Blurred preview image when dragging playhead in Animation Timeline

Hi,
when I move the playhead (of the Animation Timeline) by hand back and forth, the image get's blurred untill I stop dragging. This is really annoying since I need to draw and animate some small shapes in pixel perfect manner and can't see the difference between the frames because of the blurred image.
It is not blurred when I use the "Go to Next Frame" buttons in the timeline window, but this is cumbersome as I have to quickly compare frames by going back and forth.
I understand that PS probably gives me a compressed version of the images so it can actually play the animation fast, but I am talking about a hand full of frames in low resolution (1000x1000) on a Macbook Pro Retina with 16 GB RAM!
My Performance setting are all up (90% RAM allocated to PS, enough free space on my SSD Hard Drive). I also tried different settings for the History and Cache.
Can anyone help?
Thanks!
Marek

OK, I found out the reason I wasn't hearing the sound when dragging the playhead was due to the fact that in the properties for the sound I had the Sync set
to Event, but I needed to set it to Stream.  Then it works fine!

Similar Messages

  • Why can't I see a preview image when opening files in InDesign?

    I have "Always save preview images with documents" checked in File Handling, also with Save As. But I can only see the CS3 ID icon in my folders on the desktop, and when opening a file in InDesign. I'm running 10.4.11. Shouldn't I be able to see a preview image of the first page of an InDesign file?
    Thanks!

    i think those preview images means that indesign saves a lowres image of every placed image inside indd. So you can open your indd in some other computer and see all placed images even if you don´t have all the original linked hires images transferred with indd.
    If you want to see your documents first page as document icon, use Bridge to browse your files. It recognizes a content of indd files and show first page as icon. .

  • Help. The audio of my footage goes really quiet when dragged into Premiere Pro timeline

    Hi there,
    Basically, I conducted an interview and the audio sounds loud when I play it through the top left editing window on Premiere, but when I drag it into the timeline it goes quiet. I go on audio gain and it says the peak amplitude is set to -12 for example. Any explanations what is going on/how I can improve the audio?
    I tried compressing the audio, which does make it louder, but it also increases the sound of the background traffic noise and makes it sound strange.
    Please help.
    Cheers,
    Jake

    Just as an experiment add the fill left audio effect to a clip on the time line, does that make it louder?

  • PE6 & Outlook2003: Blurred embedded images when using Photo Mail function

    Images/photos embedded with PE6 Photo Mail in Outlook 2003
    emails are blurred/out of focus.
    OS: Winxp Home, RAM 3Mb, Photo Elements, Nikon D70, NEF
    files.
    This problem suddenly started.
    Any ideas how to correct it ?
    Thanks,
    J-J

    Meer10 wrote:
    > Images/photos embedded with PE6 Photo Mail in Outlook
    2003 emails are
    > blurred/out of focus.
    > OS: Winxp Home, RAM 3Mb, Photo Elements, Nikon D70, NEF
    files.
    > This problem suddenly started.
    > Any ideas how to correct it ?
    > Thanks,
    > J-J
    >
    You might want to to try the Photo Elements forum...
    Steve

  • FCP X crashes when dragging effects into the timeline

    FCP X will crash when I try to drag an effect from the effects panel into the timeline. This happens for effects, transitions, titles - the lot.
    The weird thing is, this only happens on some events, others are fine. Has anyone else experienced this and/or found a fix?
    Thanks,
    J

    Unfortunately I can't get that far in the process to be able to answer your question.
    The crash doesn't occur when I try to add a transition to a file or storyboard - it happens when I try to drag the transition outside of it's own panel.
    As you can see in the screenshot, when the file being dragged touches the red line, FCP shuts down without warning.
    Very confusing and annoying!

  • Photoshop blurs image when opening jpeg from Nikon

    Hi
    My photoshop in CS6 blurs an image when opening a Jpeg this only happens on my own devices, so for example if the photo is taken on nikon DSLR, ipad or iphone. any other image, i.e. stock and downloaded and its fine.
    I just cant figure out what the problem is, but essentially all my photos are uneditable because of the blurring. can any help?
    Many thanks

    If OpenGL drawing is disabled, then the video driver isn't too likely.  Most of the problems in drivers show up with OpenGL drawing enabled.
    But printer drivers and fonts can sometimes cause issues.
    And there's always a chance that the video driver is failing at something simple (like drawing a menu or cursor).

