Bluetooth will not enable on BB 8330 for sprint

Hello group I am new here and hope you guys are able to help me, I have search the web all over and see a number of people with the same problem but no solution.
the problem is as follows:
I have the BB 8330 for sprint for about 9 months, I have always used a head set (stereo) for music and making calls it had work very well until about a month ago when it started disconnection all on its own.
now the connection for bluetooth on the BB does not work at all, when I go into options to enable I see the message enabling bluetooth but it does not do it.
I would really apreciate it if someone helps
have fun, make money, help people (mr li)

Found another thread that mirrors your issue. Never asked what OS you are running; thread suggests an upgrade. Read and see what you think: http://supportforums.blackberry.com/rim/board/message?board.id=8300&message.id=10984&query.id=101955...
Take note of what Bifocals posts as well as bumblepie!
If the OS isn't your issue, maybe it's time to give yourself the gift of a new BB!
IrwinII
Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

Similar Messages

Bluetooth will not enable(6230i)

Hello
I have a new 6230i and when I go to the Bluetooth menu and select
Bluetooth->On
it goes back to the Bluetooth menu with bluetooth set to 'Off'.
If I turn off the phone and turn back on and try it again, Bluetooth->On, I get the message:
"Switching on Bluetooth"
but it goes back to the Bluetooth menu with bluetooth set to 'Off'.
I have tried the same with a 6230 and Bluetooth switches on everytime.
Does it sound like my new 6230i is broke? Any ideas?
Are there any firmware upgrades which could fix this?

No didnt drop the phone but if it was damaged by a drop i would have expected something else to be damaged. I have used the USB cable, IrDA, camera and normal phone operation and they seem to be ok, just the bluetooth will not enable. This leads me to think it is a problem from the factory.
First thing i tried was taking out the battery as you suggested. I will return to the store and see what they think but is there a Nokia tech support?

8220 - Bluetooth will not enable

Hey guys, I've had my BB Pearl Flip for a couple of months now. It works great and I really like it. However recently I've run into a problem that I can not find an answer to. I use my BB as my mp3 player via a bluetooth headset. Recently I have not been able to enable bluetooth on my phone, which is leaving me without tunes.
When I go to "Manage Connections", Bluetooth has a red X. So I highlight it and click my ball and it greys out with a checkmark for a few seconds, then goes right back to having a red X with no message.
When I go to "Set up Bluetooth" I tell it to either listen or search, both of which automatically sends me to "Enabling Bluetooth..." After a few seconds, that message simply goes away and the header remains on "Bluetooth: Disabled" with the rest of the screen blank white. Clicking options and going to "Enable Bluetooth" does nothing. No messages or error reports.
Clicking on "Bluetooth Options" sends me to a blank white screen with a header saying "Bluetooth: Disabled". Going to options and clicking "Enable Bluetooth" does nothing (no error, no sign anything happened).
I've tried reading these forums but I can't find anything like this. I tried pulling my battery out while the phone was on, and it did reboot and do that reloading thing. However bluetooth still gives me problems.
I usually leave bluetooth enabled on my phone at all times. I just charge my battery more often. Recently I turned off bluetooth because I needed more battery and did not have my headset for a few days. Now I just can't turn it back on.
If anyone knows what I may do to get my bluetooth musical goodness back, I'd be very appreciative.
Solved!
Go to Solution.

Have you updated the OS recently or install any new apps before the problem started?

SF300 LAG port doesn't work, LACP will not enable.

I'm trying to configure something that seems pretty trivial.
I need 2-3 ports to participate in a LAG port. First off, I get the "Port X belongs to a vlan" if the participating port is something other than access vlan 1. This is totally useless. I need these ports to be dot1Q tunnels. This happens even If i set the default vlan to 300, (300 is my native or PVID). Another piece that doesn't seem to work is that LACP will not enable, even if I throw in the towel and make my ports access vlan 1. What gives? I've tried this on the only firmware available which has no patches avail yet. I've tried this on 2x 24ports, and on 2x 48 ports.. all the same issue.

