BluRay burn... HELP!!! C++ runtime error

Hey Adobe family. miss you guys!!! Hope everyone has been well....
Finally got my new vista 64bit system running with CS4.
it's my first time burning a bluray. I have a .m2v and an .ac3 file in my Encore project... I'm using a new LG burner...
Encore finally finished the encoding nesscary...(6 hours for the 25 minute film I have) (which created the .m2v file and the .ac3 file)
and then I got the C++ runtime error crash...
now every time I hit "Build" I get the same C++ Runtime error message...... It starts to burn.... this last time it got up to 1GB "written to disc".... then BAM!!!! C++ runtime error message....
Been at this now for 18 hours....
HELP!!!!!!!!!!!!!!!!!!!!!!!!
it's a 25 minute filme 1920x1080
Mike

I having same issue. Here is some additional Windows log files. It was mentioned that this may be a Vista 64 bit issue and someone has a work around. Can someone provide a path to this individual please!
Thanks So Much!
System Specs
Case: Coolmaster-830
Op System: Vista Ultima 64 Bit updates done on 08/18/2009
Edit Suite: Adobe Creative Suite 4 Production Premium Line Upgrade
Adobe Premiere Pro CS 4.1 update before installing RT.X2 Card and 4.1 tools
Performed updates on all Adobe Production Premium Products as of 08/18/2009
Matrox RTX2 4.1 Tools
Main Display: Dell 3007 30"
DVI Monitor: Dell 2408WFP 24"
MB: ASUS P5E3 Deluxe/WiFi-AP LGA 775 Intel X38
Display Card: SAPPHIRE Radeon HD 4870 512MB GDDR5 Toxic ver.
PS: Corsair|CMPSU-1000HX 1000W
CPU: INTEL Quad Core Q9650 3G
MEM: 2Gx4|Corsair TW3X4G1333C9DHXR DDR3 (8 Gigs Total)
1 Sys Drive: Seagate Barracuda 7200.11 500GB 7200 RPM 32MB
Cache SATA 3.0Gb/s
2 Raid 0: Seagate Barracuda 7200.11 500GB 7200 RPM 32MB Cache SATA 3.0Gb/s Using Intel's integrared Raid Controller on MB
Error Information
8/19/2009 3:30 PM Application Error Faulting application Adobe Encore.exe, version 4.0.1.48, time stamp 0x491b1fb3, faulting module MSVCR80.dll, version 8.0.50727.3053, time stamp 0x4889d619, exception code 0x40000015, fault offset 0x000046b4, process id 0x176c, application start time 0x01ca20ddd26a0ca2.
8/19/2009 3:45 PM Windows Error Reporting Fault bucket 274538919, type 5
Event Name: RADAR_PRE_LEAK_WOW64
Response: None
Cab Id: 0

Problem signature:
P1: PProHeadless.exe
P2: 0.0.0.0
P3: 6.0.6001.2.1.0
P4: 
P5: 
P6: 
P7: 
P8: 
P9: 
P10: 

Attached files:
C:\Users\Jeff\AppData\Local\Temp\RDRBB15.tmp\empty.txt&#x00 0a;
These files may be available here:

Encore Information
System: Professional, Service Pack 1 (Build 6001)
System Architecture:
    Cpu 0: Intel(R) Core(TM)2 Quad CPU    Q9650 @ 3.00GHz
    Cpu 1: Intel(R) Core(TM)2 Quad CPU    Q9650 @ 3.00GHz
    Cpu 2: Intel(R) Core(TM)2 Quad CPU    Q9650 @ 3.00GHz
    Cpu 3: Intel(R) Core(TM)2 Quad CPU    Q9650 @ 3.00GHz
    Total Physical Memory: 4095 MB
Adobe Encore Serial Number: [deleted by moderator]
Product Version: 4.0.1.048
Premiere Media Layer Version: --
Blu-ray Devices Installed:
     HL-DT-ST BD-RE GGW-H20L (Firmware YL04)
DVD Devices Installed:
     HL-DT-ST BD-RE GGW-H20L (Firmware YL04)
DLT Devices Installed:
    None

Similar Messages

Need help in runtime error

I try to run the ausp dbtable.
with entries of object: 00001019680 and more that 1300 entries
Inter char. sr_code
classtype: z01
the problem is display in a short dump with this message
There is no help text for this runtime error either the text was inadvertently deleted or the release of the kernel differs from that of that of the database.
Thanks.
I hope you could help me. I need it urgent

