Blurry images in chrome

I've set simple animation where image changes size from small to large.
Image is clipped in a div.
Image looks VERY blurry and pixelated in chrome (IE and Firefox are OK).
Why is this happening?

i there,
I would like to clarify some things.
1- when using attr you need to target an img tag and not a div. So basically you load your 'seed' image on the stage and change from div to img.
Note: when using img instead of div, you are limited somewhat because you will need to have all your images to the be exact same size otherwise your will have distortions. An advantage is that you could have the seed image loaded on the stage and change it's size. For example your original image is 100 x 100. You put it on the stage and change the size to 50 x50. Even though your images in the folder are 100 x100, they will automatically fix the seed image. This can be good because images can look better when the original is larger and scales down to smaller when added in the seed image. This is why I suggested attr so you could load a larger image in the seed image and get a better rendering.
2- When using css background - you need to have div and not img. The images can be different sizes but they will load at (0,0) in their original size in the container and you need to use background-repeat, no-repeat so that you have only one image show.
Hope this make sense.
So I am not sure whether this will help with your problem.

Similar Messages

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

at the end, you say "import preferences", which program are you describing?
So im safer using footage that is remotely being pulled from iphoto...
vs
using footage that is imported into FCP from imovie?
Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

Fix blurry images downloaded from Safari (The semi-easy way)

Hi, I've noticed a couple of people around here have had problems with image quality (blurry images) whenever an image was saved to the camera roll from Safari.
Turns out, there is a simple fix for this!
This fix requires a drawing app such as Brushes (Or any drawing app where you can take an image from your camera roll, and save to your camera roll).
Now, just open the image that is blurry in the selected drawing app.
Notice anything? The image is no longer blurry! Woo!
Now just save the image back to your camera roll, and delete the old blurry image. You won't be needing it anymore.
Problem solved.
(I think opening the picture in the drawing app reduces the size of said picture, making it less blurry. I'll try this the next time I find a blurry image to see the changes in quality. I'll also include a picture guide for those that don't understand how to do this (But would you really need it :P))
Hope this helps all that have this problem!

Like I said, I noticed a lot of people having this problem, so I decided to post this to hold everyone over until the problem is fixed. Maybe this problem will secretly be fixed in the 3.0 update? It certainly is easier and quicker than uploading the blurry photo itself into a program such as Photoshop and editing the dimensions there.

Blurry Images

Hello, I am using Fireworks 8. When I create a nav bar or
other image, I have an issue with the image being blurry when I
import into Dreamweaver. I have image resolution set to 500 pixels
per inch which seems good enough to me and I am not stretching or
otherwise skewing the image in the table cell I am inserting it
into. I should say that I am new to Fireworks and also that the
images look fine in Fireworks. Thanks in advance.

deanmixon wrote:
> I discovered something else. Forget Dreamweaver, when I
preview straight from
> Fireworks in am IE browser window, I get the same blurry
images, the look as if
> the have been zoomed in on. I realize I am probably
making a rookie mistake
> somwhere, please help.
The problem might be the export settings.
Open the Optimize panel, and then click on the Preview button
at the top
of the document window. Test the image with the various
export settings.
GIF for vector images and text with no gradients. JPEG for
photo images
and gradients. When you like the way the image looks, test in
your
browser again.
Linda Rathgeber [PVII] *Adobe Community Expert-Fireworks*
http://www.projectseven.com
Fireworks Newsgroup:
news://forums.projectseven.com/fireworks/
CSS Newsgroup: news://forums.projectseven.com/css/
http://www.adobe.com/communities/experts/

Blurry images question

OK, I have run into a problem troed to solve now I have to ask the ID gods. I have a project that I did which was to edit some text and change some links in an .indd file.
I was sent a pdf to look at first along with t a list of instructions. The pdf looked fine all images nice and crisp, then I was sent the .indd master file for that pdf.
When opened the master .indd file I noticed that there are a few images which are blurry. But looking at the pdf that came from this .indd the pics are fine.
I need to get to the bottom of this as there is no need to re export and save as a new pdf as I see the blurred pics are in the .indd.
Any help here?
R

