Blur Tool

Хотелось бы чтобы был blur? который лучше имитирует Tilt Shift. Подобный видел на альтернативном редакторе как линейный так и радиальный, суть его работы заключается в том, что выбрав резкий участок снимка внутренние границы и внешние на которых будет максимальное размытие. В итоге мы получаем наростающее размытие от 0 px до любого назаченного числа, например 15 px от резкого до совсем размытого. Классический приём использовать полупрозрачную маску, знаю, но всё-таки он не очень похож на растоящий эффект tilt shift, который можно использовать не только для иммитации tilt shift.
Пожалуй я очень хотел бы чтобы подобный blur инструмент был и Photoshop CS.

I have been having this problem with the blur tool in CS6 for a while also... Just to say (if you're still wondering) or for any others. After spending a long while reading through a lot of frustrating answers that didn't help me. I.e. 'it's just a very subtle tool' or the size of the image needs to be taken into account, "it's something about your video card', etc, etc... It may not be anything technical at all. (**I failed, so I'm not trying to insult anyone this applies to, just trying to help after not finding the answer myself and spending a lot of unnecessary time on what was a very simple fix.**)
Depending on how you think about it, the tool setting is counter intuitive:
THE SIMPLE ANSWER FOR DUMMIES >>> MAKE SURE THE TOOL HARDNESS IS SET TO ZERO

Similar Messages

  • Creative cloud photoshop blur tool not work as it should be

    creative cloud photoshop blur tool not work as it should be !
    I go to blur a painting i am doing and it does not blur enough and I am using wacom Intuos 5 med pen tablet.
    and I even set the tablets sensitivty for pressure lower then default and still not getting the blur tool to do its job.
    I even adjusted the brush settings too to be able to blur even more on hard settings, still nothing.
    at least it not bluring enough to see any major changes.
    the only way i can blur anything is by using the fliters blur or the brushes ( mixer brush ) settings to mix colors and do it that way.
    (note) I will not post my systems specs sorry I don't do that and even the tech from adobe said I do not have to. and so I wont !
    just need advise not to share system specs.
    and thats what this forums board is for getting advice and read what others say about the issue at hand.
    it's not to post or share system specs  !!!
    so with that out of the way I need advice only please ?

    Hi,
    It might be your image is too big in terms of pixel dimensions for the blur tool to work well.
    If you zoom to 100% do you see any change when using the blur tool?
    What are the pixel dimensions of the image?
    (Image>Image Size)
    If you try a small image, does the blur tool work?
    What about when you use the mouse instead of your tablet?
    Can you at least tell us what operating system and version of photoshop your using?

  • Blur Tool Problem - Random Lines (Adobe CC 2014.2.1 Release)

    Hi,
    I'm hoping that I haven't ticked some obscure option, but I have been using the Blur Tool in Photoshop CC for a while and after the most recent update have had issues with it - basically, when I try to use it to blur a specific area, it randomly goes all over the place (as if I'd grabbed the mouse and moved it rapidly in a random direction).  Obviously if I can't use the blur tool with precision (well, any tool really!) it makes it hard to work!
    Some interesting notes / observations:
    The sharpen tool works perfectly - only sharpens where I point it, which makes me think that it's not an issue with my mouse.  No other tools I use have the issue either - only the blur tool!!
    I have no other pointing devices plugged in (I had a pen tablet plugged in - long story, prefer the mouse over the tablet :-)) so it's not some other pointing device making noise.
    Has anyone else encountered this problem, and if so, how did you resolve it?
    Thanks - blurring and then going into the layer to delete the random lines of blur is getting tiresome - and it's not very precise either.
    Cheers,
    Terence.

    Check out this other thread I started
    http://feedback.photoshop.com/photoshop_family/topics/using-text-tool-freezes-photoshop-cc -2014-2-0-20140926-r-236-x64-release?utm_source=notification&utm_medium=email&utm_campaign =new_reply&utm_content=reply_button&reply[id]=14914157#reply_14914157
    There it's help there.  I've not totally solved my problem but others seemed to have.
    Richard

  • Blur Tool doesn't work properly in Photoshop CS6

    I like digital painting and just got a new Wacom Intuos. I wanted to finish a picture in PS C6 but everytime I use the blur tool it makes some weird edges, which it didn't make before!
    How can I fix it?

    The Layer seems to be empty and you don’t have »Sample All Layers« checked, so that seems strange.
    Another point, though: Why not apply the Layer Mask to the Group instead of applying it to each Layer individually?

