Bmpanel creates a black gap between my wallpaper and the panel

I am running Xcompmgr (as you can see by the window shadows) and PekWM. bmpanel is compiled with compositing support (0.9.x, couldn't get bmpanel2 to compile). But whenever I start bmpanel, my wallpaper moves up to make room and leaves a black space. This does not happen with simpler bmpanel themes that don't have pieces extending off the panel.
As you can see in the screenshot, I'm looking at a screenshot of someone else who has managed to get it working correctly. No clue how, though. The screenshot also contains the CLI feedback.
I'm setting the wallpaper with feh --bg-scale, do I need to use something else? Running feh again after bmpanel doesn't change anything.
Thanks!

Ranguvar wrote:
http://h.imagehost.org/t/0515/2009-08-0 … _scrot.jpg
I am running Xcompmgr (as you can see by the window shadows) and PekWM. bmpanel is compiled with compositing support (0.9.x, couldn't get bmpanel2 to compile). But whenever I start bmpanel, my wallpaper moves up to make room and leaves a black space. This does not happen with simpler bmpanel themes that don't have pieces extending off the panel.
As you can see in the screenshot, I'm looking at a screenshot of someone else who has managed to get it working correctly. No clue how, though. The screenshot also contains the CLI feedback.
I'm setting the wallpaper with feh --bg-scale, do I need to use something else? Running feh again after bmpanel doesn't change anything.
Thanks!
I hadte same issue, i wanted that bmpanel theme, and a trayer, but i couldnt use both, so i stoped using bmpanel, im hoping that they will be able to use compozing and have a trayer at the same time, then i will start using it again

Similar Messages

  • Charts: Gap between Vertical Axis and the chart area

    Friends,
    I have a really wierd issue and I am sure I am doing
    something wrong.
    I am trying to align 2 charts that are placed vertically. I
    want to align the left vertical axis and the gridlines within them.
    Aligning the left vertical axis is easy and done but aligning the
    grids is becoming challenging and I have already spent a few hours
    on this problem.
    Here is a wrong chart image ...
    Wrong
    chart image
    The line of the LineChart (in the top chart) is touching the
    left and right edges where as the bottom chart bars do not touch
    the left/right edges. Due to this the gridlines are not aligned.
    I had managed to solve this problem but I am not sure what
    part of the code solved the problem. Here is the right chart image:
    Right
    chart image
    In this chart, the line of the linechart (in the top chart)
    is not touching the left and right boundary hence the gridlines are
    alignd with each other.
    I wonder what property of the chart controls the series
    touching the left/right vertical axis or boundary. Your help is
    appreciated.
    Thanks

    here is some more information ...
    I started changing some of the properties of the chart which
    I mentioned is a RIGHT CHART and this is what I learnt ...
    It was a CartesianChart hence it was creating the gap
    between the left/right vertical axis and the actual chart area
    (refer to the right chart image).
    I changed it to a LineChart and it started behaving like the
    chart in the WRONG CHART image.
    Is there a solution to this problem?

  • Gap between stainless band and the glass

    Hi
    My new iPhone 4 has a gap between the stainless band and front glass. Where the headphone jack is. The gap is around 0.5 mm and I can stick a paper in there. Is this normal?
    I'm thinking of returning my iPhone and get a replacement if possible.

    I've pretty much got the same thing. All four corners of my back glass have the slightest of a gap. You can really only see it when held up to a bright light. I can only slip receipt paper in there. Regular paper is too thick. I've had the phone a little over a week now and it's a week 41 build. I've considered exchanging it (the home button also isn't quite flush) but everything works and nothing seems to glitch so I'm leery of getting one with a worse problem. I've still got a couple weeks to exchange for new so I'll see what happens. Far as the slight gap being normal, probably not, but many seem to have it. If it gets any bigger it's going back for sure.