  • Line along "bottom" of image when using camera on iPhone 4

    Hi all
    So I have a brand new iPhone 4 and everything seems fine, except for an issue when taking pictures with the camera, which I have a sneaking suspicion is a hardware fault. I'm hoping not, but I don't hold out much hope...
    So when I take pictures, I have a line parallel with the bottom (side with the home button) of the iPhone. This appears both in the preview image when taking a shot, and on the saved image. It does not show when shooting video, but I have noticed the image is zoomed in slightly when shooting video, and the line is not in this.
    The line is approximately 1cm away from the edge of the screen. This is not a discoloration, like with the bonding agent, it looks like a line of pixels.
    I have taken a picture, but can't see how to upload it on this forum. If it'll help, I'll upload elsewhere and link it.
    Thanks in advance for any suggestions.

    And also when I completely turn my iphone off it doesn't reboot when I hold the power button in and I had to do a soft reset to make it restart but even when I did that it wouldn't reboot and about 1 hour later when I tried it again it did the screen was white with nothing on it apart from a small oval in the middle of the screen showing my lock screen and it took 4 hours for it to sort itself out and then it started flickering :( :( please someone help what can I do??!!

  • Supress image in Drag operation from af:image Drag Source

    We have a image with client Attribute that is used as AttributeDrag Source
    jsff snipped looks like this
    <af:image id="image1" ....... source= ........
    <af:clientAttribute name="SymbolId"
    value= .......
    <af:attributeDragSource attribute="SymbolId"/>
    </af:image>
    When user does a drag from this image, by default, user sees the same image being dragged
    We need to suppress the image and just show a + icon while drag is in progress.
    Any pointers ?
    Thanks,
    Jaspal

    I understand this is the default behavior.
    To clarify the Use Case, we drag from adf image into a flex region. Once drag enters flex, flex fetches a different image for the object being dragged
    User sees 2 images when drag enters flex, a ghost image coming from adf and the correct scaled down image from flex. We need to suppress the ghost image from adf
    Looking for workaround (maybe javascript) to suppress the ghost image and just show a + icon while drag is in progress

  • Preview Icons vanishing when dragged into new folder.

    When dragging an image file (with a preview icon showing the small representation of that image) is dragged from it's original folder to a new one, the preview disappears and is replaced with a generic "EPS" or "Jpeg" grey icon. Futher, if I get information about the file, the preview picture of the image also shows just a generic file type icon, even though I can see clearly the preview icon. This is so frustrating, as I must then batch process images in photoshop to have a new preview image show up.
    To make things even more annoying, the process is inconsistent. If I drag the a eps file from the original folder with the image preview into a new folder, the preview may be missing. If I drag and drag, creating multiple copies of the file in a new folder "hnuewf.eps 1, .2, .3 etc...) almost always one of these attempts will copy correctly, with the preview intact. What the heck is going on!

    Partilly solved by rebuilding permissions....

  • When previewing images by clicking on the thumbnail in an Event for example, I've been finding that many images preview in a 'zoomed in' way so only a small part of the photos is previewed in a highly magnified view.

    When previewing images by clicking on the thumbnail in an Event for example, I've been finding that many images preview in a 'zoomed in' way so only a small part of the photos is previewed in a highly magnified view.
    Initially I could find no cause. Then I tried right click - Edit and on the affected images, always get this warning:
    "Image Cannot Be Edited - This photo was previously edited with another application or with an early version of Iphoto. Duplicate this photo to edit it." and a "Duplicate To Edit" Button is displayed. 
    The external Editor defined for iPhoto is Adobe Photoshop Elements.
    Now, I reckon the MUST be others out there affected by this same apparent Preview bug, yet my searches have not revealed any answers.  Also seems impossible to find a contact number for adobe???
    Thanks

    Start '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Firefox in Safe Mode]''' {web Link} by holding down the '''<Shift ''(Mac Options)'' >''' key, and then starting Firefox. Is the problem still there?

  • Hello Apple community... I am trying to combine multiple pdf's into one, using preview, but when I drag the additional pages they show up as separate documents.

    I am trying to combine multiple pdf's into one, using preview, but when I drag the additional pages they show up as separate documents.  When I drag the doc in a line would show up in the past, and if I went above th eline all was good.  It doesn't have a line, and no matter what I try I am having no success.
    Please help!

    According to an Apple Support article, unless there are unforeseen issues
    in file ownership or permissions, the combining of .PDFs should be simple.
    •OS X: Combining PDF documents using Preview - Apple Support
    There are a few variable and similar methods, some change with version
    of OS X in use; some vintage OS X may vary a little in the process...
    A variety of similar topics appear in search results, with terms:
    " mac os x combine pdf into one " such as this page shows...
    https://www.google.com/?gws_rd=ssl#q=mac%20os%20x%20combine%20pdf%20into%20one
    If the system is older than Mavericks there may be other methods to try.
    Suggestions are among linked results in the search. I see a few fair ones.
    •Here's another that offers generally similar suggestions...*  this info looks OK, extra links, do not:
    http://osxdaily.com/2014/06/27/how-to-join-multiple-pdf-files-into-a-single-pdf- document-in-mac-os-x/
    { note: avoid clicking on links to products in * this ^ page, since they likely will not help & may be adware prone }
    If you have a problem after trying other methods, based on an OS X
    your computer is running, post back with more exact information...
    Good luck & happy computing!
    edited

  • In PSE 13, when I open a folder, jpeg files have a preview image, but PSD, DNG and CR2 files don't. Also, no thumbnail below the file list.

