Blurry text when centering textfield in datagrid

Gidday
I'm have a TextFormatAlign.CENTER alignment on the textfields in my datagrid column headers.
The text sometimes gets blurry, depending on how the window is resized.
I normally use Math.round() when positioning text fields, and I'm applying the same technique in the resize function for the header fields. The textfields themselves are rounding to the nearest x pos, but I'm guessing it's still blurry sometimes because the centered text could be 1/2 a pixel out?
Is there a way to kill the blurriness?
Cheers guys

It's a custom coded datagrid that doesn't use the normal classes. I'll get the dude that wrote it to take a look. Cheers kGlad.

Similar Messages

  • Blurry Text When Using Video out With FX 5900U

    I just got a MSI Geforce FX5900Ultra VTD256, and i was trying to play games on my TV.  I used the S-Video to video (the yellow Cable) adapter and when im in the desktop, all the text is real blurry, i cant even read it.  I tried lowering the resolution to see if that would make it easyer to read, but it didnt work.  Can someone please help.  Maybe the is somthing wronge with me TV???

    Hi,
    TV sets have lower resolution and bandwidth than PC monitors - the two are sort of related, but are not quite the same thing.
    Resolution is often measured in "lines", meaning the number of individual vertical lines that could be displayed across the width of the TV and still be distinguishable as individual lines. A figure of 800 lines was considered pretty good, and could usually only be achieved in a TV studio, from a camera direct to a monitor. So 800 pixels is about as much as a TV (especially a smaller one) can reasonably display. (The vertical resolution depends on the TV standard, and is about 600 lines or pixels for PAL, and about 500 for NTSC)
    The other factor is Bandwidth, which is measured in Megahertz (MHz). Basically, the finer the (horizontal) detail, the more bandwidth you need in the path between the source and the picture tube to display it faithfully. Broadcast TV is deliberately limited to about 5MHz, whereas a computer monitor will have several tens of MHz of bandwidth.
    Also, the chrominance (colour) component of a composite or S-Video signal is limited to less than 2 MHz, so fine colour detail will be worse off (Black on white or vice-versa will give best results).
    Anyway, the practical outcome of all this is that the highest resolution you can use for TV out is 800x600, and even then you need to use larger fonts (so the vertical lines are thicker, and there are a reasonable number of horizontal lines in a character).  The maximum number of characters per line should be less than 60-80.
    There are some scan-converters available which use fancy techniques to render a reasonable image at higher resolutions, but they are fairly expensive.
    S-Video should give better results than composite, but you will still be up against bandwidth and resolution limits
    Cheers

  • Blurry text when exporting PDF to jpeg or png

    Hello. Has anyone had a similar problem and found a way to deal with it as this?
    I get a PDF from someone in marketing and need to convert it to an image and resize so it can be emailed as a newsletter/bulletin. They want the entire thing to be an image.
    In Acrobat I export to jpg or png, then resize to 800 px wide (in photoshop). Sometimes this comes out alright. Usually some part of the text gets very blurry - usu. as distorted cloudiness in the background color or whitespace around the text.
    I'm much more a coder than a graphics person, but I need to learn if i can make this look good for them. Thanks in advance if you have any ideas.

    Not sure about Acrobat Pro 8, but in Acrobat Pro 9 (not Extended) you can Export>Image>Multiple Choice: JPEG, JPEG2000, PNG, TIFF.  I used JPEG and under the options in the export dialog box, leave the filename as is to coincide with the PDF filename and then choose Maximum Resolution under File Settings: Grayscale (JPEG, Quality:Maximum); Color (JPEG, Quality:Maximum) . . . skip down to Conversion Colorspace: Determine Automatically and Resolution choose 600pixels/inch for a letter size document.  This will result in a file size of 1.3MB per JPEG image if there is not a lot of information on the page.  I chose a simple header, footer with page numbering, and 5 lines of Lorem Ipsum text.  600dpi is overkill, you can go for 300dpi and still result in a decent image that will be able to be printed on a laser photocopier that is connected to a production computer.  Obviously if you are printing to a laser printer or a high quality inkjet 300dpi will suffice as well for a letter sized document.  But I have been told that 300dpi is not a standard rule of thumb and you must obtain specs from your printer since he/she can calculate by very strict rules the dpi you need for your content.  It depends on whether you have background images such as watermarks and also if your text body contains line-art.

