[BO 4.0] Webi scheduling issue

Hi,
We are using Business Objects 4.0. i have a webi report that uses SAP BW as source. We are using DF to create universes for these webi report. In DF Admin tool, we have manually mapped the RFC connection to programID field. While scheduling this webi report, scheduling fails with the following reason,
Database error: [Data Federator Driver] [Server] [Connector 'RC_SalesAw'] Connection failure: com.sap.conn.jco.JCoException: (103) RFC_ERROR_LOGON_FAILURE: Password logon no longer possible - too many failed attempts on 172.16.8.135 sysnr 01. (IES 10901)
Note that we are providing the corrrect user name / password for these users.
Please provide your inputs on this issue.
Thanks,
Ravi

Hi,
despite your assurances,  it clearly indicates that the logon string provided for the relational BW connection is not authenticating correctly..
Whilst your BO logon may be correct, i would encourage you to check all the credentials used elsewhere in this connectivity
Does this same universe refresh correctly when running webi in ad-hoc mode?  i.e. not scheduling?
If Yes - i'd recommend you log a Support message.
Regards,
H

Similar Messages

  • Sending an email to the user if the WEBi scheduling failed in CMC

    Hello Everyone,
    Current scenario :
    I am scheduling WEBi report through CMC and the report is going to end user email as an excel attachment.
    Desired Functionality :
    What happens is if the scheduling fails due to some reason. The email does not go to the end user on a particular date and then he complaints.
    What i need here an email sending option that if the WEBi scheduling has been failed in CMC an email should go to the user saying : " The WEBi scheduling has failed. The team is working on it " . (This is just a sample message)
    So the idea is to send an email to the user when the WEBi scheduling fails in the CMC. How to achieve this ?
    Regards,
    Ashutosh Singh

    Hi Ashutosh,
    You can send an alert email to a group when the schedule fails to run by choosing the "A job has failed to run" option under notification.
    You can see this option only if you schedule the report through CMC.
    Regards
    Sunil

  • Issue inMaintenace scheduling issue in Two plants with similar data set up

    Hi PM Gurus
    Scenario: A) We Have two maintenance Plants which have got Factory calendar assignment as per Table Data. We need to change Non Working days of factory Calenders (D1 and T2) for work centres working and do Maintenace scheduling
    Issue    A) Plant PL0B  has got factory Calender T2 set up at work centre (WCT2) .We get Maintenace schedule Calls as per Calender set up ie No Maintenace Call (Planned call and Call date) on  (Non Working Days). Here we change public holidays to working days and this throw schedule calls accordingly (thatu2019s Maintence Calls on working days only).
    B)     We have similar requirement to change public holidays for Calender D1 which is assigned to Work centre WCD1, then we must get maintenance calls for working days. But we find that for Plant PL0A, Maintenace Calls are generating even on non working days. Only difference between Plant PL0A and PL0B is for Work centre set up as per screen shots for Capacity data.
    C)     We have changed work centre data of WCD1 as per WCT2 ,but still PL0A is giving maintenance Calls on Non Working days (Not Controlled by Calender data of Work Centre )
    D)     Info: Scheduling indicator in Maintenace plans of both plants is TIME
    Plant      Factory Calender (plant      Factory Calender
    (Work Centre)     Non Working Days                                                      Work Centre (PL0A)
    PL0A       U1     D1     3-Public holidays                                                WCD1
    PL0B     T1       T2     Sat ,Sun and 10 Public holidays                                WCT2
    Thanks
    Upinder

    Greetings Upinder,
    You should set the Scheduling indicator to "Time - factory calendar" and select a Factory Calendar if you want the Maintenance plan to be scheduled according to one of the calendars you set up.
    The work centre capacity scheduling doesn't come into place here, yet - it'll allow for rescheduling once the orders are called.

  • Office Web Apps Issue - "Sorry, something went wrong" message when opening a document (any MS docx,ppt etc) in IE. With Chrome, it pops (Microsoft Office needs your permission) message and on RUN, it opens the document.

