Blurry Titles and text on HD 6.0!!!

hello everyone, I just got my new 12' powerbook and its my first mac ever... and I LOVE IT!!! I have no idea why I have been using pc all my life, macs are so much better!
anyways, onto the PROBLEM... I have the new ilife '06 and I have installed imovie HD 6 but when I try to add a title onto black (and I havent tried on clips) it turns out very fuzzy and very unprofesional... when I preview it, it looks great, but not when I add it to my timeline... CAN SOMEONE PLEASE HELP ME!!!!
thanks...

It's not a problem, it's an intention. You would need a quad g5 top of the line to run the video in full resolution in real time! Too much data, so they arteficially reduced the resolution in iMovie for us to be able to happily edit our movies on slower machines. Your final DVDs will look just fine, believe me, they simply will. Same with other codecs in .mov files for QT playback. If you choose any codec and the highest possible quality, you will get almost sharp titles. But not in iMovie itself. I personally have set up the lowest preview quality in iMovie, because I prefer application speed ahead of viewing quality. I rather look at fuzzy than jerky subtitles. But again, everyone has different opinion. The end product is what counts anyway, right?
Cheers.

Similar Messages

Report Title and Text Area issue when exported to pdf using Viewer

Hi there,
We are using OracleBI Discoverer Version 10.1.2.55.26
We have reports that displays Report title containing the following
- Report Title
- Runt Date and Time
- Page No
And text area which displays 'Last Page'
Following properties are set at the worksheet level using page setup
Report Title --> 'Print on every Page'
Text Area --> 'Print on last page'
The report when exported to PDF using Discoverer plus works fine and displays report title and text area as defeined.
But when we try to export the same report to pdf from Discoverer viewer, it displays
- Report title on first page only.
- text area on all pages
All our users accesses report using discoverer viewer so we cannot open discoverer plus to them.
Is there a solution which will enable us to export the report in pdf using discoverer viewer and displays the same output as discoverer plus.
Please let me know... If you have any questions then please feel free to ask.
Thanks in advance for your help...
Manish

but when opened on other os x machines some text is colored differently than it should be
Well, if typographic objects are colour managed, the colour appearance is dependent on the source ICC profile that describes the colourants in the typographic objects and the destination ICC profile that describes the colours the display is able to form and the RBC colourant combinations that will form those colours.
In general, typographic objects should have special treatment, since the expectation is not that typographic objects should be colour managed, but that typographic objects should simple be set to the maximum density of dark. On a display, that is R=0 G=0 B=0 and on a seperations device (a lithographic press) that is C=0 M=0 Y=0 K=100.
If for some reason typographic objects are colour managed, and if the ICC profiles for the displays are off by half a mile or more in relation to the actual state of the display system, then the colours will not be the same. On the other hand, if those displays are calibrated and characterized, then the colourants will be converted to form the same colours on the displays.
/hh

TITLE AND TEXT SYMBOLS disappear in report LDB

Friends,
Im changing a select-screen generated in a LDB program but when i add my select-screen cant see its titles and text elements. Need help please....

Hi Darill
You can check this information access report source code and follow steps below:
     - Se38
     - Inform report name
     - goto -> Text elements - > Selection Texts
Please, be ensure that this object is active in the system and check it there is texts or Dictionary ref flag is set.
It should solve this issue
Kind regards

Broadcast/SD Titles and Text: Workflow

I'm curious what, when doing Broadcast Titles and Text, is your workflow.
Do you exclusively make slates in Illustrator etc.? Do they look significantly better and function better for Broadcast product than making same in LIveType or Motion. Is there a big quality advantage in Vector based Titles/Text
Do you make any of your Titles/Text in LiveType or Motion.
Is there another workflow for high quality Titles/Text you would recommend?
Thanks

I've used both LiveType and Motion for titling some very large QuickTime files (1440 x 900 @ 25fps) and the quality is perfect. As high a quality as you could ask for.
I can understand the rationale for saying that Illustrator would give better results that PhotoShop (vector vs. raster), but if you're working with the native LiveType file in FCP you're still in a vector environment (at least I think so - anyone care to comment?).
It's the same argument for using vector-based files rather than pixel based ones for DTP applications that are going to be printed by a commercial printer: The printer's RIP rasterises the file just once at the correct imaging resolution.
To my mind, a vector is a vector: I can't see how Illustrator can give you 'better' vectors than LiveType or Motion - if you're using FCP to 'RIP' either of the original files to pixels, that is. Perhaps using a 3rd party rendering engine would give you better quality, in the same way that different PostScript RIPs give better quality than others.
Maybe that's the reason why some people use Illustrator - as the non-FCP RIP can't handle native LiveType/Motion files?