  • That black blink between an animation and the menu it's leading into

    Is there any way in Encore to make the transition from a timeline to a menu seamless? It just looks kind of cheap to have a slick video into and then BA-BWINK a quick black screen before the main menu pops uf the
    FYI I'm using Encore CS5 (and the rest of the Master Suite, in case that opens up any options).

    How short that blip is varies with the player. Scripting is required to do the best job (and Encore does not allow scripting).
    The best way to avoid this is to make the intro video part of the motion background and use a loop point so it doesn't repeat.

  • MSOutlook HTML newsletter issues - large gaps between large images and small gaps...

    Please can you help me!
    Searched the web & found plently of advice but still getting formatting display issue when viewing HTML newsletter in MS Outlook.
    Fully aware on the basics regarding the multiple issues when creating HTML newsletters but this is driving me crazy.
    Apparently there is a image height limit within Outlook (can't find out what this is) so I have sliced my larger images into 5/6 parts which solves the display issue in Outlook.
    But the gaps between the slices are now being displayed as small blank spaces within Hotmail.
    I did use <br> between each slice as without caused the fixed 600px wide containing table to expand due to the slices stacking hoz.
    Also still getting small gaps (like <br> spaces) between all images in Outlook when displaying perfectly (no gaps) in a browser.
    This is my newsletter displaying correctly via a browser:
    http://eu.shorts.tv/site-admin/modules/mod_mail/SHORTSTV_DECEMBER_2012.htm
    Using Dreamweaver 4 (do have the latest version via Adobe Creative Cloud Membership but not on this system).
    Hope you can help
    Many thanks

    Many thanks David
    I also found this article which is currently sitting on my desk.
    Pdf would make perfect sense or even a url link to view via a browser but these guys need it contained within the email.
    Thanks again for your kind advice.
    Regards
    ShortsTV
    Date: Fri, 30 Nov 2012 18:05:08 -0700
    From: [email protected]
    To: [email protected]
    Subject: MSOutlook HTML newsletter issues - large gaps between large images and small gaps...
        Re: MSOutlook HTML newsletter issues - large gaps between large images and small gaps...
        created by David__B in Adobe Creative Cloud - View the full discussion
    Hey Shortstv, Not something I know much about, searched and found thishttp://robcubbon.com/create-html-email-newsletters-outlook/ Maybe create it as a PDF attachment instead? -Dave
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4888255#4888255
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4888255#4888255
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4888255#4888255. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Adobe Creative Cloud by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • On differences between JavaFX CSS and the w3c standard css

    This is a discussion topic which came to mind after reading comments in this thread Re: FXML, css and -fx-font-family
    Feel free to comment or share your thoughts on the topic.
    Note that these comments relate to the naming and semantic meanings of css tags, and not the syntax and parsing of css (as both w3c css and javaFX css seem to be equivalent in the later regard).
    You know, sometimes I find JavaFX's lack of certain css features refreshing. It is nice to have all, well, almost all, of the JavaFX CSS documented on one page. I think if you were to do the same thing for w3c css then it would end up with a much larger, more difficult to understand document and even what the contents of that document should be would probably be pretty controversial, in the same kind of way that the HTML5 specification ended up being. Microsoft contributed over 7000 tests to w3c just to cover only a subset of the css rules available in browsers today. The webkit project lists almost a thousand open CSS bugs: https://bugs.webkit.org/buglist.cgi?product=WebKit&component=CSS&resolution=---. So implementing even partial w3c CSS support is a complex project.
    When I first started using JavaFX CSS I found the differences to w3c CSS quite jarring, and it was hard to account for them. Now that I am used to JavaFX CSS, I don't have as much of an issue. The difference in names and semantics is going to be an impediment to designers working on JavaFX who are familar with w3c CSS - but the designers will quickly also discover that FXML is not HTML and Java is not JavaScript and JavaFX deployment is not HTML deployment. So, perhaps, in the larger picture, it is not as big a deal as it would seem. Still, one can't help think that any impediment to people easily picking up and adopting JavaFX is doing the technology a disservice.
    There are other advantages in having the JavaFX CSS in it's own namespace to w3c css, in that it can evolve seperately, it is not expected to be exactly the same because it has a different name, it is not expected to fully implement w3c css as browsers do because it's clearly a different thing by name, etc. There is even precedent for it in the use by mozilla of moz- CSS prefixes and webkit css properties http://css-infos.net/properties/webkit - the web as not as standard as a lot of people propose. JavaFX CSS is backing a JavaFX rendering engine and not an HTML rendering engine. It is quite remarkable that Oracle was able to build and make available a CSS model for JavaFX that feels as familar as it does to w3c css, as w3c css is targeted very strongly toward styling a completely different technology set (HTML markup and document object model).
    It would be useful to have a tool which translates w3c css to approximations of JavaFX css and vice versa, or the ability for JavaFX to have a mode (perhaps a boolean value when a stylesheet is loaded) to perform an automatic alias or mapping of w3c css to javafx (at least for the subset of w3c css which would make sense to automatically translate to JavaFX css). I haven't checked the JavaFX jira in detail, so perhaps a request for such support already exists - perhaps it is under the private http://javafx-jira.kenai.com/browse/RT-9272 jira.
    The JavaFX css model is really powerful and I have found really useful some of the additions that it adds above the baseline 2.1 css that is found consistently in browsers. With the upcoming Java CSS object model http://javafx-jira.kenai.com/browse/RT-17293, you will also get better programmatic access from Java.
    So, nice work on building and implementing this complex feature . . .