    When opening any Microsoft documents ( docx, ppt etc) in SharePoint 2013,
    Internet Explorer behavior : "Sorry, something went wrong" An unexpected error has occurred message and then nothing happens. 
    In Chrome : Pops (Microsoft Office needs your permission) message and on clicking RUN, it opens the document.
    In Firefox : the documents opens, after asking which application do you want to use to open it.
    The feature (Open Documents in Client Applications by Default) is not activate.
    Why the MS documents are not working in IE 10?

    Hi,
    According to your post, my understanding is that you failed to open Microsoft documents in SharePoint 2013.
    I recommend to Run the following PowerShell in OWA Server :
    Remove-OfficeWebAppsHost # To Remove any restriction
    Or
    New-OfficeWebAppsHost -Domain <String> # To allow specific domain Name
    In addition, you can allow OAuth via HTTP using the following commands:
    $config = (Get-SPSecurityTokenServiceConfig)
    $config.AllowOAuthOverHttp = $true
    $config.Update()
    Here are two similar articles for you to take a look at:
    http://blogs.msdn.com/b/fabdulwahab/archive/2013/10/30/office-web-apps-with-sharepoint-2013-issues.aspx
    http://stevemannspath.blogspot.in/2013/03/sharepoint-2013-office-web-apps-issue.html
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • SDK sample code for Changing name of Exported file thru Webi schedule

    Hi experts,
    I am wanting to know if someone has got any sample Java SDK code which I can use to login to FTP and rename the pdf files generated from webi schedule script and append customised date format towards the end.

    Hi Prabhat,
    For online samples
    https://www.sdn.sap.com/irj/boc/samples
    For detalied descripation on BO SDK.
    https://www.sdn.sap.com/irj/boc/sdklibrary
    For BOE SDK guide.
    http://help.sap.com/businessobject/product_guides/boexir31/en/boesdk_java_dg_12_en.zip
    This would give you complete information on scheduling.
    For RE SDK guide.
    http://help.sap.com/businessobject/product_guides/boexir31/en/resdk_java_dg_12_en.zip
    This would give you information on how deal with Desktop intelligence report and Web intelligence report.

  • Upgrade to ECC6 & Unicode: IE Web Browser Issues?

    Has anyone experienced web browser issues at display time? We are on IE7. We are now using the internal ITS. Our carriage returns are totally being ignored by the browser. Thus, we have a dropdown box to pick one of the businesses multiple partners, and because the HTML is not formatted correctly in the browser, the dropdown doesn't work, and we get an "array not created" error messsage in IE7.
    I know that there are options in the IE 7 browser under the menu item "view". I've tried changing these to some different Unicode settings, but without luck.
    Has anybody some experience with this issue?
        Thank-You

    Hi Tim,
        this might be problem with Support package, by default Sap neweaver 2004s application comes with SP6, u can upgrade to higher SP to solve these type of problems.patch your system up to SP12 or SP13 and try.
    Thanks & Regards,
    Manikandan Dhanakoti
    Edited by: Dhanakoti.M on Oct 23, 2009 7:45 PM

  • Web Query issues

    Hi All,
    I have created a web query and assigned it to a role. I have moved the role, web templete and the query from dev to QA was able run the query fine without issues.
    The problem I am having is when I make changes to the query and transport it to QA...when I run the query from the role menu it still shows the old query instead of the changed query.
    Can someone please explain what are the steps I need to take when I make changes to exsisting web query in dev and move to QA and be able to see the changes. What are all the objects I need to collect. Also would like to know if there are any settings on the role menu or web templete that need to be changed and also any buffers that I need to cleared??
    Any help is appriciated and will give max points.
    Thanks

    BWdesi,
    please avoid reposts - it could be that due to network issues the post got posted twice... close one of them as answered and then proceed with the other one...
    Web Query issues
    Arun

