BLuuuury DVD. Bummed - would love help!
I have a slide/show interlaced with some video clips.
I have Mac OS X 10.8.5
3.4 Ghz, 32 GB ram
Profject settings : HD1080i, 29.97 frames per second
Fileds, upper filed first
Capture Fomat HDV
Video Render : Maximum bit dpth and Oprimize stills checked
Image sizes in project: 3264 x 4928, Filke size 8.5mb
Movies are .mov, 720 x 480, 29.97 frame rate
Overall project is about 5 minutes long
I read through some posts, and just totally confused and bummed right now. My movie seems to play fine on the MAC until I burn it, with others, on a DVD. (I create seperate movies and then combine into a DVD with chapters). Each movie is about 1.2 gB , but when they are all added to one project and set to burn, it says it only needs 1.5GB of space (1/4 of whats expected)
Is ther anything I can do to not make my DVD look like a 5th grade project. My pictures alone are so crsip and beautiful, and just get trashed with the DVD creation.
Thanks so much!
Chuck
Chuck
I just deleted what I had written previously in this particular space. I had a misread on what you did (SD) and what you plan to do (HD).
The suggested workflow is going to change in view of the different source, the .m2ts files. Are these 1920 x 1080 interlaced or progressive @ 29.97 frames per second?
If 1920 x 1080 @ 29.97 interlaced frames per second, then the project preset should be set for
NTSC
AVCHD
Full HD1080i30
If 1920 x 1080 @ 29.97 progressive frames per second, then the project preset should be set for
NTSC
DSLR
1080p
DSLR 1080p30 @ 29.97
When you go to resize your photos, resize them to 1920 x 1080 16:9.
Publish+Share/Disc/DVD disc with preset = NTSC_Widescreen_Dolby DVD. That is going to be 720 x 480 16:9.
or
Publish+Share/Disc/AVCHD disc (DVD) with preset = H.264 1920 x 1080i NTSC Dolby (more later on that)
The typical outcome is AVCHD DVD cannot be played on DVD player, whereas the DVD-VIDEO on DVD disc can.
However, a recent report by a Premiere Elements user with a $2000 Panasonic DVD Recorder/Player seems to suggest that at least she could playback AVCHD DVD on that player which is not a Blu-ray player. More on that another time.
More later.
ATR
Similar Messages
-
so i just updated my ipod 5 or tried to and now its coming up with the conect ipod to itunes and im trying and it wont show up in itunes that it is conected would love some help b4 i break it
See TS1538: iOS: Device not recognized in iTunes for Windows.
tt2 -
I use Iphoto as my primary download tool, then drag images into Adobe Bridge. Just today, when I tried to open a photo by clicking a thumbnail, all I got was an image of an exclamation mark and I couldn't drag the shot either. These are images I've successfully opened and dragged before. I would love guidance from anyone who knows a fix for this. Thanks! John
The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
What version of iPhoto?
As Larry says, your workflow doesn't make a whole lot of sense. If you're using iPhoto only for downloading then you're best off using Image Capture (in your Applications Folder) and just keep the whole database element out if it. If you're using iPhoto also to organise, then what are you using Bridge for? Anything you do in Bridge - or Photoshop - is unavailable in iPhoto if you work this way.
Regards
TD -
Would love help adding wired iMac to Airport Extreme.
Hello. I have found answers to many questions on this board, but I finally have to ask one myself.
I know that it is possible to have two macs (iMac and MacBook Pro) connect to the Airport Extreme, one wirelessly and one wired (via one of the LAN outputs). I currently have both connecting wirelessly. Everything works great, but since going wireless the functionality of my trading website has deteriorated. It’s not allowing me to connect to real time quotes and charts. They tell me I need a wired connection. Not sure I believe them because it did work for awhile, but…
So I want to set up my iMac to be wired. I’m reasonably sure of the first step - I need an ethernet cable to connect the iMac to one of the Airport Extreme’s LAN ports. I assume there is more to it than this, but I’m unsure of the next step. I expect that there might be some reconfiguring of the Airport Extreme, but maybe not. For the wired iMac, would I turn AirPort off and connect as I used to (via PPPoE) before going to a wireless connection?
