Bluetooth w/ voice commands is not working correctly after 2.2 update and factory default.

I  have been having numerous problems with my phone and now a problem with the Bluetooth.  I have a Sony Xlopd Stereo in my car with built-in Bluetooth capability.  I have been able to use the phone connected to the Sony flawlessly for several weeks.  On an in coming call the Caller's name and the ringer would go through the speakers in my car.  When I wanted to place a call from the car I would press the Bluetooth button on my stereo, this would launch the voice command program on the Droid X and output the voice commands responses through the stereo and then dial the phone number I was trying to call.  Then I updated the phone to 2.2 and still maintained all the same Bluetooth capability.  However, after having other problems with the phone after the update I decided to do a Factory Rest.  After the rest it seemed to clear up some of my issues; except now when I re-paired the phone to my Sony stereo I have lost a lot of functionality.  For example, now when a call comes it does not announce the caller or ring through the stereo.  When I try to place a call through the stereo, the voice command program is no longer launched on the phone and it will not place a call.  I have to initiate the call through the phone itself and then the Bluetooth automatically picks up the call.  I have tried to wipe the paring from the phone and stereo and pair again with no luck.  I have also checked the volume settings and most settings on the phone.  This frustrating when trying to place a call.  I would not be so bad if I never had the capability, but now knowing that it was possible at one time I want it to work again. 
Does anyone know if this functionality was lost after the update and my phone was still "stuck" between 2.1 and 2.2? 
Or is there another problem with my device that can't be resolved? 
 I am open to any advice, since Verizon will not replace my phone that has signal and reception issues dropped calls, reboots randomly among other things and now this issue even though I pay $8 a month for warranty and pay my bill with four other phones.  
I am really hating the Driod X with all the flaws and inconsistency..I miss my Blackberry.

ridgey115 wrote:
I was having the same problem with my X right out of the box. Using a Motorola T505 handsfree device. Turns out that it acts exactly as you describe if the screen lock security is enabled. Once I disabled that, it worked fine. It does take a few seconds for the voice prompts to activate, but other than that it works. Not sure if you use the extra screen lock security, but if you do, you may want to disable it.
Its been so long that I thought about that issue but that is correct, when the device is locked using the password or swipe feature it does restrict the voice dialed from activating from bluetooth...

Similar Messages

  • Bluetooth not working correctly after iOS 4 update

    I recently purchased and have been enjoying the Bose sound link wireless music system in fact I can't say enough about the accessory connecting wirelessly my iPad and iPhone to enjoy music. After the iOS 4 update my iPhone will no longer connect to the bose system while my iPad has no trouble.
    Anyone else experiencing similar Bluetooth issues?
    Tom

    I also have an issue after 4.0 update today.
    Can't discover any bluetooth devices from my 3GS iPhone. It "spins the wheel" searching but never finds any.
    Bluetooth pairing from a Macbook Pro 17 / 10.6.4 results in a passkey being sent to the iPhone but the pairing hangs and there is no connection to the phone.
    So the bluetooth kind of works. .the hardware is functiong (and was fine under 3.1.3).
    This suggests it may be the new iOS4.0 with a few glitches

  • Camera does not work correctly after op system update

    UUpdated op system and now camera does not function. Reset pad and made no difference 

    There's more than one type of reset ...
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    No data is lost due to a reset.

  • 6120 classic:My voice commands do not work

    Please help.
    Don’t know if I'm just being stupid or there is something not right with my 6120c.
    My voice commands do not work.
    If I press the button for a voice command, it says that there are no voice tags saved.
    If I go into the voice command application (Which should create the voice tags on opening), I cant playback the voice tags, its give a 'voice system error' error message.
    Is there something that is not set up properly? In the voice command settings, the synthesizer is 'on'?
    Also, I don’t have voice tags on my contacts??
    I read somewhere that this is a firmware problem and the phone should be taken back to nokia. Is this the case?
    Somebody please help.

    I formated my nokia n6120 using the code *#7370#. It deletes !everything! (settings, aplications...), but I have no voice sytem error now.

  • My MacBook Pro keyboard not working correctly after Win7 bootcamp installation. In OSx boot it keep Win keyboard. How can I have Mac keyboard in OS boot and Win keyboard in Win boot?

    My MacBook Pro keyboard not working correctly after Win7 bootcamp installation.
    Installation went well but when I boot either with OSx or Win it always keeps Windows keyboard.
    How can I have Mac keyboard in OS boot and Win keyboard in Win boot?