  • I want  to display a text when button pressed

    Hi guys
    I want to display a text when a button is pressed , but the compiler says cannot resolve variable text ,can you please help me
    here is my program
    import  java.awt.Color .*;   import java.awt .*; import java.awt.event.*; import java.awt.event.*;   import javax.swing.*; import javax.swing.JTable.*;   public class sannaa extends JFrame implements  ActionListener {[code] public sannaa( )  {
    super("����� ������" ); setLayout(new FlowLayout()); TextField text = new TextField(20); JButton ok=new JButton( "return"   ); add(text); ok.addActionListener(this);  
    Container   contentPane  =  getContentPane(    ); 
    JLabel hellolabel=new JLabel("google"); hellolabel.setForeground(Color.black); hellolabel.setBackground(Color.blue);   String[ ] columnNames =
    {"First Name",   "Last Name", "Sport",
                             "# of Years",
                             "Vegetarian"};
                            Object [    ][     ] data =
    {"Mary", "Campione", "Snowboarding", new Integer(5), new Boolean(false)},
    {"Alison", "Huml", "Rowing", new Integer(3), new Boolean(true)},
    {"Kathy", "Walrath", "Knitting", new Integer(2), new Boolean (false)},
    {"Sharon", "Zakhour", "Speed reading", new Integer(20), new Boolean(true)},
    {"Philip", "Milne", "Pool", new Integer(10), new Boolean(false)} };
    JTable table = new JTable(data, columnNames); JButton enter=new JButton( "search"   ); ok.setBackground(Color.pink); ok.setForeground(Color.white); JFrame frame=new JFrame("EL  "); enter.setMaximumSize(new Dimension(900,
                                           100)); enter.setForeground(Color.blue); contentPane.setBackground( Color.white); for(int i=0;i<10;i++) {[code]JButton rami=new JButton( ""+ "" +i );
    contentPane.add(rami);
    rami.setBackground(Color.blue); }
    contentPane.add(ok);
    JPanel panel=new JPanel(new BorderLayout(500,500) ); contentPane.setLayout(new FlowLayout( )); contentPane.add(panel); panel.add(enter,  BorderLayout.PAGE_START); panel.add(table, BorderLayout.PAGE_START); panel.add(hellolabel,  BorderLayout.PAGE_START); panel.setBackground( Color.white ); panel.setLayout(new BorderLayout()); panel.add(table.getTableHeader(),BorderLayout.PAGE_START )  panel.add(table, BorderLayout.CENTER); panel.add(hellolabel,BorderLayout.PAGE_END);   setVisible(true); }
    public void actionPerformed(ActionEvent   e  ) {  [code] text.setText("Button Clicked ");
    public static void main (String [] args) {[code] sannaa van=new sannaa( );
    } }  