I have the Airport Extreme connected to a Spreadstream 5100 DSL modem through AT&T.
Thanks in advance for any assistance.I need an ethernet cable to connect the iMac to one of the Airport Extreme’s LAN ports. I assume there is more to it than this, but I’m unsure of the next step
1) Connect an Ethernet cable from the iMac to one of the LAN <-> ports on the AirPort Extreme
2) Click the fan shaped Airport icon at the top of the iMac's screen and select Turn AirPort Off
3) Connect to the Internet -
I don't know how to contact you by email, but I just want you to know I had a terrible live chat with someone named Jenna, just not at 5:26pm PT. There was no survey at the end to rate and give my feedback, so I am doing so here. I wanted to spare your dignity and not take it out on the company by posting publicly on your own page, so I am doing so in this message because I still respect your service overall. I feel that you just have to know Jenna was cold, lacked any interest in my issue, and even sarcastic at times which I found extremely unprofessional. I've never been treated by any rep at Verizon this way before. I just had concerns about buying the iphone 6 and she in no way eased those concerns or gave proper explaining, so perhaps she needs more training. Not a good way to sell your company or product, that's for sure. If I wasn't on here through a company contract, I would easily have switched to another service. if you have further questions, feel free to reach me/message me back.
Speaking of being rude and needing a "workshop that you can attend on empathy, positive energy and how to be more kind to human beings", your message certainly speaks for itself. Out of our collective posts, YOURS are the only ones which resort to insults and name calling. I take it you WILL NOT be leading that workshop.
As to your statement "i got the message the first time", my two posts are about 2 unrelated items in your OP. It is NOT me posting the same information twice. The first was about the availability of your receipt and the 2nd was about your claim you thought you were replying in private to Verizon and you should read a bit more closely next time if the email you got led you to believe that. Seeing your reply to me, I can certainly understand your need to do so. I'm sorry if you think me trying to keep your personal information private and not being spread needlessly across the web seems rude.
Hopefully you got your receipt with the information you needed. -
I have alot of loose photos at home (old) and I would love to make a bunch of iphoto books and make the pages like whole page collages? How do I get my photos into iphoto in order to do this? Can I make a DVD at the drugstore and add them to iphoto?
You can make the collages easily if you have iWork. Just open a letter sized page in landscape mode and drag the photos onto the page, rotate and postiion as necessary. Then do a Print ➙ PDF ➙ Save PDF to iPhoto to get a 200 dpi jpeg version of the Pages page into iPhoto. From there you can add it to your book and use a blank page with the option to have an image as the backbround.
If you have a 3rd party image editor that supports layers you can create the collage with it.
OT -
I have a MacBook Pro, 15-inch, Mid 2009. I would love to upgrade to a Solid State Drive. What is the best possible upgrade I can buy. I need the specs and even brand name. Thank you to anyone who can help.
A 15" mid-2009 MBP RAM specifications are: 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM.
As has been pointed out, OWC is an excellent source for Mac compatible RAM. Crucial is another first rate source for Mac RAM. RAM from either vendor will work just as well as any purchased from Apple with the bonus of being less expensive and having a lifetime guarantee.
Ciao. -
I got a new 25" LG ultra wide monitor and would love to use it with my macbook pro Late 2011. I can't get the resolution to the recommended 2560x1080. Can anyone help?
I found a similar question on Amazon: http://www.amazon.com/2560x1080-resolution-macbook-resolution-option-/forum/Fx15 6DUSW1J104N/Tx14L2NHT4Y3F8K/1/ref=cm_cd_ql_tlc_al?_encoding=UTF8&asin=B00JM99DIU
It looks like you may need a mini-displayport to Displayport cable. You can also try holding the option key while clicking on "scaled" to see if the option you need comes up.
