BO 4.0 : Link universe, contexts not included
Hello,
I'm trying to create a new universe "B" based on an existing universe "A". "A" has several contexts defined. When linking "A" to "B", all contexts are lost.
Is there any way to keep those contexts ?
Am-I doing this the wrong way ?
My "B" universe has to be read-only.
Thanks,
F.
Hi,
In fact Only the table schema, classes and objects of the core universe are available in the derived universe.
Contexts and Access Restrictions must be re-detected or re-added in the derived universe.
Regards,
Amine.
Similar Messages
-
Reports based on Linked Universes in BOXI 3.0 do not work
We have noticed that reports based on linked Universes do not work. We have imported our (BO) documents/Universes into the BOXI R2 environment, upgraded to BOXI 3.0 and now found this issue in InfoView which affects a lot of our reports, details as follows:
When refreshing a (Deski) report in InfoView, get a dialogue box titled "Refreshing Data" with no error message;
Click on OK, and it seems the report does not get refreshed;
Click on Refresh again, this time get prompt dialogue box;
Enter prompt, click on Run Query;
Get another dialogue box titled "Prompts" with message "SetPrompts failed - click on OK;
Click on a TAB in the report - get error message, title "Report" with message "The document instance is no longer available. Please reopen the document (Error:RFC 00421);
Click on OK it throws you out of the report and takes you back to the document list;
Try another report:
Click on Refresh Data;
Error message - title "Refreshing Data", message "Cannot load linked universes. (UNV0011) - click on OK;
Help !!!!Hello Dahya,
Please post this query to the [dedicated BusinessObjects Enterprise Administration|BI Platform; forum:
That forum is monitored by qualified technicians and you will get a faster response there.
Also, all BusinessObjects Enterprise Administration queries remain in one place and thus can be easily searched in one place.
Thanks a lot,
Falk -
When I tweet from my notification center on my iPad mini, the link to the content I'm tweeting about is not included. It only includes the title of the tweet. How do I fix that? Thanks.
The choice should appear as two tabs at the top - imap & pop.
Make sure you're choosing 'Other'.
This is a screen shot of what you should see: -
Search results do not include "sponsored links"
Hi Team,
Search results do not include "sponsored links" (delivered by sponsored links index) nor "related terms" (not sure where/how these are configured
Thanks
ChanduYou may also have to create an allow exception to keep this cookie.
In case you are using "Clear history when Firefox closes":
*do not clear the Cookies
*do not clear the Site Preferences
*Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
*https://support.mozilla.org/kb/Clear+Recent+History
Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.
Clearing cookies will remove all specified (selected) cookies including cookies with an allow exception. -
Latest debug releases for mactinosh (9.0.28.0) do not include Universal Binary version
latest debug releases for mactinosh (9.0.28.0) do not include
Universal Binary Release, the installers only have PPC binaries for
both the standalone projector and the debug plugin. Please, please
post the UB build of 9.0.28.0 debug!
Thanks!bump.
-
Hi,
Can we use linking universe in XIR3.1?If so, I have two different universes with different connections and different databases.In this case,can we link two universes ?
Both servers are sqlserver 2000
Regards
JugHi Jug,
I copy paste the note below.
The presentation is better on the page that I linked of course but at least you get the information
1348843 - Best Practice for Linking Universes in XIR2 and XI3.1
Symptom
What are the Best Practices for Linking Universes? I am trying to solve this formatting issue on the forum...
Environment
BusinessObjects Enterprise XIR2, XIR3.1
Cause
Linking Universes:
Within a universe it is possible to dynamically link to another universe.
When you link two universes, the primary active universe that is open has the role of derived universe and the universe that will be attached to it is referred to as the core universe.
Changes that are made in the attached core universe are automatically propagated to the derived universes.
The core universe can only be edited at its source and not in the derived universe.
Why Link?
If you have a number of universes and each contains the same set of objects it enables the reuse of objects.
Or you can opt for using the Include to copy all classes/objects and structure to a new universe. (Include becomes part of the new universe and is not dynamic)
Advantages of Linking:
Structure is created once and reused
Class and objects created once and reused
Maintenance on CORE only
Derived universes automatically updated
Disadvantages of Linking:
Only applicable to exported universes. (Not able to hide core universe in CMS)
Contexts must be recreated
Lovu2019s must be recreated
Connection must be to the same data source
One level of linking allowed
Why Include?
Advantages of Including:
Quick method of copying one universe into another
Maintain one universe rather than a number of smaller ones
Disadvantages of Including:
Only applicable to exported universes
Contexts must be recreated
No dynamic change if core universe is updated
Linking Requirements:
The core universe and derived universe use the same connection, data account, or Database and the same RDBMS.
Using the same connection for both the core and the derived universe makes managing the universes easier, but this can be changed at any time.
The core and derived universes must be in the same repository and the same domain.
The core universe and derived universe use the same data account, or database, and the same RDBMS. Using the same connection for both the core and the derived universe.
The core universe was exported and re-imported at least once. The derived universe does not need to have been exported before creating a link.
Exported derived universes are located in the same universe domain as the core universe.
You are authorized to link the given universe.
You cannot link to a universe that uses stored procedures.
You can use only one level of linking. You cannot create derived universes from a universe which is itself derived.
All classes and objects are unique in both the core universe and the derived universes. If not conflicts will occur.
Once the links are created there is very limited ability to move classes and dimensions.
The two universe structures must allow joins to be created between a table in one universe to a table in the other universe. If not, then Cartesian products can result when a query is run with objects from both structures.
Only the table schema, classes and objects of the core universe are available in the derived universe. Contexts and Access Restrictions must be re-detected or re-added in the derived universe.
Lists of values associated with a core universe are not saved when you export a derived universe with the core universe structures.
When multiple links are added the order of the links will appear reversed in the Class/Object Panel. For example, if universe A is first linked and then universe B the result will display in the class/objects panel as universe B then universe A.
Note: When you link universes, you can relocate the core universe within the same repository with out breaking the link. This allows you to export the core universe to a different repository folder, while keeping the links with derived universes valid.
The linking process must be completed by creating joins between the core tables and the derived universe tables. Delete all current contexts and re-detect the contexts for the new structure.
Note: You can not edit any structure, class, or object from the linked universe (core universe), within the derived universe.
Editing the Derived Universe:
Create joins between the core and derived universe structures. Creating joins ensures that Cartesian products are not returned for objects included in a query from both structures.
Remove existing contexts.
Detect aliases.
Detect contexts.
Hide or Create new objects as required.
Note: For information on hiding a component, refer to the section showing or hiding classes, objects and conditions Universe Designer Guide on page 308. -
Top link bar tab not highlighted when subsite beneath subsite active
Scenario: All sites in a site collection share the same top link bar for consistent global navigation.
Site A (top-level)
Site A1 (2nd level)
Site A1a (3rd level)
Site A2 (2nd level)
etc.
Problem: When site A1 is active, tab "A1" is highlighted. When site A1a is active, no tabs are highlighted. And the bread crumbs do not include site "A1." So the user has no context to where they are in the site taxonomy.