Hi I just gave it a try you can see my screen captures below.
If you are having trouble, have a word to the good folk at the SBSC if the switch is still under phone support coverage.
http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
Maybe play it safe and delete your settings and start again... Here are some screen shots from my attempt.
I have to admit I enabled LAG and LACP before I created vlan 100.
you can see i have the same software as you.
add the ports and enable LACP at the same time.
ports 47 and 48 are still excluded from my Tagged Vlan
Now I selected port drop down for VLAN100 and selected LAG.
I then received and then modified the following screen capture.
Note I manually added LAG interface 1 as a tagged member of VLAN 100.
Why Lag interface 1, because I created LAG 1 previously, as seen in a previous screen shot above.
regards Dave

IMAP will not enable

IMAP will not enable in mail server, using Panther 10.3.9 server
Even though I do not plan on using POP it will not enable either. SMTP
is enabled for both out going and incoming.
postconf -n
always_bcc = [email protected]
command_directory = /usr/sbin
config_directory = /etc/postfix
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
enableserveroptions = yes
inet_interfaces = all
luser_relay = postmaster
mail_owner = postfix
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
mapsrbldomains =
messagesizelimit = 10240000
mydestination = $myhostname,localhost.$mydomain,70.88.14.125,fieldshop.com
mydomain_fallback = localhost
myhostname = server.fieldshop.com
mynetworks = 127.0.0.0/8
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
relayhost =
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpdclientrestrictions =
smtpdenforcetls = no
smtpdpw_server_securityoptions = gssapi,cram-md5,login,plain
smtpdrecipientrestrictions = permitsasl_authenticated,permit_mynetworks,reject_unauthdestination,permit
smtpdsasl_authenable = yes
smtpdtls_certfile = /etc/postfix/server.pem
smtpdtlsloglevel = 0
smtpduse_pwserver = yes
smtpdusetls = yes
unknownlocal_recipient_rejectcode = 450
server:~ fieldshop$
also the mail log shows the following
Jan 21 00:20:14 server master[6691]: empty option value on line 20 of configuration file
Jan 21 00:20:14 server master[6691]: exiting
PowerBook Mac OS X (10.4.4)

Here are the contents
cat /etc/imapd.conf
admins: cyrus
configdirectory: /var/imap
partition-default: /var/spool/imap
unixhierarchysep: yes
altnamespace: yes
servername: server.fieldshop.com
sendmail: /usr/sbin/sendmail
mboxlist_db: berkeley
seenstate_db: flat
logrollingdays: 0
logrolling_daysenabled: false
tlscertfile: /var/imap/server.pem
tlscafile: /var/imap/server.pem
tlsserveroptions: use
imapauthlogin: yes
imapauth_crammd5: yes
tlskeyfile: /var/imap/server.pem
imapauthplain: yes
imapauthgssapi: yes
tlsca_filecontent:
quotawarn_frequencydays: 0
tlscommonname:
lmtpluser_relayenabled: false
lmtpluserrelay: postmaster
enable_pop: no
server:~ fieldshop$
PowerBook Mac OS X (10.4.4)

Iphoto will not enable photo stream

My iPhoto will not enable Photo Stream. All software is up to date and I have the latest version of iPhoto, in fact Photo Stream was working last week on my Mac. Now all I get is the msg "iPhoto cannot enable Photo Stream". Any thoughts ??

Hey dave2468, as you can tell by my original post, this problem surfaced several months ago and out of frustration for lack of an answer to the problem - I called Apple for support. I was fully prepared to spend the $50 bucks to resolve this issue but fortunately didn't have to. My problem did get resolved after about 1 &1/2 hours on the phone and the solution revolved around resetting my password for my account...can't tell you why other than ghost in the machine issue. Yours may be different issue but wanted to let you know how this ultimately got resolved. I have had no further issues relative to this problem since my phone consultation. Best of luck - I know how frustrating these things can be. B.

The sound on my hp stream notebook pc 14 will not enable.

the sound will not enable. i have tried downloading things to scan and fix the sound card...but they all cost money and i dont even know if it will fix the problem. it will not load the trouble shooting page either so i dont know what else to do. it has blocked all spund on my pc and nothing i try to do will fix it as i have to pay large amounts of money before any programes will fix the problem

@lauralawrence93 ,
Hello and welcome to the HP support forums. Lets see what we can do about your sound issue.
First think if possible could you post back with your systems Product Number.
Until then here are some links you can check out to see if they help.
No Sound from Speakers (Windows 8)
Here is one set of threads from the support forums.
Troubleshooting Guide: Audio does not Work after a Certain Period of Time
Thank you again for posting. Hope to hear back from you soon.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

HP 6700 printer will not enable web services.

