Blurry Tiff images

Hi,
As a new Motion user I'm having some issues with my first project. I've used After Effects since version 2-3 so I know my way around similar apps.
I've imported an uncompressed movie from FCP5.0.4 and I need to overlay a series of 6 images starting every 60 seconds with each image staying visible for 5 seconds. All sounds easy and is pretty easy except the tiff images are not sharp.
Each original tiff has a 1 pixel white border which turns to a 2-3pixel blurred grey border when I bring them into Motion 2.0.1 If I open them in the viewer or Quicktime they are perfectly sharp. I've turned off field rendering, have full resolution on etc. But just can't get the images as sharp as they should be.
The underlying movie is perfect though. Any help would be most appreciated.
Matt

Check the center position. If you just dropped it in place, you may be between pixels. Your TIFFs will be rasterized in Motion using a completely different function than AE uses. And you really should try to output to your target media and evaluate the movie carefully there. You may just be seeing artifacts created by your graphics card.
Wish I had a definite answer for you, hopefully one of the wonks will drop by within a few hours. Hope you get it fixed, Motion is really confusing for AE users.
bogiesan

Similar Messages

Tiff images I used in trial version are now blurry in full version of InDesign CS5.5

I placed two tiff images (visual poems I made) into a file (a manuscript) using a trial version of InDesign CS5.5, and they appeared clear and crisp. Then I bought the full version of InDesign (the Education product as part of Adobe Creative Suite), opened the file, and the two tiff images are completely blurry!
When I open the tiffs in photoshop and view them as "actual pixels," they are clear and crisp. The resolution is 300. For one image I tried making it a lower resolution, and that didn't help.
Any ideas? Thanks.

Hi, I just unchecked the Object Level Display and nothing happened.
Nothing has changed with the images at all. The only thing that is different is that I created the manuscript in a trial version of the software. Maybe it was an earlier version than the software I purchased? Would that have an effect on the images? I didn't purchase the software directly from the trial version I used. What happened is that the trial version expired. Then a month later or so I bought a new laptop, bought the Creative Suite (Education version, so much cheaper than normal), and then installed the software on the laptop. Then I opened my manuscript using the new software, the CS5.5, and everything was fine except for the images being blurry.
Is it possible I used a trial version in CS5.0 and then bought CS5.5 and that has something to do with it?
Thanks for all of your help!!
I just realized I wasn't logged in & that's why I couldn't reply.
Message was edited by: patawhateverly

Stamping tiff images

Hello,
I'm looking for a way in Java to stamp tiff images. The images have the following criteria: format A4, single page, black and white, g4 compressed, single strip offset. A formatted number has to be added in the right upper corner of each image.
Could somebody give me a clue please how I can create a tiff-image from a String/a number and merge this image with the original image? I'm searching for an hour now but obviously I don't know the right key-words.
Thank you!
wowasa

Hi, I just unchecked the Object Level Display and nothing happened.
Nothing has changed with the images at all. The only thing that is different is that I created the manuscript in a trial version of the software. Maybe it was an earlier version than the software I purchased? Would that have an effect on the images? I didn't purchase the software directly from the trial version I used. What happened is that the trial version expired. Then a month later or so I bought a new laptop, bought the Creative Suite (Education version, so much cheaper than normal), and then installed the software on the laptop. Then I opened my manuscript using the new software, the CS5.5, and everything was fine except for the images being blurry.
Is it possible I used a trial version in CS5.0 and then bought CS5.5 and that has something to do with it?
Thanks for all of your help!!
I just realized I wasn't logged in & that's why I couldn't reply.
Message was edited by: patawhateverly

Blurry tiff's!

Hello there, wondered if anyone has ideas why my tiff images are blurry on dvd after burn, but crystal on the idvd preview?
The images are part of the background menu.
Im using idvd5, the theme is 'Reveal' from 4.0.
There is also a .mov playing in the back too.
Any ideas?
Thanks for your time in advanced!
D

Are you viewing the burned DVD on your computer, or on a television screen? DVD is, after all, designed for TV viewing ... much lower resolution than your computer monitor. And DVD format is compressed, so it does not have all of the information that was part of the original source material.

