BM access rule and port for Web Manager

The Netware Webacess and the Netware Web Manager is working fine
internally. What are the ports to open and the rules to create on the
Border Manager so it can be access froum outside. How to configure the BM
Omar

In article <MLMqe.411$[email protected]>, wrote:
> The Netware Webacess and the Netware Web Manager is working fine
> internally. What are the ports to open and the rules to create on the
> Border Manager so it can be access froum outside. How to configure the BM
>
WebAccess just (normally) wants port 80. You can static NAT it, or reverse
proxy it through BMgr. Older versions of BMgr (3.6 or earlier) put in
default filter exceptions for reverse proxy (both port 80 and 443), but
later versions require you to add your own filter exceptions.
NetWare Web Manager - do you mean for Novonyz Web Server? If so, the port
used depends on what you configured for it. You could use static NAT, or
generic tcp proxy, or (I think) reverse proxy for whatever port Web Manager
is using. Newer web manager for Apache uses port 2200, I think.
Craig Johnson
Novell Support Connection SysOp
*** For a current patch list, tips, handy files and books on
BorderManager, go to http://www.craigjconsulting.com ***

Similar Messages

  • Dynamic Host and Port for Web Proxy

    hi,
    When I create a web proxy in JDev I supply the hostname and the port for the web service. The code is then compiled and then deployed. However I want the host and port to be dynamic (kept in a varaible) so when I move my deployment from Development to Test server I just need to change a value in a database or text file. I don't want to re-compile and deploy the code when I move servers. Is there any way to do this??
    Thanks
    Stephen

    Hi,
    not so in the WSDL file that is created. If from the client side access, then WS poxy classes allow you to do this
    Frank

  • How differs soft proofing in View - Proof Colors and Save for Web - Preview?

    Hi, I'm currently confused with one inconsistency. My working space is Adobe RGB and I use calibrated monitor. After I finish my work on image I go to View -> Proof Colors -> Internet Standard RGB. Image looks terribly with the overall violet/purple hue. Then I open Save for Web dialogue, I check Convert to RGB and from Preview options I select again Internet Standard RGB. Now the previewed image looks as expected. The same results I get if I manually convert image to sRGB before soft proofing and saving for web. So... what's the difference between preview in Proof Colours and in Save for Web? Thank you for your opinions.

    Hi 21, thank you for your input. All what you say makes perfect sense, it is exactly how it should work and how I expected it works. My problem was, that while testing this theory in practice, I have come to different results. I expected, that if I stick to the theory (meaning keeping in mind all rules you perfectly described) I should get the same result in both soft proof and save for web preview. But... it was not the case. Save for web preview offered expected results while soft proof was completely out of any assumptions and colours were totally over-saturated with violet/purple hue. Also, Edit -> Assign Profile -> sRGB gave another result then Soft Proof -> Custom -> assign sRGB (preserve numbers), but the same as save for web preview.  What troubled me was why this is so.
    Today I've made tests on hardware calibrated monitor and... everything works exactly as you describe and as I expected.
    Then I went back to another monitor which is software calibrated (both monitors are calibrated with X-Rite i1 Display Pro). And again... I received strange results described above. So I did the last thing I thought and disabled colour calibration on that monitor. And suddenly... both soft proof and save for web preview gave the same result.
    Probable conclusion: soft proof and save for web preview (together with Edit -> Assign Profile) are programmed to use different algorithm which is evident on standard gamut monitors with software calibration. Question can be closed.
    Gene and 21, thank you for your effort.

  • Script to change the priorty of all rules and monitors in a Management Pack

    Script to change the priority and severity  of all rules and monitors in a Management Pack in an override MP .We are deploying an MP in production and don't want the helpdesk to take any action on any alerts, so want to set all of them as informational.Once
    they are reviewed then we will delete that override mp
    Can some one help me with a script
     

    Is this MP sealed?  Doesn't really matter..  Unseal the MP if it is sealed.  Now you have access to the RAW XML.  Alert severity and priority have xml tags.  You should be able to do a search and replace and change all the various
    levels (0-3 or whatever they are) to the levels and priority you want.
    Then you can seal the mp with your own key, or just roll it into prod as an unsealed MP.
    This seems, to me, like the quickest and easiest way to make all of these changes at once.  To bulk override everything, not even sure it's still around or even works, there was a tool called Override Explorer, and you could select multiple monitors/events
    and create overrides.  I can't remember very much about the tool because we didn't use it much, but I think it did this with live data, meaning it connected to your management server, and you made the changes in real time.  
    Of course you wouldn't want to do this in production, so do it in a lab, then export the override mp and put it in prod.
    There is probably some snazzy way to do this with PoSh, but I am not aware of any atm.
    Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

  • Photoshop crashes when I try and save for web and devices. Making the image size smaller does not help.