~Lyssa -
I am able to get on facebook but am not able to access any of the games i play kingdoms of camelot and farmville. Although i would love to use firefox i am not able to play my games therefore am forced to use regular explorer which is slooooow and really sux! what do i have to do in order to get this problem resolved
I should have explained further. The game opens in a new window over to the upper left of my screen, leaving the original page underneath. I tried minimizing it so that I could get to my toolbar and did the View > Zoom > Reset. This has no effect. The lower portion of the game is still not showing. Using other browsers the window or frame of the game is much larger, therefore everything shows.
-
Beginner would appreciate help on DVD burning
Hi all, I am very new to DVD Studio Pro and have managed to create my first menu with the help of the video tutorial. However, I am now up to burning my project and when i do so, the disc I burn only plays on a computer and not on any of my DVD players. Is anyone able to help me so I can work out how to burn a disc that is compatible to DVD players as well as computers? Thanks, i really appreciate your help. Caitie-rose
Wellcome to the forum!
First check if you authored a HD DVD. These discs will only play in your Mac player and NOT in regular DVD players.
Besides that, you can read this: * DVD Authoring/burning tips thread *.
But remember, you must create a SD DVD (standard definition) not HD DVD.
Hope that helps !
Alberto -
Flash player will not work on my computer, would love advice
I have windows vista. When I visit a web page that requires flash, it instructs me to download it (even though I'm sure I have it ialready...). I do so, it says it has downloaded successfully but I still cannot view the website. I have uninstalled my current version of flash and reinstalled the latest version numerous times. It even shows up in my list of programs. But each time I visit a site that uses it, it tells me I need flash to view it. Very frustrating. And suggestions would be appreciated. Thanks!
This was very helpful - thank you. I unchecked "active x filtering" and it seems to be working, under tools in IE. a simple solution, that may have taken me days to figure out myself! Hopefully it continues to work from thiis point forward. Thanks!
Date: Tue, 16 Apr 2013 12:42:26 -0700
From: [email protected]
To: [email protected]
Subject: Flash player will not work on my computer, would love advice
Re: Flash player will not work on my computer, would love advice
created by Chris Campbell in Installing Flash Player - View the full discussion
Do you see an animation and version number when you visit the Flash Player Version page? If you are using Internet Explorer, please verify that the following two FAQs check out. Enabling Flash Player in Internet Explorer ActiveX Filtering in Internet Explorer
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5240948#5240948
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5240948#5240948
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5240948#5240948. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Installing Flash Player by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
In the market for a new computer would love some feedback
Ok so I have a dilemma,
First problem is I can't decide between a laptop and a desktop if I went the laptop route I would go with the Asus N53qm
Asus N53 Specs
Its got i7 720qm, some sites have it with 740qm, ddr3 memory, 425m cuda video card,
Id upgrade the ram to at least 8gb or ram maybe upgrade more down the road.... Id be editing video off esata or usb 3.0
I see the advantage of having a laptop being able to work on the road, taking it to my bed....
Id plug it into an external monitor/mouse, keyboard when at my desk.
My other option I would be a desktop
Specs would be,
x58 motherboard, havnt decided which one yet, theres a lot that seem to all have the same features, eg. msi, asus, gigabyte.
Again ddr3 memory I notices 2000 was not much more than 1333, so yea as much ram as I want down the road....
GTX 470
850 watt corsair
Intel Core i7 950
Thermaltake A60 Case
Again most of my projects would most likely be through esata or usb 3.0 not sure which is better...
Oh and I would be editing HD Video from a flash based camcorder, Cannon HSF 10 to be specific, so its .mts avchd
Anyways, how much of a performance increase would I get from the desktop over the laptop?
I notice a lot of people overclock, is that really necessary, isnt an i7 pretty fast stock?