A generic error occurred in GDI+ while assing tiff image file to Bitmap and Image

Hi,
I am getting "A generic error occurred in GDI+" error while reading the tiff image file to Bitmap or Image.
Below is my sample code.
string filePath=@"c:\Images\sample.tif";
Bitmap bmp=new Bitmap(filePath); // here getting exception
int totalpages=bmp.GetFrameCount(.....);
etc......
I tried using Bitmap.FromFile() and also from FromStream() even for Image also but there is no use.
Moreover i m having full permissions for the file path and the tiff file is having multiple pages.
Can anyone help me to solve this issue please.
Thanks & Regards,
Kishore
Kishore

Make sure that the Tif file is valid (can other software open it)? If you are able to save a Tif using GDI+, try saving that Tif, then opening it. Part of me wonders if there is something about that specific Tif that GDI+ doesn't like.
You could also try using WIC to open the TIF, perhaps you would have better luck there.

How to add a text Component ( text annotation) to the Tiff Image

Hi.............
This is the first time I am using Sun Developers Forum.......................
My problem is.............I want to add a component ( Text or Label ) to the Tiff Image which is displayed on the JIMICanavs [ from JIMI API ].
Even , if anybody knows about How to add a component to the JIMICanavs , Please help me..................................

I'm curious: is JIMI still popular? What advantange does it have over the current Java 2D support in the J2SE, or over JAI?

How can I merge two TIFF images in one...?

I need some help please, I am looking for a way to "resize" black & white single TIFF images.
The process I need to do is like cutting a small image and paste it over a new blank letter-size image (at 300 dpi), like a template.
Or better yet, is there a way to do something like this...?
Open image...
image.*width* = 2550;
image.*height* = 3300;
image.save();Some APIs and topics in the internet do or talk about resizing, but the final images get stretched or shrinked and I need them not to do so at all.
Also, I do not need to display the images, only to get the TIFF images processed and saved back to a file.
How can I do this with Java and JAI? Unfortunately I am almost new to this and I don't know how difficult it might be to deal with images.

If 2550 x 3300 isn't the original aspect ratio of the image, then the image is going to looked streched or shrinked in at least one dimension. There is no way around that. It would be like resizing a 2 pixel by 2 pixel image into a 3 pixel by 6 pixel image. The image would look like it's height shrunk or it's width stretched. Had I resized it to 3 pixels by 3 pixels or 6 pixels by 6 pixels, though, then it wouldn't look shrunken or streched.
Open image...
image.*width* = 2550;
image.*height* = 3300;
image.save();*1)* To open a TIFF image you can use the javax.swing.ImageIO class. It has these static methods
read(File input)
read(ImageInputStream stream)
read(InputStream input)
read(URL input) You can use which ever method you want. But first you need to install [JAI-ImageIO|https://jai-imageio.dev.java.net/binary-builds.html]. The default ImageReaders that plug themselves into the ImageIO package are BMP, PNG, GIF, and JPEG. JAI-ImageIO will add TIFF, and a few other formats.
The downside is that if clients want to you use your program on their machine then they to will need to install JAI-ImageIO to read the tiffs. To get around this, you can go to your Java/jdk1.x.x_xx/jre/lib/ext/ folder and copy the jai_imageio.jar file (after you've installed JAI-ImageIO). You can also obtain this jar from any one of the zip files of the [daily builds|https://jai-imageio.dev.java.net/binary-builds.html#Daily_builds]. If you add this jar to your program's classpath and package it together with your program, then clients won't need to install JAI-ImageIO and you'll still be able to read TIFF's. The downside of simply adding the jar to the classpath is that you won't be able to take advantage of a natively accelerated JPEG reader that comes with installing JAI-ImageIO (instead, ImageIO will use the default one).
*2)* Once you've installed [JAI-ImageIO|https://jai-imageio.dev.java.net/binary-builds.html] and used ImageIO.read(...), you'll have a BufferedImage. To resize it you can do the following
BufferedImage newImage = new BufferedImage(2550,3300,BufferedImage.TYPE_BYTE_BINARY);
Graphics2D g = newImage.createGraphics();
g.setRenderingHint(RenderingHints.KEY_INTERPOLATION, RenderingHints.VALUE_INTERPOLATION_BILINEAR);
g.drawImage(oldImage,0,0,2550,3300,null);
g.dispose();Here, I simply drew the old image (the one returned by ImageIO.read(...)) onto a new BufferedImage object of the appropriate size. Because you said they were black and white TIFF's, I used BufferedImage.TYPE_BYTE_BINARY, which is a black and white image. If you decide to use one the BufferedImage types that support color, then a 2550x3330 image would require at least 25 megabytes to hold into memory. On the other hand, a binary image of that size will only take up about one meg.
I specified on the graphics object that I wanted Bilinear Interpolation when scaling. The default is Nearest Neighbor interpolation, which while fast, dosen't look very good. Bilinear offers pretty good results scaling both up or down at fast speeds. Bicubic interpolation is the next step up. If you find the resized image to be subpar, then come back and post. There are a couple of other ways to resize an image.
Note, however, if 2550 x 3300 is not the same aspect ratio as the the TIFF image you loaded, then the resized image will look shrunk or stretched along one dimension. There is absolutely no way around this no matter what resizing technique you use. You'll need an image whose original dimensions are in a 2550/3300 = .772 ratio if you want the resized image to not look like it's streched (you can crop the opened image if you want).
*3)* Now we save the "newImage" with the same class we read images with: ImageIO . It has these static methods
write(RenderedImage im, String formatName, File output)
write(RenderedImage im, String formatName, ImageOutputStream output)
write(RenderedImage im, String formatName, OutputStream output)You'll suply the resized BufferedImage as the first parameter, "tiff" as the second parameter and an appropriate output for the third parameter. It's pretty much a one line statement to read or write an image. All in all, the whole thing is about 7 lines of code. Not bad of all.
Now as for the 300 dpi thing, there is a way to set the dpi in the Image's metadata. I'm pretty good at reading an image's metadata, but I've never really tried writing out my own metadata. I know you can set the dpi, and I have a somewhat vague idea how it might be done, but it's not something I've tried before. I think I'll look more into it.

