Blurred pictures

Hi,
I'm quite new to illustrator and I am trying to make a company catalogue.
On screen the pictures look ok and they are high res. When I print A3 the pictures print perfectly but when I print in an A4 booklet they are really blurrey.
Does anyone know why this is and what I can do about it?
Thanks
Karra

Hi Monica, thank you for replying to me.
The pictures are around 2MB, and 2500 x 3800 pixels.
By blurry I mean pixelated, quite badly.
The images are jpeg's
I have scaled down the images as they were larger than an A4 page, i have reduced them to about 1.5cm
When I prink on A4 it isn't scaled but on A3 it is enlarged, which is whats confusing me!
I print them on a Ricoh colour laser printer and I don't create a pdf first.
I hope that answers everything you asked!
Karra

Similar Messages

Iphone 5 camera is not working soon after I downloaded ios7. Camera is frozen and shows a blur picture.

Hi Apple,
Can you tell me if there's a reason for my camera not working on my iphone 5.
Soon after downloading ios7 , the camera's front picture has frozen and shows
blurred picture . The app itself is frozen also , can't bring up photos from photo album .
Also I reset the phone and still the camera is not working .
please advise me as what to do next .
Regards.
Reggie.

Hi Patoraffo,
I understand that you are having issues with the Camera app functioning, I found the following information that may provide a resolution:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Camera is not functioning
- If the screen shows a closed lens or black image, force quit the Camera app.
- If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tapping Settings > General > Restrictions.
- Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
- Third-party cases can interfere with the autofocus/exposure feature and the flash (iPhone 4 only); try removing the case if you have image-quality issues with photos.
- Try turning iPhone off and then back on.
- Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
- Try to remain steady while focusing:
- Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center. Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
- Video: Adjust focus before you begin recording. After recording begins, you cannot readjust focus until you stop recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll. Note: Video-recording features are not available on original iPhone or iPhone 3G.
- If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
Thanks,
Matt M.

Does adobe photoshop elements 12 fix blurred pictures

does Adobe Photoshop Elements 12 fix blurred pictures? yes or no

Unfortunately, you're in the wrong forum. This is not the Elements forum.
Here's the link to the forum you want:
https://forums.adobe.com/community/photoshop_elements/content

Blurred pictures on itouch

I've just upgraded from an 8GB to a 16GB and i thought the problem was because I was running out of space but now i have 7 GB free I thought it would be resolved but when saving a pic from safari the picture is blured as if it's not finished loading the pic??
any ideas why this is?
Sometimes the picture is displayed fine and then after a week is blurred but most of the time is blurred from first look!
all the best
MBPG

ss

Strange lines blur picture turning out weird

Hello
a while back i had this problem where pictures wher looking funny when blurred but never realy had an answer
this is what i am talking about http://imgur.com/cs7Fy7M
Now i took this with my phone because when i take a screenshot people say the picture looks fine ,
I have tried alot of things but i can't fix it
here is a picture of it as a ascreenshot http://imgur.com/5Yq7wDc
I realy want a fix for this as most of my pictures become crap when i try to make something nice in photoshop !
thx for any reply and i hope i can finally fix this
greets

Please post images directly on this Forum (with the camera icon).
In which bit depth do you work (Image > Mode > … Bits/Channel)?
Does turning off »Use Graphics Processor« in the Performance Preferences and restarting Photoshop have any bearing on the issue?

DVD burn, all blurred pictures

Hi, I have been trying to burn a project, pretty short movie only 6mins long, which was filmed in very high quality and looks great on my preview scree, but alll the dics when played back on the PC or the TV are blurred, not sharp. What is my mistake? I am using a DVD +R on PAL setting. Thanks Nadja

Hi, Colleen,
Welcome to the discussions! Sounds as if you are doing everything correctly.
You cannot always guarantee that if preview is fine the burned disk will be ok.
First, try making a disk image. Follow these directions: http://docs.info.apple.com/article.html?artnum=164927
If that looks good, then perhaps the problem is the media. What are you using?
Verbatim DVD-R is the best...many problems with others.
Try those and see if the color is better.
You also might want to look at this thread, and be sure to do anything Len Goff suggests as he is a real DVD expert: Len Goff, "G4 won't recognize DVD-R" #2, 12:53am Oct 14, 2005 CDT
Post back if this does not help.

Invisible Shield + Colour Screen- Does Anyone Have a Blurred Picture

I was looking to buy an invisible shield for my ipod video and noticed that in my local online store there was a note that said:
"due to a problem with the included screen protector blurring the the screen on colour iPod's and iPod Photo's we do not recommend purchasing the Podshield for use with any iPod's with a colour screen"
Does anyone have this problem or a way to get passed it? The Shield sounds great so I would really like to know any way I can get passed this.
Thanx
Ipod Video (30gb)

I bought an invisible shield by direct mail from the manufacturer in the USA and it arrived within 4-5 days. $25 sounds a lot for 2 bits of plastic but from what I've heard about how easy it is for Ipod to scratch up (I wouldn't know myself!), it is worth every penny. As long as you take your time to install it and follow the instructions properly, it provides superb protection and you can bearly notice it once its on. It is a FANTASTIC product and I would recommend it to anyone. In fact, it's the finish that Apple should have had on the Ipod from the start !
Video Ipod White 60gb

Blurred pictures on iPhone 4

I've cleaned the lens but my front camera is blurry. To get a great pic I now have to use the back lens. What can I do to correct?

iOS: Import personal photos and videos from iOS devices to your computer

HT201077 blurred photo stream pictures

Some of my pictures in a shared photo stream take longer to load and then they are blurred on my iphone 4s. I tried emailing one of the pictures to myself but the picture becomes a small dot. The blurred picture wont save to my camera roll either. Is there a fix? or do I just ask for the pictures to be shared again?