    Thanks
    I have changed my program to the following and its compiled truely, but when I press thte button in the application no text appeared?
    help me please
    import  java.awt.Color .*;   import java.awt .*; import java.awt.event.*; import java.awt.event.*;   import javax.swing.*; import javax.swing.JTable.*;    public class sannaa extends JFrame implements  ActionListener { 
    public sannaa(   ) {
    super("����� ������" ); JButton ok=new JButton( "return"   );
    ok.addActionListener(this);  
    Container   contentPane  =  getContentPane(
    JLabel hellolabel=new JLabel("google");
    hellolabel.setForeground(Color.black); hellolabel.setBackground(Color.blue);
        String[ ] columnNames =
    {"First Name",   "Last Name", "Sport",
                             "# of Years",
      "Vegetarian"};
                            Object [    ][     ] data =
    {"Mary", "Campione", "Snowboarding", new Integer(5),
    new Boolean(false)},
    {"Alison", "Huml", "Rowing", new Integer(3), new
    Boolean(true)},
    {"Kathy", "Walrath", "Knitting", new Integer(2),
    new Boolean (false)},
    "Sharon", "Zakhour", "Speed reading", new
    Integer(20), new Boolean(true)},
    {"Philip", "Milne", "Pool", new Integer(10),
    new Boolean(false)} };
    JTable table = new JTable(data,
      columnNames); JButton enter=new JButton( "search"
         ); ok.setBackground(Color.pink); ok.setForeground(Color.white); JFrame frame=new JFrame("EL  "); enter.setMaximumSize(new Dimension(900,
      100));
    enter.setForeground(Color.blue); contentPane.setBackground( Color.white);
    for(int i=0;i<10;i++) {  [code]JButton rami=new JButton( ""+ "" +i );
    contentPane.add(rami);
    rami.setBackground(Color.blue); }
    contentPane.add(ok);
    JPanel panel=new JPanel(new
      BorderLayout(500,500) ); contentPane.setLayout(new FlowLayout(
      )); contentPane.add(panel); panel.add(enter,  BorderLayout.PAGE_START);
      panel.add(table,
      BorderLayout.PAGE_START); panel.add(hellolabel,
       BorderLayout.PAGE_START); panel.setBackground( Color.white ); panel.setLayout(new BorderLayout());   panel.add(table.getTableHeader(),BorderLayout.PAGE_START ) ;
       panel.add(table, BorderLayout.CENTER);
    panel.add(hellolabel,BorderLayout.PAGE_END);
       setVisible(true); }
    public void actionPerformed(ActionEvent   e  )
      {  [code] TextField text=new TextField ("") ;
    text.setText("Button Clicked     ");     }
    public static void main (String [] args)
    sannaa van=new sannaa( ); } }  

  • Lumia 925 blurry text while scrolling

    Noticed that my lumia 925 has a blurry text while scrolling, specially when scrolling white text over black background or black text over white background... also noticed some blurry when scrolling tiles on the home screen, this blurry occurred around the black horizontal lines separating the tiles.... compared the scrolling with the 920 and there is a huge difference...
    I read that some of the galaxy S4 units has this problem and that this problem related to Samsung AMOLED screens, and you know the lumia 925 has a Samsung AMOLED screen.
    Any one has these issues? let me know in comments please..

    I have the same issue with L1020.
    I am extremely annoyed and disappointed at Nokia for messing up the PERFECT display of L920.
    After using L920 for months and laughing at lower quality displays of other phones, this L1020 display feels like those typical phone displays.
    Are nokia engineers so incompetent or everyone of them have vision issues that you ship a phone with such s**t quality?

  • ItemFocusOut called twice when you are using datagrid

    Have you ever encountered itemFocusOut called twice when you
    are using datagrid. I use this event to check the text that has
    been entered.
    Also when I use regex expressions
    if((event.itemRenderer as TextInput).text.search(new
    RegExp(/.*\..*\./)) != -1){
    in the itemFocusOut method and someone enters
    234.34.234
    I get an error
    TypeError: Error #1009: Cannot access a property or method of
    a null object reference.
    at
    mx.controls::DataGrid/destroyItemEditor()[C:\autobuild\3.2.0\frameworks\projects\framewor k\src\mx\controls\DataGrid.as:4000]
    at
    mx.controls::DataGrid/itemEditorItemEditEndHandler()[C:\autobuild\3.2.0\frameworks\projec ts\framework\src\mx\controls\DataGrid.as:4897]
    at flash.events::EventDispatcher/dispatchEventFunction()
    at flash.events::EventDispatcher/dispatchEvent()
    at
    mx.core::UIComponent/dispatchEvent()[C:\autobuild\3.2.0\frameworks\projects\framework\src \mx\core\UIComponent.as:9298]
    at
    mx.controls::DataGrid/endEdit()[C:\autobuild\3.2.0\frameworks\projects\framework\src\mx\c ontrols\DataGrid.as:4041]
    at
    mx.controls::DataGrid/mouseDownHandler()[C:\autobuild\3.2.0\frameworks\projects\framework \src\mx\controls\DataGrid.as:4296]
    Could some be so kind as shed some light on this
    situation

    I've worked around the error. I had something to do with the
    fact that the event was being twice and I worked my handling code
    around to avoid the error. However the problem with the event still
    remains. I think it is because the data it in the grid is being
    refreshed intentially after the code in the itemFocusOut is called
    that is cause the second event to fire.

