Blurred image of hit and run truck

Hi everybody,
This isn’t your regular community topic discussion but I’m hoping someone out there can help me with a blurred image.  The picture is of the truck that scraped up the back of my Honda and then ran off—a hit and run.  Fortunately no one was hurt and I was able to get a picture of the person after a bit of a chase, but upon looking at the picture it’s so blurred I can’t get a clear license plate or even the first few letters/numbers to report the hit and run.
ANY and ALL help is so appreciated.  I’m more upset that the person didn’t have the decency to stop after knowing she/he had hit my car.  It’s quite disheartening that some people have no respect for other’s property.
Thank you in advance = )
-M.R.

You might try FocusMagic (www.focusmagic.com). The picture is probably too much for it to handle and it apears to be rather small to pull out the license number, but I believe you can run it in demonstration mode, without purchase, to see if it makes enough of an improvement. It has been awhile since I purchased it and don't remember about "demo mode".
It does reduce motion blur and you can adjust the direction of movement adjustment as well as the amount. There is a preview window. Be sure to work on a copy of the original file.
Best of luck.
Bill

Similar Messages

  • Photo Book: Blur images in A3 and in a PDF

    Hi everyone,
    I'm making a photobook in A3, and I have a problem in it.
    My pictures are in high-resolution. When I import them in my photobook, they become very blur, and it's the same things when I export my book as PDF in order to have a preview.
    I don't know how to resolv this problem, if it's a bug from A3 or something else, but I'm affraid to order the book and to have a bad suprise when I will receive it.
    Jonathan

    Something strange: when I make a photobook in size XL, photos are perfect when I export as PDF.
    But I want to do it in size L, and when I export my book as PDF in size L, photos are really bad quality...
    I don't understand.
    Do we have to resize photos before insert them in the photobook? But there are différent size in a book, depending where we want to put photos (small square, full page...)

  • Simpsons Hit 'n Run - Is it out for PSN?? Or will it be in the future??

    I used to play it on PS2 back i the day and i'm sure you did too. I was wondering if it;s out on PSN?? Or if anyone knows if it will be comin gout in the near future?? Cheers  

    The Simpsons hit and run is one of the best games I have ever played and i would adore it if it was put on the play station store because it would make me feel like an eight year old again.  I would pay good money for this game at least eight or nine pounds maby ten and im sure lots of other people would too. So if I may ask again please may you put the Simpsons hit and run on the play station store. 

  • When I have finished working on an image in Photoshop and I hit the save button it goes instead to the "save as" screen. This never happened in previous Photoshop versions. When I get to Lightroom, I have a grey screen the says "File could not be found."

    When I have finished working on an image in Photoshop and I hit the "save" button, it goes instead to the "save as" screen. This never happened in previous Photoshop versions. When I get to Lightroom, I have a grey screen the says "File could not be found." I then have to go to "locate" to get the image. When I select the correct image, I get a message that it is not the same file name but I am eventually able to access the image. Needless to say this is having a negative impact on workflow!

    The problem with write permissions for the OneDrive folder only shows up in Lightroom 6's export dialogue, that's why it's to irritating. Lightroom 5.7.1 is not having that problem nor does the file explorer. The problem also exists on both of my machines. I will try to check for other problems with the OneDrive troubleshooter though: Running the OneDrive troubleshooter - Windows Help   

  • Creating that blur using my brush my entire image changes too and becomes blurry. Not only that but the area I painted also becomes over exposed. What can I do am I missing something here all I want is to blur a section and not change the rest of the area

    Creating that blur using my brush. When I paint the area, which highlights in red, I bring the clarity down to create more of that blur but what ends up happening is that my entire image changes too and becomes blurry. Not only that but the area I painted also becomes over exposed. What can I do am I missing something here all I want is to blur a section and not change the rest of the area I am painted by automatically becoming over exposed. Does anyone else have this problem that can help me?

    Quote
    Do you think I should try to find a cheap mobo to OC my current CPU?  How about trying to find one (mobo) used?  I fear that my only realistic choice will be to scrap the CPU and eventually buy a new mobo and CPU, but as the CPU was only released just under two years ago I would value being over to overclock it with a cheap enough mobo to last me another year or so.
    Who knows what additional problems may be run into by switching mainboards & such. The OS would have to be reinstalled fresh, etc. Money wise, it wouldn't make a lot of sense to invest more into a system that is rather outdated. The small performance gain making the switch to another board using the CPU you have, just doesn't really make much sense, especially if what you have now is completing the tasks asked of it. Save up some money, set it aside for a future build. There are plenty of new platforms in the works.

  • Is it possible to make an image of a MBP, and run it as a virtual machine?

