Blutooth Problem with car stereo and iPhone5

Got new iPhone 5 yesterday and paired it with car stereo for handsfree use. When I make a call I can use radio answer button and the speakers.  When I receive a call I can only use handset. iPhone 4 worked fine so I doubt it is the car. I deleted and repaired the phone yet still the same issue. Help?

    Hey nippers1!
It does sound like we have a conflict with your device and your car Bluetooth. Thanks for doing that great troubleshooting! I would like to ask, have you checked with your car manufacture to see if the phone was compatible with your car's Bluetooth? Sometimes different devices that have different Bluetooth profiles will work differently. Can other iPhone 5s connect at all? Can your iPhone 5 connect and use other Bluetooths fully? Also, are you having any problems with making and receiving calls in general? Also, is your device up to date? Please make sure it is on the most current software. Please report back!
MichelleG_VZW
Please follow us on Twitter @vzwsupport

Similar Messages

  • Iphone bluetooth problem with car stereo

    I bought a third party bluetooth adapter for my car stereo. Hooking it up with any other device ( other mp3 players, my husband's windows phone ) all work and stream music. Pairing it with my iphone 5 causes constant crackling and static like blown speakers. Same with the ipod touch. Is there a setting in the phone that will fix this?
    Thanks

    I had same issue on iPhone 4 using "ebay" type adapter but improved it
    with  Blackberry bluetooth receiver
    I however now have iPhone 5 wired in for perfect results

  • After upgrade to ios 6 usb connection problems with car stereo

    Hi Everyone,
    after ios upgrade to ios6 i am not further able to use the iPhone 4s as music device - having usb connection problems ("not readable"). I am sure, that the upgrade ist the culprit; worked fine before. My car stereo is built in a Volvo XC 60; the device is connected via the standard usb cable by apple.
    Any Ideas?
    Thanks
    Ivo

    (same problem thread): see also https://discussions.apple.com/message/20185146#20185146 (not fixed)

  • FIle check problem with car stereo

    Have a IPod photo, using an iPod compatible JVC stereo in the car, with Ipod adapter.
    Was working fine for a couple of weeks, but now just keeps saying file check. Used to file check for a few seconds and then the Ipod could be accessed through the deck. Now file check just keeps flashing.
    The Ipod itself says "ready to disconnect", with the menu flashing up every few seconds for a split second, as if it is about to connect (but then it doesn't do so).
    Help!?!

    I had same issue on iPhone 4 using "ebay" type adapter but improved it
    with  Blackberry bluetooth receiver
    I however now have iPhone 5 wired in for perfect results

  • Help! Nano problem with car stereo transmitters

    We've bought 2 different FM transmitters from Best Buy - were told either would work with the Nano. Both did work with the Mini, but we get total silence when we connect the Nano. Took one back - still have the Griffin model. Anyone else having this problem?

    There's a problem some here have reported (and I've experienced once) in which the nano won't output sound through the dock connector without a reset.
    From the support site:
    "Reset your iPod by toggling the Hold switch on and off (set it to Hold, and then turn it off again). Then press and hold the Center and Menu buttons for at least 6 seconds, until the Apple logo appears."
    Give that a try and if it doesn't work, it may need to be replaced. Note that only the FM transmitters that work with the dock connector will probably work with the Nano. I know the Monster ICarPlay does work, as I use it with my nano frequently.
    -- Mark

  • IPod Touch 3G w/ stopped working with car stereo/docking speakers

    After I upgraded to OS 4, my iPod Touch 3g stopped working through the USB port of my car stereo (just says "reading" and never progresses from there). It also stopped working through the docking station (basically a large clock radio) that I bought for my living room -- it will recharge and play music through the speakers but the docking station and its remote can no longer control the music (can't advance to the next song or anything else), so I have to physically change things on the ipod itself.
    I was told by Crutchfield (where I'd purchased the car stereo) that this was a known problem with Apple -- that with OS4, many of the devices that previous worked with iPods no longer worked, and that this would be resolved in a later version of the OS that would provide some backward compatibility. However, I can't find anything at all about this.
    If anyone knows more information about this, or has a link to where I might be able to read more, I'd appreciate the info. I selected and installed both the (almost new!!) car stereo and docking station specifically because they allowed me to connect and control my iPod, and now I've lost that functionality and the $$ I put into those devices (over $300 total)!

    I apologize for posting a bit early.  Found an Alpine manual online and i needed to set the AUX port to off.  They also recommended a reset of the Touch.  After doing these two things it is now working.  Maybe this will help someone else.