How do I Convert a Tiff image to a jpeg without being FORCED to 8-bit Color?

I am an Artist. I have High quality TIFF images. When I convert the tiffs to jpeg it forces me into 8-bit color automatically. (Forget about 32bit - it will not allow me to jpeg that at all) The only way I can get back to 16bit color is to use the already SMAshed file and bring it up to 16bit. THIS makes NO sense. Once the jpeg is smashed, HOw in the world is it supposed to convert up again. ?? Then even though it says you converted the file to 16 -bit , the metadata refers still to the file as 8-bit.
On top of all of that confusion, One picture, for example, when supposedly converted to 16bit, gets much BRighter then even the original Tiff image. It looks good on one hand and over exposed on the other. I assume that is photoshop throwing in fake resolution, am I right?
Am I wasting my time with this imaginary 16bit conversion?
Is there ANY way to take that original Tiff image and convert it to 16bit jpeg without the Default 8bit? I have been trying all kinds of things. I even have asked my web guy. My web guy says that 8-bit is unexceptable for printing, even for web.
Could this have anything to do with my computer and scanner?
I have the iMAC OS X 10.8.3 (3.2 GHz) 8 GB memory.
And I also have an Epson Expression 10000XL graphic arts scanner capable of scanniing at 48bit color.
This color stuff Really matters! It MATTERS! I HAve FINE art files. I am already losing so much quality with the jpeg conversion. (which I am required to do for SmugMug, in addition to compressing all my files to 50mb or Under)
Anyone who knows anything that could help me would be much appreciated.
Aloha,
-Melissa

First of all jpeg is 8 bit only there is no way to save as a 16 or 32 bit jpg, just does not exist. Secondly people print in 8 bit all the time and most if not all web graphics are in 8 bit as that is the only way to view it as there is no 16 bit or 32 bit monitors to view it. All but a few pro monitors are 8 bit monitors.
If you care about the color gamut and want the full range of color that 16 and 32 bit provide, then why jpg? Jpg by its own nature throws out color just to compress, thats why it is popular on the web, because of its small file size not its quality. If you need 16 or 32 bit for anything it must be in a format that supports that color depth.
That being said a jpg image at 8 bit will display 16+ million colors, 256 shades of red, 256 shades of green and 256 shades of blue.
Now here is where I think your bit information is off. a jpg image is a 24 bit image that will produce 8 bits of red, 8 bits of green and 8 bits of blue.
The 8, 16 and 32 are per channel not total color information.
If the overall image was 8 bits, the image would be gayscale.