How do I set a default title and text style on Quick?

On Adobe Premiere Essentials 13 video editing, if I use Quick is it possible to set a default style for titles and text? I see instructions for setting a default style in Expert, but that doesn't seem to work in Quick. Thanks.

aperture14
What is this Premiere Elements Essentials 13? I know the program only as Adobe Premiere Elements 13 for Windows or Adobe Premiere Elements 13 for Mac. On what computer operating system is it running and is it a pre-installed program from the computer manufacturer?
So, if you have some modified version of Premiere Elements 13 Windows or Mac, I cannot give you a yes or no answer to
if I use Quick is it possible to set a default style for titles and text?
In Adobe Premiere Elements 13 Windows (assumed Mac also), there should be no problem in creating a text title in the Quick workspace and saving a particular text style and setting that created text style to the default. Are you OK with doing that in the Expert workspace if not the Quick workspace?
Please give us more details of your situation so that we can customize a reply for you.
Thank you.
ATR

APE4 Title and Text Animation

I am trying to animate some multi line titles. I found that the animation, Scalein, only works on a single line of text. Is this correct or am I doing something wrong. The animation worked on a singel line but not on a multi line title.
Thanks.
Cheers! Phil

For working with multiple lines of text and animation, you can create several Titles, each with one line of text. These would be stacked above any footage on higher Video Tracks (VT's). Each single line can then be animated with the same, or different Effects.
Depending on what one needs and wants, another way would be to do the Title with a block (multiple lines) of text, and then Keyframe, say Motion>Position for that Title. An example would be to have the Title begin off-screen and then "move" into the scene from the right, with Moton>Position Keyframes, hold for a period of time, then move out of the screen left, again with Motion>Position Keyframes. You will probably have to grab the right side of the Title and drag it to get the desired Duration.
Good luck,
Hunt

UITableView each cell has image, title and text

Hi, I have a UITableView and right now each cell has an image and a text. I would like to change the layout a little bit.
For each cell, on the left you have an image. On the right, the top portion has Title which is in large fonts and bottom portion has text which is in smaller fonts. Does UITableView already support it or I have to write my code to customize it?
Thanks,
ff

You need to configure a custom cell, either in code or in IB using a subclass of UITableViewCell. There are excellent, well explained examples of both techniques in Chapter 8 of Mark & LaMarche (and based on many of your questions, I think a few hours with that book would save you months of looking for free sample code). However there's also a good discussion with sample code in the +Table View Programming Guide for iPhone OS+ under Customizing Cells.

Po Mail Title and texts

Hello,
Can you please suggest if it is possible to change mail title for a amended PO as 'Purchase Order Amendment' whenever a change is done to PO and then the output message is reprocessed?Any advice would be greatly appreciated.Thanks.
Kind regards,
Pinky

Hi Pinky,
Yes it is possible.The change can be made from the process you are mailing the person.it may be work item or may be specified in any other process from where you have configured the mail.Please check the process.I am sure your query will be resolved.
Have a best day ahead.

Blurry icons and text and top bar

Hello,
I always keep my Mac Mini on (almost 3 months now), yesterday I used it and it was great, ofcourse I left it on overnight (as always) and when I tried to use it today desktop - icons - text - top bar even mouse courser became blurred almost double vision.
however bottom bar (the bar has icons) are all fine, when I shut down the Mac Mini I noticed all things goes back to normal while it is turning off, and same when it starts every thing goes fine for few seconds then it happens ,as if there is an application (virus maybe) making the display blurred.
any help will be really appreciated.
Thanks

Turn off Zoom from the Universal Access and Keyboard & Mouse panes of System Preferences.
(112453)

HT1296 I recently purchased songs from my iphone. All good... But I then went to put them on my ipod touch. They seemed to have downloaded but the songs wont play and the song title/the text, appears in a grey colour.

I recently purchased songs from my iphone. All good... But I then went to put them on my ipod touch. They seemed to have downloaded but the songs wont play and the song title/the text, appears in a grey colour and there is a downlaod symbol in front of the song title. what do i do next?? They play on my iphone and from the itunes library but not from my ipod touch.

If the songs are still on your ipod, make sure autosync is disabled in iTunes on your computer, connect and right click on it in the device list, then choose "transfer purchases" to copy all bought media and apps from your ipod to your computer.
If the songs are not on your computer and got deleted from your ipod as well, you can't get them back, unless you have a backup of your iTunes library as part of your computer backup.

How can I add a title and ALT text to a JPEG image in Elements 11 for MAC?

