and home button at the same time until you see the apple logo. then make sure you're logged in your apple ID. if it still doesn't. you may need to restore your ipod. hope this helps

  • Audio tracks no longer showing up on timeline

    Hi,
    I've been using Premier Pro for several months now with limited problems but just recently I'm no longer able to get audio tracks to show up on the timeline of my projects. When I go into older projects and import new AVIs, the audio won't show up. If I select an older AVI that was imported before this happened, I can get the audio to show up.
    This only seems to happen with AVI files where audio is compressed with mp3. AVIs with WAV audio are working. This is still odd though, b/c the mp3 AVIs were working fine several weeks ago.
    thanks in advance!

    I should mention that I've installed some codecs in the last few weeks and perhaps this has caused Premier to stop importing audio tracks from AVIs? Is this a known issue?

  • Audio tracks don't show up properly on sequence when enlarging timeline

    On the timeline, audio tracks don't show up properly, by either appearing out of sync or by repeating itself when I enlarge it to work on it. Other sequences in the project work fine, and I've tried coping a pasting this sequence or parts of it to a new one and I still have the problem. Attached below is an example of the problem. This sequence is about 40 minutes long.  Thanks for any help. Lucian

    Is it the same if you uncheck the rectified audio box?

  • Audio Tracks not showing in itunes.

    Dear All
    After transferring audio tracks to itunes library I am manually dragging them to my ipod shuffle and the songs are shown in the shuffle but when I am deleting the tracks from the itunes library then nothing is shown in the ipod shuffle folder of itunes but the settings tab shows the amount of space used and the songs are present in the ipod as I can play them. I am not able to manage or change the sequence of song in shuffle since it is not shown in the device folder of itunes.How will I be able to see the list of songs presently transferred in my ipod shuffle if I delete them from the itunes library ?
    Help please.
    Thank you.

    Deba007 wrote:
    Actually I dont keep my audio tracks in my Hard Drive but its in DVDs and CDs. Therefore I import them into the itunes library and transfer them to shuffle manually and then delete them from the itunes library.
    When I am deleting them from my itunes library I cannot see them in the shuffle folder though I can play all the songs in ipod shuffle.This problem does not happen in my Ipod classic 160GB.
    Help Please.
    Shuffle works differently from the "Ipod classic 160GB". There is NO additional help for this issue.
    Message was edited by: 0Ari0

  • I Recorded 4 audio tracks, could hear it in the headphones while recording. Meters show input. No playback sound. Advise.

    I Recorded 4 audio tracks, could hear it in the headphones while recording. Meters show input. No playback sound. Please Advise.

    How can anyone advise on such a cryptic post, all we can do is guess.
    Which version of Logic, what audio hardware are you using?
    Have you read the manual?

  • My Iphone 6 (8.1.2) is very slow and sluggish to response whenever it is connected any bluetooth devices ex. my car audio or bluetooth headsets

    My Iphone 6 (8.1.2) is very slow and sluggish to response whenever it is connected any bluetooth devices ex. my car audio or bluetooth headsets
    The moment I disconnect the bluetooth , the phone turns normal again. This happens when i awaken the phone and try to access the home screen, this takes almost 4 to 5 seconds at times.
    Is anyone facing similar issues, Please advice

    My Iphone 6 (8.1.2) is very slow and sluggish to response whenever it is connected any bluetooth devices ex. my car audio or bluetooth headsets
    The moment I disconnect the bluetooth , the phone turns normal again. This happens when i awaken the phone and try to access the home screen, this takes almost 4 to 5 seconds at times.
    Is anyone facing similar issues, Please advice

  • Audio not showing up in audio track editor - Logic X

    Logic XI was doing everything right and then my audio quit showing up in the audio track editor. It shows in the Audio File Editor, but when I click over, having already activated "flex" nothing shows up, just the empty grid. The project is pretty big. Is my computer just refusing to do any more flex edits?
    I'm working in OSX 10.9.5 on a 2009 iMac.
    Thanks for the help.

    You certainly have a problem if you are seeing a vertical piano keyboard in the audio editor window...
    You only see the vertical piano keyboard in the Piano Roll (Midi) window....
    So are you talking about editing audio or midi data.....?
    If it's midi... then click the link icon so its yellow...on a brown background.. to link the midi region with the Piano Roll screen....

  • Timeline shows no name of audio tracks

    I just switched from Premiere Elements to Pro and have some problems ...
    One of the biggest: In the Timeleline Pro isn't showing any names on the audio tracks!
    Meaning in the video track I see something like "example.mp4 [V]" and in the corresponding audio track I see just the "fx" icon.
    I expanded view and zoom and tracks and everything, unlocked the audio-video-nesting - nevertheless there is no name in the audio tracks to be seen!
    Because of this I get confusued which audio track belong to which video, so it's really important for me to get this names in the Timeline!
    Thanks in advance!

    WON-DER-FUL !!!!!
    Thanks a thousand time – as easy as it is if you know it, as much I couldn't find it
    Thanks again, you helped me a lot with that!!!

  • IOS 8.1 will not let me make calls via car Bluetooth system , i can only receive calls , making calls i have to select handsfree manually each time , no problem before , 2013 mitsubishi outlander

    iOS 8.1 will not let me make calls via car Bluetooth system , i can only receive calls , making calls i have to select handsfree manually each time ,  i had no problem before iOS 8 , 2013 mitsubishi outlander , I'm based in South Africa and support of any type really ***** here , would really appreciate any help , i have unpaired , deleted , repaired and so forth , nothing works

    Hi
    i have a honda crv, 9 month old. I have before an iphone 5 s, it was perfect./ios7.1.2/
    after soft update 8.0 disconected from hands free system, every 5-6 second, over 2-3 second back into connection automatically.
    After i changed into iphone 6 / only 8.X/
    It was an update. i think 8.0.2 for this problem, that this update was bad.
    This problem is by lexus, VW, and another 2 Honda CRV, 1 civic / 2024 /
    ONLY 8.0 or higher soft
    this time 8.1.2
    Today was 1 minutes call, by calling was 4-5 disconnect episodes
    i probe with another iphone 5s/7.1.2/, motorola x 2014, galaxy s5 - there are perfectly
    IT'S a  SOFTWARE PROBLEM!!!!

Maybe you are looking for