BM 3.8 and legacy VPN

HI
I have a Bm 3.8 sp5 on NetWare 6 sp5. I want to update to Gwava 4 which
needs to be at least on NetWare 6.5 sp5. I am concerned about the legacy
vpn I have that talks to a NetWare 6 sp5 BM 3.7 sp3 slave.
Is this an update I can make? The gwava indicates I might be able to run
on NetWare 6 sp5 but its not tested much.
Thanks,

Originally Posted by mrosen
Hi,
Will K wrote:
>
> HI
>
> I have a Bm 3.8 sp5 on NetWare 6 sp5. I want to update to Gwava 4 which
> needs to be at least on NetWare 6.5 sp5. I am concerned about the legacy
> vpn I have that talks to a NetWare 6 sp5 BM 3.7 sp3 slave.
>
> Is this an update I can make?
Yes, you can, and actually should use Netware 6.5 SP6, not SP5. However,
you can *not* go beyond Netware 6.5 SP6. Starting with SP7, the legacy
VPN (SKIP) breaks completely. SO, SP6 is ok, SP7 isn't.
Is it possible to back out sp7 to get the skip clients working again?
CU,
Massimo Rosen
Novell Product Support Forum Sysop
No emails please!
Untitled Document

Similar Messages

  • What is the diff b/w flat file and legacy system?

    Hi everyone,
           when v say v r working on scenario FILE to FILE? which format of file r v usually working on? and what is the diff b/w flat file and legacy system?
    thanx

    Hi,
    <i>when v say v r working on scenario FILE to FILE? which format of file r v usually working on?</i>
    >>>Many a times it will be a Flat file with CSV format,Tab delimited format, fixedlength fields.
    <i>what is the diff b/w flat file and legacy system?</i>
    >>>We can not differeniate like this..
    Flat file may come from any systems, it may be live system or legacy system.
    Legacy system- is something like old, or past one. If you talk about SAP , then older versions of SAP can be  called as a legacy system.
    So it may be a file system, or any system which is old version but it doesnot mean it is not in use,
    Regards,
    Moorthy

  • ASA 5505 site-to-site VPN tunnel and client VPN sessions

    Hello all
    I have several years of general networking experience, but I have not yet had to set up an ASA from the ground up, so please bear with me.
    I have a client who needs to establish a VPN tunnel from his satellite office (Site A) to his corporate office (Site Z).  His satellite office will have a single PC sitting behind the ASA.  In addition, he needs to be able to VPN from his home (Site H) to Site A to access his PC.
    The first question I have is about the ASA 5505 and the various licensing options.  I want to ensure that an ASA5505-BUN-K9 will be able to establish the site-to-site tunnel as well as allow him to use either the IPsec or SSL VPN client to connect from Site H to Site A.  Would someone please confirm or deny that for me?
    Secondly, I would like to verify that no special routing or configuration would need to take place in order to allow traffic not destined for Site Z (i.e., general web browsing or other traffic to any resource that is not part of the Site Z network) to go out his outside interface without specifically traversing the VPN tunnel (split tunneling?)
    Finally, if the client were to establish a VPN session from Site H to Site A, would that allow for him to connect directly into resources at Site Z without any special firewall security rules?  Since the VPN session would come in on the outside interface, and the tunnel back to Site Z goes out on the same interface, would this constitute a split horizon scenario that would call for a more complex config, or will the ASA handle that automatically without issue?
    I don't yet have the equipment in-hand, so I can't provide any sample configs for you to look over, but I will certainly do so once I've got it.
    Thanks in advance for any assistance provided!

    First question:
    Yes, 5505 will be able to establish site-to-site tunnel, and he can use IPSec vpn client, and SSL VPN (it comes with 2 default SSL VPN license).
    Second question:
    Yes, you are right. No special routing is required. All you need to configure is site-to-site VPN between Site A and Site Z LAN, and the internet traffic will be routed via Site A internet. Assuming you have all the NAT statement configured for that.
    Last question:
    This needs to be configured, it wouldn't automatically allow access to Site Z when he VPNs in to Site A.
    Here is what needs to be configured:
    1) Split tunnel ACL for VPN Client should include both Site Z and Site A LAN subnets.
    2) On site A configures: same-security-traffic permit intra-interface
    3) Crypto ACL for the site-to-site tunnel between Site Z and Site A needs to include the VPN Client pool subnet as follows:
    On Site Z:
    access-list permit ip
    On Site A:
    access-list permit ip
    4) NAT exemption on site Z needs to include vpn client pool subnet as well.
    Hope that helps.
    Message was edited by: Jennifer Halim

  • ASA 5505 Site to Site and Web VPN

    Hello all, I need to add a site to site tunnel from a an ASA 5505 (ver 8.05) to a Sonic wall appliance. The problem is, the ASA already has remote access VPN and anyconnect VPN configured. I'm not sure if its possible to add another secured tunnel to the device. Ive already got one NAT 0 statement.
    Thanks for your expert opinions!