    I'm trying to make a lopping .gif from an animation that I made. It's 147 total frames. It's crashed about 6 times now every time I either try and Save for Web or even just save the document on my desktop so in case it crashes I can reopen PS and recover it. Making the image size smaller (original size is 1920 x 1080 with resolution 72) does not help, it still makes the *ding* error when I attempt to save. I made the image more than half of the original size and the Save for Web box actually came up that time, but when I tried clicking save it said there was an error and PS crashed without warning.

    Look at the crash report for your Photoshop crashes see what they show

  • When I try and Save for Web in Photoshop CC I receive an error message saying 'The operation cannot be completed. The requested operation cannot be perfomed on a file with a user-mapped selection open'.

    When I try and Save for Web in Photoshop CC I receive an error message saying 'The operation cannot be completed. The requested operation cannot be performed on a file with a user-mapped selection open'. This happens with any of my files not just one in particular...
    Can anyone help solve this please?

    ELEMENTS 12 AND ELEMENTS 13
    Upgraded to 13 Thinking might resolve the issue.
    Was working fine up until we had "Tech" come in the office and "up grade some stuff"
    then all of a sudden i started getting this message, something happened but i don't have a clue what.

  • Slice and 'saving for web and devices' not saving all images in selected area

    Ive designed my site in illustrator and now im using slices and save for web and devices.
    When I save a slice as a jpeg or gif it saves the text and but not the background image behind it. I haven't locked the background image and all the content is on the same layer in illustrator so why is it doing this and how can I stop it?
    Thanks
    James

    Thanks for your reply.  Yes, my Photoshop CS5 is updated to 12.1.  I'm running OSX 10.5.8 and have tried viewing in Safari, Firefox, and Chrome with no improved success.
    I have been reading these forums for about 3 hours trying to find the answer to this question but am still at a loss.  I have found one article here: 
    http://stackoverflow.com/questions/7974006/overlapping-image-in-photoshop-splice-how-to-fl oat-with-css
    which explains using an "absolute" value in CSS to lock images in place.  I'm currently working in Dreamweaver to see if it's a common error in Photoshop when resizing browser but is easily fixed on the CSS side.
    Any help would be appreciated
    Thanks!

  • DMS and cFolders for requirements management

    Hello SAP Gurus
    Iam suggesting SAP DMS and cFolders for requirements management for an Automobile OEM client.
    The requirements documents consist of software, hardware, mechanical etc...
    Did any of you implement these modules for a similar scenario?
    I want to know the expert feedback in this scenario.
    Regards
    Prasad K

    Hi Prasad,
    Given the way i understand 'Requirements Management', it's a holistic approach which includes identification, documentation, analysis, prioritization and agreement on requirements and then controlling the changes and communicating it to relevant internal and external stakeholders.
    This is an ongoing process throughout a project.
    In  this perspective, DMS(for handling documentation),c-folders(collaboration,communication wrt ERP objects like docs,BoM et-al),c-projects(colloborative pjt mgmt) and ECM(managing changes) would be an ideal proposition to handle requirements management in Automitive sector effectively. You may explore other solutions for a finer degree of control.
    Regards,
    Pradeepkumar H.

  • What steps do I take to edit raw files and save for web use, such as Instagram, Facebook, Websites, and emailing?

    What Steps do I take to edit raw files and save for web use, such as Instagram, Facebook, Websites, and emailing?

    When you open a raw file it will open in Adobe camera raw. That is where you can do most of the editing. Then it will be placed inside Photoshop where you can do more if needed.
    Now you can use the save for web dialog to export your image as a png or jpg to use on those sites.

  • Documentation and Samples for Web Intelligence Extension Points url.