  • Ios 5.0.1 + Iphone 4 bluetooth connection issue with car stereo

    My Iphone 4 will not connect with my new JVC car stereo I have spoken to JVC customer support and they say its an Apple issue that they need to fix (changed something with the bluetooth connection scripts in the latest update update, as they have done before).
    The phone finds the stereo and then tries to pair with it, however half way through the pairing process the phone losses connection with the stereo and the pairing is then deleted.
    I have deleted all the existing pairing in the phone memory and ensured that the stereo has been rebooted to ensure no conflict of previous installs would effect the process
    Does anyone know if Apple are going to fix this glitch in a new softwre update (and if so when is it being released) as at the minute i have an expensive stereo which is cant use to its full ability?

    Similar problems occured when Apple released iOS 4 last year. It was NOT fixed with an update from Apple. It was fixed by the system vendors and automakers releasing updates for their equipment. There are ongoing complaints from people with some Toyota built cars (Toyota and Lexus) with some systems as well as some BMW drivers.
    I'm willing to bet money that the head unit you have is not fully standards compliant. Unfortunately, getting JVC to admit that is going to be nearly impossible. I suspect they will just quietly issue an update sometime in the next few months. Assuming the head unit can be updated by the end user at all.  You may have to resort to an inexpensive visor mount speaker phone in the mean-time.

  • IPod no longer works with car stereo since upgraded MBA & iTunes

    My iPod classic has worked just fine connected to my car stereo since i bought it last june. I just bought a new Macbook Air (OS 10.7.3) & installed ITUNES 10.6.1. After I synched my ipod for the first time its recognised by the car but i get a "can't read data" message. I re-formatted my ipod but its exactly the same. Do you think its the upgrade- or the cable? Has anyone else found a bug with this version of Itunes or the OS? I have my doubts a cable would make the difference, and my old ipod nano that i haven't synched for a while works fine.

    If standalone works fine, then, most likely the 30 pin connect may have some dirt or lint, prevent data transfer.
    You can try to blow it clean, if you have a can of compressed air or gas.
    Alternatively you can connect it to the car stereo and do the RESET, while connnected.as follows
    Toggle the Hold switch, make sure you dont see the red mark when you do the  next step
    Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
    Then release the buttons
    Select your preferred language.
    Here is the Apple support Article on the 5Rs
    http://www.apple.com/support/ipod/five_rs/classic/
    The Reset sequence may send a signal to the Car stereo to do the right thing

  • Problems with Customer Service AND unexplained charges!

    I've been with Verizon for I-don't-know-how-many years, and through the years you are bound to have a few problems here and there but some of the problems are just ridiculous! It's also the same reocurring problem!!!!!!!!!!!!!!!! I was with Alltel first, before it was bought out by Verizon. The years I was with Alltel, I didn't have near as many problems. It seems EVERY time I do the smallest change or something to my phone or bill, I get a ridiculous amount of charges that I was NOT aware of, nor told about... EVEN IF I ask "So this isn't going to change my bill, or there will not be any unexpected/unexplained charges that I don't know about?"... BUT not matter how many times I ask... and NO matter how many times I am told "no"... there always is. For example.... last year, I updated and signed a new 2 year contract and purchased the first Driod. Before, my 30 day warranty was up, I was having problems with my Driod, and decided to send it in and get a new one. Before I did this.. I called customer service to make sure there would be no interuption in my bill, and there wouldn't be any unexpect charges, and there would be no difference in anything. I was told there was not, and once I recieved my new phone, just send it in and nothing would be changed. Of course, when I get my bill.. I see I was charged $500 for the new phone. It was explained to me that my credit card was reimbursed (which I never check that card, because I never used it expect to purchase the phone) and that I was recharged for the new phone, since it was a new phone. So I had to fork out the $500 (on top of my bill) and then wait months to get the $100 rebate card. Months after that, I "assumed liablity of my line" because I was on a plan with my family. I decided to have my own line, so I "assumed liability." I was not told that when I did that, I "renewed" my contract date. So I just added 6 more months to my 2 year contract. Was NOT told about that! Then again...... I was recently having problems with my Driod (the screen went black and would not come back on.) I had to turn on an OLD motorola razor, so I would not be without a phone for two days while I was waiting on my phone to come in. As soon as my phone came in, I had my Droid turned back on. I recieved my bill recently, and my bill was $200 over what it normally should be.... so I called in... apparently, when I had my phone replaced, they dropped off my data package and when I recieved my replacement driod, they never put it back on. So I was being charged for alllll my data usage... again I was NOT told about this. I wasn't even aware that they had dropped off my data package, and when/where did they get the authority to do that??? These are just a FEW of the problems that I have had.................................
    Does anyone have these reoccuring problems!?