OK here is a fact, when I do a project I usually get the pacakage folder with all links but this indd did not have a linked image file I just got the ind itself, yet when I opened it I got the missing links message but the images were viewable inside the .indd file the complaint was after I did the edots and resaved that is when the blurry images were noticed But these were in the indd before, so moving on.
I now have got the images in another separate file but the images are not linked. I would think now to have the folder with tall the images in the same foldewr aas the .indd and link ALL images to see it I still see those few that are blurry. I do see that the image it self outside of the indd is NOT blurry. Which leads me to believe whoever imported this image into the indd originally did not optimize correctly.
Am I on the right track?
R

Blurry images in LR 5.3 Slideshow

I am having a problem with LR 5.3 creating very, very blurry images in a slideshow exported to a 720p mp4. Not all will be blurry, just random. And they are very blurry. Like it did not render the preview. Never had this problem before updating to 5.3.
Here is a screen shot of a blurred one.
And the next image in the slideshow, wich is just fine.
Any ideas?

Bob Somrak, I forgot to turn off the Export Negatives check box.
So I did the Export as Catalog and it came up with 3992 in All Photographs and 3991 in the file totals. So it got rid of the 10 extra pictures. I then had it syncronize the top level folder and it found and imported 10 photos. So I now have 4002 pictures and it is displaying 4002 pictures. 4002 is the total LR said I was supposed to have in the old catalog before I did the export, but it would only display 3992. Unfortunatly, I still have the problem that it thinks the sidecar files are missing. It does not seem to make any difference to anything, so maybe I should just not worry about that.
Thank you very much for your help!
I have two calalogs with family photos in them, I will now see if it will let me merge them.

Compressor creates pulsing blurry images on some clips!!

Rendering from ProRes HD to DVD m2v compressor creates pulsing blurry images on some clips every 15 frames! i had had this happen twice on 2 different clip since the last update to 6.0.3 most of the movie is fine but when I get to a certain clip in the movie every 15 frames it becomes very blocky!
Anyone have this issue?
Thanks, mark

I also have the same pulsating pixelation/blur problem. It used to happen occaisionally in the passed, but recently it's been happening a lot. I used to be able to eliminate the problem by (reluctantly) doing a 1-pass, but even that doesn't work anymore. The same pulsating result seems to be there whatever m2v output settings I set. My company has wasted days trying to sort this out.
I never was 100% happy with Compressor - now it's right in the heap for me. I wouldn't recommend it.
Help Apple!

When I burn a 1.3 GB movie on DVD on the highest quality setting, the result is a blurry image. How can I fix that?

Why did I get a poor quality DVD result when the quality is good when I view it on Premiere Elements?

piboss314
What version of Premiere Elements are you using and on what computer operating system is it running?
What is the project preset for the project and what are the properties of the source media for the project.?
What is the screen size of the TV being used for viewing of the DVD-VIDEO on DVD disc? Do you have the
same problem if you view the DVD-VIDEO on DVD using a computer player?
We need to explore if this is a problem of expectation or something else.
a. If you take your Timeline content to AVCHD format on a DVD disc, what is the quality of that end product?
Just in case note, DVD-VIDEO standard 4:3 and widescreen 16:9 have the same frame size, 720 x 480 (NTSC) and 720 x 576 (PAL).
The widescreen has a 16:9 flag that stretches the video for display after encoding....in the case of NTSC to about 856 x 480. So, if you
have a high resolution Timeline content, what you are seeing in the end product DVD-VIDEO may not be faring well in the comparison.
b. Please define "poor" quality - not clear, blurry, images smudged looking, something else.
If you are starting with interlaced video with field order = Upper Field First, you may be running into a problem with the field order
that is part of DVD-VIDEO, that is, Lower Field First. We can correct that in 2 ways.
Please review the above. Your reply with details will direct us in customizing an appropriate troubleshooting plan.
Thank you.
ATR