  • Fix for blurry text on Dell 30" U3014 connected by DisplayPort to Mac Pro (late 2013) AMD D700

    Just connected my new Mac Pro (late 2013) to my Dell 30" U3014 with DisplayPort cables, only to find blurry text and bad gamma etc.
    Whilst the earlier post/discussion Mac Pro (8 core with the D700 GPU's) (Dell U2713H) was somewhat illumative, I thought a simple list of links for this specific configuration might help someone.
    The Ruby script, modified for D3014 can be found at post http://embdev.net/topic/284710#3153072
    If you're impatient like me, don't forget to copy the created Folder to /System/Library/Displays/Overrides before rebooting.  Thanks to Blurry text on Dell Monitor + Mac OS X | Danilo Ercoli
    Piers

    Hi Grant,
    Thanks for taking the time to think about my issue and respond. But I don't see where your response is relevant.
    I want to connect two monitors, each via Mini-Display Port, and only one will work at a time. I am not using DVI cables at all. In this article, http://support.apple.com/kb/HT6068, it clearly states that I can connect three monitors via Thunderbolt (mini-display port) as long as they're on different busses. I was doing that, and it didn't work.
    What display configurations can I use with my Mac Pro (Late 2013)?
    You can connect up to six displays to your Mac Pro (Late 2013) running Windows 8 via Boot Camp. Check the list below to be sure you're setting up your displays in a supported configuration via the HDMI and Thunderbolt ports.
    You can connect:
    Six Apple LED Cinema Displays (27-inch) or third-party displays via Thunderbolt. For best results, attach displays to different Thunderbolt busses when possible (see figure below).
    Three Apple Thunderbolt Displays (27-inch). Connect only one per Thunderbolt bus (see figure below). Note: You could connect three more LED Cinema Displays (27-inch) or third-party displays, one per Thunderbolt bus, for a total of six displays.
    Two Apple Thunderbolt Displays (on Thunderbolt bus 1 and 2) and one 4K Ultra HD TV using HDMI.
    Two 4K displays (on Thunderbolt buses 1 and 2) and one 4K Ultra HD TV on HDMI).

  • Responsive Scaling Blurry Text

    Hi all,
    I've been having a lot of problems with the built in responsive scaling but have found work arounds for all my issue's except one, the blurry text.  I presume it's common that people find text becomes a little blurry when responsive scaling is implemented (on certain browsers).  Is there a work around for this to prevent it from happening?  I have done a lot of searching but not found anything at all, other than a comment by adobe that it's a browser issue.
    Thanks

    Hi there,
    Here is the practice site i've been working on:
    COMPCADEMY - Computer Systems
    If you look at this site using Chrome for example much of the text is not crisp at all.  If you load it in Internet Explorer though it's perfect.
    Thanks

  • Fuzzy/blurry text in Captivate 7

    Hi alll,
    We recently upgraded from Captivate 6 -> 7. Usually we use transparent text boxes for text, and when publishing in Captivate 7, the text gets blurry/fuzzy, regardless of color, size, font etc. We had the same problem in an earlier version of Captivate (I think maybe it was Captivate 3), and the workaround then was to highlight at least one charachter within each text box, but this does not work in Captivate 7.
    Funny thing is that if I just drag the generated .htm file into my browser window, the text is crisp and clear, but when I run the same module from our LMS, it all gets blurry and fuzzy.
    Any help to avoid this would be very appreciated.