    Hi - I have the exact same model as your MacBook and had a few questions as mine is acting up. I upgraded the ram to 8gb (2x 4GB ram) and ever since then my computer has not been running as smoothly and the start up time is horrendous. Have you encountered this problem? And if so how did you fix? What would you advise me do?
    I was thinking of reverting back to the original factory 4GB then rebooting the entire computer. Any suggestions?
    Thanks in advance!
    Allen

  • Keyboard not working correctly after updating to 8.1 64bit pro.

    Keyboard not working correctly after updating to 8.1 64bit pro.
    After I updated, everything seemed ok and then all of the sudden I rebooted and only the f1 – f12 row would work. I resorted to resorted to unplugging and removing the battery and it would work for a short amount of time. This has been reported on other laptops as well, see here.
    http://answers.microsoft.com/en-us/windows/forum/w​indows8_1-hardware/windows-81-keyboard-problem-cou​...
    I think it can be solved with a driver update from hp or the keyboard builder but none is online.

    Hi,
    Please put the units product no. in the link and check if your PC is tested by HP with Windows 8.1
    http://www8.hp.com/us/en/ad/windows-8/upgrade.html
    Let me know if you need more help.
    I am an HP employee.
    Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
    ***Click on “Kudos” STAR to say thanks!***

  • Ps CC 2014 is not working correctly after mac update to Yosemite 10.10.1.  Select does not protect unselected areas.  Magic eraser erases unselected ares.

    Ps CC 2014 is not working correctly after mac update to Yosemite 10.10.1.  Select does not protect unselected areas.  Magic eraser erases unselected ares.

    Yes my particular issue is not like yours. However, there have been many other laptop users experiencing similar problem to yours after 3.10 kernel. Mostly it seems to be bumblebee users that experience your problem with the blank screen. We do know that nvidia have yet to make their official drivers work with kernel 3.10 and up. The drivers in the Arch repository have been patched to work with 3.10. From what I have seen, this also only seem to be affecting laptops with newer nvidia gpu's. I fear there is not much to do with this problem until nvidia give official 3.10 kernel support.
    My suggestion would be to stick with 3.9.9 kernel and the drivers that work with it, and don't upgrade those packages until nvidia has addressed these issues. If you have a look at the nvidia forums you will see quite a number of topics mentioning black screen when starting x on 3.10 kernel, and also a thread for the system dying. Reading some of the threads there may help you keep up to date on whether or not the issue seem to be solved.
    https://devtalk.nvidia.com/default/board/98/

  • My mini i pad 2 retina display screen is not work correctly after two days of buying appear some gray line on screen un furtunately i live in iran and i havnot access to any i pad store please guide me

    My mini i pad 2 retina display screen is not work correctly after two days of buying appear some gray line on screen un furtunately i live in iran and i havnot access to any i pad store please guide me

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
     Cheers, Tom

  • My bluetooth on my computer will not work.  I have checked 'ON' and DISCOVERABLE in system preferences.  I have restarted the computer.

    My bluetooth on my computer will not work.  I have checked 'ON' and DISCOVERABLE in system preferences.  I have restarted the computer. 

    Since you can get them working, at least temporarily, make those Favorites. If that doesn't help, then go into your home folder library and move the following to the Trash (but don't empty the Trash--if this doesn't help, you can always use File>Put Back to restore it to its original location.)
    In ByHost
    com.apple.Bluetooth.<long string of characters and numbers>.plist
    If you do this, you will need to reconfigure your Bluetooth settings. Might take  screen shots of them first (Cmd-Shift-4) Setting up Bluetooth again will create a brand new preference file.
    EDIT:  That's in your home folder library>Preferences.

  • Anyone know how to fix Bluetooth headset not working properly after iOS 8 update?

    I have an iPhone 5S and I use a Plantronics PLT M20 model bluetooth headset. I am no longer able to answer calls by pressing the button on the headset, since updating to iOS 8. I also also cannot end calls by pressing the button on the headset. This only happened after iOS 8. The Apple Care rep stated that "this is most likely a problem with the bluetooth manufacturer and they need to update their firmware, so now it's just a waiting game until they do that". Is that correct? Anyone encountering this?
    Related information....
    Hi - I'm a student with disabilities and rely heavily on accessibility features that make my life easier. For example, I use a Bluetooth headset to trying answer phone calls and use Siri… I especially use the "Raise to speak" option for accessing Siri. Since updating my iPhone five us and my iPad air, I've been scrambling to access the "raise to speak" option for Siri without success. When I called AppleCare, the representative stated I should have that option to enable in my settings. When I explained to her that the option is not showing, she wanted me to reset my phone to factory settings. When I told her I googled the issue and found that it may have been removed in iOS 8… She put me on hold, Came back and told me I was right.
    What's worse is that that my Bluetooth headset is no longer working with my iPhone 5S. She stated that it may being I needed adjustment from the manufacturer of the headset– Plantronics. All I know is that the apple care representatives seem confused and I am extremely disappointed in this really impacts my use of Siri and my phone.
    When I asked her to submit feedback to her supervisor or the powers that be… I was simply asked to submit feedback to the Apple.com website. While I understand Apple might read that feedback, I also recognize that they don't reply and I don't feel that is great support to someone like me who has a disability and needs a solution. The"Hey Siri" option is not working for me.
    Does anyone have any workarounds for the "Raise to speak" problem or the Bluetooth problem? Specifically, the Bluetooth issue is when I try to hit the button on my Bluetooth headset to answer a call or end the call. It's a Plantronics PLT M20 model.