T410 camera blurry image

Hi!
I am running a T410 with Linux. The camera is detected but the image is out of focus. I thought it may be a Linux driver problem, so I installed Windows 7 in VirtualBox, using USB-pass-through to use the Windows driver for the camera. I was surprised that the image was exactly the same: out of focus.
Note: I have tried various light conditions, distances, etc. The images below are a comparison at the same distance/light of the internal camera, with an external one:
Image with internal camera:
Link to picture
Using an external USB camera:
Link to picture
Anyone has seen this problem?
I know there is an utility called ThinkVantage Communication Utility. Which I can't run on Linux or virtualized. However, as far as I know it has basic image controls (which also work on Linux), but nothing related to focus (and the focus is also afaik fixed).
I am thinking this is faulty hardware. I am trying to avoid wiping my system just to restore the factory image just to watch the same blurry image, specially after the hundred of issues I have found with the camera on the web.
Duncan
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules
Solved!
Go to Solution.

Man, you made me almost scratch the case with a knife looking for a plastic strip. There is none. :-)
Accidentally, while trying to move the "strip" I could not see, I noticed the image quality got fixed (on Linux), but it lasted only while I had my fingers there. Gotcha. If I press the area near the lens against the screen, it gets fixed.
Without pressing image
Pressing the plastic image
So the problem is hardware. Shame on Lenovo, I was expecting a more robust construction. At least I don't see how this could have hapenned on my old T20's. Now looking in detail, loos like the screen frame is not well attached to the rest.
I will contact a service provider :-(

Firefox shows blurry images (and none of the best-known solutions work)

No matter
* if I run Firefox under safe mode (plugins disabled),
* if I update my graphics drivers,
* or if I disable Harware Rendering under Advanced Options,
Firefox keeps showing blurry images.
Here is a comparison screenshot between Firefox (left) and Opera (right) rendering the same image:
http://imgur.com/7GksG7Z
This has been happening for a long time, even through several Firefox updates. None of the solutions I've found on the web (listed above) will fix this problem.
The image blur is tiring on the eyes, not being able to see images correctly is so annoying, and I hope someone can help me fix this issue.

Changing Firefox's zoom behavior so you can enlarge just the text but not the images can lead to site layouts breaking. If you want to take a look:
View menu > Zoom > ''check'' Zoom Text Only
(If you do not normally display the classic menu bar, tap the Alt key to display it temporarily.)
Firefox 22 was the first to tie your Firefox content zoom level to your Windows DPI setting. You can break the connection and set Firefox to use 100% resolution (the classic 96dpi resolution) if you like. Here's how:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''pix''' and pause while the list is filtered
(3) Double-click '''layout.css.devPixelsPerPx''' and change its value to '''1.0''' for Firefox 21-sized fonts.
This will return the content to normal, but the toolbars may appear a bit smaller than your Windows standard for UI (100%/105%). There is an extension to enlarge fonts in that area: [https://addons.mozilla.org/en-us/firefox/addon/theme-font-size-changer/ Theme Font & Size Changer].
Can you get it to work the way you want?

Blurry images on retina display

Hi,
I have just purchased a macbook pro retina, and when I browse the web, most of the images appear blurry. I understand that the images are supposed to be less crisp than the rest of the content (like fonts) because of lower DPI resolusion of the image.
However, it appears that OS X scales the images for some reason before displaying them which makes them even more blurry. I have the same website opened at my old macbook pro, and new retina macbook pro, and the logo image looks much crisper on the old MBP.
Apple says that MBP Retina has 4x more pixels than the old MBP. If that is true, the old one pixel should be displayed by 4 new pixels and there should be no scaling / antialiasing involved.
Is there a way to fix this?
thanks
Karolis

By reading some other forums, I found that the issue is related to Safari smoothing images, and not the operating system itself. I have tried the same test with Google Chrome and the images look OK on Chrome.
So the question... is there a way to tell safari not to do image smoothing when scaling from 72 dpi to 144 dpi?