Java returning incorrect values for width and height of a Tiff image

I have some TIFF images (sorry, I cannot post them b/c of there confidential nature) that are returning the incorrect values for the width and height. I am using Image.getWidth(null) and have tried the relevant methods from BufferedImage. When I open the same files in external viewers (Irfanview, MS Office Document Imaging) they look fine and report the "correct" dimensions. When I re-save the files, my code works fine. Obviously, there is something wrong with the files, but why would the Java code fail and not the external viewers? Is there some way I can detect file problems?
Here is the code, the relevant section is in the print() routine.
* ImagePrinter.java
* Created on Feb 27, 2008
* Created by tso1207
import java.awt.Graphics2D;
import java.awt.Image;
import java.awt.print.PageFormat;
import java.awt.print.PrinterException;
import java.io.File;
import java.io.IOException;
import java.util.Iterator;
import javax.imageio.ImageIO;
import javax.imageio.ImageReader;
import javax.imageio.stream.FileImageInputStream;
import javax.imageio.stream.ImageInputStream;
import com.shelter.io.FileTypeIdentifier;
public class ImagePrinter extends FilePrintable
 private final ImageReader _reader;
 private final int _pageCount;
 private final boolean _isTiff;
 //for speed we will hold current page info in memory
 private Image _image = null;
 private int _imgWidth = 0;
 private int _imgHeight = 0;
 private int _currentPage = -1;
 public ImagePrinter(File imageFile) throws IOException
 super(imageFile);
 ImageInputStream fis = new FileImageInputStream(getFile());
 Iterator readerIter = ImageIO.getImageReaders(fis);
 ImageReader reader = null;
 while (readerIter.hasNext())
 reader = (ImageReader) readerIter.next();
 reader.setInput(fis);
 _reader = reader;
 int pageCount = 1;
 String mimeType = FileTypeIdentifier.getMimeType(imageFile, true);
 if (mimeType.equalsIgnoreCase("image/tiff"))
 _isTiff = true;
 pageCount = reader.getNumImages(true);
 else
 _isTiff = false;
 _pageCount = pageCount;
 public int print(java.awt.Graphics g, java.awt.print.PageFormat pf, int pageIndex)
 throws java.awt.print.PrinterException
 int drawX = 0, drawY = 0;
 double scaleRatio = 1;
 if (getCurrentPage() != (pageIndex - getPageOffset()))
 try
 setCurrentPage(pageIndex - getPageOffset());
 setImage(_reader.read(getCurrentPage()));
 setImgWidth(getImage().getWidth(null));
 setImgHeight(getImage().getHeight(null));
 catch (IndexOutOfBoundsException e)
 return NO_SUCH_PAGE;
 catch (IOException e)
 throw new PrinterException(e.getLocalizedMessage());
 if (!_isTiff && getImgWidth() > getImgHeight())
 pf.setOrientation(PageFormat.LANDSCAPE);
 else
 pf.setOrientation(PageFormat.PORTRAIT);
 Graphics2D g2 = (Graphics2D) g;
 g2.translate(pf.getImageableX(), pf.getImageableY());
 g2.setClip(0, 0, (int) pf.getImageableWidth(), (int) pf.getImageableHeight());
 scaleRatio =
 (double) ((getImgWidth() > getImgHeight())
 ? (pf.getImageableWidth() / getImgWidth())
 : (pf.getImageableHeight() / getImgHeight()));
 //check the scale ratio to make sure that we will not write something off the page
 if ((getImgWidth() * scaleRatio) > pf.getImageableWidth())
 scaleRatio = (pf.getImageableWidth() / getImgWidth());
 else if ((getImgHeight() * scaleRatio) > pf.getImageableHeight())
 scaleRatio = (pf.getImageableHeight() / getImgHeight());
 int drawWidth = getImgWidth();
 int drawHeight = getImgHeight();
 //center image
 if (scaleRatio < 1)
 drawX = (int) ((pf.getImageableWidth() - (getImgWidth() * scaleRatio)) / 2);
 drawY = (int) ((pf.getImageableHeight() - (getImgHeight() * scaleRatio)) / 2);
 drawWidth = (int) (getImgWidth() * scaleRatio);
 drawHeight = (int) (getImgHeight() * scaleRatio);
 else
 drawX = (int) (pf.getImageableWidth() - getImgWidth()) / 2;
 drawY = (int) (pf.getImageableHeight() - getImgHeight()) / 2;
 g2.drawImage(getImage(), drawX, drawY, drawWidth, drawHeight, null);
 g2.dispose();
 return PAGE_EXISTS;
 * 
 * Created By: TSO1207 - John Loyd
 * @since version XXX
 * @return
 public int getPageCount()
 return _pageCount;
 public void destroy()
 setImage(null);
 try
 _reader.reset();
 _reader.dispose();
 catch (Exception e)
 System.gc();
 * 
 * Created By: TSO1207 - John Loyd
 * @since Mar 25, 2008
 * @return
 public Image getImage()
 return _image;
 * 
 * Created By: TSO1207 - John Loyd
 * @since Mar 25, 2008
 * @return
 public int getImgHeight()
 return _imgHeight;
 * 
 * Created By: TSO1207 - John Loyd
 * @since Mar 25, 2008
 * @return
 public int getImgWidth()
 return _imgWidth;
 * 
 * Created By: TSO1207 - John Loyd
 * @since Mar 25, 2008
 * @param image
 public void setImage(Image image)
 _image = image;
 * 
 * Created By: TSO1207 - John Loyd
 * @since Mar 25, 2008
 * @param i
 public void setImgHeight(int i)
 _imgHeight = i;
 * 
 * Created By: TSO1207 - John Loyd
 * @since Mar 25, 2008
 * @param i
 public void setImgWidth(int i)
 _imgWidth = i;
 * 
 * Created By: TSO1207 - John Loyd
 * @since Mar 25, 2008
 * @return
 public int getCurrentPage()
 return _currentPage;
 * 
 * Created By: TSO1207 - John Loyd
 * @since Mar 25, 2008
 * @param i
 public void setCurrentPage(int i)
 _currentPage = i;
}Edited by: jloyd01 on Jul 3, 2008 8:26 AM