Thanks and please let me know your thoughts, advice changes to my specs...Would love some feedack from the experts on this config available at Tiger direct for about $1,000
My Goal: to edit AVCHD footage using CS5....looking at the specs below specifically the processor, the video card and the RAM..what do you think?
( I currently have CS3 on an HP Quad Core 2.4Ghz w/ 8GB RAM which is great for SD, but I realize that when upgrading to CS5 and editing my Sony HDR-500v AVCHD footage I'l need much more power) Thanks!!
Lenova Brand PC
Specifications
Condition:
New
Lifestyle:
Entertainment
Operating Systems:
Windows 7 Home Premium 64-Bit
Platform:
PC
Orientations Allowed:
Vertical
Colors:
Black
Red
PS/2 Connectors:
1 - Mouse
1 - Keyboard
USB Ports (Total):
8
Audio Out Jacks:
3
1 - Headphone
Line In Jacks:
1
Microphone Jacks:
2
VGA Ports:
1
HDMI Ports:
1
S-Video Connectors:
1
S/PDIF Connectors:
1
Processor Brand:
Intel
Processor Class:
Core i7
Processor Number:
860
Processor Speed:
2.80GHz
Processor Interface:
Socket 1156
Processors Supported:
1
Processors Onboard:
1
Memory Type:
DDR3
Total Memory:
8.0GB
Memory Speed:
1066MHz
Hard Drives Included:
1
Hard Drive Types:
Hard Disk Drive
Interface:
SATA
Capacity:
1TB
Speed:
7,200RPM
Optical Drives Included:
1
Optical Drive Type:
DVD±R/RW
Optical Drive Class:
DVDRW
Supplemental Media Type:
Card Reader
Capacity:
16-in-1
Audio Description:
Integrated Audio
Channels:
5.1 channel Surround Sound Support
Graphics Description:
Dedicated Graphics
GPU/VPU:
NVIDIA GeForce GT 320
Video Memory:
1GB dedicated
Video Interface:
HDMI
VGA
WiFi Chipset:
Integrated
WiFi Data Transfer Rate:
up to 300Mbps
WiFi Description:
Wireless LAN 802.11 b/g/n
WiFi Standards Supported:
802.11b
802.11g
802.11n
LAN Data Transfer Rate:
10/100 Mbps
LAN Description:
Fast Ethernet
LAN Interface Type:
RJ-45
LAN Ports:
1
Mouse Type:
Optical
Connection Type:
USB
Power Source:
USB Connection -
OK WE HAVE DONE IT AN ORANGE PROTECTIVE SCREEN OVERLAY FOR IPOD AND IPAD STOPPING JOHN'S SEIZURES AND STOPPING EYE PROBLEMS WITH USAGE ABLE TO CUT ANY SIZE FOR PHONES EG
Contact me Steve the idea is great and the pictures are reveal a better depth perception of colour call me a Mum that created a diffence for her son and kept him communicating on his ipod and his ipad proffessors were amazed at childrens hospital and would love to show you my ideas in making it built in to your ipod and ipads or any computer for that matter everyone i show is blown away not only that but a wider customer level will be reached from a Mum that made a difference for her son that was unable to communicate and then had seizures so developed my own cover that allows him to chat all day without having any eye problems.
So we now sell the covers on ebay to help others access technology that they need in order to survive and live happily as without his ipod or ipad and him telling us what was wrong he would of died he had respritory lung disease photosensitive epilepsy a metabolic condition that could of killed him anytime from stroke or seizure battled with using all types of technology but now is a dream come true.
Would love for this to be enabled in the setup of all computers alike to protect eyes and allow more users to speak and communicate a big thankyou to the creators and designers fabulous but please can you call me as this could make you even better i mean will and also give me more time.
