Blurry Monitor Help?

My monitor goes blurry when I open the lid. It happens on ocassion and adjusts as I move my screen up and down. My lid also seem loose, could that be it? Any help?

I also experience a problem with the VX2433WM. When I attach it to my MBP via HDMI (of course via a mini-dsiplay-port-to-HDMI adapter) it does recognize the screen, but for every resolution I select the picture is cute at the edges.
Since the screen is Full HD capable (1080 p 1920x1080) there should not be an issue at alle with any resolution.
any ideas why this could be?

Similar Messages

I recently had a kernel panic in which I think my hard drive only had so much space left after I ran a bunch of drivers I thought I needed. I uninstalled all and moved files. For some odd reason I'm not getting sound of of my hdtv/monitor.HELP?

I recently had a kernel panic in which I think my hard drive only had so much space left after I ran a bunch of drivers I thought I needed. I uninstalled all and moved files. For some odd reason I'm not getting sound of of my hdtv/monitor.HELP? I uninstalled all the drives and apps I download. I moived files either to trash if not needed, and others to other external drives. I went into disk utility and did a repair disk permission and verify disk. Clean out junk files. Now my hdtv/monitor does not give me any sound, nor does my mac mini. Can someone please tell me what to do?

What drivers?

Scanned magazine article to PDF. No matter what I try, text is blurry. Help!

Scanned magazine to PDF, no matter what I try, text is blurry. Help!

What do you try? Please be specific, include details of the products AND VERSION used, and the options used at each stage. If you're scanning to JPEG, don't.

G5 blurry monitor

I"m running a new G5 imac 20". Just started today getting a problem where the pixels on my monitor get blurred for a quick second. Then everything goes back to normal. Also as I'm typing here, some of the text gets blurry for a sec. Haven't moved or bumped my machine, so it shouldn't be that. Any ideas?

Purchased my iMac G5 iSight model 3 days ago. Experiencing weird static/glitching/video artifacts on the screen when waking up after sleep. I have triple and sometimes quadruple finder menus and docks fuzzed out on the screen.
After 30 seconds or so monitor resolution snaps into place. It doesn't freak out every time it wakes, but, it does occur often--70% of the time.
Very worrisome and annoying.
The local Mac Store (Eugene, Oregon) were not helpful. They condescended and made me feel like it was my fault--they insist there is nothing wrong with the hardware or software. I even filmed a Quicktime of the screen going haywire and they said they didn't want to watch it--basically left it at "if Apple declares it a known issue we'll acknowledge it, and figure out a way to fix it."

Blurry graphics HELP!!

I am trying to lay a graphic over some video on my timeline. When i first put it in my timeline, it looks normal. After i render, it gets all blurry??? I searched the posts on here and tried some suggestions like putting it into an uncompressed 8 bit timeline. I still get the same thing??? I even tried turning to mpeg in compressor without rendering, but i get the same thing in the final dvd. a blurry image?? The final project will be on DVD. Please help!!! Thank you.

thanks guys for your quick responses. i can't afford a true NTSC monitor so i rely on my tv. at the time of my first post, my setup wasnt fully hooked up, but i just got it onto my tv and it is not as blurry as it is on my monitor, but can definitely be sharper! To Steve the original graphic was emailed to me as a pdf at 72 dpi. it may seem that since it is a compressed format that that could be my problem but the graphic looks sharp in photoshop and in FCP when it is not rendered or playing. I took the pdf and saved it as a psd in photoshop to import into FCP. is their somethin i could do better?? D Gilmore what should i export it out of as a lossless QT + alpha?? photoshop, FCP or QT itself. thanks again!!

Mac Pro 3.1 (early 2008) lags since I connected a 2nd monitor - HELP!!

