BO 4.1 LCM not able to access through Web Browser

Hello Folks,
I installed BO 4.1 in my Vmware workstation 10. successfully. its working fine all tools and web based tools like CMC and BI launch pad.
I have problem while connecting to LCM through below link.
localhost:8080/BOE/LCM
Once i get hit this link on google crome browser I'm getting below error. Please anyone suggest me how to access LCM in my local server.
404 Missing Page
The page you requested is not available on this web server for one of the following reasons:
The address you typed may be inaccurate. For example, a character was missing. To correct this issue, double-check the address and make sure that it is spelled correctly.
If you clicked on a link or button, the web application that generates this link may be experiencing a temporary problem. Close and restart your browser and try the link again at a later time.
After verifying that the error is not the result of a bad address or web application problem, perhaps the page you tried to access may no long exist or can not be generated. Report this problem to the webmaster or the administrator.If you are the webmaster or the administrator of this web server, refer to the SAP BusinessObjects FAQ page regarding HTTP errors for more suggestions.
If the problem still persists, please:
Search the SAP BusinessObjects Knowledge Base Articles for similar cases.
Contact with SAP BusinessObjects Customer Support.
Thanks
venkat

Hello Jawahar,
Thanks for your reply.
Your right from 4.0 its a Promotion Management activity with LCM.
Here my question is I'm not able to Access LCM thorogh Localhost:8080/BOE/LCM.
Please anyone help me how to do rectify this.
Thanks
venkat

Similar Messages

Not able to access the web based RuleAuthor of Oracle Business Rules

Hi ,
I have Installed Oracle SOA Suite (11g) version from here .
I have followed the steps in the Installation guide .
I was able to install it successfully. At present I need to Work on the oracle Business Rules.
As per the documentation I have tried to access the Rules author at the following URL
http://localhost:7001/ruleauthor/
But I was not able to access it.
Please let me know if I need to install any other component to access Rule Author. please let me know if you need any more information.
Thanks in advance for your time,
Raja Kumar

Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.

ACE unable to access through web browser.

Hi Team,
We have 4710 ACE in our network and currently we are using software version A3 2.0.
Currently we are not able to access the ACE through web interface but Telnet is happening properly. Connection is establing while we are doing the telnet to ACE through port 80 and port 443. Kindly suggest what will be the Issue? Please find the below dummy configuration.
resource-class SLB_STICKY
limit-resource all minimum 0.00 maximum unlimited
limit-resource sticky minimum 10.00 maximum equal-to-min
access-list ANY_Traffic_Permit line 8 extended permit ip any any
access-list ANY_Traffic_Permit line 16 extended permit icmp any any
class-map type management match-any CM_Remote_MGMT
description *** Class-Map defined the permitted Protocol list for Remote Management ***
201 match protocol icmp any
202 match protocol telnet any
203 match protocol http any
204 match protocol https any
205 match protocol snmp any
policy-map type management first-match PM_Remote_MGMT
description *** Policy-Map defined the permitted Protocol list for Remote Management ***
class CM_Remote_MGMT
permit
interface vlan 60
ip address 10.160.7.3 255.255.255.0
alias 10.160.7.2 255.255.255.0
peer ip address 10.160.7.4 255.255.255.0
no normalization
no icmp-guard
access-group input ANY_Traffic_Permit
access-group output ANY_Traffic_Permit
service-policy input PM_Remote_MGMT
no shutdown
Thanks in advance..
Regards,
Ranjith

Hi Ranjith,
I dont see any problem with the config as per the doc.
http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/ace_appliances/vA3_1_0/configuration/quick/guide/setup.html#wp1010367
What browser are you using? Did you atleast get a message to accept the SSL certificate as trusted when you access https://10.160.7.3
Regards,
Siva

Not able to access SOAP web service data control from adf mobile

Hi,
I am trying to call web services from adf mobile..
I have created data control from external web service and it is perfectlly working on web browser..
But why it is showing an error on emulator??
Is there any .jar file missing in adf mobile so that it is not supporting a web service?
Or is there any other problem? Emulator is connected to network and I am able to run WSDL in emulator's browser..
Please help me to solve this issue..
Thanks,
Laxmi