In MOSS 2007 the behavior is different. Tab "A1" is highlighted when site A1 or any of its subsites is active. So when site A1a is active, tab "A1" is highlighted and the user knows where they are. This is good.
Question: How can I make SharePoint 2010 highlight the top link bar tabs in a similar manner to MOSS 2007?I activated the "SharePoint Server Publishing Infrastructure" site collection feature, still it didn't work for me.
I have Custom Top navigation bar in my project.
Eg : AAA BBB CCC DDD
When i am into CCC site , if i create sites under this at three levels say. :
CCC > CC1 > CC2 > CC3 > CC4
The top navigation bar does not get highlighted when i am into CC4 site.
Actuly the top naviagtion bar should look like this :
Eg : AAA BBB CCC DDD
But it does not get highlighted and it shows normal like this . Eg :
AAA BBB CCC DDD
Please suggest some solution for the same. Why Navigation does not work at this level.
Regards ,
Avinash -
Do not include some lines in Subtotals and totals in ALV
Hello All,
I am printing a report with all sale order details and Quantities( delveered ,conformed etc..) iam doing subtotals based on the material and Plant.
In this if the document date is less than the SY-DATUM, we should not include the quantity into the subtotals and totals, Only the orders wiht doc date GQ to Sy-datum then display them..
As of now I am using ALV grid display and doing the sums by
l_wa_fcat-do_sum = c_x. (field catalog) for the whole colom) but i want to avoid sum row from tehe calculation based on the condition.
<b>Do we have any way to achive this, like if we want to have separate color for a purticular Cell then we add an extra field in outout table and we link this field with layout-coltab_fieldname in the same way or any other way if we have</b>.
I will be thankfull to if you can provide me your valuable suggesstions on this. it is very urgent. I am trying in all the ways from my side.Hi,
see this code,
Complete code for the ALV grid example
This example shows and ALV grid with flights. After selecting a line a change button can be pushed to display a change screen. After the changes have been saved, the ALV grid screen is displayed again, and the grid is updated with the changes.
The example shows:
How to setup the ALV grid
How to ste focus to the grid
How to set the title of the grid
How to allow a user to save and reuse a grid layout (Variant)
How to customize the ALV grid toolbar
Refresh the grid
Set and get row selection and read line contents
Make and exception field (Traffic light)
Coloring a line
Steps:
Create screen 100 with the ALV grid. Remember to include an exit button
Add a change button to the ALV grid toolbar
Create screen 200 the Change screen
The screens:
The code:
REPORT sapmz_hf_alv_grid .
Type pool for icons - used in the toolbar
TYPE-POOLS: icon.
TABLES: zsflight.
To allow the declaration of o_event_receiver before the
lcl_event_receiver class is defined, decale it as deferred in the
start of the program
CLASS lcl_event_receiver DEFINITION DEFERRED.
G L O B A L I N T E R N A L T A B L E S
*DATA: gi_sflight TYPE STANDARD TABLE OF sflight.
To include a traffic light and/or color a line the structure of the
table must include fields for the traffic light and/or the color
TYPES: BEGIN OF st_sflight.
INCLUDE STRUCTURE zsflight.
Field for traffic light
TYPES: traffic_light TYPE c.
Field for line color
types: line_color(4) type c.
TYPES: END OF st_sflight.
TYPES: tt_sflight TYPE STANDARD TABLE OF st_sflight.
DATA: gi_sflight TYPE tt_sflight.
G L O B A L D A T A
DATA: ok_code LIKE sy-ucomm,
Work area for internal table
g_wa_sflight TYPE st_sflight,
ALV control: Layout structure
gs_layout TYPE lvc_s_layo.
Declare reference variables to the ALV grid and the container
DATA:
go_grid TYPE REF TO cl_gui_alv_grid,
go_custom_container TYPE REF TO cl_gui_custom_container,
o_event_receiver TYPE REF TO lcl_event_receiver.
DATA:
Work area for screen 200
g_screen200 LIKE zsflight.
Data for storing information about selected rows in the grid
DATA:
Internal table
gi_index_rows TYPE lvc_t_row,
Information about 1 row
g_selected_row LIKE lvc_s_row.
C L A S S E S
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
METHODS:
handle_toolbar FOR EVENT toolbar OF cl_gui_alv_grid
IMPORTING
e_object e_interactive,
handle_user_command FOR EVENT user_command OF cl_gui_alv_grid
IMPORTING e_ucomm.
ENDCLASS.
CLASS lcl_event_receiver IMPLEMENTATION
CLASS lcl_event_receiver IMPLEMENTATION.
METHOD handle_toolbar.
Event handler method for event toolbar.
CONSTANTS:
Constants for button type
c_button_normal TYPE i VALUE 0,
c_menu_and_default_button TYPE i VALUE 1,
c_menu TYPE i VALUE 2,
c_separator TYPE i VALUE 3,
c_radio_button TYPE i VALUE 4,
c_checkbox TYPE i VALUE 5,
c_menu_entry TYPE i VALUE 6.
DATA:
ls_toolbar TYPE stb_button.
Append seperator to the normal toolbar
CLEAR ls_toolbar.
MOVE c_separator TO ls_toolbar-butn_type..
APPEND ls_toolbar TO e_object->mt_toolbar.
Append a new button that to the toolbar. Use E_OBJECT of
event toolbar. E_OBJECT is of type CL_ALV_EVENT_TOOLBAR_SET.
This class has one attribute MT_TOOLBAR which is of table type
TTB_BUTTON. The structure is STB_BUTTON
CLEAR ls_toolbar.
MOVE 'CHANGE' TO ls_toolbar-function.
MOVE icon_change TO ls_toolbar-icon.
MOVE 'Change flight' TO ls_toolbar-quickinfo.
MOVE 'Change' TO ls_toolbar-text.
MOVE ' ' TO ls_toolbar-disabled.
APPEND ls_toolbar TO e_object->mt_toolbar.
ENDMETHOD.
METHOD handle_user_command.
Handle own functions defined in the toolbar
CASE e_ucomm.
WHEN 'CHANGE'.
PERFORM change_flight.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMETHOD.
ENDCLASS.
S T A R T - O F - S E L E C T I O N.
START-OF-SELECTION.
SET SCREEN '100'.
*& Module USER_COMMAND_0100 INPUT
MODULE user_command_0100 INPUT.
CASE ok_code.
WHEN 'EXIT'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module STATUS_0100 OUTPUT
MODULE status_0100 OUTPUT.
DATA:
For parameter IS_VARIANT that is sued to set up options for storing
the grid layout as a variant in method set_table_for_first_display
l_layout TYPE disvariant,
Utillity field
l_lines TYPE i.
After returning from screen 200 the line that was selected before
going to screen 200, should be selected again. The table gi_index_rows
was the output table from the GET_SELECTED_ROWS method in form
CHANGE_FLIGHT
DESCRIBE TABLE gi_index_rows LINES l_lines.
IF l_lines > 0.
CALL METHOD go_grid->set_selected_rows
EXPORTING
it_index_rows = gi_index_rows.
CALL METHOD cl_gui_cfw=>flush.
REFRESH gi_index_rows.