Does anyone know if there is an easy way I can add a title and ALT text to a JPEG image in Elements 11 for MAC?
Very grateful for any help here.

Hello
The Arrange menu is your friend.
You may select the arrow then "Bring to Front".
Yvan KOENIG (from FRANCE vendredi 19 septembre 2008 17:49:50)

Why do my photos and text disinigrate quality (appear fuzzy / blurry / lo res) in premier pro cs6?

Premier Pro CS6 Question.....
Why do my photos and text disinigrate quality when imported to premier pro cs6?
I have still shots that have text and they look clean and crisp when I view them in photoshop. Why does the photo and text look so fuzzy or blurry and not crisp when I import the still files into premier pro cs6?
Is there a setting in premier that I am setting incorrectly? That is possibly blurring my photos and text? The problem appears in both my PR file and my final exported work.
Is there a way to retain the quality of the image and text that I see in my photoshop file?
Note: I am not enlarging anything after import, I am reducing though, but I would think this would only make images and text sharper????
Any help would be greatly appreciated, Im getting tired of doing all my work and delivering blurry / fuzzy / what appears to be low resolution images and text when I complete my project.
Thanks in advance for any help offered.

Hi Jim, thanks so much again for chiming in to my questions.
Specs of Stills - Photoshop file - 677 x 1014px, 150dpi, 1.96M file size, 150dpi, this is the size of the file I originally imported and reduced to approx. 65%, the one sized properly in photoshop imported fuzzier.
Sequence Settings -
Export Settings, FLV, attached are settings.
1. EXPORT FILTER SETTINGS...
2. EXPORT FORMAT SETTINGS
3. EXPORT VIDEO SETTINGS
FINAL PROJECT IS DELIVERY OF FLV FILE TO EMBED IN INTERACTIVE FILE. Ive tried different settings for different jobs, just feel all text and photos fall apart when pulled into and exported to FLV for embedding final.
Ive done several slideshow and video's in premier pro, have so much to learn still, Im thinking I keep diving into my projects and possibly making a total mess out of my settings for the desired final destination? is this possible?

Titles- quick text display and long black spot

I am adding titles with text over black. I can't lengthen the time the title text stays in view without lengthening the total title time so that there's a long black space at the end. I don't see anything in the help section to address this. I'm working in "converge to center" effects.
Suggestions? I've done a dozen or so iMovies and love the tool---but for slower readers, this is a problem.
Thanks

Hi David - I assume you have the problem that your chosen title style allows only 2 lines before repeating the convergence with the next two lines, and the pauses are not long enough for your purpose.
The solution is to extend the length of the pause - but this has to be done with a work-around. You can do it by creating a still-frame of the paused part of the title, but the quality is not quite as good as the original.
There is a better way. This is what I did with your particular title style to extend the pause.
1. Drag the title clip to the desktop. this creates a .dv QuickTime file.
2. Open this file in Quicktime, move the playhead to the paused text, and go Edit>Trim to Selection.
3. Go Command>C (Copy) and then Command V (Paste) and continue to hold down those two keys until a suitable duration has been created - maybe 5 seconds.
4. Save As a self-contained movie, and drag that file back into the iMovie project, and place it in the appropriate position. [You will need to split the original clip at the pause in order to position it].
This has created a 5 second-long clip of the paused text which should be almost indistinguishable in quality from the original. Repeat the process for other pauses where needed.
It is much faster to do than to explain!!
Message was edited by: catspaw

Can I Enlarge Title and Artist Text when Playing Music?

Hello. This question pertains to the 5th generation 32 GB iPod Touch.
When playing music, I'd like to know if I can enlarge the text that displays the title and artist of the track now playing.
(I listen to my iPod in bed, but I wear contacts, and take them out at night. I am unable to read the text clearly.)
If there is a way to enlarge the text, what is the procedure? Is a separate app required, or can I do it some other way?
Thank you! Jd

After doing more research and playing with the iPod, I figured out what to do. There's a trick to it.
You double-tap the screen with three fingers. On the second tap, you spread your three fingers out. That enlarges the screen to almost any size you want. Then, you use your three fingers to move the screen around. The Zoom feature will memorize the customization, and will remain that size unless or until you change it.
It's just a little bit tricky, but that's how I got it to do what I want. Jd

When i import my AutoCad PDF into photoshop my lines and text become blurry. How do i fix this

When i import my AutoCad PDF into photoshop my lines and text become blurry. How do i fix this?
Is it resizing as I import it or maybe a printer thing?

It is rasterizing the PDF at the resolution you tell it to, unless it's an image only PDF - then the image will be opened as-is.

Blurry Titles and text on HD 6.0!!!

Similar Messages

Maybe you are looking for