Emulator is connected to network and I am able to run WSDL in emulator's browser..
Connecting to WSDL in the browser is not the same as connecting to WSDL in an application.
To access a web service from an Android device enable a permission in AndroidManifest.xml that allows applications to open network sockets. Add the following uses-permission element.
<uses-permission android:name="android.permission.INTERNET"></uses-permission>

Not able to access secure web sites

I have a satelite modem that connects via WAN port to my Airport Extreme which then is connected via LAN port to Netgear ethernet card on my PC. After just getting the broadband last week, I noticed that I cannot access certain secure sites such as my bank or american express site on my PC but I can do it via wireless from my PowerBook G4. When I bypass the Airport extreme and connect the modem directly to the PC ethernet card, I can then acess the secure sites on my PC.
Can some please help to solve this so that I can acess the secure sites on my PC as well when using the Airport Extreme?
After taking to tech supprot at the Hughes.net they say that the router is somehow blocking the sites into the PC- something about a MTU or something like that?
Thanks for your help
Faltu1

Thanks Duane for your prompt reply.
My knowlede of computers in very shameful. I am not aware of any software on the PC that has the wireless port more restricted. All I have is the AVG free Anit-virus and the Free Microsoft Fire Wall installed.
If it is a software blocking the ports; how can find out which one it is and what can be done to fix it.
Are there some settings on the AEBS that can be adjusted for it to communicate better with the PC to all the sites to pass through.
I did find some thing on the appple web site about restricted website but I don't understand what it means and wether it really applies to my situation. See below:
Restricted address ranges
Using AirPort Admin Utility or AirPort Utility, check the "Public" or "WAN" IP address. If this address starts with a "10" or "192", your ISP is using restricted address ranges. This may affect the ability of the base station to share the Internet connection among computers. If you have difficulty connecting to some websites when the base station has a public IP address beginning with 10 or 192, use AirPort Admin Utility or AirPort Utility to turn off connection sharing for the base station. Only one computer will be able to connect through the base station. If you have a broadband modem, you may need to unplug its power supply for a few seconds to reset it. If that resolves your issue, contact your Internet service provider. In this configuration the base station is serving as a wireless bridge between your computer and the ISP, rather than as a wireless router. To connect more than one computer, your ISP would need to assign additional IP addresses to your account.
Thanks for your help again.

Ethernet and Internet detected, not able to connect to web-browser

I'm working on a 15" powerbook. I just got back to school, and when I plug into the ethernet port,my computer detects that the ethernet is plugged in and that I am connected to the internet. My IP Address is recognized and everything else. My problem is that when I try to open a web browser, it says it can't find the server. The same for when I try to log into AIM. I am connected to the network, as I can see "shard music" in iTunes and everything else. I am connected using DHCP. Anyone know where I should start? The "help-desk" here is of no help.

Could be a DNS error,
enter http://17.254.3.183 into your address bar.
If you get to the apple site, then it is a DNS error.
if not, I'd pull your system config plists and restart.
macHD/library/prefs/system config

Not able to access Microsoft web sites

Hi!
We cannot only access Microsoft Websites through ISA 2006 on web proxy clients and even on ISA itself. We disabled all the rules but still cannot access. ISA server cannot access Microsoft websites even if we use direct connection to internet without using
proxy.
Any Suggestions?
Thanks.

Hi,
In addition, have you received any error messages? Firstly, I recommend you to ping the website or nsloookup the website?
Please make sure that those websites are not added
in restricted sites on your browser or you can change a browser to see if the issue persists.
Best regards,
Susie

IPhoto library not updated when viewing through web browser, why?

I post a lot of pics to my blog on Tumblr. When I do I go to Tumblr, choose "Photo" and it brings up the screen with the options. I click the universal "browse" button and it brings up the finder. I click on the "Photos" icon under the "Media" section and it brings up my iPhoto library. The problem is it will be missing the newest photos I've imported. I could have imported photos days earlier or just a few minutes ago they just aren't there to choose.
Of course on some days they are available and I can't figure out where the disconnect is. Anyone have a clue? This is not tied to any particular browser either, I've tried them all. I feel like the meta data file iPhoto keeps (is it an xml file or something?) is not being updated? I have no idea. Any help is appreciated. TIA!