ENDIF.
Read data and create objects
IF go_custom_container IS INITIAL.
Read data from datbase table
PERFORM get_data.
Create objects for container and ALV grid
CREATE OBJECT go_custom_container
EXPORTING container_name = 'ALV_CONTAINER'.
CREATE OBJECT go_grid
EXPORTING
i_parent = go_custom_container.
Create object for event_receiver class
and set handlers
CREATE OBJECT o_event_receiver.
SET HANDLER o_event_receiver->handle_user_command FOR go_grid.
SET HANDLER o_event_receiver->handle_toolbar FOR go_grid.
Layout (Variant) for ALV grid
l_layout-report = sy-repid. "Layout fo report
Setup the grid layout using a variable of structure lvc_s_layo
Set grid title
gs_layout-grid_title = 'Flights'.
Selection mode - Single row without buttons
(This is the default mode
gs_layout-sel_mode = 'B'.
Name of the exception field (Traffic light field) and the color
field + set the exception and color field of the table
gs_layout-excp_fname = 'TRAFFIC_LIGHT'.
gs_layout-info_fname = 'LINE_COLOR'.
LOOP AT gi_sflight INTO g_wa_sflight.
IF g_wa_sflight-paymentsum < 100000.
Value of traffic light field
g_wa_sflight-traffic_light = '1'.
Value of color field:
C = Color, 6=Color 1=Intesified on, 0: Inverse display off
g_wa_sflight-line_color = 'C610'.
ELSEIF g_wa_sflight-paymentsum => 100000 AND
g_wa_sflight-paymentsum < 1000000.
g_wa_sflight-traffic_light = '2'.
ELSE.
g_wa_sflight-traffic_light = '3'.
ENDIF.
MODIFY gi_sflight FROM g_wa_sflight.
ENDLOOP.
Grid setup for first display
CALL METHOD go_grid->set_table_for_first_display
EXPORTING i_structure_name = 'SFLIGHT'
is_variant = l_layout
i_save = 'A'
is_layout = gs_layout
CHANGING it_outtab = gi_sflight.
*-- End of grid setup -
Raise event toolbar to show the modified toolbar
CALL METHOD go_grid->set_toolbar_interactive.
Set focus to the grid. This is not necessary in this
example as there is only one control on the screen
CALL METHOD cl_gui_control=>set_focus EXPORTING control = go_grid.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0200 INPUT
MODULE user_command_0200 INPUT.
CASE ok_code.
WHEN 'EXIT200'.
LEAVE TO SCREEN 100.
WHEN'SAVE'.
PERFORM save_changes.
ENDCASE.
ENDMODULE. " USER_COMMAND_0200 INPUT
*& Form get_data
FORM get_data.
Read data from table SFLIGHT
SELECT *
FROM zsflight
INTO TABLE gi_sflight.
ENDFORM. " load_data_into_grid
*& Form change_flight
Reads the contents of the selected row in the grid, ans transfers
the data to screen 200, where it can be changed and saved.
FORM change_flight.
DATA:l_lines TYPE i.
REFRESH gi_index_rows.
CLEAR g_selected_row.
Read index of selected rows
CALL METHOD go_grid->get_selected_rows
IMPORTING
et_index_rows = gi_index_rows.
Check if any row are selected at all. If not
table gi_index_rows will be empty
DESCRIBE TABLE gi_index_rows LINES l_lines.
IF l_lines = 0.
CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT'
EXPORTING
textline1 = 'You must choose a line'.
EXIT.
ENDIF.
Read indexes of selected rows. In this example only one
row can be selected as we are using gs_layout-sel_mode = 'B',
so it is only ncessary to read the first entry in
table gi_index_rows
LOOP AT gi_index_rows INTO g_selected_row.
IF sy-tabix = 1.
READ TABLE gi_sflight INDEX g_selected_row-index INTO g_wa_sflight.
ENDIF.
ENDLOOP.
Transfer data from the selected row to screenm 200 and show
screen 200
CLEAR g_screen200.
MOVE-CORRESPONDING g_wa_sflight TO g_screen200.
LEAVE TO SCREEN '200'.
ENDFORM. " change_flight
*& Form save_changes
Changes made in screen 200 are written to the datbase table
zsflight, and to the grid table gi_sflight, and the grid is
updated with method refresh_table_display to display the changes
FORM save_changes.
DATA: l_traffic_light TYPE c.
Update traffic light field
Update database table
MODIFY zsflight FROM g_screen200.
Update grid table , traffic light field and color field.
Note that it is necessary to use structure g_wa_sflight
for the update, as the screen structure does not have a
traffic light field
MOVE-CORRESPONDING g_screen200 TO g_wa_sflight.
IF g_wa_sflight-paymentsum < 100000.
g_wa_sflight-traffic_light = '1'.
C = Color, 6=Color 1=Intesified on, 0: Inverse display off
g_wa_sflight-line_color = 'C610'.
ELSEIF g_wa_sflight-paymentsum => 100000 AND
g_wa_sflight-paymentsum < 1000000.
g_wa_sflight-traffic_light = '2'.
clear g_wa_sflight-line_color.
ELSE.
g_wa_sflight-traffic_light = '3'.
clear g_wa_sflight-line_color.
ENDIF.
MODIFY gi_sflight INDEX g_selected_row-index FROM g_wa_sflight.
Refresh grid
CALL METHOD go_grid->refresh_table_display.
CALL METHOD cl_gui_cfw=>flush.
LEAVE TO SCREEN '100'.
ENDFORM. " save_changes -
Error while extending controller: class name is wrong or not included
Hi All,
I am getting this error while I port my extended controller class to the custom top and assign this controller to the page. I have made sure its the class file that is copied. The directory is correct, the permissions were given using chmod 775. There exists a soft link betwen the custom top and the oracle top as well. What else am I missing here?
Error: oracle.apps.fnd.framework.OAException: Could not create Java class: (oracle.apps.ap.oie.entry.webui.XXEntryFlowPageCO) associated with region: (GeneralInformationPG). This is probably because the class name is wrong or not included in project.:( Started out with that Gyan. If i do give the path with xx. appended to it, it lets me save and when i log back in and there are no changes to the page. I go to the personalise option to find the modification has been overwritten. I was told that this is so because Oracle doesnt recognise the xx.path and since there exists a soft link already the standard path with the new controller name should work.
i have really tried both of these options and am not sure what could be wrong. thanks for all your attempts to help. anything else i can try? -
Link functions are not working correctly
I am have a number of links on my page and I am using the a;link, a:hover and a:visited commands but I am getting strange results. First of all my css is on a separate style sheet. What I am trying to do is have all my links in gray text both when before and after being visited and I want the text to change to red and underline when I hover over the link. My results are that in live view the links all seem to work ok except for my HOME link at the bottom of the page where it does not change color and does not underline. When I view in browser the results are worse. None of the links change when I hover over them excepts for the DOWNLOAD link. Also note that I have 4 columns of unordered lists about the footer which also does not work either. Here is the source and css code. Thanks for your help.