  • Guest Anchor - Web Passthrough - Apple device web redirect issue

    Hi All,
    I've setup a Guest Mobility Anchor at DMZ with 5508 WLC. I've setup the EoIP mobility tunnel and everything works so far.
    Now, I was testing multiple clients to connect to the Guest SSID and observed that Apple devices are not redirecting url, resulting unsuccessful connection.
    I looked Cisco docs and added the command "config network web-auth captive-bypass enable" on the Anchor as recommended.
    Even after executing the command, I'm still facing web redirect issue with Apple Devices. I don't have any issues with other devices, except Apple.
    My controller running code AirOS 7.6.130.0. I'm using DMZ controller as DHCP server for Guests and public DNS servers as 8.8.8.8 & 8.8.4.4
    How to solve this web redirect issue? Will a Third-party generated CSR solves the problem?
    Thanks,
    CJ

    Hi All,
    The issue was with WISPr Protocol with iOS Clients. After upgrading the AirOS Code on the controller to 8.0.100.0; the issue with Web Redirect is resolved.
    Jagan

  • Lync 2013 Web Scheduler How to setup guide

    Hi,
    Can you please tell me the step by step guide to configure Lync 2013 Web Scheduler
    Thanks

    Thanks for reply,
    I have already follow the link that you have mentioned
    http://cmcgreanor.wordpress.com/2012/11/14/lync-2013-web-scheduler/
    But how can i do the following from the link.
    There is one more step
    Now it is time for the BootStrapper:
    Run and check the results for the IIS URL Redirect.
    Can you please help me on it
    Thanks

  • Lync 2013 Web Scheduler SMTP Server for invitations - non-exchange env

    We cannot get the Lync 2013 Web Scheduler to send email invites to anyone even after configuring the SMTP server for both the external and internal sites on our one and only front-end (we did the super simple same box install for testing
    purposes).  Yes we have done an IISReset;)  Has the SMTP server configuration process for the now built-in Lync 2013 Web Scheduler changed since the add-on Lync 2010 Web Scheduler?
    BTW, unless we haven't search for the right phrase(s), it seems there is ZERO documentation about configuring this for 2013 - only for 2010.
    HELP!!!

    Hi,
    You can refer to this blog Lync web scheduler without Exchange:
    http://blog.lyncfreak.com/2011/11/02/lync-web-scheduler-without-exchange/
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
    sure that you completely understand the risk before retrieving any suggestions from the above link.
    Kent Huang
    TechNet Community Support

  • Web Perfomance Issue

    i have problem with Web Performance issue with Application server 10g
    is their any parameter need to be adjust

    Hi,
    when i find some problem related to performance, my first check is the database, is there locks in the database when these perfomance issue arise ? are tables analyzed ? optimizer_mode = choose ? have you try to check the querys that ADF e "lauching" to dabase ?
    Also, are you using Connection Pool in application server ?
    Just some ideias
    Best Regards
    Rui Madaleno

  • Webi Report scheduling issue

    Dear Experts,
    I have webi reports which are running fine when i refresh the query from query panel. When i am scheduling the report it is failing.
    My webi reports are connected to the Bex Queries using OLAP Connections which is working fine for other reports.
    I am getting the following error message
    "Can not connect to the source olap com.sap.conn.jco.JCoException: (103) JCO_ERROR_LOGON_FAILURE: Access key access is no longer possible"
    Because of this BW Credentials are getting locked and user cannot able to access the BW System.
    Kindly help us getting this issue solved.
    Thanks in advance.
    THanks & Regards,
    Archit Sarwal

    Hi Archit,
    Try this...
    Logon to Central Management Console (CMC) with an Administrator user.
    Click on OLAP Connections.
    Right click on the connection and click User Security.
    Assign Full Control to the User on the connection.