Have you tried clearing your browser's cache? I find that sometimes (particularly with Safari) it is inclined to retrieve old pages from its cache rather than from the web.

Not able to access the application through URL in clustered environment.

Hi,
I recently depoyed my application on clustered environment of weblogic 8.1 SP4.
Now I am able to access the application through the managed server name with port number but not able to access through URL.
For ex
http://machine1:7001/test/login.do?m=begin
this is accessible
If I use
http://test.domain.com/test/login.do?m=begin
Then application is not accessible.
any HTML or JSP page page is in reach by both the URL.
Please suggest me what should I do in this regard.
thanks
singhV

Hi Syed,
I meant to ask are you able to see the application you created in Hyperion Planning Login page,if yes try accessing the created application through Hyperion Planning(Try restarting Planning Services once even if you are able to launch hyperion planning page) url "http://servername:8300/HyperionPlanning and selecting the application you created.
And also could you please let me know if you are logging in to workspace through admin username ? and also check if you are able to see the application in shared services and try to provision any group on that application.
(The Assumptions are if application is not created successfully then it will not be available in workspace to launch and if its in maintainance mode (Application Maintenance Mode) in Application Settings and last would be check OHS and Hyperion Planning Services)
Thanks
Amith

APEX application not able to access

Hi all,
I am new in APEX.
and I have to create the same environment as the client have.
client only given me sql for importing the application developed in APEX.
I created workspace and imported the application in that. but the client is using the active directory authentication and now when i am trying to run the application at my environment then i am not able to access the application.
So could any one of you please guide me what i need to do with the APEX to login to the application with my active directory authentications.
this is somehow urgent and i am not able to get any help. so could anyone guide me.
Sanket
Edited by: user10528895 on Oct 28, 2010 10:46 PM

Hi ajinkya,
Thanks for forwording the helping hand.
but can able to mannage and found some documentas of configuration of LDAP and using the LDAP authentication at my own. and now i configured the LDAP and able to access the application.
now the next step i am stuch is the authentication is of 2 layer 1 i passed but next is there are some of the authorizations schems created and assigned to the specific users.
now if i want to get the information of the authentications schems and where the data store then from where i get the information that is my question
i am using database version 10g 10.2.0 and apex 3.0.1
Regards,
Sanket

Sharepoint 2010 - Not able to access Sharepoint 2010 Public facing site on mobile browsers

Hi All,
Earlier, I posted a similar question in the forum , but did not get appropriate response . Posting it again with some more information .
We are not able to access Sharepoint public facing site on Mobile browsers like chrome, IE, Safari (However the site is working fine on Firefox mobile browser and on PC/Laptops as well .)
Following is the error we are getting :
"Cannot set custom attribute on mobile controls in this page. Custom attributes specified are Access Key=0."
I checked in the event logs , following was the exception :
Exception captured in Exception HttpModule: System.Web.HttpException: Server cannot append header after HTTP headers have been sent.
   at System.Web.HttpResponse.set_RedirectLocation(String value)
   at Microsoft.SharePoint.Utilities.SPMobileUtility.Redirect(String url, SPRedirectFlags flags, HttpContext context, String queryStrings)
   at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.HandleMobilePageRequest(HttpContext context)
   at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PostResolveRequestCacheHandler(Object oSender, EventArgs ea)
   at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
   at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Also, there was a microsoft OS security patching on our farm servers post which the error starts coming . Following were the patches that were installed
1. MS14-005
KB2916036          Security Update for Windows Server 2008 R2 x64
Edition (KB2916036)
MS14-009
KB2898857          Security Update for Microsoft .NET Framework 3.5.1
2. on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems
(KB2898857)
3. MS14-009
KB2901112          Security Update for Microsoft .NET Framework 3.5.1
on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems
(KB2901112)
4. MS14-009
KB2911501          Security Update for Microsoft .NET Framework 3.5.1
on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems
(KB2911501)
5. MS14-011
KB2909210          Security Update for Windows Server 2008 R2 x64
Edition (KB2909210)
6. MS14-012
KB2925418          Cumulative Security Update for Internet Explorer 8
for Windows Server 2008 R2 x64 Edition (KB2925418)
7. MS14-015
KB2930275          Security Update for Windows Server 2008 R2 x64
Edition (KB2930275)
8. MS14-016
KB2923392          Security Update for Windows Server 2008 R2 x64
Edition (KB2923392)
Has anyone of you ever faced similar(site not opening on mobile browsers) issue after installing these patches on farm servers .
Any help would be much appreciated .
Thanks
Saquib Khan