    Working in PSE 13, when I open a folder, jpeg files have a preview image, but psd files just have white sheet of paper as preview.  I have to open the file to be able to see it.  Also, there is no thumbnail of the file below the file list.Surely, there's a setting that needs to be changed. I did not have this problem with Elements 12. This is a real bother because I have to use Lightroom to see all the file types. It seems as if Elements is using the standard Windows file loader that can't show previews of file types it doesn't know including .PSD, DNG and CR2. Is that a bug or did I do something wrong? Thanks for any help.

    I am using Windows 7 64 bits. Working in the editor, I never use the organizer. The screen above is not the same at all that I got in Elements 12, it was completely different and showed me a thumbnail below the listing when I single clicked on one of the files. In Elements 12, I also could see  a thumbnail of all the file types, not only the jpegs. It is as if the loader is the regular Windows used anywhere, not the right one for Elements. I hope someone understands my problem.. Thanks.
    Mike

  • Why, since CS6 does DW now use ABSOLUTE image paths when dragging images into Design View from a folder in Finder?!

    While I am grateful the previous issue I had with not being able to drag files into design view at all (in CC and CC2014) was resolved.
    Guys (Adobe), seriously, if you're going to change the functioning of something that used to work just fine, at least supply a way for a user to revert to the old way... I absolutely loathe that I need a legacy version of DW to continue with my current workflow. Please put it back to the way it was, or at least allow a user to chose between the two behaviours.
    If there is a way to do this, without using the Site Manager (which still doesn't work from Finder even with relative to document selected), I would appreciate any guidance.
    As for using the Site Manager (before some smart guy suggests that I just use that) I do not wish to navigate to and create up to 20 "sites" a week and wait for DW to cache them all, when I am already in the folder with the image assets in Finder.
    Also before someone pipes up and says: "You shouldn't be diving sites in design view anyway", I don't... I develop many, many newsletters every week and the folder structure is such that navigation to the actual image folder using the Site Manager would be painful at best.
    I don't really like having to and replace all instances of "file:///Users/me/Work/company/Mailers/Year/wk14/mailer/dev/img/prod5.jpg". It is horrendously wasteful, time-wise.
    Thanks in advance for any helpful replies

    Sorry Murray, DW used to have an idea, my point is that since CS6 its developed a case of Amnesia.
    The "elements" are in the "root" folder as follows:
    newslettername.htm
    img
         imagename.jpg
    So the relative path would be <img src"img/imagename.jpg" />
    However since the change: <img src"file:///Users/me/work/Company/year/week/campaign/img/imagename.jpg" />
    Which is completely useless and needs to be corrected before I upload the html anywhere.
    As for using the site directory, I did answer that in my initial post. I use a laptop, I really don't want a site manager taking half my screen just so I can see the folder structure and navigate with that, especially since I am already at the files I need in Finder.
    Again, this is something that used to work just fine in previous iterations of DW, so I don't believe Adobe is incapable of fixing it nor am I being unreasonable asking for a choice for those that may find the local absolute paths useful in some way. All I want is to be able to chose not to use absolute paths when dragging from Finder.

  • In iphoto, when I click on Print, the preview image it shows me is an enlarged section of my photo. I cropped the photo and checked with no restraints. Once the photo goes to Print, I can't fix it back to the way it is in iphoto.

    In iphoto, when I click on Print, the preview image it shows me is an enlarged section of my photo. (In iphoto I hadI cropped the photo and checked "with no restraints." )
    Once the photo goes to Print, I can't fix it back to the way it is in iphoto.

    It is working now. I no longer get the message about the item not being available in the US and I can access the store.

  • How to preserve size when dragging image into another image?

    When dragging a 5x4in photo into a blank 11x8.5in image, the 5x4 is shrunk more than 50 percent.  Any fix for this?

    In a message dated 9/9/2014 12:28:44 AM Pacific Daylight Time,
    [email protected] writes:
    What are the involved images’ resolutions?
       293.63 pixels/cm into 823.193 pixels/cm
    Have you tried placing the image as a Smart Object?
    No, but just treid with same shrinking.
    Larry in Berkeley, California
    >

Maybe you are looking for