Hey guys,
I just bought a 2nd monitor and i have lags every 5 seconds which
last about half a second (feels like 10 or less fps during the lag).
It happens with all kinds of applications. It gets worse with multiple
applications openend at a time. The crazy thing is that it only occurs
when i start to use both monitors at the same time. When i e.g. use
Logic 9.1 and use one monitor everything runs nice and smoothely
but as soon as i move the window slowly to the 2nd monitor i can
see the window lagging while I'm moving it. This is really annoying
because it seems not every input from the mouse/keyboard gets
into the system and its not a smooth workflow at all.
I switched the monitors connections but it didn't help.
Mac Pro (Early 2008) 2.8Ghz 8-core
Snow Leopoard ( 10.6.2 )
6GB RAM (2x2gb kingston, and the usual 2x1gb)
ATI 2600XT and 3 HDD.
1 Monitor 24" LG W2452T running at 1920 x 1200
1 Monitor 22" Samsung Syncmaster 2243BW running at 1680 x 1050
I really hope that you guys can help me out with this one.
What could be the problem? The ATI 2600XT should definately
be able to handle two screens at once with such little graphics
in logic 9 ?!
I want to run Logic 9 and an analyzer software (Spectre from AudiofileEngineering)
at the same time but its not possible with the LAG.
The problem/lags also occur when i sync the monitors.
Would a 2nd graphics card be a solution? But as I said
before its not a graphics demanding application.
Is it a hardware or software problem?
Summary:
- The whole System lags (not just one monitor) when
I start to use both monitors (having application windows on both).
I've got minor lags when using only one display and leave the
2nd one with the desktop wallpaper clean.
I tried:
-using only the 2x1 GB RAM which came with the mac pro
-using only the 2x2 GB Kingston RAM
Thank you in advance for your help guys!
Rick

Hey all,
I wasn't able to fix this yet.
I did everything I can think of. I even tried to wire
one monitor with a VGA cable but it didn't help.
I even have small lags when I am moving the Safari window
between the 2 monitors. Really little lags then but they
definitely are noticeable. I can make a video of that
if that would help someone understanding.
Hope there is someone out there who can help me with this.
Thanks already for any advice!
Cheers,
Rick
Edit: Do you think a new graphics card like the ATI 4870 would
help it? But I really don't want to spend more money just to
have 2 monitors while i have already 2 dvi connections on the
ati 2600XT.
Message was edited by: RickUnique

Mac noob needs monitor help! how do I...

I was given a 2003 imac as a gift. I've always had PCs but was thrilled to have my first mac to play around with. The bad news is that about half the time the monitor doesn't work!!! I turn the computer on and the screen comes on for a split second and then just turns black. The computer is working just fine, in fact if I hold a bright light up to the monitor at just the right angle I can see the screen and see that everything is working...except the monitor. If I put the computer on sleep mode and then touch the keyboard of move the mouse the monitor will work again, but just for one second before going black. The other half of the time the computer works just fine.
SO....seeing as how I am not a rich man I was hoping that there was a way to use my TV as a monitor. I know how to do it was my PC but I am totally clueless with macs. Can it be done? What kind of cable would I have to buy?
Any and all help is appreciated.

A 2003 iMac would be the type that has the display on a chrome-plated arm that swivels and moves up and down, like this one?
http://www.everymac.com/systems/apple/imac/stats/imac700fp.html
If so, you should try this procedure to reset the PMU (power management).
http://support.apple.com/kb/HT1712
See if that makes the video issue, which sounds like a back-light problem, go away.
It has a mini-VGA port for video output. It mirror the built in display at up to 1024x768.
You need an adapter like this
[Apple Mini-VGA to TV Analog Output|http://cgi.ebay.com/Apple-Mini-VGA-to-TV-Analog-Output-Cable-Mac-AdapterW0QQitemZ310140585854QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item4835d1c77e&_ trksid=p3286.c0.m14&trkparms=72%3A1205%7C66%3A2%7C65%3A12%7C39%3A1%7C240%3A1318%7C301%3A1%7C293%3A1% 7C294%3A50]
to connect it to a TV. If you have an old VGA CRT display, it would produce better results for use as a computer. Then you need a mini-VGA adapter that goes to VGA, which I believe is this one
[Apple mini-VGA to VGA adapter|http://cgi.ebay.com/Apple-Mac-Powerbook-mini-VGA-to-VGA-converter-adapt orW0QQitemZ120427739120QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item1c0a0d77f0&_ trksid=p3286.c0.m14&trkparms=72%3A1205%7C66%3A2%7C65%3A12%7C39%3A1%7C240%3A1318%7C301%3A1%7C293%3A1% 7C294%3A50]
(I don't know anything about these eBay sellers.)