We have found below error related in ULS as well as event viewer both :
Exception captured in Exception HttpModule: System.Web.HttpException: Server cannot append header after HTTP headers have been sent.
at System.Web.HttpResponse.set_RedirectLocation(String value)
at Microsoft.SharePoint.Utilities.SPMobileUtility.Redirect(String url, SPRedirectFlags flags, HttpContext context, String
queryStrings)
at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.HandleMobilePageRequest(HttpContext context)
at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PostResolveRequestCacheHandler(Object oSender, EventArgs ea)
at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Saquib Khan

User has contribute access but he is not able to access the site collection...

User has contribute access but he is not able to access the site collection...

What error does he get.
Can you share fiddler trace(check if any 404 error)
what error do we see in ULS Logs
Create disableloopback
registry on server
http://support.microsoft.com/kb/926642/en-us

Not able to access blackberry world on Z10. what could be the reason?

not able to access blackberry world on Z10. what could be the reason? It wasn't issue earlier but facing it from last two days.

Please guys read other forums on this community before posting redundant issues.
Try this fix
Go to the games app.
At the bottom tap on games.
At the right bottom, you will notice three dots. Tap the dots
Tap the option to enter the blackberry world. Wait until the screen is loaded
Swipe right to Enter My World - > My Apps and Games.
Tap the three dots again to check for updates.
Update all the apps and close your App World.
Try accessing the app world in the standard way. Everything mus be fixed by now.
Twitter: @ukmight
1. Click on the " Like " button if you find anything helpful posted.
2. If any of the replies in your post has resolved your problem, mark the reply(ies) as " Solution ", so that others can readily view the solution instead of creating another redundant post.

Not able to access webservice after migrating from 8.1 to 10.3,plz help

Hi All,
Prev our application was running in weblogic 8.1 and now we moved to 10.3
We are able to deploy our webservice in 10.3 and access the wsdl but we are not able to access the webservice from the client.
Even the testclient is not comming up.
After spending long time in that,now i dont have any clue on this issue.
Plz help on this
Thanks ni advance,
Mouli

Sunil,
We are not seeing any exception.We regenerated the webservice and then deployed in the 10.3
When we make req from the client ,we are getting null response but thing is there are no log trace in the server side for that
folllowing is the input string we are pasing to the method notifyservice
IN the client we pass the wsdl url and then pass the following input string and hit the notifySerivce method
Req:
<?xml version="1.0" encoding="UTF-8" standalone="no"?><object><GLCCode>102431</GLCCode><callBackNumber>888256798</callBackNumber></object>
Res:
<m:notifyService xmlns:m="http://www.testportal.com/outbound/tsp/WowWebservices">
<result xsi:nil="true"/>
</m:notifyservice>
Therre was an exception in the client side,plz check below
javax.xml.rpc.soap.SOAPFaultException: Failed to get operation name from incoming request
at weblogic.webservice.core.ClientDispatcher.receive(ClientDispatcher.java:317)
at weblogic.webservice.core.ClientDispatcher.dispatch(ClientDispatcher.java:147)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:473)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:459)
at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:569)
at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:422)
Thanks For your time,
Mouli

I am not able to access my photos through the photo application... when I click on the photo app, I can see the camera roll but a transparent album screen is over it and I cannot click on the photos to see it... can any one please help ???

I am not able to access my photos through the photo application... when I click on the photo app, I can see the camera roll, but a transparent "album" screen is over it and I cannot click on the photos to see it... can any one please help ???

Known bug. Quit the Camera App, double-tap the home key and delete Camera from the recent apps bar. Fire it up again, should be good.

BO 4.1 LCM not able to access through Web Browser

Similar Messages

Maybe you are looking for