Blutooth alcatel one touch star

Hi mates ! I just got a new Ipad mini IOS 7.0.4 and can't connect my Alcatel One Touch Star with it ! Anyone can help ? Thanks in advance

nem tudok videot nézni a telefonon hogyan lehet inditani vagy az avit lejátsza

Similar Messages

HT4145 How can I use an Airport Extreme to act as a Range Extender for an Alcatel One Touch Y800Z WiFi modem/router? I get a message saying it cannot be extended. Thank you. Arup

How can I use an Airport Extreme to act as a Range Extender for an Alcatel One Touch Y800Z WiFi modem/router? As we live in a rural area and our landline broadband speeds are awful, I have moved on to a 3G provider in the UK (EE/Orange) and set up the wireless modem which is working very well with an iMac. I have an Airport Extreme base station which was previously connected with an Ethernet cable to the landline router, and two Airport Express stations as Range Extenders. I would now like to use the Airport Extreme and the two Express stations to extend the range of the Alcatel WiFi device. I have tried automatic and manual set up with the Airport Utility but at the crucial step for selecting a network to extend, although the WiFi device is recognised, I get a message saying it cannot be extended.
Thank you for any help you can provide.
Arup

This is a problem with a lot of cheap end wifi hotspot like devices.. sometimes you can just swap the sim out to a real 3G wireless router.. that is a better approach IMHO than wireless repeater ever will be.
In the meantime..
Have a go with the suggestion.. place the express as wireless bridge. With a computer connected to the wifi from alcatel unit.. (I am amazed Alcatel still are in domestic market.. I thought they sold out). Set the express to join the wifi.. you do this in the airport utility.. old one is easy.. but in v6 you have to trust to luck so to speak and hope the auto setup works.. tell us if you have trouble.
With the Express bridging.. you can then plug it by ethernet into the TC.. which will be in router bridge..
ie
You can then run the connection from wireless or ethernet on the TC.. and it will relay back to the alcatel for internet.. all a bit dodgy but who knows.. it may give you what you need.
Wireless repeater is never particularly reliable in my experience. I would avoid it if possible.

Cannot build B2G (BRANCH=v2.0) for alcatel one touch fire. pull failed

I'm trying to build B2G for alcatel one touch fire. after cloning B2G I ran BRANCH=v2.0 ./config.sh hamachi and then on running ./build.sh I get the following:
Pulling "libOmxWmaDec.so"
cp: cannot stat ‘../../../backup-hamachi/system/lib/libOmxWmaDec.so’: No such file or directory
Failed to pull libOmxWmvDec.so. Giving up.
> Build failed! <
Build with |./build.sh -j1| for better messages
If all else fails, use |rm -rf objdir-gecko| to clobber gecko and |rm -rf out| to clobber everything else.

Hi vigneshp,
The SUMO forums are aimed at end-user issues and questions about the usage of Firefox OS.
For developer-related questions, you will find better resources on the MDN page, mailing lists, and StackOverflow:
* [https://developer.mozilla.org/en-US/Firefox_OS/Building]
* [http://lists.mozilla.org/]
* [http://stackoverflow.com/questions/tagged/firefox-os]
I hope you find this information useful. Please let us know if you have any other questions about your Firefox OS device.
Thanks,
- Ralph

Need to Add Alcatel one Touch X520 USB Modem to Supportlist on RV215W

Hey Guys,
i need my Alcatel one touch X520 USB Modem to the supportet devices on the Cisco RV2150W Router.
My Location is Germany
and ISP is German T-Mobile / German Telekom
I also attached the Driver/Software wich is on the Stick.
Best Regards,
Kevin

Dear Kevin,
Thank you for reaching the Small Business Support Community.
As per the below USB compatibility list; I see no Alcatel USB modem is currently supported for T-Mobile Germany on RV215 routers;
https://supportforums.cisco.com/message/3852720#3852720
I therefore suggest you to contact the available support channel in your country to open up a service request to add your modem to the supported list;
https://supportforums.cisco.com/community/netpro/small-business/sbcountrysupport
Please do not hesitate to reach me back if there is any further assistance I may help you with.
Kind regards,
Jeffrey Rodriguez S. .:|:.:|:.
Cisco Customer Support Engineer
*Please rate the Post so other will know when an answer has been found.

