Bluetooth Wireless Keyboard and iPhone
Is it possible to pair the Apple Wireless Keyboard with the iPhone using Bluetooth??
My vote for this in a future update.
The iPhone is useful as it is, but when I try to use it out-and-about to admin a load of unix machines it gets very boring typing long and complex command lines in using the onscreen keyboard. The BT keyboard I already have which I used to use with an iPaq was excellent for this.
Onscreen KB - great example of the breed for "normal" use, but please give us the choice Apple!
Similar Messages
-
Running Boot Camp in Windows 7 with Bluetooth Wireless Keyboard and Wireless Magic Mouse
NOTE: I was installing a fresh copy of Windows 7 Professional on a 27" iMac mid-2010 with a Processor Speed of 2.93 GHz, a Core i7 Processor Type, a Quad Core Processor Configuration, 8GB RAM, and a ATI Radeon HD 5750 Graphics Card. I run Snow Leopard so it is a 64-bit OS. I have a Wireless Keyboard and Wireless Magic Mouse as well. In order to install Windows 7 you need a Wired Keyboard and Mouse. You will also need a Wired Keyboard and Wired Mouse to update Boot Camp.
Updating Boot Camp Assistant (VERY IMPORTANT)
First, plug in a wired keyboard and wired mouse. The Boot Camp Assistant version that came with my iMac was 3.0 so I upgraded it to 3.1 and then to 3.2. I'm not sure if only the upgrade to 3.1 is necessary, but I took it a step further. I was told by Apple Tech Support that you first needed to upgrade to version 3.1 before being able to upgrade to 3.2 These upgrades will not be found using Software Update on the Mac. However, they can be found at http://support.apple.com/downloads/#macoscomponents
They also have software updates for 32-bit machines as well and MacBook Pro updates.
NOTE: Before updating the version of Boot Camp, but after installing Windows 7 and after putting in the Mac OS X Install DVD to run Setup.exe to download the Mac drivers, run Software Update for the Mac while logged into Windows 7 by clicking on Start - All Programs - Software Update for any additional updates.
Next I installed Boot Camp Software Update 3.1 for Windows 64 bit found at http://support.apple.com/kb/DL1336
I then ran Software Update for the Mac while logged into Windows 7 by clicking on Start - All Programs - Software Update
Then I installed Boot Camp Software Update 3.2 for Windows 64 bit found at http://support.apple.com/kb/DL979
I then installed Boot Camp 3.2 Update for iMac (early 2011) found at http://support.apple.com/kb/DL979 but I'm not sure if this was necessary.
Once Boot Camp 3.2 has been installed I ran Software Update for the Mac again while logged into WIndows 7 to make sure I had all the updates.
Configuring a Bluetooth device on a Windows-based computer
(from http://support.microsoft.com/kb/952818)
How to make sure that the Bluetooth service is started (MY COMPUTER WAS ALREADY SET UP TO RUN BLUETOOTH, SO THE NEXT 8 STEPS COULD BE OPTIONAL)
Open the Microsoft Management Console (MMC) snap-in for Services. To do this, follow these steps.
Windows Vista or Windows 7Windows XP
Click Start, and then click Run.
Copy and then paste (or type) the following command in the Open box, and then press ENTER:services.msc
Click Start , copy and then paste (or type) the following command in the Start Searchbox, and then press ENTER:services.msc
In the Programs list, click Services.
If you are prompted for an administrator password or for confirmation, type the password, or click Continue.
Double-click the Bluetooth Support service.
If the Bluetooth Support service is stopped, click Start.
On the Startup type list, click Automatic.
Click the Log On tab.
Click Local System account.
Click OK.
If you prompted to restart the computer, click Yes.
How to connect the Bluetooth device to the computer
1. First off, you need to go into Mac OS and remove the keyboard and mouse from your Bluetooth settings entirely. You'll add them back in later (see 9) below).