    Thanks for the feedback. Closing the gap between JavaFX CSS and W3C CSS will be an evolutionary process. It would be nice to use a standard's based stylesheet but there is not always a 1-1 mapping to JavaFX. But for those properties that can be mapped, it is something that should be supported. For example, we should be able to handle "font" or "-fx-font".
    I have made http://javafx-jira.kenai.com/browse/RT-9272 public.

  • What is the associatione between Star Wars and the WCUI Skin "New Hope

    Hi Guys,
       I am doing SAP CRM 7.0 through University SAP Alliance programme. Could you please anyone tell what is the answer for the following question
    What is the associatione between Star Wars and the WCUI Skin u201CNew Hopeu201D
    Thanks in advance
    Regards
    Saravanan.R

    Ok, I'll take a stab at it. Since you normally work with a single layer it probably is not as important. But it still can be important inder the right circumstances.
    Lets say you have a photo of a blue background with a green square and a blue circle. You want to move the two objects.
    Use the selection tools to select one of the objects, hit ctrl-j to make a copy of that section onto a new layer, then repeat for the second object.
    Now that each object is on it own layer, you are free to fill that original image with the background color
    Because the two objects are on their own layer and everything around that object is transparent, you can freely move the object around until it suites you.
    When you are done, if you wish you can flatten the layers again.
    Now this could have been done using the new layers button, but it creates an emty layer, so you have the extra step of copy and pasting the section to that new layer.
    Now image you work for a large company and you are doing a composite for a huge magizine that has over a hundred objects that your boss "says" are in the wrong location, and wants them moved asap as the magazine is printing by nightfall.
    By eliminating the extra copy/paste step with multiple layers the time saved can be huge.
    If you are creating new objects then duplication doesn't really make sense then so, each does have its place.
    Hopefully that sheds a bit of light and doesn't confuse things more. LOL.

  • Exact difference between System status and the user status

    Hi,
    Please tell me the exact difference between System status and the user status .
    how we customize the both in the system
    Thanks & Regards
    Prajith P
    Moderation: Locked. Please, try to find an answer first. See rules of engagement
    Edited by: Joaquin Fornas on Feb 23, 2012 11:14 AM

    Hi,
    As you mentioned there are 2 status can be maintained for documents like Equipment Master, Notification, Maintenance Order & other important business documents.
    In case, client feels that system status is not enough to capture the details of the object, then user status can be used.
    System statuses will be updated automatically based on business transactions which will be done on SAP.
    For example, once the equipment is created, System status would CRTD (Created). If you install the same to some superior equipment or FL, then status would be INST (Installed).
    If you keeping that equipment in Spare, then for that, you have to maintain separate User Status like AVLB (Available in Stock / Spare) so that through IH08, by using User status, you can the report which is available as spare.
    These user status as per the name, should be updated by the user manually.
    Regards,
    Maheswaran.

