Bluetooth update does not finishes

I have some problems with my bluetooth, it Works with paired devices,  but i cant add any more, the system tray icon has dissapeared, if i try to install the lates update through Lenovo System Update it didnt finishes an reports a bttray.exe error and doesnt installs, I tried to run it manually but it shows an X sign on the Windows with no text message and doesnt finish the installation.

Try to uninstall the bluetooth driver and application from your laptop, reboot and reinstall it manually or through System Update.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

Similar Messages

  • Ipod update does not finish, itunes wont recognise ipod!

    i recently installed the latest itunes. BIG MISTAKE!! when i connect my ipod and open itunes, it says "determining gapless playback information" and starts going through all the songs on my ipod (a very long process). so i sit this out, and it wants to update my ipod software. fair enough. so i sit this out. it 'finishes' and then just says "updating ipod" and looks like something is happening, but it isnt!! i left my computer and went out and came back in the morning and it was still going!
    ps. my ipod does not appear on itunes as well
    what can i do?

    so i sit this out. it 'finishes' and then just says "updating ipod" and looks like something is happening, but it isnt!! i left my computer and went out and came back in the morning and it was still going!
    ps. my ipod does not appear on itunes as well
    with those symptoms, it might be worth checking on the possibility from this document:
    iTunes for Windows: iTunes 7 doesn't recognize iPod

  • Update does not finish installing

    I am trying to download the update for the 3rd time and it gets to the installing spot and just spins and spins. I try to click stop and it doesnt and I then have to force close my computer. What is causing this to stop?

    Hi Carolfromme,
    Thanks for visiting Apple Support Communities.
    If iTunes is not installing, try the steps described in this article:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Best,
    Jeremy

  • Syncronizing my 3gs with itunes the sync does not finish because itunes allways crash and stuck i made some troubleshoots like reinstall again but nothing and my itunes is update and the system is windows vista home premium.Please help me...

    Syncronizing my 3gs with itunes the sync does not finish because itunes always crash and stuck and i can not sync my device, i dont no whats wrong because the itunes even can not  acess itunes store, still loading waiting for itunes store and nothing.I tryed reinstall itunes but just waste of time.
    My itunes is update, iphone 3gs 4.3.4, system is windows vista home premium.
    Please help me.

    I also have the Mcaffe security centre so on the face of it we have very similar situations and I had not problems.
    You asked what I meant about saving the installer on your PC.
    When you go to the iTunes download page:
    http://www.apple.com/itunes/download/
    And click on download, you should be offered the choice of running the installer or saving it. You need to click on save and then choose a folder on you PC where you want it saved. But I think you already did that.
    After the installer file - iTunessetup.exe - is save on your computer, you double click on it to run it.
    It's very odd that the installer fails at different stages. usually when the installation fails, it is at a specific stage and usually generates an error message.
    I am afraid I am mystified. Have you had any other problems with your PC which might suggest a general problem not specific to iTunes?
    The only other suggestion I have is to download a fresh copy of the installer - in case it got corrupted. You could also try using "run as administrator" to run the installer. It should be an option if you right click on the installer file.
    The other thing it might be worth trying is to install it from another account, but you would need to create another administrator account if you don't a;ready have one. Or if you have another account that is not an admin account, you can temporarily promote it from the control panel>>User accounts.

  • ODI update procedure does not finish

    Hi all,
    I would like to execute some arbitrary SQL to update some rows in an intermediary table and am using a procedure to do so. It runs but never seems to complete. If I do a dummy procedure with SELECT 1 FROM Dual then it runs fine, but this one with an UPDATE does not work. I have tried changing the commit settings to no avail.
    Also, the UPDATE statement that I am running is valid SQL (obviously) but it's a smaller version of the statement that I really want to execute -- it seems that the larger statement I want to run is somehow getting parsed wrong by ODI (even though the code works fine if I just execute it myself).
    Just wondering if anyone had any thoughts on a Procedure step hanging, thanks.
    Jason

    It seems you have some deadlock during the update step. Basically, it occurs when 2 sessions try to update the same records at the same time (or when one of them didn't commit).
    Launch it again, and check with your DBA the oracle sessions (you can also check it with PL-SQL Developer tool) to see if there is a deadlock (error ora-00060).

  • Droid X2 2.3.4 OTA update does NOT install on my phone

    Hello,
    Today, when I checked for software updates in the settings page of my Motorola Droid X2, it said the 1.3.380.en.US is ready to be applied. I downloaded it and clicked on install once download finished.
    The phone reboots, shows the logo and the progress bar for installing the update and then shows an exclamatory mark. The progress bar also stops. Then the stupid phone reboots and when I unlock it, it says the update has failed.
    This is unacceptable from a smartphone and I am already **bleep**. Firstly, the phone has 10's of issues (music stutters, etc.) and many people complained about it. And Motorola releases this update that is supposed to fix those issues. And now, the update does NOT even install. Why? Please let me know what I am doing wrong. Or is anyone else facing this issue? Do I have a bad phone and should I replace it?
    Please help!
    A very very frustrated Droid X2 owner.