Hi rhym,
Thta soounds like a memory issue to me. At least that is what causes that to happen to me.
The 'slice' of data you are requesting, based on your criteria, may be more mega bytes than the memory buffer. Too much data perhaps.
When this happens to me I have to take smaller chuncks of data, multiple extractions, then paste them all together.
Try half the number of entries, and see.
RS

HELP NEEDED RUNTIME ERROR

x
emac Mac OS X (10.3.9)
im tryin to access my myspace profile. ive done it before on my mac no probs. all of a sudden when i try and get to my profile come up with runtime error message
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.
Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag sh
ould then have its "mode" attribute set to "Off".
i phoned the helpline absolutely no help told me i need to pay for there help... does someone know what i can do plz

If the same problem happens in another browser, the problem is a Network issue. Have you contacted your ISP?
Also, you may find relief via Terminal (found in your Utility folder) : Once the Terminal screen is open enter (copy/paste) lookupd -flushcache and press return. This clears out the DNS cache. Once done, quit Terminal. Restart the computer, then try Safari. Post back and let me know how you make out.
iMac G5 Rev C 20" 2.5gb RAM 250 gb HD/iBook G4 1.33 ghz 1.5gb RAM 40 gb HD Mac OS X (10.4.8) LaCie 160gb d2 HD Canon i960 printer

F4 help throws runtime error CREATE_DATA_UNKNOWN_TYPE   in IC webclient

Hi All
I am facing runtime error while clicking on f4 help in IC webclient.
<crmic:inputField id               = "IfAddPartnerId"
                        width            = "100%"
                        maxlength        = "12"
                        value            = "//Partner/PARTNER_ID_ADD"
                        helpId           = "CRM_VENDOR_NUMBER"
                        helpInputFields = "IfAddPartnerId=VENDOR_NUMBER;\'<%=
                            AdminI->GET_GUID( attribute_path = '' ) %>\'=GUID;\'<%=
                            AdminI->GET_ORDERED_PROD( attribute_path = '' ) %>\'=ORDERED_PROD"
                        helpOutputFields = "IfAddPartnerId=VENDOR_NUMBER"
                        disabled         = "<%= lv_add_disabled %>"
                        tooltip          = "<%= otr(crm_ic_appl/bupaaccount) %>" />
I can see in debugging that control is going to search help FM : CRM_VENDOR_NUMBER_SHLP_EXIT
Search help id is : CRM_VENDOR_NUMBER.
Exception CREATE_DATA_UNKNOWN_TYPE is being thrown in the SET_TABLE_VALUES method of the class : CL_CRM_IC_F4_HELP (line 18) . I feel that GV_VIEWNAME is not initialized till this point.
Can anybody please help me to remove the error.
Best Regards
Bhavishya

Hi,
Please let me know the BBPCRM package level.
Feel free to revert back.
--Ragu

NEED HELP WITH RUNTIME ERROR!

I have recently formated my laptop and installed Adobe Reader. Every time I try to open a .pdf I get the message below:
Runtime Error!
Program: c:\program files\adobe\reader 9.0\readeacroRd32.exe
This application has requested the Runtime to terminate it in an unusual way. Please contact the applications support team for more information.
I always click to report it to windows but there is no link to fix this issue. What can I do?
Thanks.

That hotfix applies to XPSP2. Is that what you've installed? If so,
you should probably upgrade to SP3, which includes a later version
of that and many other msvc files. If you're not using XP, then
that's not the solution.
Noel

Need help with Runtime error! Can't find "MediaDatabase" file! Folders are visible!

Hi, I have been searching a lot for an answer to this issue. Elements keeps crashing after about five minuets and giving me "Microsoft Visual C++ Runtime Library" "Runtime Error!" "R6025 - pure virtual function call". I am running Premiere Elements 9.0 on windows 8.1 and I am trying to
rebuild the "mediadatabase.db3" file, but cannot find it. I made my hidden folders visible, and followed the pathway, but I only get this. I have searched and searched but I can't find anything about windows 8.1. Only 7 and vista. Thanks in advance!

Look for a line that resembles the following in the
actionscript of the Flash fla files... It is likely to be in the
first frame's code, but may not be.
xmlData.load("teamTSI_en.xml");
the '
xmlData' part of that is not likely to be the same as what's
in your file, it's a variable so it could be anything, and the file
names will be whatever your xml files are.
If you can post that line of code from each of the fla files,
someone may be able to tell you where you need to place the xml
files.

Help! Runtime error after Lightroom 1.1 install!