Will support for 'ALCATEL one touch' with Forefox OS be continued ?

I've got an ALCATEL one touch with Forefox OS ver. 1.30.
My Question: Will this smartphone further be supported by Firefox OS?
Even there are already higher Firefox OS versions available for other devices,
nothing has changed so far for my device :-(
best regards
Tensor

hello Tensor, there are different firefox os devices in the "alcatel onetouch" range (fire, fire c, fire e) - which one are you referring to?

Why my Alcatel ONE TOUCH FIRE cannot access Marketplace?

I tapped the Marketplace App. However, I could not access the Marketplace.

Hello,
Thank you for contacting Mozilla Support! After reviewing the information that you provided, we think that the best way to fix this issue would be to reset your device.
'''Warning:''' Resetting your phone will delete all data stored on the device, including apps, calendar data, email accounts, and settings.
To reset the device, follow these instructions:
# Open the Settings application.
# Tap on the Device Information button.
# Tap on the More Information button.
# Tap on the Reset phone button.
# Tap OK to continue or Cancel to cancel.
We hope that this fixed the issue you were having. Please report back to us if this helped!
Thank you!

AEBSn + Alcatel Speed Touch Home ADSL modem

I just bought one of the new Airport Express 802.11n base stations, and I can't get it to connect to the internet through an Alcatel Speed Touch Home ADSL modem. This modem works flawlessly with my Airport Express router (and with previous routers) using PPPoE.
I've configured the new AEBSn exactly in the same way, I can access it wirelessly, but it seems to hang during the PPPoE negotiation - it shows "Connected" for a few seconds, but I've never been able to even ping any addresses outside my network. I'm stumped - has anyone been able to get this combo working?
Thanks!
MacBook Pro, Mac Mini Mac OS X (10.4.9)

Do you have DHCP Enabled on your ADSL modem ? Does it act like a router also ? If Yes, what is the default IP Address of your ADSL Modem ?

One touch Recovery feature not working

THe one touch recovery key feature is not working in my laptop. Initially I used to shut down my system and press the key. It was working well. If I press the key the system gets booted normally and it doesn't goes to the recovery panel. Kindly help me in trouble shooting it
Thanks in Advance

hey rajeshmurali,
i suggest uninstalling the software, then go to >>http://consumersupport.lenovo.com/us/en/DriversDownloads/drivers.html
download the latest version of the software and reinstall.
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

G460 became very slow after installing windows 7...help with one touch recovery??

hi ...i got a laptop from friend 9 months ago from us ....its g460 with windows 7 home premium os...for practising sharepoint tech: i installed windows 7 ultimate 1 month back and after that i tried to install .net and sharepoint s/w with no use...after that whenever i start its taking neary 15 mins to start itself and then its saying windows s7 is not genuine...si i called up service center and they said that s/w instllation they dont cover under warranty ..and they are charging around sme 2000 bucks to install windows 7 premium and said that we will also provide one touch recovery...
cant i with online support do the one touch recovery and get back the laptop in the previous state?? what is this one touch recovery all about?? is it only for data ?? thanks in advance.

hey durgamavu,
Do check the following >>
http://consumersupport.lenovo.com/%28S%28wjgnfm55be4kejqew1t0nj55%29%29/lk/en/HintsandTips/hints_sho...
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

One-touch keys

I have a pavilion dv6t-3100 select edition laptop and i want to change the one-touch media application key to open windows media center but i can not figure out to change the settings. Is there any way to do this?