  • I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV?

    I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV? I have a MiniDisplay Port to VGA adapter, but there are two issues with it: The new display doesn't have a VGA port, and even if it did, I wouldn't want to have my mac constantly attached to the display by a cable. I was looking for a way to use the TV as a display without any wires. Is there some type of bluetooth setup I could use? Please let me know if you have any suggestions.

    As I wrote above, I think you should look into the Apple TV yourself. The best place to find information about what it can and can't do and to ask your own specific questions is probably in the Apple TV forum, here:
    https://discussions.apple.com/community/appletv/appletv

  • Data reconciliation between R/3 and the BW Systems

    How do we do data reconciliation between R/3 and the BW system for the following areas?
    Purchasing
    Controlling:
    Project System:
    COPA
    SD
    AP
    Trgards,
    Tony G

    Tony
    Have you looked these documents??
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/how%20to%20validate%20infocube%20data%20by%20comparing%20it%20with%20psa%20data
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7a5ee147-0501-0010-0a9d-f7abcba36b14
    Re: BW v. R/3 data reconciliation
    Hope this helps
    Thanks
    Sat

  • "USB device not recognized." "The connection between your device and the desktop could not be established. Please check your setup and try again." Tungsten E2, Outlook 2007

    Hi,
    I am running XP SP 2, on a Dell Vostro 1000, Palm OS Garnet v5.4.7 on a Tungsten E2. I have worked though issues relating to synchronization, Outlook 2007, Docs to Go, etc., in the past.  Thank you board members! 
    Once I worked thru all the initial problems, my Tungsten E2 was sync' ing beautifully to my laptop until a few days ago.  There have been no changes (I know of) to the configuration, but now I receive  "The connection between your device and the desktop could not be established.  Please check your setup and try again."  On the laptop I sometimes get  "USB device not recognized."  I am unclear why I get the PC message sometimes and not others.   
    I have tried the following: (not necc exactly in this order)
    Double checked Hot Sync Mgr settings: Local USB (ver. 6.0.1)
    Reset the Palm (multiple times)
    Rebooted the laptop  (multiple times before and after the Palm resets)
    Went to Support Libraries including http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=57,E=0000000001060189973,K=9550,Sxi=3,Case=Obj(3695...)
    and http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE?New,Kb=PalmSupportKB,ts=Palm_External2001,Case=obj(1409) 
    Followed the steps in "Start Here" found at  http://forums.palm.com/palm/board/message?board.id=windows_hotsync&thread.id=26057 
    Moved Backup directory as per a post on this forum
    Looked for a deleted a file called "Graffiti_ShortCuts_____________" per a post on this forum
    Followed the steps in HotSync troubleshooter guide you can run through located on
    http://kb.palm.com
    Went into Device Manager - found it shows no yellow ! 's
    Followed Device Mgr Troubleshooter - went all the way thru with no solution 
    Tried all four USB ports - the PC's bell-like tone does not sound when I disconnect or reconnect the Plam's cradle like it does when I conn/disconnect other USB devices -I think that is a clue.    ...? 
    Cleaned the Palm's contacts (and cradle's contacts with a old, dry toothbrush)
    Read all the posts under "USB device not recognized." 
    OK, I'm at a loss, can anyone help me?  Many thanks in advance! 
    ~Bob
    Post relates to: Tungsten E2

    Hello!
    Using a cradle with the Tungsten E2?  Tried bypassing the cradle and just use the hotsync cable?  Tried a different computer yet?  Somehow, the PC is having problems getting a signal from the device.  I assume you have the laptop charger plugged into the laptop during this?  Not going through a docking station or port-replicator.
    One crazy thing you can try is unplug the charger from your laptop, remove the battery from the laptop and leave it out for like 10mins and put it back in and reboot the laptop.  This should not cause side effects but still contact your OEM to make sure that nothing else is needed after leaving the battery out for extended period of time.  Keep me posted.
    Post relates to: Treo 650 (Unlocked GSM)

  • What's the difference between Java SDK and the Enterprise Edition?