I installed v1.1 on a Win XP machine and now when I try to launch Lightroom I get only a message box:
"Microsoft Visual C++ Runtime Library"
"Runtime error!
"Program: ...Files\Adobe\Adobe Photoshop Lightroom 1.1\lightroom.exe
"This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information."
I tried going back to a previous Windows restore point, but Lightroom 1.0 wouldn't run from there either!
What do I do?

I had LR 1.0 working fine on my XP Pro machine - then I had a HD crash. On installing new & larger HD's (I had backups of all data/photos, etc) I set aside 1 of the new 500GB HD's just for photos and another drive just for my photo software applications.
I installed LR 1.1 this morning and received the runtime error.
A call to tech support and about 15 minutes of excellent Adobe support service solved the problem.
I had my .LRCAT file on the Photo HD and not in the My Pictures folder on my C:\ where it was looking for it.
The solution involved starting LR 1.1 and holding the Ctrl key down (I did mention it's a windows machine) This brought up a prompt panel that let me direct LR 1.1 to where the .LRCAT was located.
Problem Solved! Adobe support (I think the technicians name was Dave) worked just the way you would expect it to and my day became a lot brighter.
Art Guertin

Not a developer but need help with runtime error, please

Hi, I have downloaded a game called Fishdom, but it will not open. I get a " The application has requested the Runtime to terminate it in an unusual way" error message. The dialog box is labeled "Microsoft Visual C++ Runtime Library".
I checked my programs and I have C++ '05, '08, and 2010. I am using XP SP3. I don't get this error at any other time.
I have asked Playrix (game distributor) about it and they seem relatively clueless about how to fix it. So, is there anything I can do to fix this error, or bypass the error so that the game will load? I've tried deleting and reinstalling the libraries and
that did not help.
Anything you can suggest will be very helpful, because I do want the game and do not want to argue with them about refunding my money for it.

Hi CatsinQ,
Thank you posting in MSDN forum.
According to your description, could you please tell us when you installed the
Microsoft Visual C++ Runtime Library if there have any install errors?
If you can install the Microsoft Visual C++ Runtime Library successfully, I think that the issue is more related to the game. Therefore, I suggest you can ask the issue to Playrix
(game distributor), maybe it will better help you.
In addition, since the
Visual Studio General
Forum which discuss Visual Studio the VS IDE issue, so I suggest you can try Brian’s suggestion.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

Runtime Error, please help!

Hi,
I have installed the cs3 master collection on a new system (quad 2,4 ghz, 4GB ram, quadro fx1300, WIN XP 64bit, cineform aspect hd 5).
I opened a big ppro project which has been created with cs2 (i deleted all preview and cache files before). I saved the project to a different name.
Project structure:
65 Scenes embedded in Sequences embedded in a master sequence (master lenght: 110 Minutes).
The big Problem is:
When i click anywhere into the master sequence timeline, a "premiere pro debug event" error appears:
"[..\..\Src\AudioRender\AudioRenderContextConstructor.cpp-110]"
Premiere dissapears after i click "continue".
When i turn off the mastersequence audiotracks, this error does not show up.
And everything works fine when i go into an embedded sequence.
ALSO:
When i want to render some area in the timeline, Premiere wants to render the audio first. It hangs up at about 50 percent (always at the same point, but it is not possible to locate it) with the error message:
"Microsoft Visual C++ Runtime Library
Runtime Error!
Premiere Path..
This application has requested the runtime to terminate..."
Premiere dissaper after i click "ok"..
I tried:
To get this bugfix from Micrsoft, which should help with runtime errors, but they dont respond.
To install the Visual C++ runtime environment again.
To deactivate all unnecessary startup programs
To run ppro in compatibility mode
To change sound settings in and out of ppro
The event viewer description for this error:
"...faulting module msvcr80.dll..."
Please help me, if there is a solution..
David

Considering ppro´s memory managing problems with big projects i dont want to revert to 32bit.
I installed ppro cs2 and it works fine. And the memory problems i had with 32bit (even with 3gb switch on) are gone.
I dont have time to test now if the problem with cs3 was only caused by the imported cs2 project. I will post it next days.