Dan
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<meta name="description" content="HOME PAGE for company which provides chemical process equipment, diaphragm pumps, plastic tanks, pH/ORP controls, mixers, filtration equipment, flowmeters"
<title>Chemtech Process Equipment</title>
<style type="text/css">
</style>
<link href="CSS/Chemtech.css" rel="stylesheet" type="text/css" />
<link rel="stylesheet" href="CSS/verticalmenu.css" type="text/css" />
<link rel="stylesheet" href="CSS/horizontalmenu.css" type="text/css" />
</head>
<body>
<div id="container">
<div id="header"><img src="Images/header.jpg" alt="header" width="960" height="310" border="0" usemap="#logomap" />
<map name="logomap" id="logomap">
<area shape="rect" coords="3,5,265,123" href="index.html" alt="Chemtech Process Equipment" />
</map>
</div>
<div id="navigation_bar"><div class="AJXMenuULDYZCC"><!-- AJXFILE:CSS/horizontalmenu.css -->
<div class="ajxmw1">
<div class="ajxmw2">
<ul>
<li><a href="index.html" title="Home"><b> HOME </b></a></li>
<li><a class="ajxsub" href="productsbytype.html" title="Products"><b> PRODUCTS </b>
<!--[if gt IE 6]><![endif] --></a><!--<![endif]--><!--[if lte IE 6]><table><tr><td><![endif]-->
<ul>
<li><a href="productsbytype.html" title="Indexed by Type"><b>Indexed by Type</b></a></li>
<li><a href="productsbymfgr.html" title="Indexed by Manufacturer"><b>Indexed by Manufacturer</b></a></li>
</ul>
<!--[if lte IE 6]></td></tr></table></a><![endif]-->
</li>
<li><a href="#" title="Request Quote"><b>REQUEST QUOTE</b></a></li>
<li><a href="#"><b>DOWNLOADS</b></a></li>
<li><a href="contact%20us.html" title="Contact Us"><b> CONTACT US </b></a></li>
</ul>
</div>
</div>
<br />
</div></div>
<div id="sidebar"><div class="AJXMenuEHWBGHC"><!-- AJXFILE:CSS/verticalmenu.css -->
<ul>
<li><h1><b>PROCESS EQUIPMENT</b></h1></li>
<li><a class="ajxsub" href="#" title="Pumps"><b>Pumps</b>
<!--[if gt IE 6]><![endif] --></a><!--<![endif]--><!--[if lte IE 6]><table><tr><td><![endif]-->
<ul>
<li><a href="#" title="Air Diaphragm"><b>Air Diaphragm</b></a></li>
<li><a href="#" title="Centrifugal"><b>Centrifugal</b></a></li>
<li><a href="#" title="Drum"><b>Drum</b></a></li>
<li><a href="#" title="Gear"><b>Gear</b></a></li>
<li><a href="#" title="Hose"><b>Hose</b></a></li>
<li><a href="#" title="Magnetic Drive"><b>Magnetic Drive</b></a></li>
<li><a href="#" title="Metering"><b>Metering</b></a></li>
<li><a href="#" title="Peristaltic"><b>Peristaltic</b></a></li>
<li><a href="#" title="Piston"><b>Piston</b></a></li>
<li><a href="#" title="Vertical"><b>Vertical</b></a></li>
</ul>
<!--[if lte IE 6]></td></tr></table></a><![endif]-->
</li>
<li><a class="ajxsub" href="#" title="Mixers"><b>Mixers</b>
<!--[if gt IE 6]><![endif] --></a><!--<![endif]--><!--[if lte IE 6]><table><tr><td><![endif]-->
<ul>
<li><a href="#" title="Direct Drive"><b>Direct Drive</b></a></li>
<li><a href="#" title="Gear Drive"><b>Gear Drive</b></a></li>
<li><a href="#" title="C-Clamp Mount"><b>C-Clamp Mount</b></a></li>
<li><a href="#" title="Drum Mount"><b>Drum Mount</b></a></li>
<li><a href="#" title="Fixed Top Mount"><b>Fixed Top Mount</b></a></li>
<li><a href="#" title="Side Mount"><b>Side Mount</b></a></li>
</ul>
<!--[if lte IE 6]></td></tr></table></a><![endif]-->
</li>
<li><a class="ajxsub" href="#" title="Filters"><b>Filters</b>
<!--[if gt IE 6]><![endif] --></a><!--<![endif]--><!--[if lte IE 6]><table><tr><td><![endif]-->
<ul>
<li><a href="#" title="Bag"><b>Bag</b></a></li>
<li><a href="#" title="Cartridge"><b>Cartridge</b></a></li>
<li><a href="#" title="Centrifuge"><b>Centrifuge</b></a></li>
<li><a class="ajxsub" href="#" title="Indexing Media"><b>Indexing Media</b>
<!--[if gt IE 6]><![endif] --></a><!--<![endif]--><!--[if lte IE 6]><table><tr><td><![endif]-->
<ul>
<li><a href="#" title="Gravity FIlter"><b>Gravity Filter</b></a></li>
<li><a href="#" title="Vacuum FIlter"><b>Vacuum FIlter</b></a></li>
<li><a href="#" title="Sludge Filter"><b>Sludge FIlter</b></a></li>
<li><a href="#" title="Pressure Filter"><b>Pressure Filter</b></a></li>
<li><a href="#" title="Sludge Filter"><b>Sludge Filter</b></a></li>
</ul>
<!--[if lte IE 6]></td></tr></table></a><![endif]-->
</li>
<li><a href="#" title="Oil Skimmers"><b>Oil Skimmers</b></a></li>
<li><a href="#" title="Oil-Water Separators"><b>Oil-Water Separators</b></a></li>
</ul>
<!--[if lte IE 6]></td></tr></table></a><![endif]-->
</li>
<li><a class="ajxsub" href="#" title="Tanks"><b>Tanks</b>
<!--[if gt IE 6]><![endif] --></a><!--<![endif]--><!--[if lte IE 6]><table><tr><td><![endif]-->
<ul>
<li><a href="#" title="Carboys & Totes"><b>Carboys & Totes</b></a></li>
<li><a href="#" title="Rectangular"><b>Rectangular </b></a></li>
<li><a href="#" title="Cylindrical Cone Bottom"><b>Cylindrical Cone Bottom</b></a></li>
<li><a href="#" title="Cylindrical Flat Bottom"><b>Cylindrical Flat Bottom</b></a></li>
<li><a href="#" title="Vertical Bulk Storage"><b>Vertical Bulk Storage</b></a></li>
</ul>
<!--[if lte IE 6]></td></tr></table></a><![endif]-->
</li>
<li><a class="ajxsub" href="#" title="Piping/Hose"><b>Piping / Hose</b>
<!--[if gt IE 6]><![endif] --></a><!--<![endif]--><!--[if lte IE 6]><table><tr><td><![endif]-->
<ul>
<li><a href="#" title="PVC Pipe & Fittings"><b>PVC Pipe & Fittings</b></a></li>
<li><a href="#" title="CPVC Pipe & Fittings"><b>CPVC Pipe & Fittings</b></a></li>
<li><a href="#" title="Polypro Pipe & Fittings"><b>Polypro Pipe & Fittings</b></a></li>
<li><a href="#" title="PE Pipe & Fittings"><b>PE Pipe & Fittings</b></a></li>
<li><a href="#" title="Kynar Pipe & Fittings"><b>Kynar Pipe & Fittings</b></a></li>
<li><a href="#" title="Sanitary Hose, Gaskets & Fittings"><b>Sanitary Hose, Gaskets & Fittings</b></a></li>
</ul>
<!--[if lte IE 6]></td></tr></table></a><![endif]-->
</li>
<li><a class="ajxsub" href="#" title="Immersion Heaters"><b>Immersion Heaters</b>
<!--[if gt IE 6]><![endif] --></a><!--<![endif]--><!--[if lte IE 6]><table><tr><td><![endif]-->
<ul>
<li><a href="#" title="Electric Immersion"><b>Electric Immersion</b></a></li>