    I understand that my bill can be viewed online, and I do view it fairly regularly, so if there are any unexplained charges, I can call Verizon asap. The problem does not come from me not understanding my bill, but from customer service. I have been with Verizon for a very long time, and it is a continuing problem. Where did Verizon get the 'OK' to drop my data package off my plan? Who authorized that?
    After calling Verizon and trying to find out the problem, the gentleman told me that when I activated on old phone while I was waiting on my new Droid to arrive, my data package was dropped off and I "should" have been told about that. When I reactiviated my new Droid, I "should" have called and had them restart my data package. I was not aware that when you activate an old phone that data plan is taken off your plan. In all my years of having cell phones, I never make two years with one phone. I have always, at one point, had to turn on an old phone, and my data package has NEVER changed. Why would I have my data package dropped and why would I have to call Verizon to have it restarted. I would never know to do that unless I was TOLD that my data packaged HAD to be re-added when I recieved my new phone, but I was never told of that.
    All of that is beside the point, the point is, Verizon was never given the authorization to change my plan. Never. My bill was taken care of and readjusted, and I am thankful for that. It does not change the fact it is always a hassle with Verizon Customer Service and I am always the one having to PROVE that I am not at fault, or that I was NEVER told of certian things. EVERY TIME I HAVE CALLED CUSTOMER SERVICE, I AM TOLD "I'M SORRY, THEY SHOULD HAVE TOLD YOU THAT."
    "they should" does not help my bill with the extra armount of charges.

  • Problems with dropped calls and no reception on Samsung Continuum

    My mother and I both purchased a Samsung Continuum in late March 2011, and have experienced the same problems with the phone.  The device drops at least 2-3 calls per day, often on the same conversation; we have not found that location or time of day makes a difference.  The phone freezes up frequently, even if no apps are running in the background.  We lose our 3G network reception frequently, and cannot access our texts, emails, or the internet.  The screen saver kicks in even when we are actively dialing a number, or typing in a text message.  The overall performance of the phone is also poor, and it is quite slow much of the time.
    We have raised this issue several times with a representative at one of the Verizon stores, but he states that he can find no problem with the phone, and that these issues may not be covered under our insurance plan.  None of my friends with non-Samsung phones are having the same problems with phone reception and performance.  I am aggravated enough with these issues that I am considering reactivating my old Blackberry, which worked like a charm.
    I am not upset that my phone has not been updated to Android 2.2.  I just want the phone to perform as stated, and not fail at its primary function:  making and receiving phone calls.  I am not certain if these problems originate with the phone, Verizon, or Samsung, nor do I care.  I just want to resolve these issues as soon as possible, or I will have to look at other alternatives.
    Thank you.

    If this doesn't work...now what??? I have a useless $400 plus piece of unreliable junk. My Motorola Razor was ions more reliable than this phone...very, very sad but true.
    What carrier were you using with the Razor? AT&T? Same area?
    Dave M.
    MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
    Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch)

  • Anyone NOT having problems with ITunes 8 and latest firmware update???

    I have really been put off updating to ITunes 8. The firmware update appears to be doing well. Is there anyone that uses a MacBook like myself who have had absolutely NO problems with new Itunes and firmware update? Answers on the back of a £50 note....

    Not having issues now that I have updated all i(hardware) firmware to version 2.1, two phones and an iPod Touch, all work fine (So Far) (knocking on wood). As far as iTunes goes I have mixed feelings. It's a bit faster and more stable, however they removed the "Burn CD" ability from the software. That blows a bit as I would make CD's from some of my play lists to play in the car. Yes I can dock my devices in the car, but as a matter of convenience it's easier to fire up the CD when your in a rush.

  • IPhone 5 Bluetooth Audio Problem w/ Car Stereo (Pioneer AVH-P3300BT)

    I tried looking around to see if anyone else had this issue, and didn't find an answer.
    I have a Pioneer AVH-P3300BT car stereo, and while it doesn't play music via bluetooth, it does have a very nice setup for talking on the phone.
    It's always worked fine with my iPhone 4, 4S, and also several Android handsets. It even worked fine on my 4S after upgrading to iOS 6. But now I have an iPhone 5, and the audio quality is just horrendous. I can kind of hear the person on the other end, but according to whoever I'm talking to, my voice sounds garbled and "demonic". The iPhone 5 on iOS 6 is the only device this happens with. Is there a fix for this, or is it at least a known bug? I would hate for my expensive car audio setup to be rendered useless for the purpose I bought it.
    The deck also displays other information from the connected phone, such as signal strength and battery level. When the iPhone 5 is connected, it shows a dead battery (even when full) and a completely full signal (which is almost never really true).
    I can use the phone with my Plantronics bluetooth headset and there are no sound quality issues there.