    Captivate text displaying blurry has been an issue since day one. I've had to deal with it and spend dozens of hours of R&D to try to figure it out... and as you see I'm still searching for an answer. It seems soooo simple but it must be extremely complex because Adobe just can't figure it out! It was the same thing in Flash. We are a global org producing e-learning for fortune 500 companies and at one point Captivate was our most used tool. Due to this issue and a bunch of others, our shop is now doing 75% of our projects in Storyline, 20% in Lectora, and we have ZERO clients asking for Captivate for the last 2 years. When a client spends tens of thousands of dollars on a project, they don't want to have to look at blurry, jagged text. I wish it wasn't this way because I am a highly experienced Cp developer now having to learn Storyline. But Adobe has either ignored this issue or just cannot fix it. In the image below, you can see the differences in the way Captivate displays text and the horrifying difference between Cp and Flash that I just don't get. That one causes a huge issue when we drop Flash stuff in a Cp slide and are required to stay consistent with font type and size.
    Keep in mind, the problem everyone is frustrated about is mainly text that uses Transparent style caption. It appears better when in a styled caption bubble. The blurry text issue can be somewhat fixed by applying a white highlight on all the text. Although, it is still not what we are looking for. And, this extra step in development is painful, costly, and there is always a few that we miss and then we get complaints, etc.
    Man, that first one is just nasty!
    One last thing I discovered that works, but not all of the time, is that if you create a dummy variable with no value, then put your text in a transparent text caption, add a few spaces at the end and then insert that variable, you will see crisp, clean text as if it was html. Again, too much work and not a consistent solution!!
    Hope that helps for those who are new to captivate, and for those like me, who have lost too many hours of precious life and money on this.
    See ya, have to continue my Storyline training now...

  • Aligning text in a textfield

    Hi every body,
    I am new to java, and I would like to know if it is possible to align the text in a textfield(i.e., left or right justification). I am not using swings..., The textfield is working fine..., but I want it to be right justified since I am accepting a integer value. Any help would be appreciated.

    You would have to programatically do it with spaces.
    For instance, if 5 characters wide,
    pad with 5 spaces.
    When the user types a number, on the listener, pad with 4 spaces, and move the entry to the 4th spot.
    repeat.
    I wouldn't go to the trouble. Instead use a read only field with a up/down button or use a slider to input the values.

  • Blurry Text and Incorrectly rendered colors in 8,1

    Ok...I'm at my wits end with this lap top.  I have tried everything.  I fixed it once...for about 48 hours, and then it went right back to the way it was.  
    Problem:  My laptop (HP Envy with windows 8.1) exhibits the common blurry text problem that everyone complains about.  However, there's an additional problem with mine.  The colors are all off.  Reds show up as greens, greens show up
    as reds.  It's a mess.  I can't even watch a movie on this thing cause it looks like a different planet!
    I have downloaded all the newest latest greatest drivers for my graphics card.  I have went to the manufacturers website and searched for drivers and downloaded them.  I originally had W8.  I downloaded and installed W8.1.  No change.
     My graphics card is the AMD Catalyst.  I upgraded it.  
    When I fixed this thing the first time, I THINK the thing that did it was to go into Control Panel to uninstall programs.  My AMD catalyst, when I clicked on it gave the option to "repair".  So I hit that.  When I restarted...my
    colors and text were perfect.  For about two days.  Now it's back to it's former crappyness.  I tried that again to no avail.  
    I've tried all the "de-scaling" crap that has been suggested on various forums.  Nada.  
    Someone please help me with this.  I'm deployed overseas and my laptop is my lifeline over here.  

    Go through the step by step instructions as sited here:
    How-To Uninstall AMD Catalyst™ Drivers From A Windows® Based System
    There is also a
    standalone uninstallation utility will clean your system of any existing AMD Catalyst drivers to prepare your PC for the clean installation of a new driver version.
    Once the driver uninstalled visit AMD's website to download and install the latest compatible driver.
    Right click your desktop.
    Choose AMD Catalyst Control Center
    Locate 3D Application Settings (under gaming)
    Locate Morphological Filtering.
    Make sure it is off.
    S.Sengupta, Windows Entertainment and Connected Home MVP

  • I've been using Aperture now for the past 7 months and really happy with it, however in the past two days any photos I download are heavily pixelated and blurry. When I download the same shots to any other program they are fine.

