Bluetooth trouble when conect to my mouse

Hi ,
i have a G510 Model 20238 by using win 7 (64 bit) an i can`t connect to my microsoft sculpt comfort mouse.
The bloutooth driver are still installed. What can i do?
Sorry for my stumbling english because i`m from germany
Greeting from Berlin
Fairy1962

Run the fixit and then follow steps from below link from below link:
http://go.microsoft.com/?linkid=9740816
If this does not resolve the issue then try below methods:
1. Remove and then reinstall the device:
Click the Start button, click Control Panel, click Hardware and Sound, and then click Bluetooth Devices.
Select the device that's not working, and then click Remove.
Click Add, press the reset button on the device (or make it discoverable), select the My device is set up and ready to be found check box, and then click Next.
If the device is not found, repeat the previous step. When the device is found, select it, and then click Next.
Follow the rest of the instructions in the wizard.
2. Make sure the device is turned on and that the batteries don't need to be replaced.
3. Make sure the Bluetooth adapter for your computer is attached and turned on, and that the device is turned on and discoverable.
4. Make sure that you installed the device using the correct program. If not, reinstall the device.
To do so, follow these steps:
Connect a wired keyboard or mouse to your computer.
Click the Start button, click Control Panel, click Hardware and Sound, and then click Bluetooth Devices. 
Click Add.
5. The device might be out of range of your computer, or too close. Try moving it closer or a little farther from your computer.
If these above methods do not resolve the issue then re-install Sculpt Comfort Mouse drivers from below link:
http://download.microsoft.com/download/F/4/7/F470FE38-7D5E-4BE2-BCA1-E333C28027A0/MouseKeyboardCente...

Similar Messages

  • Bluetooth Trouble With Mouse and Keyboard

    Symptoms of problem: Message indicating that mouse is not connected. Mouse becomes inoperable.
    Related clues:
    After selecting "Browse Device" from the Menu Bar, Bluetooth icon, drop-down menu, the mouse is listed in the Browse Device window...the keyboard is not listed. The message "Searching for Devices - 0 Found", followed by "Found - 0 Devices" appears every few seconds.
    When the Bluetooth icon in the System Preferences is selected, both the mouse and the keyboard are shown to be - On, Discoverable, Paired, and Connected.
    There would seen to be nothing interfering with the signal, although I did enable a new 1.9 GHz wireless phone system just prior to experiencing the Mouse trouble.
    ???

    So the first thing that I would do is disable the phone system and see if the issue goes away. If it does you most likely have your answer to the cause. However, BT is supposed to be confined to the license-free ISM band at 2.402-2.480 GHz which would seem to be well away from the phone's frequency.
    Dah•veed

  • How not allow music start when conect the iphone5 to other device by using Bluetooth?

    How not allow music start when conect the iphone5 to other device by using Bluetooth?

    Hi Ralph,
    Ty for answer. I connect my iPhone5 to my car audio system by Bluetooth. I can listen sounds from any app installed on my iPhone. The music app starts immediatly, without any command, when the connection via Bluetooth is done. It disturbs me because I want to hear sound from another application. At this moment I do not want to listen to music. I stop the music but it return again and again every time the other app stop momentarily to talk. (This is a navigation app)
    I would like to know how to configure my iPhone5 to avoid this.
    Kind regards
    Edilson

  • Trouble with on the scene in fireworks in CS3, when the leader of mouse this in the escenario the leader done slow

    hello, im a designer and have a problem with fireworks cs3, in 1 week ago bought a new laptop and install the suite cs3 but begin use firework and when the leader of mouse this in the escenario the leader se done slow and only happen in the escenario, please help me

    Hello,
    Is your operating system Windows Vista?
    The bitmap tools do not work well with the transparent Aero interface. Are these the tools that are slow?
    If yes, then it is possible to turn off the Aero interface for Fireworks and the tools will not be slow. Post back if this is the problem.

  • Mac Mini crashes when connected to USB mouse!