    Same here. Why doesn't anyone from support offer a Solution or at least reply????
    This issue has nothing to do with your brand of audiosystem. I talked to quite a few iPhone 5-ers and they ALL have the same issue.
    @Apple solve this!!!! And reply!!

  • Problem with IOS8 update and my 2013 Honda Accord

    Updated my iPod touch with IOS8 and now it acts weird while connected to the stereo of my 2013 Honda Accord with a USB cable.  When I start the car and set the stereo to iPod, it will grab a random song from the iTunes Library and start playing it.  I can manually change the music on the iPod but the stereo display still shows the random song title and none of the stereo controls (including those on the steering wheel) will control the iPod.  The random song title will stay on the stereo for a  random length of time.  I will be changing the music selection from the iPod and all of a sudden the stereo display will show the correct song and the radio controls will work.  Something is missing here regarding the communication between the car stereo and the iPod.  Anyone hear of a Honda software update to work out the bugs?

    Contact Honda. Sometimes an IOS update breaks compatibility
    Also sometimes this helps:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync/delete all music and resync
    To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       

  • Can you help with technical problems with the stereo imagry option

    can you help with a technical problem with the stereo imagery option ? it won't take out lead vocal in a stereo mp3'

    Because this forum software is so absolutely USELESS now, you don't get to see the whole of the question in this view. In the other (non-list) view it says:
    "can you help with a technical problem with the stereo imagery option ? it won't take out lead vocal in a stereo mp3"
    And the answer is that if you can't isolate the vocal in the stereo field, or it is one of these odd ones where it's used inverted polarity in different parts of the stereo signal for the same vocal, then you won't be able to. But without a sample, it's impossible to tell. If you can post a link to one, that might help. It has to be external to this site though - Adobe in their infinite wisdom don't allow the posting of audio files on their audio U2U forum. Helpful, that, isn't it?

  • Pairing with problems with car radio system

    Hi
    I have a Blackberry 8700 which I need to pair with the Radio in a Land Rover Freelander 2 (same for Jaguar, Volvo and some other Ford based Radios). It would not connect at all and I was advised to download an applet from Blackberry and it does now connect but I don't get the phone numbers/ contacts/ call logs to transfer. The O/S version is 4.2.1.94. Does anyone know how to get full functionality. Frustratingly it fully connects with my portable Garmin Sat Nav. I know car radios are not always the most flexible things but it is really frustrating as otherwise the hands free calls are fine.
    Hope someone can help
    Grumpy

    I also have the same problem with an 8900 and Land Rover Freelander.
    Is this a bug with the Blackberry OS?
    Can someone help?
    Also Gumpy.....

Maybe you are looking for

  • Mail crashes on opening in OS 10.9.4

    Mail is currently unusable. Every time I open it it cashes with the error message below. I've installed the 10.9.4 combo update but that didn't work. It does the same thing in safe mode. Any ideas anyone? Process:         Mail [814] Path:           

  • ITunes 8 and Windows Vista "sound effect"

    So ever since iTunes 8 came out, I get that stupid annoying sound effect whenever doing anything in iTunes. I can turn off the sidebar and it will stop for the most part, but I still get it when going to the iTunes Store or going to my iPod list. I w

  • Genetare the back ground jobs of the program from the SM36 tcode

    Hi All,     Consider the following points: -- My main program will schedule the jobs using the CALL TRANSACTION method -- Now i want to create a Variant for the Main program and generate the back ground job using the SM36 Tcode -- Finally it has all

  • Exchange Rate derived from OB08 while making payments

    Dear Team, We have posted a document with exchange rate 1Euro = 70 Inr manually, but when i post a payment transaction for the same in INR the exchange rate for the same line item is derived based on the rate maintained in OB08 for EURX Exchange Rate

  • InDesign CS4 Hyperlinks palette is blank

    I want to add hyperlinks to an InDesign CS4 document. I selected some text, opened the hyperlinks palette, and ... there are no UI elements showing on the palette. It's just completly empty or blank. Yet the instructions tell me to click on the link