    Is it possible to create an image of an exitsting MBP, transfer the image to another system or server, and run that image as a virtual machine?  If so, how?
    Thank you

    Mac OS X will not run in a virtual machine, except as 10.6 Server:
    https://discussions.apple.com/docs/DOC-6841

  • .VOB Editing S/w to add jpeg images to the .vob video file and run in a loop

    hi,
    I have 2 .vob files with me which i need to run in a loop seperately on the plazma screens. In addition to it, in one of the video (.vob) files I have to add some jpeg pictures at the end and make the video looping. I have tried a lot but could not find any relevant software to do so Any ideas??? I am kind of new to this video editing thing... i tried to convert it into avi or mpeg formats but in that case when i call it in other program like flash the dimension and resolution on full screen mode gets distorted.
    Please let me know how can I edit this .vob file and integrate images to it and make it rum in a loop.
    Regards,
    Vandee

    Frequently answered question
    Cheers
    Eddie
    Forum FAQ
    Premiere Pro Wiki
    - Over 250 frequently answered questions
    - Over 100 free tutorials
    - Maintained by editors like
    you

  • Save as pdf/image does not work. It runs and runs ... Getting no output

    In APEX 4.0 i have several Charts (Version 5.1.3).
    If i try to save them to PDF or to an image file the request runs and runs and don't come back with a result.
    Any ideas?
    Regards
    Stephan

    Hi Hillary,
    i can choose the file name and the destination for the PDF and when i confirm with the save button the page shows "Saving ..." and nothing happens.
    In the target destination i see that there is a file (FlashTmp0.tmp) with ~ 2.49 KB.
    I copied the page with chart to a new one but i have the same problem with it.
    But wait. I opened this FlashTmp0.tmp file and i saw that there is a attempt to access anychart.com which is denied by our firewall.
    Will the PDF be generated by the anychart.com page?
    And what i also established is when i delete some conditions in my SQL query the creation of the pdf works. F.e. in dial chart i have this query which works with pdf if i comment out the last (or more) line(s):
    SELECT COUNT (*) VALUE, 300 MAX, 50 LOW, 300 HIGH
    FROM plm61prod.t_pro_dat
    WHERE typ = 'CAL'
    AND entwk_erpppty >= TO_DATE ('2009-01-01', 'YYYY-MM-DD')
    AND REGEXP_INSTR (
    UPPER (sp_nummer),
    'A') = 0
    AND t_pro_dat.cur_flag = 'y'
    /*AND TO_CHAR (entwk_erpppty, 'YYYY') = TO_CHAR(SYSDATE,'YYYY')*/
    Regards
    Stephan

  • I have an abundant amount of images on my iPad and iMac and running out of storage space.  Where or what device can store these images for the least amount of money?

    I have an abundant amount of images on my iPad and iMac and running out of storage space.  Where or what device can store these images for the least amount of money?

    I would suggest
    http://www.lacie.com/fr/wheretobuy/index.htm
    LaCie Rugged Mini                            

  • When PC System timing hits 0000hrs Loops back to start and runs again using Loop function?

    When PC System timing hits 0000hrs Loops back to start and runs again using Loop function?

    It's all described in the help for it. Vista version:
    Attachments:
    Task Scheduler.png ‏61 KB

  • Reader 11.0.4 displays double/blurred image. I just uninstalled and reinstalled. Windows 7 64-bit

    Reader XI 11.0.4 displays a double/blurred image. I just uninstalled and reinstalled the software. Windows 7 64-bit

    Is that for any PDF, or just a specific one?  Can you share that PDF?

  • Iphone 6 128 camera freezes...sometimes with a blurred image and sometimes just freezes black.  I have to reboot phone to get past the frozen camera screen.  It happens several times a day.

    I go to take a photo and the camera either shows repetitive blurred image or is just black.   The entire iPhone 6 128 is locked in the camera freeze.  The only way to use the phone is to shut off power and reboot.  Is anyone having this problem on the iPhone 6?

    i have been having the same problem today. I have however narrowed it down further: when I am zoooming in on a shot, take the shot, then slide to another mode like from a still shot to video  (without uzooming),= freezing. I am taking my iPhone back to apple to see what they say if I don't an answer on the forums here. Not happy with this btw!