    What's the difference between Java SDK and the Enterprise Edition? Are they both free?

    both r free but they are used in diffrent applications. sdk are used for simple apps that run on your computer while j2e (enterprise edition) are ment for large distributed computer systems that include servers and such. if you don't know the diffrence you probably wont need the the j2e, only the sdk.

  • Customise table inconsistency between ABAP Dictionary and the databas

    Hi all,
    I have encountered a problem where by, I was not able to activate a table due to inconsistency between ABAP Dictionary and the database.
    After I run the SE14--> Check Database object. It has show that there is a missing Unique Index(Primary Index) at the Database Level, but at ABAP Dictionary it is there.
    I have try to recreate the primary index at the Database level, but failed. Because one of the primary key field is been dropped from this table.
    So now, may I know how can I still make this table Active again?
    Is it save to folllow the following solution that I found on internet?
    Syntax error in SDCC, table inconsistency between ABAP Dictionary and the database, transport error 8 during the generation of ABAP Dictionary. When you call Transaction SDCC, a termination occurs due to a putative syntax error because a table is not known or active. When you check this with the ABAP dictionary (SE11), you notice, that the table is active or inactive, however it is not possible to activate it. The activation might terminate with the error message 'Inconsistency between ABAP Dictionary and database'. A check of the affected object also delivers this error.
    Solution
    Proceed as follows:
    Log on as user DDIC
    Call Transaction SE14
    Enter the affected table name and
    select EDIT
    In the following screen, choose Table -> Reconstruct
    Confirm the execution
    Call Transaction SE11
    Enter the affected table name
    Display
    Activate
    Thanks.
    CK

    I managed to solved this by
    Solution
    Proceed as follows:
    Log on as user DDIC
    Call Transaction SE14
    Enter the affected table name and
    select EDIT
    In the following screen, choose Table -> Reconstruct
    Confirm the execution
    Call Transaction SE11
    Enter the affected table name
    Display
    Activate
    Thanks.
    CK

  • Is there a way to Move files to the iCloud thus freeing up disk space on my Mac? Or does iCloud only sync (replicate) files between my Mac and the cloud?

    Is there a way to Move files to the iCloud thus freeing up disk space on my Mac? Or does iCloud only sync (replicate) files between my Mac and the cloud? I want to free up disk space on my Mac and assumed that the icloud would be a good way to do this, but having 'moved' 70Gb of files to the iCloud drive (I've upgraded to 200Gb storage) my Mac is still nearly full and I've realised that it seems to just Sync files just like dropbox.

    So, the big question is did the Apple guys confirm that this is how the new iCloud drive should be working?  I'm guessing, from your response, that this is indeed the case.  Are they going to fix this anytime soon?  I thought that this was a new function of the iCloud drive in Yosemite.
    I just want an online storage facility to back up my photo & music collections.  I did look at Dropbox as they have a good deal going with their Dropbox Pro, however this is still just a sync service where the Master files reside on your local disk drive - although I have read that there may be a way to work around this.  Still not ideal.

  • Relation between statistical document and the real document

    How do I get relation between statistical document and the real document.
    Actually I want to reverse the posted real document and then convert statistical document into real document.
    Problem is that I have the Main/Sub transaction of statistical document but not of real document. So how do i link both of them.

    Hello,
    LFA1 is just a master data table.
    To get the number of open items you refer table BSIK
    To get the number of cleared items, you refer table BSAK
    These two tables gives you the number of line items posted on vendors.
    Hope this is informative.
    Regards,
    Ravi

Maybe you are looking for