BO 4.0 Web Intelligence, Error: Column Chart shows not the whole data

Hello,
I want to create a case study in BusinessObjetcs 4.0 (Web Intelligence) with a column chart.
Year is the Category Axis and Revenue is the Value Axis.
Unfortunately the resulting chart shows only the year 2008.
If I choose Month as Regional Color the chart shows all years (2008-2011).
What I do wrong? Or is this a bug?
Thank you!
Best regards,
Wladimir

Hi again,
What I think is that there simply isn't data in the report other than the 2008,
or at least the combination of the section master/year only has 2008 data.
If that is not what you expect and there should be more data, also when looking specifically at the values for just this section,
then you could check if you may be have incomplete query results. Standard they will be limited to 5000 rows, unless your universe designer decides otherwise.
Check the number of rows returned (free cell with query details),
if it is 5000 (or any other nice round figure) have a chat with the universe designer.
Good luck,
Marianne

Similar Messages

Bind Web Service to Column Chart

in Flex 3, can someone send me a sample of how to Bind Web Service to Column Chart?
I am new to Flex and I am missing how to make this work
Below is the XML that I am getting from the Web Service
<items>
    <item>
          <Artist>John Smith</Artist>
          <Actual>13.7</Actual>
          <Estimated>8.0</Estimated>
    </item>
</items>
Send link or files to [email protected]
Thank you in advance to anyone that is willing to help me here

Hi,
you can build a wrapper bean that decorates the call to the proxy class. This way only your bean is exposed to the client
Frank

Missing column in the column chart - is it the selector's fault?

Hi folks, thanks for bearing with me here:
I'm working on fixing some issues on a dashboard that someone else has set up (and there's no way for me to reach that person). One of those issues is that one of the columns in a column chart does not display on the dashboard when exported. The column chart is pulling the data from the correct cells, so the problem doesn't seem to stem from there.
I thought I got to the bottom of it when going over the scorecard. The range used for its source data cuts off before it reaches the data for the column in the chart that doesn't show up in the exported dashboard. However, when I adjust the range for the source data the resulting exported dashboard turns out an entirely blank column chart (even weirder, changing the source data back doesn't seem to fix this; I had to simply start back from my prior save state to reverse the blank chart).
So am I even on the right track here? And if not, any ideas on what's keeping that column from showing up?

Thanks Ameet, I tried out the table as you said and the data for the column and the vertical progress bar were missing from there as well.
It turns out I was correct about the scorecard's source data being to blame, and that adjusting it to include the fields in the spreadsheet that correspond to the missing graphics was the right course of action, the problem was something with my computer; I sent the file to another computer and adjusted the source data there, and it worked fine.
It puzzles me why the edits wouldn't take on my computer (after being exported). The only thing is maybe I need a newer version of Flash, but I have 9.0 r45 which should be enough.
Edited by: xcelsiusnoob on Jun 23, 2011 2:16 AM

I want to de-install mac-excel test version and get the error message: you have not the privileges to de-install. Please login with the Mac-OS account you have installed mac-excel originally'. I don't know this account anymore. I am sysadm

I want to de-install mac-excel test version and get the error message: 'You have not the privileges to de-install. Please login with the Mac-OS account you have installed mac-excel originally'. I don't know this account anymore. Possibly it does not exist anymore. anybody out there who can help ?

Hi, I may suggest to activate the root account and try the uninstall process from that account. To do so, you have to:
Go to System Preferences a open up the Users pane;
On the left side of the pane, you shuold see Login Options;
Enabled editing option clicking on the lock (it will ask your password);
Once the pane is enabled, you should see something like Server Account Network (sorry my OS is in italian, so I don't exactly know the right translation), and right next to it a button;
Click on that button, and a new pane shows up. Click on Open Directory Utility, and on the upper bar of OS X click on Edit;
Select Enable Root Account (you can set a password, or not);
Done that, you should log out and when the login window show up, type on the user field "root" and the password you choose;
Theorically, from this account you will be able to unistall the application.
After completing your task, I reccomend you to disable the root account, just by loggin in your personal account and repeating the steps I described before. Hope it helps

Why am i getting this error? they are not the same?