<li><a href="#" title="Steam Coil"><b>Steam Coil</b></a></li>
</ul>
<!--[if lte IE 6]></td></tr></table></a><![endif]-->
</li>
<li><a class="ajxsub" href="#" title="Process Controls"><b>Process Controls</b>
<!--[if gt IE 6]><![endif] --></a><!--<![endif]--><!--[if lte IE 6]><table><tr><td><![endif]-->
<ul>
<li><a href="#" title="pH & ORP Probes"><b>pH & ORP Probes</b></a></li>
<li><a href="#" title="Conductivity Probes"><b>Conductivity Probes</b></a></li>
<li><a href="#" title="Flowmeters"><b>Flowmeters</b></a></li>
<li><a href="#" title="Level Sensors"><b>Level Sensors</b></a></li>
<li><a href="#" title="Pressure Transducers"><b>Pressure Transducers</b></a></li>
<li><a href="#" title="Process Controllers"><b>Process Controllers</b></a></li>
<li><a href="#" title="VFD's"><b>VFD's</b></a></li>
<li><a href="#" title="Power Monitors"><b>Power Monitors</b></a></li>
</ul>
<!--[if lte IE 6]></td></tr></table></a><![endif]-->
</li>
<li><h1><b>ENGINEERED SYSTEMS</b></h1></li>
<li><a href="#" title="Chemical Feed Skids"><b>Chemical Feed Skids</b></a></li>
<li><a class="ajxsub" href="#" title="Evaporators"><b>Evaporators</b>
<!--[if gt IE 6]><![endif] --></a><!--<![endif]--><!--[if lte IE 6]><table><tr><td><![endif]-->
<ul>
<li><a href="#" title="Burt Process Equipment"><b>Burt Process Equipment</b></a></li>
<li><a href="#" title="Filtertech"><b>Filtertech</b></a></li>
</ul>
<!--[if lte IE 6]></td></tr></table></a><![endif]-->
</li>
<li><a href="#" title="Filtration Systems"><b>Filtration Systems</b></a></li>
<li><a href="#" title="Fume Scrubbers"><b>Fume Scrubbers</b></a></li>
<li><a href="#" title="pH Neutralization"><b>pH Neutralization</b></a></li>
<li><a href="#" title="RODI Water Systems"><b>RODI Water Systerms</b></a></li>
<li><a href="#" title="Transfer Sumps"><b>Transfer Sumps</b></a></li>
<li><a href="#" title="UL Control Panels"><b>UL Control Panels</b></a></li>
<li><a href="#" title="Vacuum Distillation"><b>Vacuum Distillation</b></a></li>
<li><a class="ajxsub" href="#" title="Wastewater Treatment"><b>Wastewater Treatment</b>
<!--[if gt IE 6]><![endif] --></a><!--<![endif]--><!--[if lte IE 6]><table><tr><td><![endif]-->
<ul>
<li><a href="#" title="Burt Process Equipment"><b>Burt Process Equipment</b></a></li>
<li><a href="#" title="Filtertech"><b>Filtertech</b></a></li>
</ul>
<!--[if lte IE 6]></td></tr></table></a><![endif]-->
</li>
<li><a href="#" title="Water Reclaim (LEEDS)"><b>Water Reclaim (LEEDS)</b></a></li>
</ul>
<br />
</div>
</div>
<h1>Engineered Solutions to your fluid handing requirements.<img src="Images/aro-pump-ad.jpg" alt="aro pump ad" width="200" height="200" hspace="10" vspace="15" align="right" /></h1>
<p>Chemtech Process Equipment (CPE) provides fluid handling equipment to a wide range of industries which include pharmaceutical, biotechnology, microelectronics, metal finishing, chemical processing and general manufacturing.</p>
<p>CPE offers turnkey engineered products such as transfer sumps, wastewater treatment, coolant filration, oil-water separation, water reclamation (LEEDS), pH neutralization, deionized water (RODI), and custom fabricated tanks and vessels.</p>
<p>CPE’s product line includes pumps, tanks, mixers, filters, evaporators, magnetic separators, centrifuges, oil skimmers, flowmeters, level, pH, ORP, and conductivity measurement, heaters, plastic pipe, valves and fittings, sanitary hose, and gaskets to name a few. Feel free to review our product line and contact us if you have any questions or applications to discuss.</p>
<h2>Products<br /></h2>
<hr align="left" width="740" />
<br />
<div class="floatlist">
<ul>
<li><a href="">Air Diaphragm Pumps</a></li>
<li><a href="">Cenrifugal Pumps</a></li>
<li><a href="">Drum Pumps</a></li>
<li><a href="">Gear Pumps</a></li>
<li><a href="">Hose Pumps</a></li>
<li><a href="">Magnetic Drive Pumps</a></li>
<li><a href="">Metering Pumps</a></li>
<li><a href="">Multi-Stage Centrifugal Pumps</a></li>
<li><a href="">Peristaltic Pumps</a></li>
<li><a href="">Piston Pumps</a></li>
<li><a href="">Submersible Pumps</a></li>
<li><a href="">Vertical Immersion Pumps</a></li>
</ul>
</div>
<div class="floatlist">
<ul>
<li><a href="">Custom Engineered Tanks</a></li>
<li><a href="">Molded Plastic Tanks</a></li>
<li><a href="">Direct Drive Mixers</a></li>
<li><a href="">Gear Drive Mixers</a></li>
<li><a href="">Portable Mixers</a></li>
<li><a href="">Side Mount Mixers</a></li>
<li><a href="">Conductivity Probes</a></li>
<li><a href="">Flowmeters</a></li>
<li><a href="">Level Sensors</a></li>
<li><a href="">pH & ORP Probes</a></li>
<li><a href="">Power Monitors</a></li>
<li><a href="">Pressure Transducers</a></li>
</ul>
</div>
<div class="floatlist">
<ul>
<li><a href="">Process Controllers</a></li>
<li><a href="">Ultrasonic Level Transmitters</a></li>
<li><a href="">Variable Frequency Drives</a></li>
<li><a href="">Sanitary Hose, Gaskets & Fittings</a></li>
<li><a href="">PVC Pipe, Valves & Fittings</a></li>
<li><a href="">CPVC Pipe, Valves & Fittings</a></li>
<li><a href="">Polypro Pipe, Valves & Fittings</a></li>
<li><a href="">Polyethylene High Purity Piping</a></li>
<li><a href="">Immersion Heaters</a></li>
<li><a href="">Magnetic Separators</a></li>
<li><a href="">Centrifuges</a></li>
<li><a href="">Evaporators</a></li>
</ul>
</div>
<div class="floatlist">
<ul>
<li><a href="">Bag Filters</a></li>
<li><a href="">Cartridge Filters</a></li>
<li><a href="">Indexing Media Filters</a></li>
<li><a href="">Gravity Filters</a></li>
<li><a href="">Pressure Filters</a></li>
<li><a href="">Sludge Filters</a></li>
<li><a href="">Vacuum Filters</a></li>
<li><a href="">Filter Bags</a></li>
<li><a href="">Filters Cartridges</a></li>
<li><a href="">Filter Media</a></li>
<li><a href="">Pulsation Dampeners</a></li>
<li><a href="">Fiberglass Grating</a></li>
</ul>
</div>
<div id="footer">
<ul>
<li><a href="index.html">HOME</a></li>
<li><a href="productsbytype.html">PRODUCTS</a></li>
<li><a href="requestquote.html">REQUEST QUOTE</a></li>
<li><a href="downloads.html">DOWNLOADS</a></li>