Re: Registry Entries, lQQk here for related suggestions:
(G62-320CA solution)
http://h30434.www3.hp.com/t5/Notebook-Hardware/How-do-I-customize-the-Action-Keys/m-p/379207#M36213
and (CQ62-215DX registry notes)
http://h30434.www3.hp.com/t5/Other-Notebook-PC-questions/How-do-I-remap-hotkeys-on-Compaq-CQ62-215DX...
and (top level thread for CQ52)
http://h30434.www3.hp.com/t5/Other-Notebook-PC-Questions/reassign-or-disable-app-keys-on-CQ62/m-p/75...
This probably won't help you (a year too late) but it may help someone else
Larry
Please click the White Kudos star to say thanks for helping.
Please mark Accept As Solution if my help has solved your problem.

I cannot sych my ipad nor ipod . When I plug in either using the usb cord they do not show up in itunes. I have synched both of these before on this computer. i am running windows 8 on a dell one touch computer.

When I plug in my iPAD or iPod to my Dell one touch computer using windows 8 to synch them they do not show up.
I have synched them both recently on this computer with no problems. I have restarted everything ( computer , ipad , ipod ) multiple times
and used different usb cords and ports but nothiing works.

Hello abaneki,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Have a nice day,
Mario

Is there a "one-touch" way to convert to my existing library to DNG?

Is there a "one-touch" way to convert to DNG?
My Aperture library currently has three types of files: JPEG files taken with point-and-shoot camera going back for years, (ii) RAW (NEF) files made with a Nikon D60, (iii) RAW (CR2) files made with a Canon G9, and (iv) RAW (DNG) files I have shot recently.
I am interested in converting all the non-DNG RAW files (NEFs and CR2s) into the Adobe DNG file format. I understand that the format has a smaller file size (than the original RAW file) and that it is "lossless" (unlike converting to JPEG). So, in addition to "standardizing" my file-types, it will also reduce my overall library size (in GBs).
So, the question is: is there a way to take my existing Aperture library and, through some (hopefully free) combination of scripts and programs, convert all the RAW files to DNG automatically and without having to export each one from Aperture and them import it again. That is, I want a solution that will look at each file and ignore the JPEGs and DNGs, (ii) convert the NEFs and CR2s into DNG, and (iii) move the original NEF/CR2 files to a folder (just in case)?
This is not an problem going forward, because I can easily just import as DNG to begin with ... but its an issue for a few thousand images in my library.
Any ideas? Also, anyone think this is a crazy bad idea?
Thanks,
~B

Do you find that using Aperture to "import" the pictures (e.g., using the import function on Aperture and pointing it at your memory card) gives better results than using the DNG converter to "import" (e.g., by selecting the camera memory card and saving the conversions to disk, then importing those DNG files into Aperture)?
Not the way it works. The camera memory card does not have conversions on it, it has RAW (or JPEG) image files.
IMO generally most useful to help keep drives underfilled and fast (drives slow as they fill) is to manage by Reference ("referenced images") as in the workflow outline below where Master images can live anywhere. However with small changes similar workflow could be applied to Managed Masters.
I feel pretty strongly that card-to-Aperture or even camera-to-Aperture handling of original images puts originals at unnecessary risk. I suggest this workflow, first using the Finder (not Aperture) to copy images from CF card to computer hard drive:
• Remove the CF card from the camera and insert it into a CF card reader. Faster readers and faster cards are preferable, and Firewire is much preferable to USB2.
• Finder-copy images from CF to a labeled folder on the intended permanent Masters location hard drive.
• Eject CF.
• Burn backup hard drive or DVD copies of the original images (optional recommended backup step).
• Eject backup hard drive(s) or DVDs.
• From within Aperture, import images from the hard drive folder into Aperture selecting "Store files in their current location." This is called "referenced images." During import is the best time to also add keywords, but that is another discussion.
• Review pix for completeness (e.g. a 500-pic shoot has 500 valid images showing).
• Reformat CF in camera, and archive originals off site on hard drives and/or on DVDs.
Note that the "eject" steps above are important in order to avoid mistakenly working on removable media.
Alternatively, does anyone actually use (or recommend) Nikon-branded software for any step in this process? If your camera shoots JPG (as all mine did till a few months ago), it does not matter ... but does the RAW thing change that equasion?
Yes RAW changes the equation. Folks who want the very best NEF conversions will use Nikon Capture NX2 but the interface *****. Personally I find Aperture very good for the D2x.
Good luck!
-Allen Wicks