  • Blur tool help

    Hello everytime I use the Blur tool it will only blur when I click on it and not when I hold down the mouse as I go around the image. This only happens in Photoshop CC 2014. But when I use Photoshop Elements 12 it works fine in the past update I hoped it was fixed, but it will still do this, sometimes it will work normally that is when I hold the mouse down the blur line will go along the image fine without me having to keep clicking the mouse button over and over. What is wrong is it a setting I can fix this with? I have defaulted the brushes and it will still do it. I sometimes end up just using Elements 12 which isn't as good as CC 2014 to me.

    I defaulted the setting so it would basically look the same.
    Meaning what exactly?

  • Help! Blur tool issues with Adobe CC/Windows 8/Wacom Bamboo Fun tablet

    Hi everyone, would really appreciate your help with something frustrating. I have been using Adobe CC quite happily since it was released, but after upgrading to a faster desktop that runs Windows 8, for some reason the Blur tool is playing up. I've upgraded drivers and cleared caches but it keeps happening sporadically. Sometimes it will work, sometimes it wont. My pc isn't the fastest in the world (ie not video editing speeds) but is perfectly competent to run Photoshop; I've run the program on slower machines and am used to the lag that happens there, so this is something different.
    What happens; the blur tool is slow, and inaccurate to the extent of being unusable. When I attempt to blur out a section, for example a section of background, it will instead blur out a totally different section of the photo, for example, the face of the subject.
    I use a Wacom Bamboo Fun tablet CTE 450; I have upgraded its drivers as well.
    Any suggestions would be greatly appreciated; this is only a small thing but is slowly driving me mad! I don't use the blur tool constantly so it isn't preventing me from doing anything, but it is handy when it works and extremely irritating when it won't!
    Thanks in advance!!

    Also adding; the same error happens when I use a mouse, which seems to indicate it isn't the tablet's fault.

  • Blur Tool in CS4 not working

    Blue Tool is not working in CS4 have no idea why.
    Maybe there is a setting that needs clearing? How to fix?

    It's a complex program.  Take some time to learn it.  The tools do very specific things, but they are just that - tools.  You need to learn how to use them well for the program to deliver its value.  Photoshop is not a program you can learn to use overnight.
    Making a selection then doing a gaussian blur does not blur the entire image.  Read what's written carefully, and if you don't understand something, look it up or ask here about it.  Someone will probably give step by step instructions:
    For example:
    1.  Activate the Polygonal Lasso tool in the Tools panel.
    2.  Set the Feather amount to a small value (0 or a few pixels) at the top of the Photoshop main window.
    3.  Click points all around what you want to blur.
    4.  Double click or return to the origin point to close the selection.
    5.  Choose Filter - Blur - Gaussian Blur, and dial in the amount of blur you want.
    Back to your original post - if you are not seeing screen updates with the Blur tool, it's possible your display driver is failing and you need to update it from the web site of the maker of your display card.
    -Noel

  • What is wrong with the Photoshop CC 2014 blur tool?

    What is wrong with the Photoshop CC 2014 blur tool?  It only blurs pixels of initial contact with the tool.  It does not blur any pixels that are swiped by the tool as you drag it across the screen.  Photoshop CS6 blur tool works just fine.  Togeling between two versions of Photoshop to get the work done is a drag!

    all my settings both in the Options Bar and the Brush Panel are the same whether in CS6, CC, or CC 2014.
    Let’s see the screenshots.
    Don't know how to post a screen shot
    Use the camera icon.

  • My Blur Tool is not working.

    Ive reset all tools, and still no luck, I cannot retouch skin without the Blur... is there anything short of uninstalling and reinstalling I can do?
    anyone that can help can reply to me personally at [email protected] please.

    Brush over some things that are sharp to ensure the effect isn't just to subtle to see on skin.
    Please post a screen grab showing the entire state of Photoshop at the moment it refuses to work.
    While it sounds like you have many things set right, given the sheer number of modal things that you can accidentally change and leave set in Photoshop that would cause a tool to appear not to function, there's always the possibility you've still got something set wrong.  A screen grab would help folks here see what you're doing more clearly.
    Also, what are the specific brush settings for the Blur Tool?  DO you have any of the dynamics turned on?
    Are you working on the appropriate layer?  Have the layer pixels selected, and not the mask?
    Got something selected elsewhere?
    Implied here is that the Blur Tool does work - I just tested it.  I also don't recall anyone else here on the forum in recent history claim the Blur Tool doesn't function.
    -Noel