    I can't speak specifically to the DX2, as I have the original DX ... I assume you've tried a Battery Pull ??  Just power it down, remove the battery and leave it out for like 1 minute - reinsert & power up. See if it proceeds with the update ... if not, you'll likely have to do the factory Reset.  If you have data on your SD Card that you want to preserve make sure you don't select "Format SD Card" -- or just remove it entirely before starting the F.R. process.
    If you take it to Verizon or call them, they will likely walk you through, or do, the factory Reset anyway .. And since you seem to have "10's" of issues, this might be the best path for you to take anyway ...  and in fact if it were ME, I would just bite the bullet, allow the Format of the SD Card, and be done with it ..  Of course you'll have to re-download all of your FREE apps after doing so.  And if you can't get the phone to boot up, that in itself can be a challenge because Market won't know about them after you do the F.R. 
    So if you decide to do that, I would go ONLINE to MARKET and write down a list of all your Free Apps before starting the process.
    Good luck ..
    http://community.vzw.com/t5/DROID-X-by-Motorola/Factory-reset-the-what-why-and-how-for-Gingerbread/m-p/544836#M24742

  • Viewer Builder update does not install

    The Viewer Builder update (Viewer-Builder-1.7.0-RC.dmg) does not install.  After downloading and removing Viewer Builder from the Applications folder, this update does not install.
    Steps:
    - Removed Viewer Builder app from Applications folder
    - Download update from Adobe Site
    - Click to install
    - Opens package and performed some kind of install activity. There are no prompts and quickly finishes
    - No Viewer Builder installed.
    Any insights on to this would definitely help.
    Adobe DPS on MacOS Lion

    upgrade folio builder tools does not work..
    this morning I tried to update the folio builder tools, from out of indesign cs5.5 on a windows PC..tried 5 times...still get the update message in the folio builder panel in Indesign.
    this afternoon I tried the same on a completely different windows machine...same result...the thing does not work, no upgrade gets installed, I tried 20 times, even also the other tool....????????
    2 days ago, I tried it on an other machine and it worked fine....
    regards..Anne

  • Windows update does not work after using System recovery disk

    I have a Toshiba Satellite c655 with WIndows 7 64 bit Home premium. The hard drive died on it, so I purchased a new hard drive and purchased the appropriate Recovery media from Toshiba. I followed the directions and installed the 3 disks on to the new hard drive. But Windows update does not work I get the following error: Windows update can not currently check for updates, because the service is not running. You may need to restart your PC    No matter what I try, I can not get it to work. And it will not let me install Windows Defender either. Any ideas or help would be appreciated. Thank you in advance for your time on this matter.
    Solved!
    Go to Solution.

    I get errors saying A problem is preventing the troubleshooter from starting.
    That makes two similarities to the following thread. Both Windows Update and Troubleshooters fail to work correctly.
       Trouble with reinstall of Win7 64 on a L505-ES5018
    The fix was to install a new hard disk driver.
       Intel Rapid Storage Technology
    -Jerry

  • HT4623 When i click on general settings, the software update does not seem to come up? It wont let me download any apps.

    When i click on general settings, the software update does not seem to come up? It wont let me download any apps.
    I Want to download i0s 5
    i have ipod touch 3rd gen

    You need to connect your iPod to iTunes on a computer and update from there.
    Before updating, I recommend that you create a backup first, using : http://support.apple.com/kb/ht1766
    Please note that iPod 3d generation only goes up to iOS 5.1.1
    To update the iPod, use: http://support.apple.com/kb/ht4623
    scroll down to the part that's about updating with iTunes.
    Good luck
    Stijn
    Message was edited by: jesterwylde

  • "The updater does not have a firmware image"

    My initial problem was that I suddenly could not copy purchased music from iTunes to my iPod. I tried the suggestion of downloading the iPod Updater. The Updater did indicate that my iPod software, 2.2, "needs update". Upon attempting to install the Updater (by clicking 'Update'), I received the following message: "The Updater does not have a firmware image." I notice that SEVERAL people are having the same problem at this very moment on this message board. I hope someone from Apple notices this fiasco and does something to fix it. Please help. Restoring my iPod is not an option for me. Thanks.

    Yes, I've had this problem too. And the iPod has not been updated with any of the tracks I bought since updating to iTunes 5, but iTunes REloaded all the older tracks onto my iPod. Why? Seeing as the upgrade to iTunes 5 was a bit traumatic in itself, I'm not altogether surprised to discover the newer tracks had not been copied: there is obviously some incompatability here somewhere - but goodness knows where.