Do you have iPhoto on your iMac setup to automatically import Photo Stream photos into your iPhoto Library?
If you do they will be in your library where you can add them back to the Photo Stream.
OT

Blurred, fuzzy and faded picture on screen of Compac Presario CQ5000 desktop series.

Blurred, fuzzy and faded picture on screen of Compac Presario CQ5000 desktop series.
Computer has done this before when there was a power surge but fixed itself. Stuck on blurred picture now.
Problem in picture only it seems. I can see all programs are still working. How can I fix this or can it be fixed?

Cayin, welcome to the forum.
When requesting help you should always include the make/full model of the computer and/or monitor. This information is necessary for us to review the specifications of them.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Keynote 6.0 picture frames

Does anyone know where the BLURRED picture frame is in Keyote 6.0. It was a frame options prior to this update, but it isn't there now. Is this feature hidden? I was also wondering if there are more shape options than the paltry few on the toolbar (which, by the way can no longer be customized).

There is a way to fix this. Go to this thread and follow it. I am hoping Allwe will give directions:
Picture Frame for Keynote 6.5, Numbers 3.5, Pages 5.5.1

Satellite A200 external display is blurred

We have bought 5x satellite A200. After connecting it to any external display we get nothing but blurred picture.
It's impossible to work on it.
Our other notebooks P200 series work well on presented displays. We really do not know what to do with it. We tried to use Nvidia utility, WIndows utility, upgrading the drivers, switching the display via keyboard but we get the blurred picture in all cases.
We are very satisfied with A200 performance, but the external picture is unusable. Would you recommend us a solution?
Thank you!
Filippi

Hi
Could you please post exactly name of the Satellite A200.
Are these units delivered with an NVIDIA graphic card or with Intel card?
In the nVidia control panel you can change the brightness and the contrast of the display.
Im not 100% sure if you will be able to choose the external monitor but its worth a try.
Go to the control panel -> nVidia -> Display -> Adjust desktop colour settings
The new page should appear where you can adjust your colour settings.
Check if the external monitor appears and choose it. Then you could change the position of the brightness and contrast control.

[urgent] using a mask to put to pictures one other the other

Hi
I have two images: the first is the original, the second is blurred to remove the halos around the over-sharpened edges.
Having the following mask, I would like to put the two images ons over the other. The original picture should appear in the black area and the blurred picture should appear white (transparent) area. Please click on the picture, else the white areas aren't visible.
How to do this with photoshop CS4?
I tried this but I find now way to put the mask in the same layer as the second picture.. I can only add it in a third layer.
Thank you in advance for any advices.

This picture is part of a video indeed.. I would like to do the superposition for each frame of the video.. by scripting.

Ps CS6 (non CC): Field Blur: no pins

Hello
I just noticed recently that I have no pins/markers in any blur dialog (iris, field, whatever). I cannot remember whether I ever had any. I didn't use these new blur things until recently.
Comparing my GUI with a tutorial video showed me that there should be pins I can set (my mouse pointer turns into one) and adjust the amount of blur. I don't even see the first standard marker. I see nothing but a blurred picture. When I guess the position of pins I can adjust everything. So basically it works but I see no visible markers.
My system is 4 years old but I didn't have problems with it so far (been using CS6 for over a year):
CPU: AMD Phenom II X4 3,2 GHz
GPU: AMD Radeon HD 4770 - 512 MB RAM
OS: Windows 7 64bit Home Premium
Adobe Production Premium CS6
my software is always up-to-date (autoupdater active for everything)
I deactivated the GPU support, restarted photoshop but no difference.
Did anyone expierience something similar or has ever heard of it or knows a solution or can help to narrow the cause?
Regards,
Mopsi

Is "View > Show > Edit Pins" definitely enabled as below:

Zoom Blur Effect?

Does anyone have an implementation of a zoom / radial blur effect in Flex?
Or an idea to how it can be achieved by extending the Blur effect?
I'm not looking for blurring pictures in photoshop, but a live blur effect.

hi,
Its Possible with PixerBender a flash player 10 feature which is a new programming paradigm for manipulating pixels of your application on the fly.It works by taking pixels of your desired content from your application as byteArray and applies image manipulation algorithm known as kernels and give proccessed output back to your app. For more information on it visit
http://labs.adobe.com/technologies/pixelbender/
if you want to utilize prebuilt pixelbender effects visit exchange
http://www.adobe.com/cfusion/exchange/index.cfm?event=productHome&exc=26&loc=en_us

Blurred pictures

Similar Messages

Maybe you are looking for