    Follow-up to my earlier post that iPhone 6 Bluetooth not working correctly.  I purchased a Jawbone MiniJambox to use as a speaker phone in my office.  Everyone in our company thinks they are the best.  However, it is experiencing the same issues as with all my other Bluetooth headsets.  Everything works except cannot answer or hang up calls pushing the buttons on the Bluetooth devices.  The Bluetooth patio speakers in our courtyard also have the same issue.  However, my colleagues using iPhone 5 and 5s who did not update to iOS8 are using all Bluetooth devices without any issues.  Apple says it is a problem with my Bluetooth device.  Come on Apple.... This makes 7 different Bluetooth devices with different manufacturers.  You cannot possibly believe the problem is with the Bluetooth devices when iOS7 works perfectly fine...
    On another issue, my iPhone 5s worked perfectly fine in my vehicle entertainment center connected via USB.  The vehicle entertainment center had complete control of my iPhone and iTunes.  However, now I plug in my new iPhone 6 and it no longer communicates with my vehicle entertainment center.  Again when I called Apple, they said my vehicle entertainment center needed a firmware update.  Are you kidding me...  That is a bunch of BS...!!!

  • Spry tab not working correctly after custom changes

    Hi,
    i have used Spry Widget for making tabs in Dreamweaver for one of my project. i have customize these tabs. every thing was working fine until i add the horizontal scrolling to tab by jquery. tabs are not working correctly they do not show the tab content. i am sure there is some linking issue. all this problem begin when i added a addition div within the spry div tags if i remove <div style="overflow: hidden;" class="sc_menu" > every thing start working fine but this div control the scrolling and its important to put there. please can any one guide me what i am doing wrong i have uploaded the project to my server. below is the zip file link to download.
    http://khurram.visbl.com/test.zip
    please let me know if someone having problem in downloading above zip file. also waiting to find a solution for above. hope anyone is here who knows the solution 
    Best - Khurram

    Sorry to disappoint, the structure of the tabbed panels is
    <div id="TabbedPanels1" class="TabbedPanels">
      <ul class="TabbedPanelsTabGroup">
        <li class="TabbedPanelsTab" tabindex="0">Tab 1</li>
        <li class="TabbedPanelsTab" tabindex="0">Tab 2</li>
      </ul>
      <div class="TabbedPanelsContentGroup">
        <div class="TabbedPanelsContent">Content 1</div>
        <div class="TabbedPanelsContent">Content 2</div>
      </div>
    </div>
    As soon as you change that structure, this widget (out-of-the-box) will not work.
    Gramps

  • Remote does not work correctly after update

    Hello,
    the subject explain it already:
    After upgrading to 2.3 the apple remote does not work correctly anymore:
    I need to push the buttons twice, and than atv is only reacting sometimes.
    Any ideas?
    BR
    Frank

    Same problem here. First, I thought it was the Apple remote's battery. I replaced that and the problem persisted. I then used my digital video camera to verify that the remote was actually transmitting infrared, it was. In frustration, I tapped the buttons rapidly while pointing at the Apple TV. The Apple TV responded. The next button press it failed to respond. I tapped rapidly again and it finally responded. After many many rapid presses, while pointing directly at the Apple TV, it finally began responding to all presses. Once I'd regained control (I thought) I unpaired and re-paired the remote. Everything continued to work. At that time I also saw that I could "learn" another remote. So, I set up my Samsung TV remote. Sweet. Until the Apple TV went into screensaver mode again and I had to go through the same rapid button press sequence... with either the Apple remote or my learned Samsung remote. Conclusion, since the Apple TV will become fully responsive after the rapid button press sequence, it is certainly a software related problem.

  • My mouse is not working correctly after upgrade to ITunes 11

    I upgraded to iTunes 11 for WinXP and now my mouse is not working correctly. No double clicks, no right button function and sometimes refuses to do simple left click options. What can I do?
    I've tried new mouse drivers and checking the settings in Control Panel but no joy so far.
    Driving me mad and taking me three times longer to do anything as I look for keyboard solutions.