  • Strange issue with WEBI schedule Report

    Hi All,
    I have a strange issue with schedule WEBI reports, a schedule report runs for Hours , i reschedule it again by deleting the instance and the schedule report never got succeed even after running for hours.
    Any idea???
    regards

    Hi Manoj,
    1. Try to put some filters in the report and then run the report. if it takes less time, then probably your query is fetching very    large data.
    2. MDX query error may be the reason , this error come when a query runs endless, please try running the query 2-3 times, or when load on server is less.
    Hope this will help,
    Anamika.

  • Error on webi schedules on HPUX environment - XI 3.1

    Getting this error when scheduling a webi report:
    Error Message: Could not save the document to the repository for the following reason: [repo_proxy 30] DocumentFacade::uploadBlob - Query execute has failed : Error occurred while attempting to reconnect to CMS : Not a valid logon token. (FWB 00003) (hr=#0x80042a70) (WIS 30567) 
    =======================
    Title: Test for Scheduling 
    Document Type: Web Intelligence Report 
    Status Failed 
    Destination: Default 
    Owner: Administrator 
    Creation Time: 5/28/2010 7:33 AM 
    Start Time: 5/28/2010 7:33 AM 
    End Time: 5/28/2010 7:33 AM 
    Server Used: sia_MACHINE.WebIJobServer2 
    PID:  20241 
    Parent Object Path: Tesla/ 
    Remote Instance in Federated Cluster: No 
    Expiry: 5/28/2010 7:40 AM 
    Formats: Web Intelligence 
    Parameters: 
    Error Message: Could not save the document to the repository for the following reason: [repo_proxy 30] DocumentFacade::uploadBlob - Query execute has failed : Error occurred while attempting to reconnect to CMS : Not a valid logon token. (FWB 00003) (hr=#0x80042a70) (WIS 30567) 
    ===
    System Information
    XI 3.1 SP2; FP 2.6
    SAP IK XI 3.2 SP2 FP 2.6
    HP64
    Tomcat55
    single server

    As per SAP Note - 1432731, this issue is targeted to be fixed in SP5.  The proposed workaround is:
    - restart  CMS, then the Adaptive Job Server(s) and WebI Processing Server(s).
    For some Production environment that may be an issue.
    However, I also tested following workaround which seemed to have worked:
    1. launched the Instance Manager and checked how many Pending instances objects were displayed for a single report.  
    There were too many (about 1,595)
    2. Used the Query Builder and delete those Pending instances
    Having applied this workaround, most of recurring reports completed successfully.

  • Excel unable to read WEBI schedule download excel file

    Hi experts,
    We use BO central management's instance manager to schedule download a report as excel format in our ftp share folder.
    And the download did run successfully and an icon of the file been shown as excel  format in ftp folder.
    while we use excel 2007 to open the file, excel pop out the message of unable to read the file.
    it is saying the excel found unreadbale content in report. Do you want to recover the contens of this workbook? if you trust the source of this workbook, click yes. after applied the yes, excel stil pop out the message of unable to read the file.
    the general tab in excel been uncheck the "ignore other applications that use Dynamic Data Exchange (DDE), but result still shown unable to read.
    The whole set of report can be run in WEBI and using save report to my computer as excel without any issues.
    WEBI been setup as refresh on open.
    Any clues?

    Hi,
    Did you create a PivotTable report in the file? As your description, the HTML format could be used correctly in Excel 2007. Did you get the other error message?
    Such as,Unable to read file.
    When you click OK,   you receive the following error message:
    Errors were   detected in '<var>filename</var>.xls', but Microsoft Excel was   able to open the file by making the repairs listed below. Save the file to make   these repairs permanent.
    PivotTable report   '<var>report_name</var>' on   '[<var>filename</var>.xls]worksheet_name' was discarded due to   integrity problems.
    Please try to use the workaround:
    Turn off AutoRecovery when you work with any workbooks.Click Excel button>Excel options>Save>Uncheck AutoRecovery
    Following this, if the issue exists, I recommend you fix the issue the following KB：
    http://support.microsoft.com/kb/943088
    http://support.microsoft.com/kb/929766
    Regards,
    George Zhao
    TechNet Community Support

Maybe you are looking for