1021: Duplicate function definition.
1021: Duplicate function definition.
stop();
import flash.events.MouseEvent;
// home button definition \\
// Portfolio button definition \\
Portfolio_btn.addEventListener(MouseEvent.CLICK, pClick);
function pClick(event:MouseEvent):void{
    gotoAndStop("getPortfolio");
// Contact Me button defintion \\
Contact_btn.addEventListener(MouseEvent.CLICK, cClick);
function cClick(event:MouseEvent):void{
    gotoAndPlay("contactme");
why am i getting this error the functions have different names... idk what to do they are for two different buttons I am using action script 3.0

i did what u said and it said these two lines were the same
// Portfolio button definition \\
Portfolio_btn.addEventListener(MouseEvent.CLICK, pClick);
function pClick(event:MouseEvent):void{                                                         <--------this one
    gotoAndStop("getPortfolio");
// Contact Me button defintion \\
Contact_btn.addEventListener(MouseEvent.CLICK, cClick);
function cClick(event:MouseEvent):void{                                                           <--------and this one
    gotoAndPlay("contactme");
it gave me the same error but they are not the same

I purchased an unlocked iPhone4 last month. Everything was fine till yesterday. Today morning when I tried to check mail, i suddenly got an error message saying " Could not activate cellular data network: you are not subscribed to a cellular data service"

I purchased an unlocked iPhone4 last month. Everything was fine till yesterday. Today morning when I tried to check mail, i suddenly got an error message saying " Could not activate cellular data network: you are not subscribed to a cellular data service", when I checked on my network settings i was not able to find the cellular data network tab ( where we use to input APN manually). i even tried to restore my iPhone to its factory settings, Still it remains the same. i cant able to connect to Internet using cellular data. help me...Plz..

Where did you purchase it from? There are lots of iPhones sold as "unlocked" which are carrier locked phones that were hacked and are not officially unlocked. These phones are subject to re-locking to the original carrier, particularly when updated.

IWocountered an error while attempting to create the attachment data.

Hi I have created an invoice on pages,then saved it.
When i click on share to send document via email as a PDF file this message comes up "IWORK ENCOUNTERED AN ERROR WHILE ATTEMPTING TO CREATE THE ATTACHMENT DATA" can anybody help it very frustrating,i recently wiped my mac book pro and since i put iwork back on it hasnt worked.
Thanks Tasha

Pages 5 has a complex and unique file bundle format. Designed to make it impossible to extract any contents when the inevitable goes wrong.
GMail, Amazon, Dropbox etc (almost any non-Apple Server software) just don't understand them.
Send the files via Apple Mail.
Peter

Chart Web Part - Stacked Column Chart and the Y Field

I am trying to create a stacked chart in Sharepoint.
I am encountering a problem at the "Bind Chart to Data" Step. Retrieval of Data goes without a hitch - all rows and columns are captured and shown, but then when it comes to adding series, the "Y Field" drop down menu only shows one of
my columns. So of course, the final chart only has one data series visible - a normal column chart instead of a stacked one.
What could be the cause of this, and how do I fix it?

Yes, that's right. That is exactly what I want to do.
But, the problem I'm facing is that when it comes time to select the second series settings as:
The second Series settings:
Series Name: Oranges
Series Type: StackedColumn
Series X-Axis Type: Primary
Series Y-Axis Type: Primary
X Field: Day
Specifically >>>>Y Field: Oranges
The Y-field option which appears as
a drop-down menu on the page, does NOT show the option "Oranges". It shows only "Apples" again, and also a blank setting (selecting this also does not cause desired graph to get created).
I want to know HOW to be able to select "Oranges" as the Y-field because I am unable to do so!