<li><a href="contact us.html">CONTACT US</a></li>
</ul>
<hr align="center" width="940" id="footer rule2" />
<h4>© 2011 Chemtech Process Equipment, All Rights Reserved, Designed and Developed By Graphics Advantage. <img src="Images/GA-logo.jpg" width="46" height="40" align="top" /><br /><br /></h4>
</div>
</div>
</body>
</html>
@charset "utf-8";
body {
background-image: url(../Images/logo-background.jpg);
background-repeat: repeat;
background-attachment: fixed;
#container {
font-family: Arial, Helvetica, sans-serif;
font-size: 14px;
color: #000;
background-color: #FFF;
width: 960px;
margin-right: auto;
margin-left: auto;
overflow: hidden;
background-attachment: fixed;
#container p {
padding-right: 20px;
#header {
width: 960px;
height: 310px;
#headernarrow {
height: 150px;
width: 960px;
#navigation_bar {
height: 31px;
width: 960px;
#sidebar {
float: left;
width: auto;
margin-right: 20px;
#footer {
text-align: center;
width: 960px;
float: left;
#footer ul li {
display: inline;
#footer ul li a {
padding-right: 10px;
padding-left: 10px;
a:link {
color:#666;
text-decoration:none;
a:hover {
color:#F00;
text-decoration:underline;
a:visited {
color:#666;
text-decoration:none;
.floatlist {
font-family: Arial, Helvetica, sans-serif;
font-size: 10px;
color: #F00;
float: left;
height: auto;
width: 190px;
.floatproductlist {
font-family: Arial, Helvetica, sans-serif;
float: left;
height: auto;
font-size: 14px;
font-style: normal;
color: #000;
width: 380px;
h4 {
font-size: 10px;
font-family: Arial, Helvetica, sans-serif;
h1 {
font-family: Arial, Helvetica, sans-serif;
font-size: 24px;
font-weight: bold;
color: #F00;
ul {
list-style-type: none;
padding: 0px;
margin-top: 0px;
margin-right: 0px;
margin-bottom: 0px;
margin-left: 1em;
display: block;
.largeheading {
font-family: Arial, Helvetica, sans-serif;
font-size: 48px;
color: #F00;
.floatimageleft {
float: left;
width: 250px;
margin-right: 20px;
height: auto;
margin-top: 10px;
background-image: url(../Images/aro-compact-series-float.jpg);
background-repeat: no-repeat;
margin-bottom: 20px;When you use the link pseudclass in your css it has to be expressed in the correct order.
LoVe HAte
Link
Visited
Hover
Active
It doesn't matter that you have not expressed all four but the three that you have still need to be that way.
Anyway, try it, we have nothing to lose!
Martin -
Links to safari not working properly -- safari doesn't display page on top
I just did the latest upgrade.. but notice that if I choose a link from within an email - it opens safari - but the safari page is hidden by the email screen.. the safari page is not viewable without choosing it from the "window" menu item. At first I thought the links from email were not opening safari at all -- then realized that the safari page does open --but it does not come to the forefront of my screen - as it used to...
I called applecare and they recommended re-installing the update directly from their site - apparently a lot of issues with updating from the software update via apple menu. So I did - and have the same problem. my husband has it also on his macbook.
I discovered that it's tied to the "space preference". If I turn the space preferences completely off -- my links from email do open up correctly in safari. If I turn the preference on (not including mail as an application" - the problem resurfaces Which is that when I click on a link in an email - the page does not appear in the forefront in safari.... it gets "hidden" behind whatever page safari is displaying
Has no one else had this issue but me (and my husband). I don't really use the space preference anymore -- but this is definitely a new issue on my laptop. -
A few months ago, I purchased a new iMac. I recently created a movie using iMovie. Then I found out that iDVD is not included. So I have the problem that I want to burn a movie that I can play on my DVD player and watch on a television. I rang Applecare and was told that I need a program called BURN.
Is this correct? I can export the movie from iMovie in a m4v format, but I think I need to convert this to iso format before I can burn the disc.
I know there are programs like TOAST that will do this, but it is expensive.
I would be very grateful for any assistance.Burn will not do what you want, and there is no real substutute for iDVD.
Why is there no iDVD on my new Mac?
Apple insists that the entire world has access to fast broadband (and are prepared to pay for the considerable bandwidth usage) and wants to distribute home movies to friends and relatives via download (iCloud, YouTube, Facebook, whatever) rather than mailing them a DVD. The fact that in reality not all users do, has so far had no effect on this policy. If you scream and shout loudly enough down the phone Apple may send you a free copy of iDVD. Stating that they would return their brand new Mac unless they received a copy of iDVD worked for some, but that is now said to have been withdrawn by Apple.
Also, you can complain bitterly via Apple’s Feedback link, perhaps suggesting that Apple could have provided a choice between burning DVDs and distributing home movies by other means. You may feel that Apple should not dictate how you destribute family videos or photos to distant relatives and friends, and should not assume that every user is prepared to pay for the excessive bandwidth usage charged by ISPs for huge downloads from the App Store:
http://www.apple.com/feedback/
Whilst Macs with a Superdrive continue to be able to burn video DVDs, the software for so doing, iDVD, is no longer included in the iLife bundle that came with OS 10.7 Lion (which also omitted iWeb) or that comes with OS 10.8 Mountain Lion. And it is no longer included in the iLife 11 from the online Apple Store: http://www.apple.com/ilife/. Your only solution is to look on Amazon or eBay and try to get an older version that includes iDVD 7, i.e. iLife version 9 onwards. You should also do this if you plan to buy a new Mac anytime soon, as stocks of iLife that include iDVD will not be available for ever.