External monitor blurry image rMBP 2012

Hey guys!
I have 2012 rMPB which works perfectly and i am connecting it to my 22" Benq monitor via MiniDisplayPort to VGA connector (monitor only has VGA).
Image on the external monitor is really bad, it looks blurry, not sharp enough and brightness is very low.I tried calibrating it, no luck
Monitor is working properly (tested on Win laptop) and resolution is set to native FullHD so i dont know what could be the problem...
Any suggestions?

Hi,
I'm facing the same problem. The fonts on an external monitor are very blurry. Graphics and icons are displayed crystal sharp. I can rule out any issue with the monitor or cable (mini DisplayPort to DVI) whatsoever, because if I run Ubuntu in VirtualBox, then within the VM the fonts are displayed sharp. Also no font issues on the notebook display itself.
So it all comes down to a font issue on external displays, as can be read in several forums. The font smoothing tweaks didn't show an effect.
Macbook Air 13" mid-2012
OS X 10.8.2 Mountain Lion (10.8 pre-installed)
External Display: Benq G2222HDL connected via miniDisplayPort to DVI Adapter on the Thunderbolt connection
Can anyone reproduce the correct font display in a virtual machine?
Thanks,
sal_manilla

How do I fix my blurry image in my Dreamweaver Document

I have made up a HTML document in Dreamweaver. It is going to be an email template for work. I have inserted several other images into this document and they look perfect. I have one image on the other hand that is blurry. I am not sure how to fix this problem. I have tried saving it for web out of Photoshop .jpeg and .png and nothing changes. I am starting to think that it is in my html. The image is larger then the space I am tying to place into in Dreamweaver. I have also tried making it the same size as the space and it is still blurry.
Please Help.
Thanks!

Moved to the main Dreamweaver Support Forum.
Without seeing your page or image, it's impossible for anyone to say. Please upload your file to a website, and post the URL here so that people can have a look.
At a guess, though, the picture looks blurred because it is blurred, possibly because you have saved it in the wrong format or at the wrong size.

Blurry images when I combine files into a PDF with Acrobat

I have created 4 files in Photoshop with a combination of graphics and text. I am trying to make a PDF that can be emailed, so it only has to look good onscreen. I have saved each file in numorous ways (jpg, tiff, pdf, bmp etc...) I have eliminated any compression. When I pull the files up individually they look great, but when I try and combine them in a PDF the images get blurry. I have selected the largest file size, change compression for jpg (and the others) in acrobat. I can't figure out what I am missing. Why do the files look good until I combine them?

A little confusing. How to eliminate compression when using JPG or PDF?
If you export the images from Photoshop to PDF, will they look good on screen? If so, and you import and combine in Acrobat, they should not be changed, unless you select "Save as optimised PDF", because then optimisation settings could re-encode the images to lower resolution.

Blurry Images in new Photos App

I have noticed a problem with the new Photos app and I am uncertain whether it is unique to my system (iMac 2013 21inch). Photos taken in a portrait orientation do not display sharp on the screen. They look a little blurry as if the software hasn't properly rendered the image for preview. If you zoom in to part of the photo and then zoom out again the issue corrects itself and the image is displayed sharp.
Has anyone else had this problem and have they fixed it?

Hi, i'm struggling to find a way of merging albums in the new photos app does anyone know how to do this?
Make the sidebar visible. View > Show Sidebar ⌥⌘S
Select one of the albums and all photos in it.
Drag the selected photos to the other album in the sidebar to merge the photos into it. Then delete the now empty original album.You can delete an album by selecting it in the Sidebar, ctrl-clicking it, then use "Delete album" from the contextual menu.

Blurry images in chrome

Similar Messages

Maybe you are looking for