SSRS report viewer web part error only in IE not in Chrome & Safari

SSRS is setup in SP integrated mode.
I am getting this error when I click a report parameter drop down for the second time to display the list of avaliable values:
Sys.WebForms.PageRequestManagerParserErrorException: The message received from the server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response
filters, HttpModules, or server trace is enabled. Details: Error parsing near '< !DOCTYPE html PUB'.
I researched this issue and have added the following to my SP site's web.config:
<appSettings>
<add key="aspnet: MaxHttpCollectionKeys" value="5000" />
</appSettings>
Oddly enough, I only get this error in IE not in Chrome it works fine... Any ideas on how to correct?
fyi- Drop down has <25 items I would say.

Hi,
According to your post, my understanding is that you had some issues about the SSRS.
As you had known, this issue is caused that Microsoft security update MS11-100 limits the maximum number of form keys, files, and JSON members to 1000 in an HTTP request.
Because of this change, ASP.NET applications reject requests that have more than 1000 of these elements.
HTTP clients that make these kinds of requests will be denied, and an error message will appear in the web browser.
SSRS report filtering column were sending as HTTPCollectionKeys and that was reaching the maximum limit.
The solution is adding the MaxHttpCollectionKeys as you had did, you can try add a larger number to check whether it works, such as 9999 as below.
<appSettings>

<add key="aspnet:MaxHttpCollectionKeys" value="9999" />
</appSettings>
http://blogs.msdn.com/b/paulking/archive/2012/01/16/using-an-http-module-to-assist-in-adjusting-the-value-of-aspnet-maxhttpcollectionkeys-imposed-by-ms11-100.aspx
As this issue is related to the SSRS, you can post the issue to the SSRS forum.
http://social.technet.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices
More experts will assist you, then you will get more information relation to SSRS.
Thank you for your understanding and support.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

Web Deploy error - "This method is not supported by this class"

I have an MVC project which I am trying to deploy to one of our internally-hosted web front end servers via a TFS build process. Our server hosts the MS Deploy service, and other solutions deploy without problems to the same box. The parameters for the build
process are as follows:
/p:DeployOnBuild=True /p:DeployTarget=MsDeployPublish /p:MSDeployPublishMethod=WMSVC /p:MsDeployServiceUrl=https://<server>:8172/msdeploy.axd /p:DeployIISAppPath="<internal.site.com>" /p:username=<username> /p:password=<password>
/p:IncludeIisSettingsOnPublish=false /p:AllowUntrustedCertificate=True /p:OutputPath=bin\ /p:SkipExtraFilesOnServer=True /p:VisualStudioVersion=11.0
The error message I receive at the point the build reaches the deployment activity is:
Web deployment task failed. (Could not complete the request to remote agent URL 'https://<server>:8172/msdeploy.axd?site=<internal.site.com>'.)
Could not complete the request to remote agent URL 'https://<server>:8172/msdeploy.axd?site=<internal.site.com>'.
The request was aborted: The request was canceled.
This method is not supported by this class.
We've found
this StackOverflow post which describes the same error we're experiencing, however the suggested solution is something we already do in our server configuration, so this doesn't resolve the issue for us.
Has anyone seen this error before, or is able to make any suggestions why it is happening?

Hi Matt,
You have to have a look in the build log then copy the command that is under Run MSBuild node and executed it on the build agent.
You should find something like below:
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\MSBuild.exe /nologo /noconsolelogger "C:\Builds\....sln" /nr:False /fl /flp:"logfile=C:\Builds\...log;encoding=Unicode;verbosity=normal" /p:SkipInvalidConfigurations=true /p:CreatePackageOnPublish=true /p:DeployOnBuild=true /p:SkipExtraFilesOnServer=True /m /p:OutDir="C:\Builds\...\bin\\" /p:Configuration="DEV" /p:Platform="Any CPU" /p:VCBuildOverride="C:\Builds\....sln.Any CPU.DEV.vsprops" /dl:WorkflowCentralLogger,"C:\Program Files\Microsoft Team Foundation Server 12.0\Tools\Microsoft.TeamFoundation.Build.Server.Logger.dll";"Verbosity=Normal;BuildUri=vstfs:///Build/Build/31630;IgnoreDuplicateProjects=False;InformationNodeId=14;TargetsNotLogged=GetNativeManifest,GetCopyToOutputDirectoryItems,GetTargetPath;LogProjectNodes=True;LogWarnings=True;TFSUrl=http://...-tfs:8080/tfs/...;"*WorkflowForwardingLogger,"C:\Program Files\Microsoft Team Foundation Server 12.0\Tools\Microsoft.TeamFoundation.Build.Server.Logger.dll";"Verbosity=Normal;" /p:BuildId="aa2d3857-27e9-4854-b44f-4ca625ccd786,vstfs:///Build/Build/31630" /p:BuildLabel="..._2015.02.27.2" /p:BuildTimestamp="Fri, 27 Feb 2015 11:16:41 GMT" /p:BuildDefinition="..."
Daniel