However, the vastly more expensive FCPX can burn a DVD without iDVD or DVD Studio Pro involvement, but lack the themes etc of iDVD. Also, of course, there is Roxio Toast, which is the best software for burning anything but again does not offer the flexibility of iDVD.
And if you think Microsoft are any better, their new Windows 8 operating system will not play DVDs, or burn them, unless customers buy an extra upgrade, the company has announced: http://www.gizmag.com/windows-8-no-dvd-playback/22443/
In other words, computer manufacturers have declared optical media as dead, long before consumers are ready to stop using them, which is fine as long as they offered us a choice, but they won’t even do that. Flexibility and intuitive use of a computer seems to be a thing of the past. -
Hello Guys,
I am using a Cisco 2951 with 15.3(3)M1, and when doing some tests with CoA i got the following error:
*Nov 7 10:34:24.780: COA: 1.1.1.1 request queued
*Nov 7 10:34:24.780: RADIUS: authenticator 52 CF BB 58 BB D5 69 4E - 59 3B 09 75 E9 83 54 4C
*Nov 7 10:34:24.780: RADIUS: User-Name [1] 2 ""
*Nov 7 10:34:24.780: RADIUS: Acct-Session-Id [44] 10 "0000002B"
*Nov 7 10:34:24.780: RADIUS: Vendor, Cisco [26] 42
*Nov 7 10:34:24.780: RADIUS: Cisco AVpair [1] 36 "subscriber:command=reauthenticate "
*Nov 7 10:34:24.780: RADIUS: Message-Authenticato[80] 18
*Nov 7 10:34:24.780: RADIUS: B6 78 8B EA DE 3B 73 26 57 53 C0 E7 47 89 2C 6D [ x;s&WSG,m]
*Nov 7 10:34:24.780: COA: Message Authenticator decode passed
*Nov 7 10:34:24.780: ++++++ CoA Attribute List ++++++
*Nov 7 10:34:24.780: 01EEAF6C 0 00000081 username(450) 0
*Nov 7 10:34:24.780: 01EEB7EC 0 00000001 session-id(408) 4 43(2B)
*Nov 7 10:34:24.780: 01EEB820 0 00000081 ssg-command-code(490) 1 32
*Nov 7 10:34:24.780:
*Nov 7 10:34:24.780: ++++++ Received CoA response Attribute List ++++++
*Nov 7 10:34:24.780: 01EEB7EC 0 00000082 reply-message(273) 16 No valid Session
*Nov 7 10:34:24.780: 01EEB820 0 00000002 error-cause(272) 4 Session Context Not Found
This is very strange, because the session-id is correct.
Can anyone advice me on this? Thanks!
DavidHello Manuel,
Thanks for all your help. Here is the show output
LNS#show subscriber session uid 47 detailed internal
Subscriber session handle: EC00005E, state: connected, service: Local Term
Unique Session ID: 47
Identifier: [email protected]
SIP subscriber access type(s): VPDN/PPP
Root SIP Handle: 5300005D, PID: 313
Child SIP Handle: 7900002F, PID: 318
Current SIP options: Req Fwding/Req Fwded
Session Up-time: 19:52:55, Last Changed: 19:52:55
Switch handle: 211E
Interface: Virtual-Access2.2
Policy information:
Context 10EC39C0: Handle 7B00002F
AAA_id 0000003B: Flow_handle 0
Authentication status: authen
Policy internals:
Policy state : wait-for-events
Authorization type : AAA service
Active key : apply-config-only
Authorization active key : Auth-User
Last top level rule type : session-service-found
Client : SM
Last message from client : Apply Config Success
Last message to client : Apply Config Success
Current key list from client :
Identifier: Auth-Domain = "xxx.xx"
Identifier: Protocol-Type = 0 (PPP Access Protocol)
Identifier: Session-Handle = 3959423070 (EC00005E)
Identifier: Tunnel-Name = "LNS"
Identifier: Media-Type = 2 (IP)
Identifier: Input Interface = "GigabitEthernet0/1.2000"
Identifier: AAA-Acct-Enbl = 1 (YES)
Identifier: Authen-Status = 0 (Authenticated)
Identifier: Nasport = Vty Terminal: port 47 IP 69.17.193.90
Identifier: Auth-User = "[email protected]"
Network plumbing done yet : Yes
Network plumbing directive proposed : None
AIE handle : 2B00002F
AIE user ID : 47
AAA user ID : 0000003B/59
Authorization index : 0
Authorization priority : 1
Context : 7B00002F
North handle : 00000000
North callback : 00000000
South handle : EC00005E
South callback : 06B898A8
Current access-type : PPP
All access-types : [0] VPDN
: [1] PPP
No more keys available from : PPP
Session activated : Yes
Session inbound features:
Feature: QoS Policy Map
Input Policy Map: INTERNET-15Mb-IN
Session outbound features:
Feature: QoS Policy Map
Output Policy Map: INTERNET-15Mb-OUT
Configuration sources associated with this session:
Interface: Virtual-Template1, Active Time = 19:52:55
Pending status associated with this session:
Bind status: Success, Delay delete: No, Pending mask: 0
And the debug output for a reauthenticate command
*Nov 8 10:21:58.367: RADIUS: COA received from id 1 x.x.x.x:60590, CoA Request, len 108
*Nov 8 10:21:58.367: COA: x.x.x.x request queued
*Nov 8 10:21:58.367: RADIUS: authenticator 1D 92 FF 04 43 EA 0E 11 - DE 49 2F AE 81 46 42 78
*Nov 8 10:21:58.367: RADIUS: User-Name [1] 18 [email protected]
*Nov 8 10:21:58.367: RADIUS: Acct-Session-Id [44] 10 "0000003B"
*Nov 8 10:21:58.367: RADIUS: Vendor, Cisco [26] 42
*Nov 8 10:21:58.367: RADIUS: Cisco AVpair [1] 36 "subscriber:command=reauthenticate "
*Nov 8 10:21:58.367: RADIUS: Message-Authenticato[80] 18
*Nov 8 10:21:58.367: RADIUS: 7F CA 0A 96 A7 4C 5F 05 57 33 4D 36 D6 7A 37 7E [ L_W3M6z7~]
*Nov 8 10:21:58.367: COA: Message Authenticator decode passed
*Nov 8 10:21:58.367: ++++++ CoA Attribute List ++++++
*Nov 8 10:21:58.367: 01FCE77C 0 00000081 username(450) 16 [email protected]
*Nov 8 10:21:58.367: 01FCFBAC 0 00000001 session-id(408) 4 59(3B)
*Nov 8 10:21:58.367: 01FCFBE0 0 00000081 ssg-command-code(490) 1 32
*Nov 8 10:21:58.367:
*Nov 8 10:21:58.367: RADIUS/ENCODE(00000000):Orig. component type = Invalid
*Nov 8 10:21:58.367: RADIUS(00000000): sending
*Nov 8 10:21:58.367: RADIUS(00000000): Send CoA Nack Response to 69.17.193.4:60590 id 1, len 62
*Nov 8 10:21:58.367: RADIUS: authenticator A3 EC 85 01 C3 31 E2 B3 - 25 22 38 79 DA 8E 95 46
*Nov 8 10:21:58.367: RADIUS: Reply-Message [18] 18
*Nov 8 10:21:58.367: RADIUS: 4E 6F 20 76 61 6C 69 64 20 53 65 73 73 69 6F 6E [ No valid Session]
*Nov 8 10:21:58.367: RADIUS: Dynamic-Author-Error[101] 6 Session Context Not Found [503]
*Nov 8 10:21:58.367: RADIUS: Message-Authenticato[80] 18
*Nov 8 10:21:58.367: RADIUS: AC 83 2A 7C DE 7D 78 8E B7 91 C9 F0 16 8B 86 D2 [ *|}x]
Even the PoA is not working