My HP Pavilion 23 touchsmart all in one touch screen is not working

My HP Pavilion 23 touchsmart all in one touch screen is not workin. I have restored the system. I didn't see any place in the pen and touch to disable or enable and not sure if i should instill drivers. What can i do?

Hello @junk4are,
I understand that you are having issues with your HP Pavilion 23 Touchsmart Desktop PC's touchscreen and are wondering if you should install your drivers. I would certainly recommend that you do so. I would be happy to assist you, but first I would encourage you to post your product number for your computer as there are various versions of the HP Pavilion 23. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number I can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Powerbook 15" w/ Tiger won't read Maxtor One Touch II External Hard Drive

Hi all:
For some reason my G4 Powerbook can't recognize my Maxtor One Touch II external hard drive. I am trying to find a firewire cable that fits, as the Maxtor just gave me a USB and says that the cable won't work with mac. I am trying to find a cable that has a "printer type" end and a firewire end. Will it help? Where do I find it?
Thanks,
Chris

No the printer type end, won't work in Mac OS X either. The software that is included with One Touch does not work well on Tiger or later. Instead I recommend not using that software, and instead using Shirt Pocket Superduper for backup. Or look for EMC/Dantz to update the drivers for the included software to Tiger. I think the One Touch does have a Firewire 6 pin connector which is Mac compatible. These ports look like the Firewire port on your G4 Powerbook. Port number 2 below is a Firewire port:
You can buy the cable from the Apple Store, or any major Mac mail order shop such as Macwarehouse, Maczone, Macconnection, or even CDW.

External USB Maxtor One-Touch 3 suddenly fails to mount on MacBook Pro:

External USB HD suddenly fails to mount on MacBook Pro:
My One Touch III 600GB drive, external power supply, suddenly will not mount and is not recognized by the system profiler or Disk Utility, however, drive, connected USB, appears under windows XP.
1. Power cable and usb cable working.
2. Using external AC adapter(not relying on USB power).
3. Other USB devices, mice, flash drives work on both USB ports.
4. Drive works on Windows, folders and data integrity ok.
5. Drive format is NTFS.
6. No Maxtor software installed.
7. No humming or strange noises emanating from drive.
8. No problem to January 14, 2008,
9. Mac OS 10.4.10 updates last downloaded and installed Jan 20, 2008.
10.1 blip of the light on "The One Touch Button", then light turns solid white.
Questions:
1. Does Apple set sleep or lock switch for devices (drives)?
2. If so, can it be reset manually?
3. Does Apple have configuration profile for devices, like a registry key?
4. If so, where is it located?
Configuration:
Dual 2 GHz MacBook Pro 15”
2 GB DDR SDRAM
OSX 10.4.10
2 USB Ports Left and Right

NOTE: This Update is required when using a OneTouch Drive as a bootable device. Seagate suggests that you dismount and disconnect your FireWire Drive before continuing.
Users have identified issues when connecting OneTouch External Drives to FireWire Ports on their Mac G4 and/or G5 computers. These Problems range from system hangs, kernel panics to slow data transfer rates. The cause of these problems has been traced back to the FireWire Driver. Seagate has resolved these problems through updated FireWire Drivers.
I am using USB and not trying to use drive as a boot device.

Blutooth alcatel one touch star

Similar Messages

Maybe you are looking for