    I have been trying to find documentation and samples for Web Intelligence Extension Points. Can someone give me the link ?
    The files are
    1.)  webi_dhtml_EP_samples.zip
    2.) xi3-2_web_dhtml_customization_and_integration_ext_points_en.pdf

    Hello,
    I'm trying to find the API documentation and samples for Web Intelligence Extension Points for BO XI 3.1.
    The downloadable ZIP is no longer available at the URL Simply customize your WebIntelligence User Interface
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80f21e8b-711d-2c10-6f9a-ae191653f848
    Anyone could you give me a new link for this feature ?
    Thank in advance.
    Sincerely,

  • RV180W - problems on rules and port redirections

    Hello,
    I installed a RV180W router a month ago.
    Our production server has to retreive informations on a remote server so I set up the rules and port redirections accordingly on the firewall.
    I noticed that some times the rules didn't work anymore and I had to reboot the RV to fix it.
    The rules are still active on the router's admin panel as well as the services and the port redirection. The last firmware is installed.
    Does anyone experienced the same problem and found a fix?
    Thanks in advance,
    Best regards

    I hate to say it, but there are issues like this with the rv series.  Have you replace the router with another one?  That's the first thing I would try since you can probably exchange it easily right now.
    Huntsville's Premiere Car and Bike e-magazine: www.huntsvillecarscene.com

  • Services port for web access

    I would like to change default port for all web services from port 80 to port 8080 and have full access to webmail, iCal, web page, wiki
    How can I do that?

    Hello Jay!
    Take a look at this doc:
    http://www.cisco.com/en/US/docs/solutions/Verticals/mstdcmsftex.html#wp609677
    RPC requires source ip sticky in order to operate correctly through a loadbalancer.  In the doc, they also walk through doing RPC over http/https - however, I have seen configurations where ACE is not L5-L7 that use RPC on port 135 as a L4 rule with sticky and it appears to work ok.
    Regards,
    Chris Higgins

  • Change/Configure Host and Port for the Web Service Proxy with Server

    Hi,
    Is there a way to configure Host and Port in generated proxy for Web service depending upon server. (ADF 11g)
    Scenario:
    We are consuming Credit Card web service from a service provider and have different Host and Port details for development, QA and Prod.
    So we created proxy classes using wsdl for development and things work fine, but when deploying code to QA or Prod we need to change the Host
    and Port details.
    Is their a way we could user variable's for Host and Port which looks to some configuration file to evaluate their values
    based on server.
    I am a bit new to this web service .. will appreciate if someone could provide an example.
    Thanks.

    Are you using Web Service Proxy or Web Service Data Control?
    If you are using Web Service Proxy. Right click on your Proxy --> Properties --> Port Endpoints. Here you can change the IP & Port details for each port.
    Venkat

  • Publish the port forwarding rules and req. for customers to use the FiOS TV features they pay for!

    Please read this thread and vote.
    http://forums.verizon.com/t5/Share-Your-Ideas-with​-Verizon/Publish-the-port-forwarding-rules-and-req​...

    Here they are, but - yes it would be great if Verizon published these, or at the very least linked to Actiontec's Website, where they publish the rules as well.   or at least sticky some of these instructions here in the forums.   
    Instructional Video's and step by step detailed instructions for port forwarding
    How to enable BASIC Port Forwarding on the MI424WR Verizon FiOS Router (actiontec.com)
    How to Configure Advanced Port Forwarding on the MI424WR Verizon FiOS Router  (actiontec.com)
    PCWintech's guide to portforwarding for the actiontec MI424WR (Verizon Firmware)
    PCWintech's guide to portforwarding for the Westell 327w DSL Modem
    PortForward.com
    I put my vote in. 
    EDIT:  I Didn't realize you were asking for the port forwarding rules to the features, I should have read better.     But yes I agree with that too.   

  • How to set up User id and Password for Web services or authentication

    Hi ,
    I am new to web services . I have created a new Web service in SAP , and while creating Service defination , set the Authentication as LOW for server proxy .Then created End-point in SOAMANAGER with USREID/PWS requried .This WSDL i am planning to share with Third party to call from Java application.
    But my web service checks for authorization which needs to be set up to allow the user id and pws .
    So question is how do i pass my user id and pws as i do not see this WSDL with User id and pws option displayed for me when i test this using SOAP UI .I saw some of WSDL with tag "AuthHeader" with user id and pws tags in them .So how could i get them ?
    Or requirement is that my Third party should be able to access my Web service in PRD and also be able to have authorization to auth object embedded in FM inside service defination .So how is this acheived ?
    Thanks,
    Sitaraman

    Hi,
    After creation of WSDL , you will get URL lkie http://idessapdev.ad.infosys.com:8000/index.html.
    For this URL your third party system need sto add id and pwd for accessing like http://idessapdev.ad.infosys.com:8000/index.html&userid = 111&pwd= wwgw.
    this is not the exact syntax. you can check with your third party system for this URL.
    Regards,
    Lokeswari.

Maybe you are looking for