    This problem just happened all of the sudden--I came into my office a few days ago and there was the multi-lingual screen of death telling me I needed to restart my computer. Tried numerous times, no success--same message.
    Took Mac Mini to Genius Bar--they said it checked out just fine.
    Brought it home, plugged everything in--same problem!
    Started eliminating USB and Firewire items that I was connecting to it. Narrowed it down to my Verbatim USB wireless mouse. When I disconnected it, the computer booted fine. However, can't navigate anywhere w/o a mouse, so I figured my solution was to just go buy a wired USB mouse.
    Bought wired USB mouse. Same crashes! My computer will not boot with any USB mouse connected and when I connect a mouse after it is booted, it crashes the moment the mouse is connected.
    Even if there is something I could install or uninstall, I can't do it because I have no navigation w/o a mouse!
    Error messages on screen of death have to do with "kernels" and what not--again, if it was something I could replace/reinstall that would be great, but how can I do anything w/o a mouse?
    Please help!!!
    Thanks,
    Phil

    I have three 2008 model Mac minis, each with verbatim mice. Luckily one hasn't been upgraded to 10.6.8 because I'd be without a working desktop machine.
    The 2010 Mac mini doesn't have this problem.
    So far I've tried four different USB mice and all of them lock up the machine, even in safe mode.
    I can't afford to go and buy three apple Bluetooth mice - it's the only way I can use these machines.
    I hate downgrading machines, so I'm hoping apple supplies a patch soon.

  • When I move my mouse Itunes stops playing. This was happening before I installed latest version. I have installed latest version three times. First and install, then as a repair, and third time I unistalled Itunes and reinstalled i.

    when I move my mouse Itunes stops playing music. Sometimes this happens immediatly and sometime it take 10 to 15 sec. I tried playing Itunes and then tabing another program but same result. If I click on play and do not move mouse Itunes works as usual.. This was happening before I installed latest version. I have installed latest version three times. First and install, then as a repair, and third time I unistalled Itunes and reinstalled i.

    when I move my mouse Itunes stops playing music. Sometimes this happens immediatly and sometime it take 10 to 15 sec.
    At various stages over the years, mouse-related iTunes trouble has been associated with driver conflicts. So it might be worth following up on that possibility.
    Head to the drivers and downloads page for your model of PC, and check to make sure you're not behind on any chipset and input-device-related driver updates. (And while there, just in case, also check to make sure your BIOS, sound-card/integrated audio, and video-card/display-adaptors are up to date.)
    If you're behind on anything, and you update, does that help with the mouse-related iTunes issues?

  • Bluetooth of when g4 running 10.5.6 boots

    hi Iam new to macs but have a blutooth mighty mouse, all was working fine for a week, when i boot my mac the mouse was working fine, but now when it boots the mouse doesnt work, i plug my usb mouse in and attempt to send a file to my phone and i get a message box saying "bluetooth is turned of would you like to turn it on", i turn it on and all works fine until its rebooted, i can find anything in preferances, is there a keyboard shortcut to turn the bluetooth on? or is there a fix for this prob.
    Thanks in advance for your help

    Hello m:
    Welcome to Apple discussions.
    Try trashing the preference file (com.apple.bluetooth.plist) and restarting.
    I would also reset the PRAM:
    http://support.apple.com/kb/HT1379
    Barry

  • I want to connect my iphone to my computer using bluetooth but when I try to it says Device driver software not found

    How do I set up portable hotspot and also when conecting bluetooth to my PC it says device driver not found how do I sort this?

    Unless you are trying to Tether, you can't pair an iPhone with any computer, by Bluetooth. File transfer, by Bluetooth, has never been supported on an iOS device.

  • My screen got bigger and when I move the mouse, the screen moves as well. What can I do about this?

    My screen got bigger and when I move the mouse, the screen moves as well. What can I do about this?

    Actually as Roam said, you can keypress, Option + command + 8
    But i think wat you asking is that you dont want the screen mving when you move the mouse. Right?
    For that you can, goto, System Preference -> Accessibility -> Zoom -> More Options...
    Once you click more option, you'll get a window. Look at the bottom of the window for 3 options with bullet buttons. SELECT "ONLY WHEN THE POINTER REACHES AN EDGE" and click "DONE"
    Viola!!! You're troubl's are over!!!

  • Trouble when pages exceed 7MB

    I have trouble when i create a pages document in my Mac. Sometimes (most of the time) it makes forever to load, and then again if i move my mouse, it stalls again. I have made some documents with a lot of hard work and i cannot duplicate the due to that problem. The only thing that i can do is print them and send multiple "error reports" to apple. Inform me if any of you have the same problem.
    Thanks

    If the document size is large, we may assume that the available RAM is not sufficient so Pages is forced to swap between "physical memory" (the RAM chips) and "virtual memory" which is in fact an area in your HD.
    We are all supposed to know that "virtual memory" is many times slower than true RAM.
    Yvan KOENIG (from FRANCE lundi 25 mai 2009 19:33:31)

  • How do I pair a bluetooth headset when my MAC doesn't recognize it? The hedset work properly because they are paired with my iPhone. The headset is not an Apple product. It'd 3rd party.