My HP 6700 printer will not enable web services. I've already downloaded the firmware update, manually entered the IP and DNS numbers... shutdown the printer and turned it back on.But when i try to enable web services it try's for a while then says web services could not be enabled.. any help would be appreciated. I have vista.
This question was solved.
View Solution.

Hi there, two other things you could try (if not already attempted) are:
Check to ensure that you have the latest firmware for your router – review your router documentation/help (or the router manufacturer’s web site) for information on how to check for and install firmware updates.
Restore factory defaults - The factory default option is usually found in the Setup>Tools menu on your printer. Do the following on your device:
Remove/Disable Web Services
Restore factory defaults/settings (depending on the printer this is found under the Setup>Tools menu, or the Setup>Web Services menus, but varies by printer)
If prompted, re-do initial setup of your device and add it to your network
Re-enable Web Services
Once the Web Services information sheet is printed, use the printer claiming code to add your printer to your account on ePrintCenter
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee.

Radio will not enable

I am running a 2106 controller with 1242 AP,
Had them on a POE injector on the same switch worked fine, mounted them in the ceiling now the radio will not enable."error in enabling admin status". any ideas?

Hi Paul,
I think you might be running into this issue because the 1242 AP supports the Intelligent Power Management feature (which I didn't even know existed until recently). Have a look at the following.
Power Issue with the AP
When an AP uses a power injector as the power source, in some cases, the AP displays this error message:
CDP_PD-2-POWER_LOW: All radios disabled - LOW_POWER_CLASSIC inline
This message indicates that the AP is in low-power mode with all radios disabled and detects a Cisco switch that is unable to supply sufficient power to the AP. Even though the power injector, which can provide sufficient power, is connected with the AP, the AP still displays a LOW POWER error message and disables the radios. Therefore, the AP remains in low-power mode.
One possible reason for this issue might be that the AP supports the Intelligent Power Management feature. The Intelligent Power Management feature uses Cisco Discovery Protocol (CDP) to allow powered devices, such as an AP, to negotiate with a Cisco switch for sufficient power. The AP supports the Intelligent Power Management feature. As a result of the power negotiations, the AP either enters full-power mode or remains in low-power mode with the radios disabled.
In this case, the AP might be connected to a switch which cannot provide the necessary power to the AP. Therefore, even though the power injector is connected to the AP that uses this Intelligent Power management feature, it gives priority to the CDP information to identify whether or not the switch can provide the power. Once the AP knows, via CDP message, that the switch does not provide sufficient power, it disables the radios and remains in low-power mode.
The workaround to this issue is to tell the AP to ignore the CDP information for power. You can perform this by telnetting into the APs. Issue these commands to enable the APs to use the power injector:
power inline negotiation prestandard source
power inline negotiation injector H.H.H
The power inline negotiation command configures the Cisco Aironet 1130AG or 1240AG Series AP to operate with a later version of switch software that does not support Cisco Intelligent Power Management power negotiations.
The prestandard source portion of the command specifies that the Cisco switch runs a later version of software that does not support Intelligent Power Management negotiations, but is able to supply sufficient power to the AP.
The injector H.H.H portion of the command specifies that a power injector supplies power to the AP, and that the AP connects to a new switch port with the indicated MAC address (H.H.H). Enter the MAC address (in xxxx.xxxx.xxxx hexadecimal format) of the new switch port where the power injector is connected.
Note: This command should only be used when you move an AP and power injector to a different switch port.
From this good doc;
http://www.cisco.com/en/US/products/hw/wireless/ps441/products_tech_note09186a00800a86d7.shtml#new3
Hope this helps!
Rob

IPhone 4 Bluetooth will not pair with Jawbone Icon, Jawbone 2

Just got my iPhone today and am more or less thrilled to have it. The only problem (other than the antenna issue, which the bumper fixes beautifully) is that Bluetooth will not pair with any of my Bluetooth devices. When I turn on Bluetooth on the phone and turn on the headset, iPhone says it's "searching.." and "now discoverable" but it never discovers anything, let alone pair up. The Bluetooth on my MacBook recognized the iPhone and I was able to pair them, but no luck on the Jawbones. Sounds like a JB problem, but I'm wondering if anyone has had this problem and if there's a fix via the iPhone.