  • Blur Tool Problem

    I am using Photoshop CS6 on Windows 8.  I can do photo editing, etc in Photoshop,
    but when I am using the blur tool to blur the background,  Photoshop stops working
    and closes down.  I open back up.. work on the blur again, little and save, do little more
    and save but soon, it stops working again and closes down.
      What is causing he program to just stop working and close down??
    So far everything else seems to be working fine witht he program..
    thanks
    Barbara
    Message was edited by: Mamacat104

    Is Photoshop up to date? http://adobe.ly/PS-Up-To-Date

  • Blur tool results seen only in palatte bin

    I am new at Photoshop.
    I have Elements 7, Windows 7.
    When working with the blur tool, I see no change to my photograph.  However I do see changes on the layer thumbnail in the palatte bin.  What am I missing?  It worked for a previous photo, but not with a new one I opened up.

    HistoricalNutrition,
    The blur tool is generally ineffective, as I see it.
    If you need to blur the background, yet keep the foreground in focus, try the following:
    Open picture file
    Duplicate background layer
    Apply Gaussian blur to the background copy layer. This will blur everything. Not to worry, we'll fix it.
    Place a levels adjustment layer between the background and background copy layers.
    Clip the background copy layer and the adjustment layer - Layer>create clipping mask
    Left click the mask (the white rectangle)
    Use a black brush to bring the foreground back into focus. If you go too far, correct with a white brush
    http://www.pixentral.com/show.php?picture=1JCdJrZTXS9taljAdXxrg6APGQGB
    In this example, I have masked the blurred bricks in order to allow the "sharp" bricks to show.

  • Blur tool acting strangely

    PS CC 2014
    I am trying to use the Blur tool to soften some faces.  I duplicate the image first and work on the duplicate.  I think all my settings are normal.
    When I try to draw on a specific area (just one click, or one click-and-drag), other areas of the photo are also affected, in addition to the area just under the brush.
    What's wrong?

    Anytime a tool is acting strangely, I would suggest resetting it.
    Select your tool. Right click on its' icon on the top Options bar.
    Screenshot example is the Type Tool, but this should explain it.

  • Blur tool is gone

    I am new here and to CS5 and also am not much of a computer wiz. The blur tool has mysteriously disappeared from my palette and I don't know how to get it back. Help.
    Bob

    There are actually several tools in most positions in the tools palette.
    Click and hold on the Sharpen or Smudge tool, and a fly out menu will be displayed after a second or so.  You should be able to activate the Blur tool then.
    -Noel

  • Blur tool has disappeared

    I was using my blur tool the other day and today it has vanished.  How do I get it back in my tool bar?  I am using CS4.

    I don't think you can even take it off the bar?
    You sure you don't have the Sharpen or Smudge tool showing as selected? Sorry if this seems really basic. Doesn't mean to be.
    Brad Lawryk
    Community Expert: Dreamweaver
    Usergroup Manager: Northern British Columbia Adobe Usersgroup

  • Blur Tool Inop.

    I  have not had use of my blur tool for weeks in PSE10... Can anyone tell me how to get it operating? All other tools work fine. Regardless of the strength and brush I use I have no blur tool.  HELP!??? Please!

    I'd first try a reset of the Blur Tool by clicking on the small white downturned triangle and choosing Reset Tool

Maybe you are looking for

  • What determines the price and tax for consignment stock?

    Hi All, anyone knows how the price and tax are calculated for consignment stock? in other word, among the info record , contract or material master, what determines the price and the tax calculation for consignment stock? please advise, your input wi

  • Decimal to Binary

    Hi, Can we convert decimal values stored in a column to binary using select statement? Has Oracle 10g any built-in function that supports such conversions.

  • ENABLE NOVALIDATE CONSTRAINT SYNTAX

    Hi, I have a table it's called loadsurvey which having some duplicate records. I would like to implement unique constraint on my table using following command which should not allow any new duplicate record into table and do not wants to validate exi

  • Query to include payment status cash / cheque for payment received.

    Hi, We would like to amend the following query such that a user can select incoming payments received in cash or by cheque, with the total value of payment made. SELECT T1.CardCode, T1.CardName,T3.SlpName, T0.DocDate as 'Posting Date', T0.DocNum as '

  • Debit memo request with reference to the credit memo request

    Dear SD Consultants, I have a business scenario in which I create a credit memo request with reference to a debit memo request but the problem is that ,i can create many debit memo requests with reference to the same credit memo request even if the a