In web intelligence rich client, I want not to display "#multivalue"

HI, experts, I have one question.
Is there any function to eliminate #multivalue?
like ISERROR which can be used in xcelsius...
Thanks.

Hi,
this forum is for the SAP Integration. I would suggest you post Web INtelligence questions into the Web Intelligence forum.
a MultiValue in Web Intelligence indicates that the measures are aggregates along "multiple values" for dimensions and it is something you can configure in the report itself in the properties for the table.
ingo

Testing ABAP Web dynpro: Error code 403 and for the reason Forbidden

Hi,
We have NW04s Installed and trying to execute a SAP supplied ABAP web dynpro application DEMO_SIMPLE_MAIN. Please see the following error and let us know which service it's talking about? I am familiar with SICF. However in AS7.0( New name for WEB AS ) The transaction is little different.
Thanks
Arunava
However we are getting the following service error
Service cannot be reached
What has happened?
URL http://server.domain.name.com:8001/sap/bc/webdynpro/sap/demo_simple_main call was terminated because the corresponding service is not available.
Note
The termination occurred in system XXX with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:NAME999_XXX_01-v:0-s:403-r:Forbidden
HTTP 403 - Forbidden
Your SAP Internet Communication Framework Team

Hi,
this was actually some services which needed to be started through SICF. Once I have started the service sap/bc/public ETC.. and the web dynpro started working. Most of the SAP delivered demo apps are working
However for some ABAP web dynpro ( for some application XRPM ) I get some peculiar error. Please see below and if you could think of anything out of these.
I have already checked and found the both HTTP and SMTP services are working fine.
The following error text was processed in the system PXA : Syntax error in program /1BCWDY/56ZRPAZLU25M8S1BKV2T==CP .
The error occurred on the application server fmsap994_PXA_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: CONSTRUCTOR of program CL_WDR_CLIENT_COMPONENT=======CP
Method: CONSTRUCTOR of program CL_WDR_CLIENT_APPLICATION=====CP
Method: CREATE_APPLICATION of program CL_WDR_CLIENT_APPLICATION=====CP
Method: EXECUTE of program CL_WDR_MAIN_TASK==============CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP

AD CS Web Enrollment Error - "public key does not meet the minimum size required"