    Hi,
    I've been using Aperture now for several months without any issues except for the last couple of days...when I now download my shots from the memory card the photos are heavily pixelated and blurry but when loaded to iPhoto they are fine.
    Can someone tell me what the problem could be and how to fix it.

    Is Aperture doing any processing?  ("Window→Show Activity" -- anything there?)
    Are the Images pixilated/degraded when shown in the Viewer as well as in the Browser?  (Double-click an Image to open it in the Viewer.)
    How 'bout at 100%? (In the Viewer, press "z" to zoom to 100%.  The "z" key toggles the zoom.)
    Does generating a new Preview remove the pixilation?  (Select an Image in the Browser, hold down "{Option}" and click "Photos→Generate Preview".)

  • How do I select the entire text when the focus is moved to one TextBox?

    How do I select the entire text when the focus is moved to one TextBox?
    There are three TextBoxes.  I use <TextBox TabIndex="1"/> to set the order they are selected.  When I enter one specific TextBox, I would like to have the entire text selected ... one key stroke removes all of the text in that TextBox.
    bhs67

    I do it the following way:
    1.  Override the OnStartup for the application.  Use the following code: (VB.NET)
    EventManager.RegisterClassHandler(GetType(TextBox), TextBox.GotFocusEvent, New RoutedEventHandler(AddressOf TextBox_GotFocus))
    2.  In the event handler use this code (again VB.NET)
    Private Sub TextBox_GotFocus(ByVal sender As Object, ByVal e As RoutedEventArgs)
    _theTextBox = CType(sender, TextBox)
    If setFocusTimer IsNot Nothing Then
    RemoveHandler setFocusTimer.Tick, AddressOf setFocusTimer_Tick
    End If
    setFocusTimer = New DispatcherTimer
    setFocusTimer.Interval = TimeSpan.FromMilliseconds(10)
    AddHandler setFocusTimer.Tick, AddressOf setFocusTimer_Tick
    setFocusTimer.Start()
    End Sub
    Private Sub setFocusTimer_Tick(ByVal sender As Object, ByVal e As System.EventArgs)
    setFocusTimer.Stop()
    _theTextBox.SelectAll()
    End Sub
    What this does is register a handler for every textbox in your application.  This will execute when the GotFocus event is raised and will allow you to do whatever (in this case select all) you want.  A great way of handling things at the application
    level.
    Lloyd Sheen

  • How can i show input text when no row present in database.

    Hi All,
    I am using Jdeveloper 11g Release1(11.1.1.4.0)
    I have created EO and VO which is based on that EO.
    By using Vo i have designed .jspx page ,on that page i have taken adf form which is based on that VO.
    My problem is when database table is blank (i.e zero row) then input text on page not displayed.
    I want to show blank input text when such condition occurs.
    Thanks
    Imran.

    Hi,
    You can set ExecuteWithParams as default activity in the task flow then method activity to return total no of rows passing to Router activity if your method has value 0 then call Create insert operation else do directly to page.
    Following idea could be your task flow
    Execute With param (default) > SetCurrentRowWithKey > GetTotalNoOfRows (VOImpl Method)
    |
    v
    Router
    1. If pageFlowScope outcome is 0 then call CreateInsert > MyPage
    2. if pageFlowScope outcome > 0 then MyPage
    hope it helps,
    Zeeshan

  • Since I downloaded the new update on my iphone 4s I no longer see the delivered message under my text when sent.  Also the message is green instead of blue.  Does anybody know how to fix this?

    Since I downloaded the new update on my iphone 4s I no longer see the delivered message under my text when sent.  Also the message is green instead of blue.  Does anybody know how to fix this?

    You are sending SMS messages. iMessages are blue. Go to Settings>>Messages>>iMessage ON.

Maybe you are looking for