  • SolidWorks x64 Edition up and running on Mac Pro

    I have the 64-bit version of Solidworks running on my Mac Pro and it's a screamer!
    I used Solidworks 2007 x64 Edition on Windows XP x64 Professional on my Mac Pro for a solid 3 hours today at work. I had no problems other than a slow SATA hard-drive issue that is well known and remains unfixed on my machine. However, once Windows has loaded the registry with the program guts it runs like a top, just don't expect it to load up a program for the first time blazingly fast and you'll be fine.
    Be that as it may, even with all the hardware issues I still have, SolidWorks is AWESOME on the Mac Pro, even better than any other Intel boxes I've used previously. To be fair, I don't have any experience with SW 2007 x64 on real XP x64 box.
    (I posted this on another thread earlier, but at the time I didn't know what I was doing. I felt this information would be of better use under this category.)
    For those who want to do this and run the x64 version of XP here's the drivers and the drill:
    My Windows software is sourced from a free download of x64 120 day trial version from Windows.
    Interestingly enough, I called Microsoft and asked what happens after 120 days, the answer was...."I don't know"...
    weird.
    Anyway, for those who don't know how to get the format of the download file to be correct for Boot Camp to recognize it as a Windows CD, here's the procedure.
    This is all done on the Mac Pro.
    1. Download XPx64 from: http://www.microsoft.com/windowsxp/64bit/facts/trial.mspx
    2. Open Disk Utility
    2. Double click downloaded file: WS03SP1RTM_1830_PX6EN.iso (this will allow you to see it in Disk Utility)
    3. In Disk Utility select the WS0...EN.iso file mentioned previously and click the "convert" button.
    4. When the "Save as" box pops up set the location to wherever you want ( I named the file the same name w/o the .iso extension and put it on my desktop) and set the Image Format to "DVD/CD master", Encryption to "none"
    5. After saving the file, it will show up with a new extension *.cdr. Double click this file in the Disk Utility drive list.
    6. After Finder finishes launching the file, go back to Disk Utility and select your new *.cdr file and click the Partition button to the right.
    7. Once in the partition window, select Options and set the partition scheme to "Master Boot Record", hit OK.
    8. After getting back in the partition window, select Volume Scheme and set to "1 partition", The size should be around 558.62 MB (don't worry about the format set to mac OS extended and the other greyed functions)
    9. Select the Burn icon, insert your CD-R, set your post burning options, and have a Coke and a smile. Verify the file format is ISO 9660 file system by selecting the "get info" on the CD under "Finder".
    **TIP #1 - make sure you've printed out the e-mail from Microsoft outlining the setup instructions and including the CD-Key. Don't be like me and get 98% through the Windows setup where it asks you for CD-Key and have to power off the computer and get it out of OS X.**
    **TIP #2 - Since you are using an Apple keyboard Windows doesn't seem to be able to use it on the blue screen portion of the install. My remedy (after assuming the install locked up 6 times in a row) is to go find a cheap-o usb keyboard and mouse lying around (probably standard Microsoft stuff in your closet) and plug it in to be back of your Mac Pro tower. You do not need to go through the Mac OS hardware setup thing that pops up.
    10. After printing out your MS instruction e-mail and plugging in your keyboard and mouse (see above), launch Boot Camp (don't even try to use the driver CD it makes, it's useless for XP x64) and install XP x64.
    11. Have a beer and a smile, you will need the alcohol in your blood from here on out.
    **TIP #3 - go buy 2 or 3 magazines and get a comfortable chair.**
    12. Install Windows, follow the Boot Camp Beta instructions carefully until you get to the part where you install the driver CD. It won't work.
    13. Follow these links to get the x64 drivers:
    Audio: http://www.realtek.com.tw/downloads/dlhd-2.aspx?lineid=2004052&famid=2004052&ser ies=2004061&Software=True&title=HD%20Audio%20CODECs
    Nvidia Graphics driver for the 7300GT (remember, this is for Win XP x64 edition so it's not the same as the regularly posted 32 bit version):
    http://www.nvidia.com/object/winxp64_91.47.html
    LAN drivers (Be sure to get the x64 version):
    Download PROEM64T.exe from the Intel website
    13. Update Windows.
    **NOTE: I am still having the same driver issues as others that have installed XP x64 on a Mac Pro, for example the Apple keyboard and mouse function, but the CtlAltDel and Eject CD disk remain non functional.**
    14. Install SolidWorks 2007 x64 from the included DVD in your software update box that came in the mail last week.
    15. GO TO BED...IT'S 4:30 am!!!
    Mac Pro   Mac OS X (10.4.7)   Microsoft XP x64 Professional
    Please correct me on any driver postings if they are in error or missing. These are the ones I used and they are working for me. I do not claim to be a guru (this is only my 7th day of using Macintosh in my entire life), I'm just a CAD guy that has a MacNut for a boss. It was either adapt or die, so I'm hapilly adapted.
    Mac Pro   Mac OS X (10.4.7)   Microsoft XP x64 Professional