Connecting Playstation 3 to LCD Monitor HELP!!

hey guys im new at this and i need some help please
i have a ASUS 23inch Widescreen LCS monitor and supports HDMI and HDCP.
i have done some research on how to set this up. people told me i jus need a HDMI cable in which i already purchased. is there anything else i do?
for sound i would like to connect a speaker system in which im still researching for a decent one. any suggestions? anything under 100 dollars is at best for me
also what cables or adapters would i need to have in order to connect the speaker system?

starhelper2587 wrote:
You're trying to use a PS3 with a PC monitor? I thought that couldn't be done, but I'm not sure.
Why wouldn't it?
PC monitors and LCD HDTVs are nearly indistinguishable from each other now, at least when connecting via HDMI.
It should simply be a case of:
HDMI from PS3 to PC monitor
Audio output (depends on your audio system) from PS3 to audio system. (Actually, this is one of the few differences between PC monitors and TVs with HDMI connectivity - most PC monitors don't have speakers, TVs do and support HDMI audio.)
In my case, I have HDMI to my 46" TV and optical audio to a Yamaha receiver, but could easily move the PS3 to my "office" and connect to my 24" Gateway monitor and my other Yamaha receiver. (Yes, I have TWO Yamaha HTIB systems, one in the living room and one in the "office".)
*disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

Frozen when view on external video monitor HELP

Hi everyone, I have just finished my biggest project in 3 months. Thankx for all your helps & I love the MULTICAM feature very much.
Now i'm on the second project. This project was shot on DigiBeta PAL.
To make it short: does anyone has a frozen picture as they play it out to the external video monitor for the uncompress 10bit file?
3months ago when I digitized in as uncompress 10bit , fcp play out to external monitor FINE, including the multicam feature.
However, since I need to work with 10cam at the same time, I have to capture in as DV (my source was DVCAM) so fcp can play all 10cam in multiclip mode. everything went perfect.
TOday, I capture my sources both NTSC & PAL, they can only play in the mac monitor but not the external video monitor. feeding out to external monitor make the clips freeze. the picture is frozen but the audio still playing.
My drives are fast enough since we had been working with these MEDEA drives for years.
thank you so much.

thankx for all your helps but I had tried all those before I post the question. I'm no newbie. It must be FCP's bug. I trashed the pref & select 8bit instead of 10bit for viewing, & it play ok for single clip. On multiclip, it shutter alittle bit. Maybe I need to reinstall fcp. Don't know yet.
thankx
JP

Hardware and Monitor help please

I'm new to setting up equipment and all that kind of stuff!!!
I just purchased a JVC monitor and was going to use composite video wires through my camera to hook it up but now that it has arrived at my house, I see it only has composite BNC connectors and not RCA connectors.
Are there any cable options so I can still using my camera as a deck? The camera has one A/V jack and the Monitor has the BNC composite and S-Video, plus composite RCA for audio.
Or I'm guessing I may need to buy a converter and I've heard good things about the Canopus ADVC-110.
My questions if I need to buy the Canopus:
Do I need to use the optional power supply or will the firewire be enough.
How do I get the audio to the monitor? Can run two different wires out of the Canopus, the s-video for video and composite RCA for the audio?
Thanks

Hi
All you need is a BNC to RCA cable, something like [this one|http://www.svideo.com/rcabnc1.html].
Hope that helps !
Alberto

Business Process Monitoring - Application Monitoring help.