2. Boot into Windows using a USB connected Mouse and Keyboard.
3. Go to Control Panel – Hardware and Sound – Device and Printers – Add a Device
4. Turn on the Mouse to send out a signal and once it sees it select it to be paired to the computer
5. Run 3.) again except select the keyboard.
6. Turn on the Keyboard to send out a signal and once it sees it select it to be paired to the computer by typing in the 8 digit number into the wireless keyboard and hit ENTER/RETURN.
7. To see if everything was added go to Devices and Printers and see if they were added to the list.
8. Shutdown Windows 7 and Restart using Mac OSX. If you adjusted the Boot Camp settings while in Windows 7 you will see a Boot Camp icon in the system tray located at the bottom right of the screen. From here you can logoff and reboot in Mac OSX. If you don't, do a RESTART and hold the Option key down after hearing the GONG and select the Mac HD option while logging in. Now it's time to add back the wireless mouse and keyboard to be recognized by your Mac.
9. Go to System Preferences – Internet and Wireless – Bluetooth
10. Hit the “+” button to launch the Bluetooth Setup Assistant to find the devices sending out the signal.
11. Highlight the device found and hit “Continue”
12. Do this for both the keyboard and mouse. You will be prompted to type in the 8 digit code into the wireless keyboard in order to pair it with your computer.
13. Click on the pinwheel next to the “-“ sign to rename the wireless devices if you'd like.
I then logged back into Windows 7 to see if the mouse and keyboard were functional and had no problems. For some reason, Windows has problems pairing bluetooth devices that are already paired under a Mac OSX. Many people have updated Boot Camp, yet still were not able to pair their wireless devices because they didn't break the Bluetooth connection on the Mac side first. So both steps are necessary (1) Updating to at least Boot Camp 3.1 if not 3.2 and (2) Deleting the Wireless mouse and keyboard link while running Mac OSX before trying to pair them in a Windows OS.I found the answers by trial and errors.
@ is obtained by CTRL + OPT + 2
# is obtained by CTRL + OPT + 3
(without shift or caps lock)
These two signs are critical and I fail to understand why this information is not readily available from the help function or from the Apple support.
Jean-Philippe -
Bluetooth wireless keyboard and Centro (Verizon)
Anyone else having trouble navigatating menus within Palm applications on their Centro using Bluetooth keyboard Fn or Cmd arrow keys? I can go up and down but not side to side. Downloaded latest driver which is actually the same driver that came with the keyboard.
Post relates to: Centro (Verizon)Follow up: Palm live chat passed me on to tech support, who advised the Centro is not compatible with the Bluetooth wireless keyboard, then passed me on again to the Palm store for a return. The Palm Store advertises the items as compatible and insist I just have a bad keyboard. They are shipping another. I will pass on the results with the new keyboard. Is anyone else successfully using a Bluetooth keyboard with a Centro?
Post relates to: Centro (Verizon) -
Wireless keyboard and iPhone 3GS
I am looking to buy an Apple wireless keyboard to hook up to my iPhone 3GS, but will it link via Bluetooth?
YES IT WILL WORK.
I know because I do it.
I don't know where Barry Hemphill got his info. I originally bought the Apple Bluetooth keyboard so I could run a home theater Mac from across the room. When I got my iPhone 3GS, it was already known that the iPhone officially supported the Apple Bluetooth keyboard. When I tried to pair them, it worked, and it's worked ever since. And it works with my iPad as well. I understand that non-Apple Bluetooth keyboards also work.
I took the Apple Bluetooth keyboard with me on a trip once where I knew I didn't need my laptop, but I wanted to type out some longer emails. It worked great, and was much less painful than long-form text entry on the iPhone keyboard.
The key to using the Apple Bluetooth keyboard with an iPhone or iPad is knowing about holding down the power switch on the side, so you can turn it off. This prevents unintended keystrokes from waking up an iPhone or iPad during transport.
Here is the official Apple tech note. The iPhone 3GS is listed.
http://support.apple.com/kb/HT4112 -
The old (2003) bluetooth wireless keyboard and snow leopard
I was thinking of getting this keyboard because it's the only wireless keyboard apple made that also has a number pad. My question is if anyone has any connectivity issues or issues after connectivity with this keyboard on osx 10.6.2 just because of how long ago it was made.