    Hi,
    There should be no problem adding a Site to Site VPN on the ASA even if it has Client VPN configured.
    If you for example have an "inside" interface which has NAT0 configuration like
    nat (inside) 0 access-list NAT0
    You just add the needed ACL lines to that existing ACL for the L2L VPN.
    On the basis of the information you provided I dont see any problem configuring the L2L VPN on the ASA.
    - Jouni

  • ASA 5505 as a SSL VPN Server and Easy VPN Client at the same time?

    Is it possible to configure and operate the ASA 5505 as a SSL VPN server and Easy VPN Client at the same time? We would like to configure a few of these without having to purchase additional ASA 5505 and use a 2 device method (1 SSL VPN Server and 1 Easy VPN Client). Thanks in advance.

    I don't think it is possible. Following links may help you
    http://www.cisco.com/en/US/products/ps6120/products_configuration_guide_chapter09186a008068dabe.html
    http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008071c428.shtml

  • Performance end to end testing and comparison between MPLS VPN and VPLS VPN

    Hi,
    I am student of MSc Network Security and as for my project which is " Comparison between MPLS L3 VPN and VPLS VPN, performance monitoring by end to end testing " I have heard a lot of buzz about VPLS as becoming NGN, I wanted to exppore that and produce a comparison report of which technology is better. To accomplish this I am using GNS3, with respect to the MPLS L3 VPN lab setup that is not a problem but I am stuck at the VPLS part how to setup that ? I have searched but unable to find any cost effective mean, even it is not possible in the university lab as we dont have 7600 series
    I would appreciate any support, guidence, advice.
    Thanks
    Shahbaz

    Hi Shahbaz,
    I am not completely sure I understand your request.
    MPLS VPN and VPLS are 2 technologies meant to address to different needs, L3 VPN as opposed as L2 VPN. Not completely sure how you would compare them in terms of performance. Would you compare the performance of a F1 racing car with a Rally racing car?
    From the ISP point of view there is little difference (if we don't want to consider the specific inherent peculiarities of each technology) , as in the very basic scenarios we can boil down to the following basic operations for both:
    Ingress PE impose 2 labels (at least)
    Core Ps swap top most MPLS label
    Egress PE removes last label exposing underlying packet or frame.
    So whether the LSRs deal with underlying L2 frames or L3 IP packets there is no real difference in terms of performance (actually the P routers don't even notice any difference).
    About simulators, I am not aware of anyone able to simulate a L2 VPN (AtoM or VPLS).
    Riccardo

  • What is a R/3 system, logical system, and legacy system...???

    Hi,
    Please throw some light on...What is a R/3 system, logical system, and legacy system...???

    Hi,
    R/3 system is a normal SAP system that stores data.
    A legacy system is an existing computer system or application program which continues to be used because the user does not want to replace or redesign it.
    Logical System:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/c8/5aa2a0deb91548a1842f8485dee4a2/frameset.htm
    Technical System:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/24/8fa93e08503614e10000000a114084/frameset.htm
    Regards,
    Subhasha

  • Error with Ericsson h5321gw and IPSEC VPN-Connections

    There is an error in the Lenovo drivers [7.x] for the Ericsson h5321gw UMTS module.
    Symptoms on Windows 7 x64:
    UMTS is working fine. When you connect a vpn ipsec connection though the UMTS , the internet connection (and the vpn as well) gets unstable and has a packet loss of 30% to 50%.
    Solution:
    Install the UMTS drivers in the NDIS 5.0 mode on Windows 7. (The only problem is, that the system boot takes about 1 minute longer with the ndis 5 drivers).
    Further Reading: Message 5: http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/Outlook-Exchange-connection-unstable-on-T52...
    Howto form the Lenovo Forum:
    Force the installation to install Ericsson's vista driver instead of win7 driver. Vista driver is NDIS 5. Installation can be done.
    -> extract the Ericsson drivers package but don't let it install the driver. There should be extracted a setup.exe file
    -> do the installation with command: setup.exe /zFORCEVISTA
    This helped for us.
    Tip:
    If you want to install the win7 driver back, it can be done with command: setup.exe /zFORCEWIN7
    Otherwise using the setup.exe will install the vista ndis 5 when since it once have been told to to install it by /zFORCEVISTA
    I hope, Lenovo can solve this issue quickly.
    Greetings