Hi all,
Through Business Process Monitoring, I am trying to configure monitoring on table NAST, so that an alert will be generated for Billing documents print outputs (application=V3, transm. medium=1) on specific message types, if the processing status is equal to either 0 (not processed) or 2 (incorrectly processed).
I have configured this through application monitoring, using the 'Messages (Output Determination)' monitoring object. Under this, was able to configure the 2 key figures of "unprocessed messages" and "incorrectly processed messages" with the parameters mentioned above (application and message type).
I set the yellow alert threshold to 1, and the red alert threshold to 2, as I want to be notified each time a print output goes into status 0 or 2, and that a red alert be generated in the case where 2 or more print outputs are not successful.
However, upon activation of this monitoring, I came across the following issue: The table NAST already has over 40 historic entries of unprocessed and incorrectly processed messages for these message types. The monitoring is picking up all these entries right away, and therefore a red alert is being generated.
There does not appear to be a way to configure the monitoring to only look for new entries in the table matching the criteria, e.g. look for billing docs with status = incorrectly processed during the last 24 hours. It seems that unless the existing entries in the table NAST are either deleted or have their status changed to "processed", the monitoring will always pick up these entries and report a red alert, even if no new entries are discovered.
Does anyone know how a way of configuring a date range with this type of monitoring, or do I have to modify the existing entries in the table (either delete them, change their status or set the "disregard" indicator on the messages in the table) before this monitoring will work as I hoped it would?
Secondly - a more general point - although there are lots of good documents on configuring Business Process Monitoring, I have not yet found one which gives full details on all the different types of application monitoring available, and how each of them can be configured. I know that within Application Monitoring, when you choose a monitoring type, the grey box at the top half of the screen gives some good information on what the monitoring does and how to configure it, but a document which captures all these monitoring types in one place would be very useful - if anyone could point me in the right direction I'd appreciate it!
Thanks in advance for any help with the first issue above,
Regards,
John

Hi John,
you get an overview about all available key figures in the PPT "Business Process & Interface Monitoring - Part 2" under https://service.sap.com/bpm --> Media Library --> Customer Information. It lists all Monitoring Object and Key Figures with Select-Options. There is no document that describes the setup of every key figure as the setup is too similar for most objects. Therefore the grey text boxes within the tool.
The NAST collector will always pick-up everything older than x days. So you would have to process or delete the olde entries. But it is a good advise that for this rather technical key figure we should think about a delta mechanism like with our IDOC or ABAP dump monitor.
Best Regards
Volker

DUAL MONITOR HELP!!!

System Information:
HP P6210Y
Win 7
NVIDIA GeForce 9100
Above is my system information. I'm running an HP P6210Y with a GeForce 9100 graphics card. I have two [2] Dell IN2030M monitors. I purchased a VGA Splitter and that worked, but now how I wanted it to work. I then bought a DVI-D to VGA adapter and the DVI plug doesn't seem to work. VGA monitor works. DVI doesn't. It's just a black screen I get. Both monitors work perfectly. Any idea what I can do to get dual monitors going? I'm new to this and I find myself wasting more money trying things my way. Any/All assistance would be greatly appreciated.
This question was solved.
View Solution.

Here are the specs for your HP Pavilion p6210y Desktop Computer. According to the specs, this model has integrated nVidia GeForce 9100 chipset graphics that support one VGA (analog) output and one DVI-D (digital only) output. There is no way to make a passive DVI-to-VGA adapter work. These adapters only work with DVI-A and DVI-I outputs. It would require an active DVI-D to VGA converter to change the digital signal into an analog one.
The technical specs for your Dell IN2030M 20-inch Flat Panel Monitors indicate that they support both DVI-D and VGA inputs. To resolve your issue, you will need to purchase one DVI-D cable and connect as follows;
Computer > DVI-D cable > Monitor #1
Computer > VGA cable > Monitor #2
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Playstation 2 to Widescreen LCD Monitor-- Help