I have just plain Leopard at 10.5.8 and I can tell you that the mac find it, it's discoverable, but it won't fully sync. I'm not able to type a single letter. Worked just fine up until upgrading to leopard.
-
Wireless Keyboard and Mouse how to for XP Bootcamp
The promise of running Windows XP was marred by my inability to get the wireless keyboard to function in Windows during startup. Judging by the number of posts on this issue, I am not the only one who is frustrated. While didling with this issue I developed a sure fire, if somewhat un-Apple and in-elegant, way to get them to work.
First you need to create a driver disk using the latest version of Bootcamp (I used version 1.1.1) and install them under XP using a wired keyboard and mouse.
Now re-install the Apple Bluetooth drivers to make sure you have the latest version:
1. Boot into Microsoft Windows.
2. Open the Control Panel and select Bluetooth Devices.
3. In the Hardware Tab, click Apple Built–In Bluetooth.
4. Click the Properties button.
5. Click the Driver tab.
6. Click the Update Driver button and the Hardware Update Wizard will appear.
7. Choose "Install from a list or specific location (Advanced)".
8. Deselect "Search Removable media".
9. Select "Include this location this search".
10. Click Browse.
11. Navigate to c:/Program Files/Macintosh Drivers for Win XP/BthKicker/
12. Once the update is done, reboot.
Next we need to add the Apple Bluetooth Wireless Keyboard (and wireless Mighty Mouse if you have).
1. If you are using a desktop Mac, connect a wired USB mouse and keyboard.
2. In windows, open the Control Panel and select "Bluetooth Devices".
3. Turn Bluetooth Discovery to "On"
4. Make sure your Bluetooth Wireless Keyboard is on.
5. Click the Devices Tab.
6. Click the "Add"button.
7. When the "Welcome to the Add Bluetooth Device Wizard" window appears, select the "My device is set up and ready to be found" checkbox, then click Next.
8. Locate the keyboard in the list the Wizard provides, then click Next.
9. Connect and select the "Let me choose my own passkey" option.
10. Enter "0000", then click Next.
When the process has completed successfully, you will see this message: "The Bluetooth device was successfully connected". You should now be able to use your keyboard.
On your next reboot in Windows, the logon screen will come up and neither your wireless mighty mouse or wireless keyboard will work. To activate the mouse, click one of it's buttons once or twice and it will start after a couple of seconds. unfortunately keyclicks will not start the keyboard.
To get it to activate, turn the keyboard upside down and use the switch to turn the keyboard off and back on again. Wait about 6 seconds and voila! As I said, not elegant, but definately a lot better than having 2 keyboards. It would be nice if Apple could modify the firmware to start the keyboard when a key is pressed, just like the mouse.
Have fun!Here's what apple recommends:
http://support.apple.com/kb/HT3226
Regards,
Captfred -
I have wireless keyboard and a new magic mouse. I want to enter data into a Christmas list app on my 3GS iPhone. Too time consuming to just type on iPhone keyboard. How can I get keyboard and mouse to be 'connected' or recognized by my iPhone? I have Bluetooth "on" in my iPhone.
You cannot connect the mouse. This is not a feature of iphone
You can learn about connecting a keyboard in the manual:
iPhone User Guide (For iOS 5.0 Software) -
My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?
I would always have a wired keyboard and mouse on hand (need not be expensive ... any cheap wired devices will work). "Emergency recovery" procedures can activate features in random order, so the opportunity to select a recovery partition may pass before the wireless devices are recognized.
That will let you select the "turn on Bluetooth" icon. -
Bluetooth lags on new Mac Mini w/ Wireless keyboard and Magic Trackpad
Hi everyone,
I just bought a new mac mini (the basic model) and attached it via HDMI to a HD TV. I bought the mac wireless keyboard and magic trackpad to go with it. Everything works except that both the keyboard and mouse are consistently slow. Not quite to the point of un-useable, but very noticeable.
