Bluetooth turns down ring volume

I have both iPhone 3GS & iPhone 4s both when connected to my Skoda yeti Bluetooth work fine. When I leave the car the ring volume is set to 0. I recently hired a Seat Leon which has the same Volkswagen Bluetooth system. Both phones worked fine and ring volume was returned to the level before.
Any ideas?

Hi there I've been having same problems only after updating to ios5 had phone replaced from apple was fine till the dreaded update according to the so called genius I spoke to it wasn't a phone or software problem wich is totally wrong in my eyes hope this helps

Similar Messages

Can I remotely turn the ringer volume on so I can find my phone?

Can I remotely turn the ringer volume back on, so I can find my phone using the "find my phone" ap? It's nearby, but I don't know where. I think I have an iphone 4???

Thank you so much. I did that, and didn't hear it, but when you said it will work even if the ringer is turned off, I did it again, and went outside, and it had fallen out of my bag near my car. I was pretty sure it was in the house because I had already looked outside, but obviously, not where it was.
Thank you again!

Turn down the volume of built-in speaker before playing music

So I was wondering if there was any way to turn down the volume of the built in speaker prior to playing music/video. I imagine that if I'm REALLY quick and pause the action, I can turn it down, but I'd rather not have to race against time.
The context for this, is the desire to show someone else video on the iPhone (say a National Geographic video podcast) without the audio blasting forth.
Any ideas?

So you're saying the phone doesn't remember the previous setting you had it at and jumps up or something...?
..or you want to hit play and have it not play so you can adjust the volume first...sorry can't help if that's the case. It kind of doesn't make sense from a UI perspective, when I press play or start a video I want it to play....different strokes for different folks tho

How do I turn down the volume of the Media Browser in Audition?

See subject above/

I'm using an RME Multiface II and mixing in 5.1, but the point is that the project is very quiet, and many of my samples are loud. If I turn down the whole thing, I can't hear the soft project over the loud samples that I'm trying to add. (When I'm working in Acid or Reaper with loop-based stuff, I can simply turn down a volume slider in the media browser equivalent.)
-SCP

Inspire s2 wireless turns down the volume by itself.

Hey. I bought my Inspire about a year ago and it worked fine.
Then suddenly when i connected it to my laptop it turns the volume down. I can turn it up again but it just keeps muting.
First i thought it was my laptop settings and i'm not a geniuos with computers.
But then i connected the speakers with my iPod touch and it still turns down the volume totally random. It does it approx every 5 minutes.
Can anyone tell what the devil the matter is?
(Sorry for my english, i'm danish :P )?

Hi,
Sorry but this doesn't sound right, I suppose something's wrong with the speakers. You might want to contact Customer Support for assistance.

Does turning down volume in app always have to turn down ringer?

I have missed several calls because I turn down apps and it make the ringer equally as quiet. I have the same problem on my iPad. Any fixes?

When installing Vista or Windows 7, I always advice people to remove their OS X drive so that Windows doesn't touch, tag, or know about OS X (also makes the install easier).
Not sure why, but have you booted from another hard drive and run Disk WARRIOR - or at least Apple DU and tried doing disk repair? not sure it would help. Then zap PRAM and see if that changes this at all.

Application that turns on ringer volume

My wife and I normally keep our iPhones on vibrate. I am looking for an application that will turn my wife's ringer volume on when a call from a favorite comes in. So, for example, if I am listed on her favorites instead of it vibrating when I call it would ring. Best I can tell this type of functionality is not available with the "Do Not Disturb" addition. Any ideas?

Follow basic troubleshooting found in your user Guide for your phone.
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
Reset, restore, Service.
http://support.apple.com/kb/HT1430
http://support.apple.com/kb/HT1414

When I receive a call it won't allow me to hear the person on the other line unless I put my headphones in or use the speaker function. And when I turn the ringer volume up/down it is in maximum

when i recevie a call it won`t allow me to hear normally

There is nothing to input because your licensing system isn't functional. Reinstall the software properly using the full suite installer, not some obscure single app installers or whatever you mean by "backup".
Download CS3 products
Mylenium

I have an I phone 4 and since I upgrade to the lastest ios 6.1.3 , my volume slider is missing. The sound works when but I can't mute or turn up or turn down the volume. I've tried a hard reset , reboot, blowing air in the dock and earrplug jack. :-(

I tried almost evrything to restore my volume slider( + & - ). My phone rings, plays music and every other sound but I can't mute or put the volume up r down with the side buttons.. My volume slider bar is missing. This is only simce I upgraded to iso 6.1.3 .. What's with that?? I figured out how to manually mute the phone through (General, Accessibitily) by muting the bell for sound and unmuting the bell for silent mode. But what a freaken pain, when you have to take all those extra steps to turn your volume up or down or mute your Iphone??
We have no Apple Store here so no luck to bring it in to get looked at.. Please , does anyone out there know what else I coold do???
Cheers

Does it work with headphones plugged in? That is typically the culprit, the device mistakenly believes that a pair of headphones are plugged in.