Figured it out. The files have a different vertical and horizontal resolutions. In this case the horizontal resolution is 200 DPI and the vertical is 100 DPI. The imgage width and height values are based on those resolution values. I wrote a section of code to take care of the problem (at least for TIFF 6.0)
 private void setPageSize(int pageNum) throws IOException
 IIOMetadata imageMetadata = _reader.getImageMetadata(pageNum);
 //Get the IFD (Image File Directory) which is the root of all the tags
 //for this image. From here we can get all the tags in the image.
 TIFFDirectory ifd = TIFFDirectory.createFromMetadata(imageMetadata);
 double xPixles = ifd.getTIFFField(256).getAsDouble(0);
 double yPixles = ifd.getTIFFField(257).getAsDouble(0);
 double xRes = ifd.getTIFFField(282).getAsDouble(0);
 double yres = ifd.getTIFFField(283).getAsDouble(0);
 int resUnits = ifd.getTIFFField(296).getAsInt(0);
 double imageWidth = xPixles / xRes;
 double imageHeight = yPixles / yres;
 //if units are in CM convert ot inches
 if (resUnits == 3)
 imageWidth = imageWidth * 0.3937;
 imageHeight = imageHeight * 0.3937;
 //convert to pixles in 72 DPI
 imageWidth = imageWidth * 72;
 imageHeight = imageHeight * 72;
 setImgWidth((int) Math.round(imageWidth));
 setImgHeight((int) Math.round(imageHeight));
 setImgAspectRatio(imageWidth / imageHeight);
 }