On the icon, turn it off and hold button down while sliding the power switch on. This should put it in pairing mode. Then go into your i4's bluetooth menu and give it another go. Also, Jawbone has recently updated the firmware for the Icon so you need to load it as well. I have the icon and a Jabra cruiser and both work/paired fine. You may want to try rebooting phone and retrying as well.

Imac bluetooth will not see my samsung smartphone

i have a samsung smartphone but bluetooth will not connect to my imac any sujestions

Thank you. That's what I thought will need to happen.
One more question. I tried using the Apple install disk that came with the computer. It's an OS 10.5.6 disk. It does not see my 10.6.8 system internal hard drive to repair. All it see's is itself 10.5.6 disk. Do you think I can use a 10.8+ disk utillity since that is a higher system it will see the 10.6.8. Where the 10.5.6 does not?
I don't want to turn the computer off for fear I'll get the question mark again. P-Ram got me going last time but for how long I don't know? It would be nice to be able to turn the computer off for the night and startup as usual to give it a rest and try to reset itself.
Thanks for your help, I know I will eventually need to re-install. But I am in the middle of a project with tight deadlines and all I can do right now is back-up. Trying to migrate to another computer temporarily to finish the job. That's a lot of extra work in the short time also.
Just trying to put a band-aid on it for another couple weeks.

I have created an apple id but it will not work on my pc for icloud.How do I sign into icloud?

I have an apple id but that id will not work on my pc for icloud..How do I get an icloud id?

To enable iCloud on your Windows PC,
first set up iCloud on your other (Apple) devices,
then install the iCloud Control Panel for Windows...
From Here > http://www.apple.com/icloud/setup/pc.html

HT4623 My Iphone5's bluetooth will not connect with anything

the bluetooth on my iphone will not discover any devices nor will it allow it to pair with other devices. I purchased an Iphone 4S at the same time and it is presenting the same problems. I have restarted it and I have rebooted it to no avail.
Jay

The iPhone Bluetooth is designed to connect to speakers, headphones, car audio systems, keyboards. If you are attempting to connect to other devices, it will not work. See below for a complete list of supported protocols.
http://support.apple.com/kb/HT3647

For the 2nd day my iPhone 5 will not let me download updates for apps. When i click update, it acts as if it is going to update but puts all apps in "waiting" status. I've tried selecting each, as well as deleting and re-downloading but to no avail.

For the 2nd day my iPhone 5 will not let me download updates for apps. I've tried selecting each to click off wait, and have selected new updates indvidually instead of all together. Also have shut the phone down and have even deleting the apps completely and re-downloaded but to no avail. Each app continues to sit on my screen with the line below as if it is about to download but never does, and now any apps I've tried to updated will not let me use them.

Oh my gosh I had the EXACT same problem, and for ages I couldn't figure out how to fix it until today. Here's what I did:
First I went onto my computer, opened itunes, and un-installed tumblr, vine and kik. These were the apps I was having problems with (it said I had them on my phone but, like you, they didn't show).
Then I went to the itunes store, searched for each one, and it said I could update them so I did (just FYI: for tumblr a window popped up saying "please click ok to confirm you are 17 years or older", so I did that also)
When I went back to my phone and tried installing them again (still on my computer), it worked!
I hope this helps, because it was incredibly frustrating. Good luck!

I have a canon 70d and just purchased elements 12. It will not open a raw file for me. I have been advised to download the latest version of camera raw, i have done this and it still says my camera is not supported. I really need to open my raw files. Can

i have a canon 70d and just purchased elements 12. It will not open a raw file for me. I have been advised to download the latest version of camera raw, i have done this and it still says my camera is not supported. I really need to open my raw files. Can anybody help me.

You'll need to update to at least ACR 8.2 for the 70D to be recognized. The normal way to update PSE12 to the latest CR is to use Help / Updates in the Editor which should update to ACR 8.5.
According to Adobe's website PSE12 shipped with ACR 8.1 and you say it says yours is reported as ACR 8.0.
Are you using PSE 11 and not 12? PSE 11's maximum ACR version is 8.0.

Bluetooth will not enable on BB 8330 for sprint

Similar Messages

Maybe you are looking for