    I’m not sure this is the same issue you guys are running into, but I’m using the built-in Ericsson h5321gw and ATT SIM on an i7 X1 Carbon. I am required to use a Cisco VPN Client and after connecting successfully to my VPN endpoint via ATT WWAN, I could not get any data in/out the tunnel.
    I tried in both Windows 7 and Windows 8 OS, even trying the setup.exe /zFORCEWIN7 work around to no avail.
    After doing some searching, I came across a blog post describing the same issue I had.
    There is an update to Windows’ DNE that actually solved the issue for me using the standard Erricson W8 (and W7) drivers. (I also performed the h5321gw fireware update from Lenovo, but I did that before the DNEUpdate – that alone did _not_ fix it)
    DNEUpdate x64: ftp://files.citrix.com/dneupdate64.msi
    DNEUpdate x86: ftp://files.citrix.com/dneupdate.msi
    Hope this helps.
    Credit from: http://stenby.wordpress.com/2012/10/03/cisco-vpn-client-and-built-in-lenovo-h5321gw-3g-card/

  • Border Manager 3.8.5 and S2S VPN

    I have a couple of questions with Border Manager and S2S VPN. Everything
    is up and running, we can ping both servers (Netware 6.5.6), we can ping
    workstations attached to each others network, we can access programs from
    each others network. Everything seems to be working great. The question I
    have is this - on both servers, under Remote Manager, VPN Monitoring, both
    show as 'Being Configured'. I do not think that this is an issue but there
    is another error in the Audit Log. The error -
    "Proposal Mismatch - Quick Mode: ESP - transform mismatch mine: esp des
    his: esp 3des dst: xx.xx.xx.xx src: xx.xx.xx.xx cookies
    my-his:17B2D88772DE1D61 - 4F15FFD50824F821".
    This appears on both servers Audit Log.
    Is this a legit error or a information error? I used Craig Johnson's 'A
    Beginner's Guide To BorderManager 3.x' but ended up making both VPN's
    masters as per Novell TID - 10095268.
    If anyone has an insight as to what these errors are and if there is a
    fix it would be greatly appreciated.
    Kelly

    Kelly Burnside wrote:
    > I have a couple of questions with Border Manager and S2S VPN. Everything
    > is up and running, we can ping both servers (Netware 6.5.6), we can ping
    > workstations attached to each others network, we can access programs
    > from each others network. Everything seems to be working great. The
    > question I have is this - on both servers, under Remote Manager, VPN
    > Monitoring, both show as 'Being Configured'.
    Sometimes the imanager snapin can not get the current status of the
    connection from vpinf so it shows 'Being Configured'. It can take some
    times, maybe days to change the status.
    I do not think that this is
    > an issue but there is another error in the Audit Log. The error -
    > "Proposal Mismatch - Quick Mode: ESP - transform mismatch mine: esp des
    > his: esp 3des dst: xx.xx.xx.xx src: xx.xx.xx.xx cookies
    > my-his:17B2D88772DE1D61 - 4F15FFD50824F821".
    This is not an error, it is an information message.
    > This appears on both servers Audit Log. Is this a legit error or a
    > information error? I used Craig Johnson's 'A Beginner's Guide To
    > BorderManager 3.x' but ended up making both VPN's masters as per Novell
    > TID - 10095268. If anyone has an insight as to what these errors are
    > and if there is a fix it would be greatly appreciated.
    > Kelly
    Everything is fine, nothing to be worry about.
    gonzalo

  • What are the differences between file vault and legacy file vault?

    what are the differences between file vault and legacy file vault?

    Legacy is an encrypted disk image of your Home folder, FileVault2 is whole disk encryption

  • [svn:cairngorm3:] 18029: Moved Spark effect behavior into behavior package and legacy Flex 3 effect behavior into mx package .