Trying to display multipage tiff image getting error

Hi
I am trying to read multipage tiff image but dont know how
I tried to display single page tiff getting error
my code is
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Drawing;
using System.Drawing.Imaging;
namespace Documentviewer1
 public partial class _Default : System.Web.UI.Page
 //string filepath = "";
 protected void Page_Load(object sender, EventArgs e)
 //// filepath = "image\045237302.tif";
 string appath = Server.MapPath("/image") + @"\";
 string imagename = Request.QueryString["ImageFileName"];
 string filename = appath + imagename;
 Response.ContentType = "image/tiff";
 new Bitmap(filename).Save(Response.OutputStream, ImageFormat.Tiff);
 ////System.Drawing.Image TheImg = new App.Files.TIF(Request.QueryString["FilePath"]).GetTiffImageThumb(System.Convert.ToInt16(Request.QueryString["Pg"]), System.Convert.ToInt16(Request.QueryString["Height"]),
System.Convert.ToInt16(Request.QueryString["Width"]));//getting error in thisline Parameter not valid
my aspx page is has
<%@ Page Title="Home Page" Language="C#" MasterPageFile="~/Site.master" AutoEventWireup="true"
 CodeBehind="Default.aspx.cs" Inherits="Documentviewer1._Default" %>
<asp:Content ID="HeaderContent" runat="server" ContentPlaceHolderID="HeadContent">
</asp:Content>
<asp:Content ID="BodyContent" runat="server" ContentPlaceHolderID="MainContent">
 <h2>
 <img alt="" src ="image/045237302.tif" width="200" height="200"/>
 </h2>
 
 To learn more about ASP.NET visit <a href="http://www.asp.net" title="ASP.NET Website">www.asp.net</a>.
 
 
 You can also find <a href="http://go.microsoft.com/fwlink/?LinkID=152368&clcid=0x409"
 title="MSDN ASP.NET Docs">documentation on ASP.NET at MSDN</a>.
 
</asp:Content>
getting error as Parameter not valid.
Can anybody help me to display the image in the browser.
Thanks
Mary Abraham
Mary Sunish

Hi MaryAbraham,
Since the issue regards ASP.NET and website deployment. I suggestion you post the question in the ASP.NET forums at
http://forums.asp.net/. It is appropriate and more experts will assist you.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to retain the same resolution while croping a tiff image using jai api

Hi all,
I have designed a program to crop a tiff image.But after croping the tiff,the resultant file resolution is not the same as the original source file.
In the program,the source file Nadeshiko_v1_02.tif has the resolution(X) of 1200 DPI and resolution(Y) has 1200 DPI pixels.
But after croping the resolution of output file is 100 DPI.
Please give me some idea on how to retain the same resolution.
<code>
package jai;
import java.awt.Frame;
import java.awt.image.RenderedImage;
import java.awt.image.renderable.ParameterBlock;
import java.awt.image.renderable.RenderableImage;
import java.io.FileNotFoundException;
import java.io.FileOutputStream;
import java.io.IOException;
import javax.imageio.*;
import javax.imageio.stream.ImageOutputStream;
import javax.media.jai.Interpolation;
import javax.media.*;
import javax.media.jai.JAI;
import javax.media.jai.PlanarImage;
import javax.media.jai.RenderedOp;
import javax.media.jai.widget.ScrollingImagePanel;
import com.sun.media.jai.codec.FileSeekableStream;
import com.sun.media.jai.codec.SeekableStream;
import com.sun.media.jai.codec.TIFFEncodeParam;
import javax.media.jai.OperationDescriptorImpl;
import java.io.*;
import java.util.Iterator;
import javax.media.jai.operator.*;
// import javax.media.jai.widget.ScrollingImagePanel;
public class crop {
 /** The main method. */
public static void main(String[] args) {
/* Validate input. */
/* if (args.length != 1) {
System.out.println("Usage: java JAISampleProgram " +
"input_image_filename");
// System.exit(-1);
float a=(float) 70.3;
float b=(float) 70.4;
float c=(float) 3100.3;
float d=(float) 5522.4;
* Create an input stream from the specified file name
* to be used with the file decoding operator.
String TIFF="TIFF";
FileSeekableStream stream = null;
try {
 stream = new FileSeekableStream("D:\\tif images\\Nadeshiko_v1_02.tif");
// stream = new FileSeekableStream("D:\\tif images\\Nadeshiko_v1_01.jpg");
} catch (IOException e) {
e.printStackTrace();
System.exit(0);
// Load the source image from a Stream.
RenderedImage im = JAI.create("stream", stream);
RenderedImage image2= CropDescriptor.create(im, a, b, c, d, null);
ScrollingImagePanel panel = new ScrollingImagePanel(image2, 100, 100);
// Create a frame to contain the panel.
Frame window = new Frame("JAI Image Cropping");
window.add(panel);
window.pack();
// window.show();
// Define the source and destination file names.
// String inputFile = "D:\\tif images\\Nadeshiko_v1_05.tif";
String outputFile = "D:\\tif images\\Nadeshiko_v1_04.tif";
// Save the image on a file. We cannot just store it, we must set the image encoding parameters
// to ensure that it will be stored as a tiled image.
TIFFEncodeParam tep = new TIFFEncodeParam();
tep.setWriteTiled(true);
tep.setTileSize(80,80);
JAI.create("filestore",image2,outputFile,"TIFF",null);
try {
 stream.close();
 } catch (IOException e) {
 // TODO Auto-generated catch block
 e.printStackTrace();
</code>
Thanks,
Sanat Meher