*Nov 8 10:24:04.022: RADIUS: POD received from id 4 x.x.x.x:57061, POD Request, len 66
*Nov 8 10:24:04.022: POD: 69.17.193.4 request queued
*Nov 8 10:24:04.022: ++++++ POD Attribute List ++++++
*Nov 8 10:24:04.022: 01FCFBAC 0 00000081 username(450) 16
[email protected]
*Nov 8 10:24:04.022: 01FCE77C 0 00000001 session-id(408) 4 59(3B)
*Nov 8 10:24:04.022: 01FCE7B0 0 00000081 Message-Authenticator(274) 16 20 2C D0 32 B2 B7 70 BC CE 0F 57 30 8A 0B 52 B7
*Nov 8 10:24:04.022:
*Nov 8 10:24:04.022: RADIUS/ENCODE(00000000):Orig. component type = Invalid
*Nov 8 10:24:04.022: RADIUS(00000000): sending
*Nov 8 10:24:04.022: RADIUS(00000000): Send Disconnect Nack Response to x.x.x.x:57061 id 4, len 44
*Nov 8 10:24:04.022: RADIUS: authenticator 86 6C A4 7E EC E6 D8 DA - 30 03 38 E7 51 03 78 86
*Nov 8 10:24:04.022: RADIUS: Reply-Message [18] 18
*Nov 8 10:24:04.022: RADIUS: 4E 6F 20 76 61 6C 69 64 20 53 65 73 73 69 6F 6E [ No valid Session]
*Nov 8 10:24:04.022: RADIUS: Dynamic-Author-Error[101] 6 Session Context Not Found [503] *Nov 8 10:24:04.022: RADIUS: POD received from id 4 x.x.x.x:57061, POD Request, len 66
*Nov 8 10:24:04.022: POD: x.x.x.x request queued
*Nov 8 10:24:04.022: ++++++ POD Attribute List ++++++
*Nov 8 10:24:04.022: 01FCFBAC 0 00000081 username(450) 16 [email protected]
*Nov 8 10:24:04.022: 01FCE77C 0 00000001 session-id(408) 4 59(3B)
*Nov 8 10:24:04.022: 01FCE7B0 0 00000081 Message-Authenticator(274) 16 20 2C D0 32 B2 B7 70 BC CE 0F 57 30 8A 0B 52 B7
*Nov 8 10:24:04.022:
*Nov 8 10:24:04.022: RADIUS/ENCODE(00000000):Orig. component type = Invalid
*Nov 8 10:24:04.022: RADIUS(00000000): sending
*Nov 8 10:24:04.022: RADIUS(00000000): Send Disconnect Nack Response to x.x.x.x:57061 id 4, len 44
*Nov 8 10:24:04.022: RADIUS: authenticator 86 6C A4 7E EC E6 D8 DA - 30 03 38 E7 51 03 78 86
*Nov 8 10:24:04.022: RADIUS: Reply-Message [18] 18
*Nov 8 10:24:04.022: RADIUS: 4E 6F 20 76 61 6C 69 64 20 53 65 73 73 69 6F 6E [ No valid Session]
*Nov 8 10:24:04.022: RADIUS: Dynamic-Author-Error[101] 6 Session Context Not Found [503]
Thanks!!
David -
A JE created from the AP Invoice does not include the project # on all trx
A JE created from the AP Invoice does not
include the project # for the amounts entered in the freight box. To
duplicate, do the following:
1. Open an AP Invoice
2. Enter BP Code
3. Select Service type
4. Enter a Project Code in drop down box on Accounting tab
5. Enter a line in the Contents; specify GL Account, amount and Tax
Code Open Freight box
6. Enter an amount in one of the lines
7. Click ADD
8. Go back to the invoice and go to the Accounting tab Click on the GL
journal note and you can see that the line corresponding to the
contents line has a project, but the line corresponding to the Freight
box item does not.
My customer users these projects when printing GL agings and the
information is very important. Shouldn't this information be carried
forward on all transactions on the Journal entry? Is there a way to get this information to post?Hi Pat,
the project code (PC) on the marketing document may only be applied to the business partner (BP), hence the only row in the associated journal entry (JE) with this project code is that of the BP.
You can link project codes to specific accounts (CoA -> select account -> account details -> project code) & this project code will then be assigned every time the account is found in a JE.
If you require the project code to be applied to the freight, you may assign this project code to the account you have defined for this freight. The drawback is naturally that the project code will then be pulled every time this freight is used, regardless of whether or not the PC is associated with the BP or not.
It is possible to manually assign project codes to every row in a journal entry, hence this should also be possible with SDK. You might explore the possibility whether it might be possible to automatically assign the BP PC to all rows in the JE using a script.
All the best,
Kerstin -
Create biar file with command line for link universe
Hi
I am using boxi 3.1 and I am trying to create 2 biar files with the command line
One file for " main" universe and it's reports and another is for a link universe and it's reports
The problem that on "main " biar file that been created , the link universe and it's reports also appear in it. Even so in the queries only the relevant objects are selected
I try to remove from the properties file the parameter 'exportDependencies=true ', and then when I check the xml of the biar I so that the link universe and it's report no longer appear. But when I importing the file I receive the error message 'Required dependencies not found on target system : '[ARgp0DCiBRBOsL3EHYQaHBY, AdfkNagAE59Nsbazh40nwTU]'
Does anyone have an idea what I need to do , in order to see in the main biar bust the main objects?I have done it before on BOXI R2 with the IW, and it works fine
But any how, this is the way that we have to work with, since it is part of a customer product and the link universe and it's reports is an additional part of the product.
So is there a way that I can pull just the main universe and it's reports?
Maybe you are looking for
-
How can i make a soft return with pages shift enter does not work!
how can i make a soft return with pages shift plus enter does not work!!
-
Master Detail in an Accordian - Spry
I am trying to use multiple datasets (1 to populate each accordian tab) and those data to be used to populate 1 detail region. The accordian tabs work, but the detail region does not seem to pull the data and populate correctly. Below is the code, an
-
Compatibility problem copying between Microsoft Office, Clipboard, Internet
I would really appreciate your help figuring out a problem: I have run Microsoft Office 2004 on my iBook G4 for the past 5 years. Just recently, whenever I attempt to copy anything from Word, it comes up in the clipboard and the destination in an ema
-
itunes.exe.-corrupt file error. Told to run the chkdsk utlity. Anyone know what this is??
-
I try to open itunes from the desktop and It says that my library is locked
ya thats my problem