    I'm facing the same problem too on Windows 8. No mouse clicks (just 'ding' sound whenever trying to click anything).
    I could work around it on Windows 8, but ultimately have to restart my PC to get back mouse functionality.
    I wasn't quite sure which app is to blame, but ultimately concluded it's iTunes 11. As this behaviour always concided with having iTunes running in the background for 15-20 minutes (usually listening to podcasts) and never seems to happen when iTunes 11 isn't running.
    Don't know what to make of this, I'm currently playing my podcasts through Windows Media Player instead. I'll hopefully try running iTunes 11 in Windows 7 Compatibiliy mode to see if that helps.

  • HT201365 my text to send messages is now not working correctly after upgrading

    Since upgrading last week my text is not working  correctly it is very slow does not show the letter being used and takes seconds to be put in

    Looking into the Diagnostics and Usage Reports in 'Settings' -> 'General' -> 'About' I see nine different "ExcResource_MobileMail_DATE" reports. Looking at the report I see a SysInfoCrashReport that indicates that the CPU was pegged at over 50% (mostly over 75%) for over 180 seconds using the MobileMail app.
    I also see a "MobileMail_DATE" report that indicates that there was an 'Exception raised during monitored invocation of _loadMoreMessagesWithMaxVisibleIndexPath:maximumIndexPathsBySource:, exception: ** -[__NSArrayM objectAtIndex:]: index 4294967295 beyond bounds for empty array"
    And finally I see three "stacks+MobileMail-DATE" reports with "Power assertion timeout for 'com.apple.message.fetchMobileSynchronously...' Simply resetting it now." and "Power assertion timeout for 'com.apple.mobilemail.messagebodyloader' Simply resetting it now" reports.
    I updated to iOS 7.0.4 and decided to try and delete the account in my Mail settings and recreate it and set it to manual instead of the non-working fetch. Now, when I try to check my mail it still takes up to five minutes to respond, pulling the screen to refresh brings up the spinner for about one second and then disappears and no indications of activity occur until about three minutes later when I see the spinner in the status bar near the clock and then see a notification that it's downloading X of Y messages. At that point, message headers come in very quick and then about a minute later message previews come in. At random times, opening the mail app I get a "Password incorrect" error, even though the password works on other attempts.

  • My wacom tablet does not work correctly after updating to mavericks.

    My wacom doesn't work.

    Jason, how did you switch back? My tablet does not work either. All I can do for the moment is work on my laptop which has the old system.
    Thanks,
    Teresa
    I was almost certain that the new osx would be trouble as was Lion and after that Mountail Lion. So, instead of my usual hard drive clone, which I make with superduper, I made a second one just to be certain. After 10 minutes of Mavericks, I am happy back to snow leopard.
    I really think that it is the most developed, glitch free operating system. If it wasn't for all these money thirsty companies stopping the support of the previous op. systems perhaps we could stop at Snow leopard. What more to ask. Even aesthetically osx 10.9 is much worse that snow leopard.
    Anyway, long answer. sorry. It is a good habit to clone your HD once in a while.
    p.s. my only reason for wanting to upgrade is because Lightroom stopped support but I am still doing my work with the previous versions. I guess people will allways think that if they have the newest, biggest, baddest version of a software will make them better in what they do..or in who they are, really.

Maybe you are looking for

  • AA634 : Write up of current year's depreciation

    Hi, I believe we cannot write up current year dep but only of the previous fiscal year. Is there any way to write up for current year's depreciation? I cannot post a negative amount in uplanned depreciation. If I enter the amount of the curreny year

  • Error in joining Total A/R Down Payment Invoice with A/R Invoice.

    Hi Everybody, After creating a sales order for a customer, with the help of that sales order I had created the A/R Down Payment Invoice. But while making A/R Invoice, when I browse for A/R Invoice down Payment It shows  me the error, No down payments

  • How do I randomize songs in a playlist created usint the New Playlist From Selection

    How do I randomize songs in a playlist created usint the New Playlist From Selection?

  • Pdf download damaged

    the document A96670-01 PDF HTML Oracle Enterprise Manager Administrator's Guide in pdf format errors after downloading with file damaged cannot repair. It also will not open online even after waiting for several minutes. The html version appears to b

  • Widget "TimesSquare" (in Webcams category) issue

    That widget has been not working anymore since a couple of month. I've tried to trash the two appledashboard preferences, repaired permissions, but no changes occured. Is this a matter of Leopard Update not compatible with that very widget. I've been