Try the following,
TIFFEncodeParam tep = new TIFFEncodeParam();
// Create {X,Y}Resolution fields.
TIFFField fieldXRes = new TIFFField(0x11A, TIFFField.TIFF_RATIONAL,
 1, new long[][] {{DPI_X, 1}});
TIFFField fieldYRes = new TIFFField(0x11B, TIFFField.TIFF_RATIONAL,
 1, new long[][] {{DPI_Y, 1}});
tep.setExtraFields(new TIFFField[] {fieldXRes, fieldYRes});

How to edit 16bit TIFF image sequence file in FCP?

Dear all,
I have a number of 16 bit TIFF image sequence files (2048 x 1024 resolution) - some of them are RED footage, and others came directly from our f/x guy. We are going into a color correction session in a post house and we've been asked to provide a sequential 16 bit TIFF image sequence of the edited time line.
I need to do a cross dissolve b/w most of the clips I have. I have created image sequence QT movie (reference files) from the TIFF images. Though they play fine in QT player, when I try importing into FCP, I am met with a "general error". I tried both dragging it into QT, as well as File --> Import.
I am wondering what can I do to get these clips into FCP in order to apply the cross dissolve transitions I need. Is this a problem relating to the 16bit nature of the TIFF files?
I tried exporting the TIFF image sequence standalone QT movie, and those imported fine. However, I have a feeling that the standalone movie conversion also decrease my bit depth from 16 to 8. (When I do my final TIFF output from FCP after dissolves / transitions had been applied, each TIFF file is now 8 MB instead of 12 MB, hence my suspicion that the bit depth is adjusted).
Are there any settings I am missing, or does FCP simply don't support 16 bit image sequence reference file. As a test, I had also converted all my TIFF to jpg, and created jpeg image sequence reference file. These reference QT file can be successfully imported to FCP and I can edit them as if they are a clip.
If FCP is not able to handle these files, what are my other options? After Effects?
Any help is appreciated.
Thank you.
Michael
<Edited by Moderator>

As far as I know, both FCP and Color only support up to 10 bit color, which is 1024 levels for each color channel, more than enough for avoiding color banding.
If you need 16 bit for sure, I believe AE will support 16 bit output. Another 16 bit application would be the extended version of Photoshop, which has some limited time line capability.

Error encountered while reading TIFF image, Image may be damaged of incompatible. Resave the image w

I am currently running CS3, windows XP, service pack 2, with recent update, 5.03 installed today.
I just opened a 500 page document not in sections where 90% of the document is a placed PDF.
The PDFS were placed using a sample Script that came with Indesign, that instructs the PDF to automatically flow each page after another.
When scrolling through quickly in the pages pallette, I get the follwing error:-
"Error encountered while reading TIFF image, Image may be damaged of incompatible. Resave the image with different settings and try again."
I click OK.
Then I get the following error.....
" Could not complete request because of database error. The File "ABC.indd" is damaged (Error Code: 3).
Click OK....
Then I get the following error....
Adobe Indesign is shutting down. A serious error was detected. Please restart Indesign to recover work in any unsaved Indesign documents.
Then I get the error.......
Indesign.exe has encountered a problem and needs to close. We are sorry for any inconveneince.
And I have two buttons to click....
Debug or Close.....
If I click Debug, it closes Indesign.
Within this window there is also a window to gather further information....I click it and it tells me...
"Indesign.exe....Error Signature AppName: indesign.exe AppVer: 5.0.3.662
ModName: public.dll ModVer: 5.0.3.662 Offset: 0002e19a"
To view technical inforamtion about the error report, clikc here....
"Then it creates an error report and tells me where the report is located along with a scrollable window of 0xc0000005 and heap of zeros."
The report conatains a whole heap of CHECKSUM ERRORS.
CAN ANYONE PLEASE HELP??
I had these errors before updating to 5.03 and the patch hasn't rectified anything!!