    Revision: 18029
    Revision: 18029
    Author:   [email protected]
    Date:     2010-10-06 06:47:03 -0700 (Wed, 06 Oct 2010)
    Log Message:
    Moved Spark effect behavior into behavior package and legacy Flex 3 effect behavior into mx package. Renamed focus bug example https://bugs.adobe.com/jira/browse/CGM-41
    Ticket Links:
        http://bugs.adobe.com/jira/browse/CGM-41
    Modified Paths:
        cairngorm3/trunk/libraries/Popup/.flexLibProperties
        cairngorm3/trunk/libraries/PopupTest/.actionScriptProperties
        cairngorm3/trunk/libraries/PopupTest/src/PopUpBehaviorsSample.mxml
        cairngorm3/trunk/libraries/PopupTest/src/PopUpMXMLExample.mxml
        cairngorm3/trunk/libraries/PopupTest/src/PopUpParsleyExample.mxml
        cairngorm3/trunk/libraries/PopupTest/src/samples/ModulePopups.mxml
    Added Paths:
        cairngorm3/trunk/libraries/Popup/src/com/adobe/cairngorm/popup/behavior/ZoomAndFadeBehavi or.mxml
        cairngorm3/trunk/libraries/Popup/src/com/adobe/cairngorm/popup/behavior/mx/
        cairngorm3/trunk/libraries/Popup/src/com/adobe/cairngorm/popup/behavior/mx/ZoomAndFadeBeh avior.mxml
        cairngorm3/trunk/libraries/PopupTest/src/BugCGM41StartUpFocus.mxml
    Removed Paths:
        cairngorm3/trunk/libraries/Popup/src/com/adobe/cairngorm/popup/behavior/ZoomAndFadeBehavi or.mxml
        cairngorm3/trunk/libraries/Popup/src/com/adobe/cairngorm/popup/behavior/spark/
        cairngorm3/trunk/libraries/PopupTest/src/BugStartUpFocus.mxml

  • Since I upgraded to Lion, my RSA securid token and Cisco VPN client doesn't work any longer. Anyone have suggestions on how to fix that?

    Since upgrading to Lion, I can no longer use VPN because my RSA securid token and CIsco VPN Client won't load. Any suggestioins out there?

    .

  • Creative cloud.exe and legacy fullscreen applications

    I've noticed that there are problems on my system (Win8.1, nVidia GTX660) and legacy fullscreen applications (games).
    This only affects some applications. It runs, then loses focus. When I try to activate the main window it immediately loses focus (again).
    The workaround for me was to kill creative cloud.exe. I originally wanted to submit a bug report but got here
    One application that behaves like this is Deus Ex: Invisible War.

    I can’t get the widget browser to connect and I can’t sign in within the program.
    “Unable to load WSDL. If currently online, please verify the URI and/or format of the WSDL (http://www.adobe.com/cfusion/exchange/exchangedwwidgetsfacade.cfc?wsdl)”)
    I spent upwards of two hours trying to sort this last night and none of the advice on the forums got me there so I gave up and decided to just buy it and download it from the web.
    Now I have this problem instead.
    Any help with sorting either problem would be appreciated

  • IPad and PPTP VPN - Internet access (e-mail & Safari) not working

    Hi there!
    I've got an iPad2 (WiFi only) and need to configure it to use Witopia PPTP VPN, which is the VPN provider I've been using for a long time on my desktop and netbook.
    Configure the iPad was an easy task, and I was able to successfuly authenticate and establish a PPTP session with any of the Witopia servers.
    The problem is that once established the PPTP session, if the "send all traffic" option is ON, I have no Internet access at all (no e-mail neither browsing with Safari). Then, if I stop VPN, turn OFF the "send all traffic" option in the iPad, and start VPN again, I have Internet communication back and everything starts working fine. I've been fiddling with this in my home network (D-Link Dir-655 router using the IP 192.168.0.1 addressing scheme for my LAN).
    Obviously, I decided to leave the "send all traffic" option OFF, but then I discovered that doing this my Safari traffic is not encrypted and my IP is not masked, i.e. the VPN is up and running, I have normal Internet traffic, but the service to be provided by the VPN for some inknown reason is not happening.
    Does anyone have a clue about what's going on ?
    TIA
    RTadeu

    Have you tried a battery pull?  If not, give that a try and then try again. 
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • UEFI and Legacy .... tips

    I was  installed ubuntu alongside windows8 but while restarting PC directly windows8 loaded, even I enabled Legacy mode. In BIOS setting it was clearly given that "In Legacy mode both UEFI and Legacy are available and UEFI has heigher priority ".
    How to change the priority and how to load both operating systems and give a choice to us to select one of them while starting PC. 
    " HP Pavilion g6-2202tx Notebook PC "
    please provide me the details.

    I found that there is no way to change the boot order priority ...,
    this is the link saved my time...
    http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-Software-Recovery/UEFI-vs-Legacy-Boot-order/m...

Maybe you are looking for