Runtime error in starting Lightroom

I receive the following message when I try to start Lightroom:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program:...Files\Adobe\Adobe Photoshop Lightroom 1.2\lightroom.exe
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
Lightroom ran well for several days and then failed to open with the above message.
I have tried everything I know to do (uninstalled and reinstalled the application, restored the computer to a restore point before Lightroom was originally installed, etc.) and do not know were to go from here. Suggestions would be appreciated.
I am using Windows XP sp2 and have 4 GB of ram and 250 GB of hard disk space.
Thanks,
Cliff Culp

Aha! A fix! Please look at this...
http://www.adobeforums.com/cgi-bin
bob frost, "Help! Runtime error after Lightroom 1.1 install!" #10, 27 Jun 2007 6:54 am

Runtime error in CRMD_SALES_MASS transaction

Hi Gurus,
I have to enhance the transaction CRMD_SALES_MASS to add few custom fields to it.
I am trying to execute the transaction but I keep getting a runtime error in a standard Function Module CRM_SALESORDER_MASS_SELECT that is meant for the MASS Transaction. I have gone through many notes but I could not find anything which is relevant. Please help me with this! Please find the below dump if it can help.
Runtime Errors         CREATE_DATA_UNKNOWN_TYPE
Except.                CX_SY_CREATE_DATA_ERROR
Date and Time          09.12.2010 05:11:12
Short text
    CREATE DATA: The specified type "CRMT_SALESORD_MASSUPDATE_ITEM
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLCRM_SALES_MASS_UPDATE" had to be terminated
     because it has
    come across a statement that unfortunately cannot be executed.

Hi Nisha,
Thanks for the reply.
I got to know the issue with the function module before I saw the reply. It has something to do with the type that is used in CREATE DATA statement. The statement at line 51 should have been as below
CREATE DATA ls_selecttable_ref type (tabname-name).
but the type mentioned tabname in standard FM is a structure of type MASSTABLESTAB.
Now I have another question. If we are to implement MASS transaction for Service contracts in CRM how are we supposed to do it? I am talking about SAP GUI and not the WebUI here.
Regards,
Mahesh

SAP Runtime error when expanding menu in SE43

Hi,
I receive a runtime error after 10 clicks while expanding menu in SE43. Even when expanding the tree in se43 the system issues a warning saying not all will be expanded. Why this happened.
Kindly help.
Runtime Error: TABLE_INVALID_INDEX
Thanks & Best Regards.

Hi,
I receive a runtime error after 10 clicks while expanding menu in SE43. Even when expanding the tree in se43 the system issues a warning saying not all will be expanded. Why this happened.
Kindly help.
Runtime Error: TABLE_INVALID_INDEX
Thanks & Best Regards.

URGENT HELP PLEASE - portal error

I am getting an error when I tried to preview the IVIEW i created. Please help
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Could not find portal application .
Exception id: 03:30_15/02/07_0035_7139250
See the details for the exception ID in the log file
Thanks in advance

Hi Mithun,
This problem can occur due to following reasons:
<b>1. You are not authorized to see this iView</b>
If you are not authorized to view this iView it will show this runtime error. Some iViews may redirect you to login server. Please set appropriate Role to the user on SAP Enterprise Portal.
<b>2. The SAP Enterprise Portal session is lost</b>
If your session is lost, please logout of Portal and Login again. This will re-establish the SAP Enterprise Portal session and will be able to get the iView content.
Thanks,
Vinay

Runtime Error C R034

I installed Photoshop CC and have been getting this error. I have CS5 running without any problem, as well as Lightroom 5. I get about 8 of these as CC starts. Plugins include Nik, most Topaz, and OnOne suite. I have uninstalled and reinstalled each.

See if this helps:
Re: Runtime Error R6034

Encore CS5 Runtime Error & crashes - HELP!

Hi everyone
I have installed Encore CS5 with Premiere Pro CS5 and used it to successfully burn a DVD. Today however, when I complete the New Project tab with the name & location/project settings and click OK, there is a pause of about 3 seconds and then a pop up box:
Runtime Error! Program: C:\...
This application has requested the Runtime to terminate it in am unusual way.
Please contact the application's support team for more information.
I have looked through the forums etc and the only possible solution was to turn off DLA, but i cannot see how to do this in Windows 7.
If anyone can help I would be most greatful, I don't see why I was able to burn a DVD without this problem last time.
Thanks!

I know this is an old thread, but I've been getting this recently and managed to find a solution.
Just for future reference this what I did, though not sure exactly which fixed it!..
I uninstalled Encore CS5
I also uninstalled some software related to the LG Bluray writer I had installed:
Cyberlink Power2Go
Cyberlink PowerStarter
Cyberlink LabelPrint
Cyberlink PowerProducer.
2 other programs I uninstalled: (less likely to cause a problem, but I was not using them)
Google Earth
ArcScan stitch-delux
Reboot
Use CCleaner to clean registry.
Disconnect internet
Disable Mcafee virus scan
Reinstall Encore CS5... then it all seemed to work ok, could create new projects etc.
My PC is running Windows 7 32bit. The LG writer is a BH10LS30

BluRay burn... HELP!!! C++ runtime error

Similar Messages

Maybe you are looking for