    How do I pair a bluetooth headset when my MAC doesn't recognize it? The hedset work properly because they are paired with my iPhone. The headset is not an Apple product. It'd 3rd party.

    Ask the headset manufacturer.
    Barry

  • Hi! I'm just having a little trouble when it comes to battery charging of my iPhone 5 with its new iOS 7! It doesn't indicates that the battery is fully charge unlike the old version of iOS! They said it should be pulsating but it's not

    Hi! I'm just having a little trouble when it comes to battery charging of my iPhone 5 with its new iOS 7! It doesn't indicates that the battery is fully charge unlike the old version of iOS! I already read some reviews and discussion about this. They said that the lightning bolt should pulsate when charging but it's not!

    Thanks for the replies. It took a while not hearing anything so thought I was alone. I have done many of the suggestions already. The key here is that it occurs on both phones with apps, and phones still packaged in a box.
    A Genius Bar supervisor also checked his Verizon data usage log and found the same 6 hour incremental use. Suprisingly, he did not express much intrigue over that. Maybe he did, but did not show it.
    I think the 6 hour incremental usage is the main issue here. I spoke with Verizon (again) and they confirmed that all they do is log exactly when the phone connected to the tower and used data. The time it records is when the usage started. I also found out that the time recorded is GMT.
    What is using data, unsolicited, every 6 hours?
    Why does it change?
    Why does it only happen on the iPhone 5 series and not the 4?
    Since no one from Apple seems to be chiming in on this, and I have not received the promised calls from Apple tech support that the Genius Bar staff said I was suppose to receive, it is starting to feel like something is being swept under the rug.
    I woke up the other day with another thought ... What application would use such large amounts of data? Well ... music, video, sound and pictures of course. Well ... what would someone set automatically that is of any use to them? hmmm ... video, pictures, sound. Is the iPhone 5 succeptible to snooping? Can an app be buried in the IOS that automatically turns on video and sound recording, and send it somewhere ... every 6 hours? Chilling. I noted that the smallest data usage is during the night when nothing is going on, then it peaks during the day. The Genius Bar tech and I looked at each other when I drew this sine wave graph on the log print outs during an appointment ...

  • I am having troubles, when I open LR I get a message that there is an error and it will try to fix the error next time it opens, but I get the error next time it opens, and this is going on and on where I can not use LR, any suggestions?

    I am having troubles, when I open LR I get a message that there is an error and it will try to fix the error next time it opens. LR closes on it's own, I reopen it and get that same message next time it opens, and this is going on and on where I can not use LR, any suggestions? If I click on a different set of photos in the libary before I get that message I might or might not get the message next time it oipens, but I still can not get to those photos, and it is not just one or two but most of my photos. HELP!!!!
    Thanks
    Carol

    The first thing I would suggest is for you to go to the folder containing your catalog, using your system browser. There will be a folder that has the extension .lrdata. Delete that folder, and then try to start Lightroom. If that doesn't work, replace your catalog with your most recent backup.

  • I used to open many tabs in the same page and i move from one to other by mouse but since3 two days the tabs open in the same page normaly but i can't move from one to other when i clik with mouse on any tab it don't open/ do u have any solve for this?

    i used to open many tabs in the same page and i move from one to other by mouse but since3 two days the tabs open in the same page normaly but i can't move from one to other when i clik with mouse on any tab it don't open/ do u have any solve for this

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • I use my 7th gen ipod on bluetooth and when the battery dies while on bluetooth it wont turn on or charge and the computer doesnt find it.  This is my 2nd nano in just over a month.  The first one had the same problem.  how can i fix this?

    I have the latest ipod nano (7th gen, 16gb) and I use it mostly on bluetooth. When the battery dies during use with the Bluetooth it doesn't take a charge, the battery doesn't turn on and of course the computer doesn't even acknowledge that it's plugged in. This is my second nano in just over a month, the same thing happen with the first one. I just want to know if their is a way to fix this so I don't have to keep sending it in? Or maybe pay the difference to upgrade to a touch?

    If the battery has been completely depleted on the Nano (not really a good idea) then it is going to take 15 to 30 minutes before your computer can see it. Same thing will happen with an iPod Touch.

Maybe you are looking for