BMW pairs with RAZR, but no contacts after ICS update

Question

One of many problems since ICS update:
BMW pairs with RAZR via bluetooth, but cannot access contact list on phone.  I can manually dial and connect phone calls through car.
Dialog box on Phone asks to access BMW, I press OK, same dialog box appears...repeat ad infinitum.
I have deleted phone pairing, re-paired, soft reboot, re-paired...still no contact list appears on car's communications screen.
Had no problem with car/ phone pairing prior to ICS update.
Any suggestions?

Answer 1

Jim Have a Look at this Links and Maybe it can Help you get you Bluetooth Going: b33
https://forums.motorola.com/posts/ed7efd7b48
https://motorola-global-portal.custhelp.com/app/answers/prod_answer_detail/a_id/72007/p/30,6720,8112
How do I setup and use Bluetooth?
Your phone can connect to other devices wirelessly, using Stereo Bluetooth® technology Class 2, v4.0 LE + EDR  technology with several Bluetooth® Profiles.
Quick links
Instructions for Android 4.X (Ice Cream Sandwich) users
Turn on and connect to a Bluetooth device  
Reconnect devices
Disconnect devices  
Changing the phone name  
Supported Bluetooth Profiles
MotoSpeak FAQs and information   
Turn on and connect to a Bluetooth device
To turn on and connect a Bluetooth hands-free headset(s), car kit(s), or other Bluetooth devices:
On the Home screen, press the Menu key
Tap Settings
Tap Wireless & networks
Touch Bluetooth to turn it On
Touch Bluetooth settings
Touch Scan for devices (make sure your device is in pairing mode)
Your phone scans for available Bluetooth devices
Touch the Bluetooth device to select it
Type the PIN if needed (PIN is usually 0000 or 1234)
Touch the device name again to connect to it. (If it doesn't automatically)
Tip: If your device is not connecting to the Bluetooth accessory, it is recommended that you try to reset the Bluetooth device. Check your accessory user guide for reset details.
Reconnect devices
In order to automatically reconnect your phone with a paired device, simply turn on the device.To manually reconnect your phone with a paired device, touch the device name in the Bluetooth devices list.
Disconnect devices
In order to automatically disconnect your phone from a paired device, simply turn off the device.
To manually disconnect your phone from a paired device, touch the device name in the devices list, then press Menu> Disconnect.
Changing the phone nameThe phone name identifies your phone in a Bluetooth network. Default name is usually "Motorola Phone"
Make sure that you have turned Bluetooth on (See steps above)
On the Wireless & networks settings screen, touch Bluetooth settings > Device name
Enter the name for your phone in the dialog box, then touch OK
Supported Bluetooth ProfilesYour Motorola DROID RAZR uses Stereo Bluetooth® technology Class 2, v4.0 LE + EDR.The following Bluetooth profiles are supported:
A2DP,
AVRCP,
BIP,
BPP,
DUN,
FTP,
GAP,
GAVDP,
GOEP,
HFP,
HID,
HSP,
OPP,
PAN,
PBAP,
SPP
For Android 4.X (Ice Cream Sandwich) users.TURN BLUETOOTH POWER ON OR OFF
Touch Menu  > System settings, then touch the Bluetooth power switch to turn it  or .Note: To extend battery life, turn off Bluetooth power when not in use.CONNECT NEW BLUETOOTH DEVICES
Note: This feature requires an optional accessory.To connect with a new Bluetooth headset or other device, you need to pair with it. You only need to do this once for each device-to connect again, just turn on the device.
Make sure the Bluetooth device you are pairing with is in discoverable mode.Note: Refer to the guide that came with the Bluetooth device for details.
Touch Menu  > System settings > Bluetooth.
Touch the Bluetooth power switch to turn it  and scan. If Bluetooth power is already on, touchSEARCH FOR DEVICES.
Touch a device to connect.
If necessary, touch OK, or enter the device passkey (like 0000) to connect to the device. When the device is connected, the Bluetooth connected indicator  appears in the status bar.
Note: Using a mobile device or accessory while driving may cause distraction and may be illegal. Always obey the laws and drive safely.
RECONNECT DEVICES
To automatically reconnect your smartphone with a paired device, simply turn on the device.
To manually reconnect your smartphone with a paired device, touch the device name in the AVAILABLE DEVICES list.
DISCONNECT DEVICES
To automatically disconnect your smartphone from a paired device, simply turn off the device.
To manually disconnect your smartphone from a paired device, touch the device name in the devices list, then touchOK.
CHANGE DEVICE NAME
Touch Menu  > System settings > Bluetooth, turn Bluetooth power on, then touch Menu  > Rename phone. Enter a name and touch OK.