Open the .inx file in CS3 (that's what you have, right?) and save as a new .indd.
I'd also be tempted to open the tiff in Photoshop and do a save as to re-write it.
Let us know if it helps.
Storing files on the network leaves you more open tot he risk of file damage during transfer and save operations.
Peter

Displaying TIFF images in Oracle Forms 6i

Hello, friends!
I am working in Oracle Forms 6.0.8 (that ancient tool) and encounter a problem with displaying TIFF images.
I have a number of scanned images and some of them are displayed and some are not. I've tried both extracting them from the database or from the file system (using READ_IMAGE_FILE). Sometimes I am getting just blank field in my image item and sometimes (after using READ_IMAGE_FILE) I get the error FRM-47100 (cannot read image file). Of course I've checked that all the files are displayed using standard tools for displaying TIFFs.
Basically the question is what kind of TIFF is considered valid and readable by Oracle Forms.
Analyzing TIFF tags actually gave me nothing: I have a pair of files with tags different only in image width/length and a number of rows/strip (but even those values are close), and one of the file is displayed correctly while the other is not. The thing I noticed is that invalid files are using compression type of CCITT Group 4.
Possibly Oracle Forms follows TIFF specification only to certain extent and does not support all the extensions, while sometimes the problems are not visible to user.
As a result of my work I need some automatic tool that converts undisplayable TIFF files to displayable ones but firstly I am to determine where the problem is. And it would be very good to have a prooflink that approves my decision.
Looking forward to any help! Thanks in advance.

Thanks to everybody, but I'm afraid my files don't contain any EXIF tags (although TIFF seems to support them). The file doesn't contain any tags with IDs greater than 0x7FFF but only core TIFF tags (with IDs of lower numbers). Moreover I have a file with exactly the same set of tags (but the values are a bit different) which is displayed properly.
I've shared the issued file (nondisplayable) on the following link: [https://rapidshare.com/files/3137807470/2.tif]
If anyone could tell me why isn't it displayed in Forms I would be very grateful.

MBA old gen. and Snow Leopard - TIFF images seen as blank in some web pages

After I upgraded to Snow Leopard, I see blank the TIFF images displayed in some web sites, like for example any patent image in the www.uspto.gov web site.
This happens on both Safari and Firefox. They both use the QuickTime plugin (I have version 7.6.3).
However, if I drag and drop the TIFF image and save it in the local hard drive, local applications like Preview display the page correctly.
It seems to be an issue with QuickTime and possibly the MacBook model (I have a first generation MacBook Air, with the GMA X3100 Intel graphic card).
Has anybody experienced this bug?

Any patent image in the www.upsto.gov web site. For example, this link goes to the first page of the U.S. Patent 161,739 Improvement in Transmitters and Receivers for Electric Telegraphs by A.G. Bell:
http://patimg1.uspto.gov/.piw?Docid=00161739&homeurl=http%3A%2F%2Fpatft.uspto.go v%2Fnetacgi%2Fnph-Parser%3FSect1%3DPTO1%2526Sect2%3DHITOFF%2526d%3DPALL%2526p%3D 1%2526u%3D%25252Fnetahtml%25252FPTO%25252Fsrchnum.htm%2526r%3D1%2526f%3DG%2526l% 3D50%2526s1%3D0161739.PN.%2526OS%3DPN%2F0161739%2526RS%3DPN%2F0161739&PageNum=&R type=&SectionNum=&idkey=NONE&Input=Viewfirstpage
All I see a blank page.

Blurry Tiff images

Similar Messages

Maybe you are looking for