I've installed a standalone root CA and a enterprise subordinate CA in our environment - both are Windows 2008 R2. Everything is working except for Web Enrollment using a custom User template. I duplicated the default User template and choose
2003 Compatible for the new one. I changed the minimum key length to 2048 and set the validity period to 2 years.
We'd like to avoid using the Advanced Certificate Request page, so I modified certrqtp.inc to point to the new template:
Else
' Request types for enterprise
rgAvailReqTypes(0,FIELD_TEMPLATE)="User-custom"
rgAvailReqTypes(0,FIELD_FRIENDLYNAME)=L_UserTemplateCert_Text
rgAvailReqTypes(0,FIELD_CSPLIST)="Microsoft Enhanced Cryptographic Provider v1.0?Microsoft Base Cryptographic Provider v1.0"
rgAvailReqTypes(0,FIELD_CSPLIST2)="Microsoft Base Cryptographic Provider v1.0?Microsoft Enhanced Cryptographic Provider v1.0"
rgAvailReqTypes(0,FIELD_EXPORTABLE)="True"
nAvailReqTypes=1
End If
I also ran into this issue where Web Enrollment jumps straight to the Advanced page if the original User template isn't present on the CA:
http://social.technet.microsoft.com/Forums/en/winserversecurity/thread/9ab514bc-1f9f-424e-b70d-705874d9c623
So I have both User templates loaded on the CA, and I get this error back when attempting a certificate request using IE 8 or 9:
Your certificate request was denied.
Your Request Id is 25. The disposition message is "Denied by Policy Module".
Contact your administrator for further information.
Looking at the CA's Failed Requests section, I see this error:
The public key does not meet the minimum size required by the specified certificate template. 0x80094811 (-2146875375)
I double-checked our custom template and it does specify 2048 as the minimum key size.
Also, when trying with Chrome 11.0, I get an extra option during enrollment asking for a key size (1024 or 2048). When I choose 2048, the certificate request succeeds. I don't get the key size option when using IE, though.
We'd like to get this working with IE if possible. Any ideas?

We had the same error message. The problem turned out to be on the requesting computer, not the server. When we went to renew a cert in IIS on a server it was generating a 1028-bit key request. Since the minimum on the server was set to 2048-bit
the request failed. So, there's two ways to handle this. You can change the certificate template on the server to have a minimum set to 1024-bit or you can have IIS submit a new request for a certificate and choose 2048-bit as the size of the key during the
wizard. We opted to have IIS request a 2048-bit key. The same would apply for whatever computer, device, or software you are using to form the certificate request.
Your message is pretty old, but I am running on the same problem right now. I've added a custom template to select (with 2048) minimum length, but the webpage from the IIS by default provides just 1024-bit. Where can i optimize the IIS to use a 2048-bit
key when requesting the certificate?
When I open the same site with Firefox for example, i got a listed option (Medium / High Strength) to choose for the encryption. It seems that the high strength is >= 2048-bit.

Is there a way to display the legend for a chart, but not the chart?

Hi,
I have a stacked column chart and a line chart on top of each other. I can't use the legend for the stacked column chart because the data will change from month to month, and the 2 charts will not be aligned. I copied the stacked column chart to another part of the canvas and want to display only the legend, but the chart is still displaying. Is there a way to prevent the chart from displaying? Thanks.

hi Jim Wojewnik,
we can show only the legend in a pie chart by dragging the edges to closer.do the following,
select the pie chart,select the edge of the chart and make it small and u ll find the pie chart shrinking.make it lean such that the pie chart disappear.
try this work around and let me know.
regards,
ravi.

ABUMN-error "Posting transaction is not possible (Value date not allowed)"

Hi,
When we are trying to transfer asset within company code thru Tcode ABUMN, we are getting a error as
"Posting transaction is not possible (Value date not allowed)"
What actually we are doing is we are trying to transfer the previous year asset for example say 01.04.2007 assets on today.
the Parameters are as below
Document date :26.03.2008
Posting Date :26.03.2008
Asset value date is 01.04.2007.
Then the system is throwing an error and not alloing to post the previous year transfers.
Can any one help me out.
Cheers
Sri

Hi,
I think, if you give old asset value date, system will give you the error. This may be because, you are trying to transfer the assets with old values, means in your examble the dep. from the 01.04.2007 to 29.02.2008 whould have been charged.
So, give the current year date means any date from 01.01.2008 to till date.
If you read F1 help for the value date column, it states,
Asset value date
The asset value date is the value date for Asset Accounting. It can deviate from the posting and document date and be in posting periods already closed for Financial Accounting. However, the posting year and asset value date year must be the same.
Since the asset value date can have a direct influence on the amount of depreciation, the system creates a default value when it can. You can specify in Customizing how the the default asset value date is determined by the system.
Hope it helps
Saravanan.A

BO 4.0 Web Intelligence, Error: Column Chart shows not the whole data

Similar Messages

Maybe you are looking for