Battery saver automatically turns down alarm volume

When my phone's battery (Droid RAZR M) got down to 30%, a notification asked if I wanted to go into battery saver mode. I then set my phone to automatically go into battery saver mode at 30%. Twice now I have slept through my alarms because the alarm volume was turned way down. I'm assuming the battery saver is doing this, because that's the only thing I've changed on my phone since it's happened. I can't figure out how to disable the battery saver mode. I can't find it anywhere on my phone, and am wondering if someone could tell me where it is. I know there are multiple battery saver apps, but I have no idea which one it is because I can't find a battery saver anywhere on my phone. I'm assuming whatever app it is came with the phone.
Thanks!
Tyler

I know the alarm is an important function to rely on thans2316. You mentioned you set the phone for battery saver mode at 30%. This is a function built into the device. Have you tried adjusting the percentage? How about keeping the device on the charger at night, which would prevent it from getting to 30%?
JonathanK_VZW
VZWSupport
Follow Us on Twitter@VZWSupport

TS2634 My EarPods keep randomly turning down the volume when I'm listening to music?!?!? does anyone know how I can fix this, or will I have to invest in a new pair?

this is so annoying! I will have my volume at the usual 6, and I'll listen to music and i won't touch anything but it turns the volume down until eventually there is no sound. this does not occur without the EarPods.

If still in warranty return to Apple for evaluation
Worth trying a restore of iPhone to eliminate a software issue ...and
Do they work in other devices

Even when I turn down the volume in a clip to zero in imovie '11, but it still plays the audio! I can't get it to stop playing the audio. Any help?

this problem with audio began yesterday but before that it was fine! this is a brand new macbook pro...not even a week old!

Does it work with headphones plugged in? That is typically the culprit, the device mistakenly believes that a pair of headphones are plugged in.

Tried reset, taking off case, no Bluetooth but sound effects keeps appearing in middle of screen. If I turn down volume it goes away but then comes back. Sometimes immediately. Sometimes in 5 minutes. Am not touching anything on side of iPad at the time

Cannot get sound effects icon to stop coming on. When I turn down the volume, the icon goes off briefly and then it comes back on at full volume and stays in the middle of the screen, until I click the volume down again. Doesn't help to reset, the case is not on and it still does this. Most annoying.

Tried any basic troubleshooting steps?
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered.

Do you have any ideas on how I may resume my TV volume to full capability after disconnecting the HDMI cable and Macbook Pro to watch DVD's somehow my tv volume got turned down and I can't get it to restore fully. Any constructive ideas?

I used the HDMI cable from my Macbook Pro to my Panasonic TV to watch DVD's but I had no sound, so I used the community suggestion in going to system preferences>sound etc. followed the instructions and got great sound in fact very loud to my TV so I turned down the volume from my TV remote control. After watching the DVD's I disconnected the HDMI from my TV and realized for some reason my TV volume now is not returning to it's full volume even though I've tried to turn it to it's maximum. Any constructive assistance is truly appreciated. Thanks.

Hey, it's a simple fix that should give most people what they want until there is full VZW support: the ability to use their card with the VZAM software. I didn't see anyone else offering that suggestion... If you don't want to use it, you don't have to.
At the very least, this does seem to prove the theory that this is an issue with the 32/64bit compatability that some have refuted.

Took phone update and now can't turn down volume all the way?

I took the latest phone system software update, and now when I turn down the volume (using the volume button on the side) the lowest it will go is vibrate instead of silent. This is annoying, because I sometimes like to turn it all the way down in meetings or when I sleep at night, but it vibrates on incoming calls or corporate e-mail notifications.
Why did you guys do away with the fully-minimized volume choice?
The Motorola Droid (Droid 1, I suppose), under the original software load, allowed you to turn down volume (in some number of steps), down to Vibrate, and then finally all the way Off. The only sound it would make would be if you set an alarm clock.
With the new load, turning it down only goes to vibrate, and not silent.
The "Silent Mode" available when pressing the power button should be more appropriately named "Vibrate Mode." It appears that there is no longer a true "silent" mode under the Droid O/S.
I looked at a number of marketplace apps, but they all seem to be based on a timer setting, i.e. set a time frame that you don't want any sounds.
Why did Verizon (or is it Google?) have to break something that didn't need fixing?

It's a known issue and has been discussed numerous times. If you need quick access, you can get beautiful silent from the market for free which will allow you have a widget on your homescreen for silent mode.

Bluetooth turns down ring volume

Similar Messages

Maybe you are looking for