  • How can I use Bluetooth it does not detect others iPhone

    How can I use Bluetooth it does not detect others iPhone

    The bluetooth functionality on the iPhone is limited. It's basically limited to audio devices (headsets, for instance), although certain apps allow greater functionality. Search the app store for "bluetooth share"

  • How do I download IOS5 onto a first generation ipad? Software Update does not appear under General in Settings on the 1st generation.

    How do I download IOS5 onto a first generation ipad?  Software Update does not appear under General in Settings on the first generation ipad.

    The Settings > General > Software Update option only appears when you have iOS 5+ installed, if you have iOS 4 then you will need to do the update via your computer's iTunes.
    Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases. You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.
    Then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button
    Updating to iOS 5+ : http://support.apple.com/kb/HT4972

  • I DON'T WANT TO UPGRADE OR HAVE AN ADD ON EVER, DISABLING UPDATES DOES NOT WORK, HOW DO I KILL ALL MEASAGES FOR UP GRADES AND ADD ON'S FOR EVER, ONCE AND FOR ALL, COMPLETELY, THE END AND NEVER BE BOTHERED AGAIN EVER!

    I DON'T WANT TO UPGRADE OR HAVE AN ADD ON EVER, DISABLING UPDATES DOES NOT WORK, HOW DO I KILL ALL MESSAGES FOR UP GRADES AND ADD ON'S FOR EVER, ONCE AND FOR ALL, COMPLETELY, THE END AND NEVER BE BOTHERED AGAIN EVER! ALSO IF I KILL MYSELF I WILL HOLD YOU PERSONALTY RESPONSIBLE.edit

    There is a world of information in these forums if you use the search function near the top right of this page. Just type in NAS for example and you get many threads on the subject (marked with a green checkmark if it solved the question) another example would be Airport Exterme and sound system. Once you formulate your ideas better then specific questions can be addressed one at a time. You may find that a less expensive choice for a server might be a mac mini. Good luck with your project, ask more specific questions and update you systems profile.

  • Import From CSV File statement runs forever, no error, does not finish

    Hello,
    I am trying to import a CSV file in a JAVA program, with the following statement:
    IMPORT FROM CSV FILE '/debug/testdatabase/FILE.csv'
    INTO "JOSEPH"."TEST_TABLE"
    WITH COLUMN LIST IN FIRST ROW
    RECORD DELIMITED BY '\n'
    FIELD DELIMITED BY '\t' ERROR LOG '/debug/testdatabase/file.err'
    THREADS 10
    BATCH 10000
    I have two HANA instances on different machines A and B:
    Both machines run HANA version 1.00.74.00.389160 (NewDB100_REL), while the OS is
    SUSE Linux Enterprise Server 11.1 on machine A and
    SUSE Linux Enterprise Server 11.2 on machine B.
    The statement above runs fine on machine A and the rows are imported properly from JAVA as well as when executed from HANA Studio SQL console.
    If I copy the file to machine B and try the exact same statement with the same file, it does not finish (neither from JAVA nor from HANA Studio SQL console). There is no error either. It cannot be cancelled, only a HANA restart stops the statement. Also the sample file I use has only 2 rows, and memory does not seem to be a problem.
    I seem to have a similar problem to the one described here, but the answers there do not help me: http://scn.sap.com/thread/3396582 I specified the record delimiter, and I used a python script to check for any strange characters that are not supposed to be there, but didn't find any.
    If I copy the file to my windows PC and use the "File Menu -> Import -> SAP Hana Content -> Data from Local file" function, it imports the file correctly into B, but I need to be able to do it from JAVA.
    Machine A administration view:
    Machine B administration view:
    If you have any idea what might cause this behavior or where I can find more information on this problem please give me a hint.

    Hi Joseph,
    First from the pics, the revision of your SAP HANA instance is 73 instead of 74. Since I have no identical environment, I cannot test it for you. But can you try the simplest scenario? You can create a table with only one column table try to import a CSV file with only one row.
    Best regards,
    Wenjun

  • Photoshop CC 2014 (fresh installed and updated) does not recognize my graphic processor (NVIDIA GTX 840)

    Photoshop CC 2014 (fresh installed and updated) does not recognize my graphic processor (NVIDIA GTX 840) but instead only a Intel HD 4600. How do I ensure that PS is using the full phardware power of my notebook. My OS is WIN 8.1 Thanks for your help, Meik

    In the end it was the NVIDIA software - excluding PS as application for support by high performance graphic processor to save energy - activated NVIDIA card use for PS & LR all fine now.

Maybe you are looking for