I've read that it might be radio interference with the bluetooth signal. To test this, I put my Macbook Pro right next to the new mac mini (while it and the screen were on) and paired the keyboard and mouse to the macbook pro. Everything was super fast, no lag - so that leads me to think the problem is with the Mac Mini. I've tried playing with all the bluetooth options, to no avail.
Anyone have any suggestions? I've also tried attaching a bluetooth magic mouse and had the same slowdown. Nothing seems to affect the lag, it's very consistent and probably around half a second between keystroke or mouse movement and it's reflection on the screen.
Thanks,
-MikeHey All,
I've got the same issue with my Mac Book Pro and a new Samsung LED 3D TV. Its connected through a DVI out from the mac to a gold HDMI adaptor, then to HDMI into the TV. I've used this set-up with my last HDTV which was a Sharp LCD, and there was no lag and no issues.
I noticed that for me, the lag appeared on the TV, but not on the laptop, so I thought it might be the connection (If I went right to HDMI instead of an adaptor maybe it'd be better) but I don't think it is given that the last TV worked fine.
I then went to my display settings in the control panel on my mac and changed the refresh rate from 24 Hertz to 60 Hertz (NTSC) on the TV and the issue has pretty much completely dissappeared. Not sure why that was the default, but I imagine certain video and other media will play even smoother as well!
Woo hoo!
Hope you all figure this out too!
TS -
My new apple bluetooth wireless keyboard types a "j" when I hit "k" and a "k" when i hit "j". Any ideas?
HellO:
I would not waste time trying to troubleshoot the problem. Since it is new, call Applecare with a warranty problem. I had a similar problem with a new KB some time ago and it was replaced at no cost (shipping included).
Barry -
I have Mac Pro 2007, which have no bluetooth hardware. What should I do to use Apple wireless keyboard and magic mouse??? Can 'third party's internal bluetooth card' be used for this purpose? Help me please...
You can find the Apple Bluetooth card on eBay for as little ten dollars (says its for the 2008 model Mac Pro, not sure about the 2007).
http://www.ebay.com/itm/Bluetooth-Board-iMac-and-Mac-Pro-922-8233-922-8233-/1208 49278570
Here is a link to a full explanation of the card and how to install it. Part numbers may differ a bit as that is an old article and newer models have come out.
http://www.xlr8yourmac.com/systems/Mac_Pro/Bluetooth_MacPro_install/Bluetooth_Ma cPro_install.html
Just make sure that the part will work in your model Mac Pro. To that end, you may be better off avoiding eBay and going to a parts reseller. There are even third party cards that use the internal Apple bluetooth slot.
http://fastmac.com/bluetooth.php
In theory, using a USB or PCI card will work at login so long as it is recognized by Apples drivers. You say you need to launch an application to use your current USB Bluetooth dongle? If it is not controlled by the Bluetooth icon in the menu bar then it must be using a third party driver of some sort. Unfortunately, I don't know off hand which USB and PCI cards are supported. -
Can i connect wireless keyboard and wireless mouse by bluetooth at same time?
i am palning to use wireless keyboard and mouse and connect it with my Macbook by bluetooth, so can i connect these two devices at same time?
i am pretty sure ther won't be any problem to connect 2 devices by bluetooth to Macbook
-
Just bought a new mac mini, wireless keyboard, and track pad. My track pad will not synch. All advise I have been given is to change items in the setting menu, but I cant because I still have to get through the setup!!
The power button for the Trackpad is on the right hand end of the battery case. Press that button to initiate the pairing process. On the top of the Trackpad just above the power button is a tiny green light (you probably cannot see it unless it is lighted). That light will indicate ehther or not the Trackpad is discoverable. If the Trackpad has discoverable the green light will blink on and off. If it does not pair within 3 minutes you will have to press the power button again to re-initiate the pairing process. Once your Trackpad has paired, you can just leave it on and it will pair automatically when you reboot your Mac.
If you are having problems pairing, try turning off any other Bluetooth devices within 30 or so feet of your Mac mini. That includes other Computers, iPhones, iPads, etc. that may be in the area. Once your Trackpad has pairedwith your mini, you don't have to be concerned about other Bluetooth devices.