From one praying God fearing Mum
Nadine
Call me i do have better pics they were too big to upload orange covering on right hand sideGoing through the feedback and support pages will be a waste of your time. Apple won't respond to feedback, and support can't do anything regarding product suggestions, particularly not from a company with an existing product they wish to sell. The only attention you might get from Apple would be possible interest in selling your product through the Apple Stores, and I don't know how Apple chooses the third-party products they sell. All I could suggest would be writing to Apple's corporate headquarters:
Apple
1 Infinite Loop
Cupertino, CA 95014
with perhaps "Attention: Retail Sales Division" and telling them about your product and your interest in it being sold through the Apple Stores.
Regards. -
Would love to be able to change the Standby settings.
I would love to be able to change the Standby settings on my itouch. Particularly when I have my itouch plugged into a charging unit or computer. I would like the standby to not turn off my itouch screen when it has external power. Is there a way to do this?
Well, hopefully a developer can help and update the device to allow us to do just that. Perhaps one can tell us if they might consider working on just such an option. I mean seriously, if it's plugged in I want an option as to whether the screen should go off or not on me. I don't think it's an unreasonable request and it's probably not that hard to implement. I'm not a developer however, so how should I know.
Sorry for not referring to the device correctly (Julian), but I don't really care what it's called. I just want it to work better. I did however refer to it closely enough that you knew what I was talking about.
I can't be the only one that would like it to do what I asked. -
Hi,
I would appreciate if anyone could give me some solution to the below problem.
There are two tables one is master and the other is detail.
Master Table - grade_master
grade_code varchar2(5)
customer_cd varchar2(5)
Detail Table - grade_detail
grade_code varchar2(5)
element_cd varchar2(2)
min_value number(7,3)
max_value number(7,3)
Now in one of the transaction entry, i need to show the LOV based on grade master table and grade detail table. My client wants to display grade code and customer code in LOV and when the user scrolls through the record in LOV based on the record it should display or popup the details of it i.e element code, minimum value and maximum value. The client gave me the example of windows (Start - Programs - and in programs when we scroll up and down it pertaining records are show on the right side based on the selection we made or he wants to show as tool tip). Please note for one grade there can be more than one record that is the reason I have created detail table for grade.
I hope my explaination regarding my problem is ok.
Please suggest me or give me some solution to solve the problem and fulfill my client.
Message was edited by:
skThanks Indu for replying.
Actually my cleint wants to see the element detail i.e. (Element code,min value,max value), the moment the record is highlighted or the cursor scrolls to that record in LOV (master lov - grade code,customer code). Something similar to master-detail entry form.
The best example to understand is department and employee table. Let assume we create a block based on dept table in tabular form and another block based on employee table in tabular form and then we make relation between this on dept_cd. So when we run the form, as the we scroll the department record(master form) accrodingly the detail record changes i.e. data from employee for that dept. He wants this sort of help or LOV
What suggestion you gave would not help me.
Could somebody help to give me some brilliant solution.
Maybe you are looking for
-
My laptop, iPad, and iPhone are being clogged by repeated iCal alerts. Every time an event is added, it seems another Calendar is also added. When I view the Calendar list in iCal, there are over 100...and the number is growing. They can not be de
-
Error during activation a message mapping
Hi, I get this error during activation a message mapping: source code has an syntax error: D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Mapf1f9db20a78a11dac004000f1ff80130/source/com/sap/xi/tf/_Source2Target_.java:2: packag
-
How do you get your iTunes from your computer to Ipad ?
I need help! Have been trying to do this for many days does any one know how to? Thanks a heap Policedog19
-
Calling Stored Procedure from JDBC Adapter
Hello, I am Updating a SQL Server Table using JDBC Adapter. Now I have multiple input rows and the procedure needs to be called for each set. Do I need to use multimapping for this or just generating multiple <b>Statement</b> node will solve? Also Fo
-
How to schedule ETL jobs to run periodically after BI Apps is up and runnin
Hi, How do you schedule ETL jobs to run periodically after BI Apps is install and configured? Is there document out there that explains how the ETL scheduling is setup? Thanks