I recently purchased a 23" Acer widescreen 1080P monitor at a Black Friday sale, and I love this new monitor. It's twice as big as my old one and it is really nice. Anyway, I've heard stories of people hooking up video game systems (in my case a Playstation 2 would be what I would like to hook up) to their monitors. My neighbor a few houses down has his 360 hooked up to his aging CRT type monitor. I don't know the exact details but i've looked up a lot of information on how to do so, and it's all very confusing. First, i'd like to point out that that in addition to the standard VGA cable to plug into my desktop tower, it also features a DVI-D jack. As I mentioned above I would like to start hooking up my Playstation 2 to my monitor and playing on the widescreen. I know it can be done and it has been done, I just would like to know a simple way to start doing it, and if possible, items I could purchase at my local Best Buy so that I could play my Playstation on my monitor again. Any and all opinions/tips to accomplish this are welcomed. I am 17 years old and I have about 50 games for my Playstation 2, most of which I have owned since my childhood. I would like to fully enjoy these games more often, so please help!
-Pete

Roxio Game Capture for Xbox 360 and PlayStation 3
Model: 8079143 | SKU: 2460153
You came, saw and conquered in battle after bloody battle. You mastered every combat combination to skillfully outmaneuver, outstrategize and outsmart your enemies. You took on the most ferocious boss at the end of the game, the one none of your friends could beat, and eventually, agonizingly, fought your way to total victory. And now here you are, standing over the defeated body of your bitterest rival, trying to savor the moment before it disappears forever. Don't let your greatest gaming victories go unappreciated and don't forget a single glorious moment. Capture your most prized accomplishments on the battlefield and share them with the world with Game Capture. This portable, lightweight system combines cutting-edge NVIDIA® CUDA, ATI Stream™ and Intel® Enhanced for Core™ technologies, advanced software and easy-to-use hardware to let you easily save your Xbox 360 and PlayStation 3 gameplay to your PC, where you can relive it over and over again. Simply connect Game Capture to your TV through the included cables to enable real-time capture, all while still enjoying your crystal-clear HD picture. When victory is yours, a swift transfer to your PC via the USB cable lets you save your video and upload it to the Web to claim your bragging rights over all of your friends on sites like YouTube and WeGame. Feeling creative? Take your footage to the next level by adding your own voice-over or webcam commentary, or create your very own game review to share with the world.
2.3 Read reviews (3)
Sale: $99.99
*******DISCLAIMER********
I am not an employee of BBY in any shape or form. All information presented in my replies or postings is my own opinion. It is up to you , the end user to determine the ultimate validity of any information presented on these forums.

Monochrome monitor, Help PLZ

I have a mac mini and about a week ago my monitor went monochrome (where it looks like the negative of a picture) How do I fix this? I went and bought a new monitor and that didn't help anything and I've tried doing the command,option,p,r at startup and still nothing. Anyone think it could be anything other than my video card just snuffed itself out? Because it has color during the start up process and for about the first 3 seconds then it flops back to monochrome and stays that way.
THX in advance

Go into System Preferences and look for Universal Access and click on it. Under the "Seeing" tab, find the option for "Black on White" and make sure it is selected.

Blurry Monitor

A user at my office had to replace his monitor. The text on screen appears fuzzy now. I've tried upping the level of font smoothing, and it hasn't seemed to help. Is this something that is affected by the computer? or is it the Monitor alone?

It could be a couple of things depending on is this on a Mac, which one?
If so there is a setting in System Preferences Displays, there are 2 different settings there you can set. If the display monitor he or she has is not a widescreen be sure that the stetched is not in use in the Display Resolutions.
In the Color selection you may have to Do a Calibration, Just click and follow th steps.
Also make sure you go to the upper left of the affected computer and check Software Update making sure that you have all the latest Firmware and Security Updates. All can affect the performance.
Cheers Don

Blurry Monitor Help?

Similar Messages

Maybe you are looking for