    Alright CT, here's the deal.
    You'll need to update windows first, they have the HD USB audio device driver update on Windows Update. After this, install the RealTek driver you downloaded earlier. Don't worry about windows saying it found a device but can't find the driver for it, that'll be fixed when you run the Realtek install program.
    As far as the broken stuff in Device Manager, it's the usual stuff everyone has (be sure to go to "view", "show hidden devices" to see all the stuff) :
    -USB human interface device
    -Other device
    -unknown device x3 (you will note there is also one unknown device on the Mac os)
    -Intel(R) 5000 Series Chipset PCI Express x4 (Port 3 thru Port7)
    As far as performance goes, BIG IMPROVEMENT! I did the slipstream fix using the 64bit drivers (obviously) and found out the hard way that you do infact have to use Boot Camp and delete and recreate the partition for a reinstall.
    (tried to install on top of existing installation twice...failed twice. Suck!)
    I used the picture guide located at:
    http://st118.startlogic.com/~macproxp/index.html
    I don't understand all the super-geek evaluation stuff when using the recommended evaluation SiSoftware Sandra, but it looks like the drive is listed as a:
    ST3250824AS (P)ATA
    I thought this driver was supposed to turn it into a SATA drive. Maybe it did and I'm just an idiot. So, I downloaded HD tune (give me a chart anyday over a bunch of gobbledy-gook numbers & letters) and installed it.
    Here are the numbers after making about 40 copies of a 59.8 MB file on the desktop to the desktop (to try and tax the processor/hd):
    HD Tune: ST3250824AS P Benchmark
    Transfer Rate Minimum : 0.6 MB/sec
    Transfer Rate Maximum : 66.9 MB/sec
    Transfer Rate Average : 20.2 MB/sec
    Access Time : 13.0 ms
    Burst Rate : 152.4 MB/sec
    CPU Usage : 1.5%
    This is no where close to 3GB/sec, but a helluva lot faster than 35KB/sec like before, pretty dang fast nonetheless.
    Hopefull someone smarter that me can figure out if I'm at the fastest I can go or not.
    -MSW

  • HP Color LaserJet CP1515n - Out of alignment, ghosting or blurred image.

    Dear Sir/Madam,
    I hope someone, possibly a member of HP staff is able to provide a solution for a problem with a Color LaserJet CP1515n printer, which has being asked quite a number of times, without a satisfactory solution, other than to replace the rather expensive toner cartridges, even if they are still usable for months after the page count is gone to zero. Where is the sense for the protection of our environment in that, having to replace near full cartridges??? I purchase only original and genuine HP cartridges, but I refuse to discard a near full unit, simply because the counter says so.
    Now to the issue at hand:
    Printer: HP CP1515n, model CC377A
    Firmware: date code 20080813
    Operating system Windows 7 Professional
    Printer used as a shared network printer and runs daily through the calibration routine when switched on.
    Issue present with all connected PC's, also running Windows 7.
    Problem: Currently it is impossible to print pages without a blurred edge on the right hand side of an A4 page. Alignment appears to be correct on the left hand side of the page. Was able to print Diagnostics Pages ( two), which shows a parameter settings matrix from 01 to 27 and A to X and there is also a second page with a large number of squares in colors, which also show the mis-alignment.
    As the "ToolboxFX" program, which is mentioned numerous times in the support pages, is not supported in Windows 7 anymore, the user has to make do with the web interface of the printer, which allows for a range of settings as well. I assume this web interface does not support the adjustment all settings on the printer.
    From the diagnostics page, I assume it might be possible to adjust the parameters set out in the parameters matrix, shown in the middle of the page. I would like to know, how can this be done or at least re-set, as I think these parameters show how askew the image is printing?
    I might be wrong, but I'm not convinced this mis-alignment issue is simply down to the cartridges.
    Looking forward to a reply or any suggestions.
    Thank you very much.

    Thanks for letting me know James_LAG.
    At this point it does look like a hardware issue with the printer. Please call our technical support and inquire about a replacement printer, at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Contact HP.
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Logitech Vision Pro - blurred image

    At the end of last year I posted on here trying to resolve a problem of people seeing very blurred images of me in iChat. I gave up eventually but have since contacted Logitech who suggested I try it on another machine. I tried it as an alternative to the built in iSight on my MacBook Pro and the results are a vast improvement.
    My PowerMac and Macbook Pro are both running 10.5.7 and iChat 4.0.8. The PowerMac gives dreadful images, the MacBook Pro is fine. So what does iChat on the laptop have that makes it work as expected?
    (Results at my end look fine on both machines.)

    Yep.
    You can try this on trial first
    http://www.ecamm.com/mac/powerboost/
    It may help.
    One clue might be to look at the Activity Monitor and see what the CPU usage is for iChat, iChatAgent and vcencoder (Lower case) during a Video Chat (Or Preview) and see if they seems to be large differences between the two computers
    iChat 4 "pushes" some of the video production for iChat to the Video card.
    Technically it is the Video card that prevents Backdrops on PowerMac computers but as these can be updated on Towers and some Built to Order options the Processor level is used as the controlling factor (Intels Only)
    9:56 PM Tuesday; June 30, 2009
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Maybe you are looking for