One other hint, I find that although the Wireless Trackpad does not eat batteries as fast as the Magic Mouse it still uses more than the Wireless Keyboard. It is a good idea to keep a supply of AA batteries around. I have used Apple's Rechargable batteries, but found they did not last that long before needing to be recharged. I have had the best battery life from Duracell Quantum batteries. -
Apple wireless keyboard and magic mouse disconnecting
Just bought new MBP Retina Display (OSX 10.8.2) to replace 1st Gen. MacAir. Used to use Apple Wireless Keyboard and MM on old Air and worked flawlessley for years. New MBP installed both of these older items (keyboard and MM) cleanley when I set up, but almost instantly, after about one minute of working, the keyboard and MM disconnect themselves and the only way to reconnect is power them off and then power back up. I have hanged the batteries on both to high end ones and they are still holding charge very wel.
In my office I have a work PV that also uses two USB wireless devices for the PC keyboard and mouse and then also a small HDX Jam Bluetooth speaker. Also, my iPhone and iPad are around. My Airport Express is about two feet away from the MBP as well. Again, all of these worked just fine with my Air for over five years.
I took the MBP, keyboard and MM into the Apple store and had them check it out. Of course it worked perfectley while I was there, plus I learned that in my new MBP the wireless card has the bluetooth built into it and unless my wireless connections got wonky, then the chances of it being hardware were slim.
I am so out of options. I have tried to identify all environmental factors. I have tried moving the MBP closer, further, etc. and still nothing. It is the wierdest thing and now getting very frustrating because I am having to use the MBP keyboard all the time and it is supposed to be up on a stand and in a more ergonomically friendly position.
Anyone got any suggestions? Is there something I am missing? Is there something in my environment I am unaware of that could be contributing to this?I have a 15" MBP Retina display from 2012, Lion 10.7.5, running lid closed with bluetooth mouse and keyboard. My desk configuration has not changed but in the last couple of weeks I get both devices disconnecting simultaneously, once or twice per day. The dashed bar disappears from the Bluetooth icon in the menu bar.
I turn bluetooth off and on (lift the lid, using keypad), and then it all works again. I don't need to even touch the mouse or keyboard they instantly reconnect. It is not the magic mouse battery problem, I've suffered through that and have it licked, and that would only take out the mouse. There's nothing obvious in the system logs. No change I know of in nearby electrical appliances or WiFi configuration. -
My wireless keyboard and trackpad won't connect and i can't sign in
my wireless keyboard and trackpad won't connect and i can't sign in. yesterday I tested it with my mac air and it worked fine. i deleted the connection from my mac air and tried it again. then it worded. howerver, i shut down my computer correctly and tried it again today. now the same problem again.
HELP!!no, just a usb mouse. but I found an old usb bluetooth hardware. this made it possible for me to make it work. but as soon as I remove the hardware it says "no bluetooth available"! I re-istalled mountain lion but still the same problem.
additionally I deleted/reset the PRAM. still the same problem.
Maybe you are looking for
-
Something stuck in chargeing hole on iphone 4...impossible to get out?
If the people at the genius bar arent able to get it it out what do you think they'll do because the phone is outta charge?
-
Component Configuration on a sub-con Purchase Ord
Hi All, We have a reqt to create manual sub-con Purchase Orders to procure our finished products in certain cases. The FG & the component are both variant configured. Need is to be able to manually change the component on the sub-con Purchase Order &
-
So I want to sell music on iTunes from Viet Nam, and of course I don't have an US Tax ID. I'd love to know a way so I can start trying to sell music on iTunes store. Please help. Thank you so much. It's been the biggest issue and I'm stuck. Could you
-
I share a family plan and we each pay our share of the bill. We have our own My Verizon online profiles but my number is not the designated account owner. I wanted to know how to assign an account manager so I can tell the account owner how to do so
-
hi guru i am BI7 and used RSA1 transaction . i want only that user can see data but i don' want this user can't delete this request. best regard francoise