BO 4.1 SP3 upgrade - WebI loses hierarchy selection

Dears,
A client upgraded his BO Platform to 4.1 SP3. They are using heavily using WebI for Reporting on BEx Queries. The WebI reports have been created in WebI 4.x. Many reports using hierarchies with a specific selection of the hierarchy elements. If the run the WebI report on their 4.0 platform the hierarchy in the query panel is selected. After the upgrade, the webi reports loses the selection, thus in the Query Panel now node of the hierarchy has been selected. The Webi could not be refreshed without selecting the appropriate nodes. Bot systems are connected to the same query from the same system. All the other webi reports work fine.
Does anyone has an idea? According the admin guide, their is no known issue.
Thanks for your support.
Cheers,
Felix

Are you also having issues with merged dimensions that are used on the sections?
I've had to unmerge, merge, and create the section again. It throws an error if I don't do that.

Similar Messages

After Exchange 2010 SP3 upgrade, UAG publised OWA is throwing a "You do not have permissions to view this folder or page" error

Hi,
We have an issue with our OWA page. We are currently publishing OWA via UAG.
We recently upgraded to Exchange 2010 SP3 and then SP3 Rollup7. Since the upgrade, we are keep getting the following error after entering our credentials on the login page. I've tried with every possible browser.
You do not have permissions to view this folder or page
Strangely enough, the mobile phones are sending and receiving emails just fine, the phones use the same OWA link, so it's not an authentication issue, the phones login into the UAG servers with no issues. I can see this on the Active Sessions screen
on Web Monitor.
I've attempted to connect to the OWA by bypassing the UAG server, so putting in the local OWA address of one of my Exchange servers, it works... so the OWA page is up and running.
No error logs get generated on Web Monitor when we receive the permission error, I think this is because it's past authentication, it's on the Exchange layer.
Any insight would be helpful? I'm assuming something changed on the Exchange side after the upgrade.
Just in case, I've upgraded the UAG and TMG servers to the latest SP and Rollup packets.
UAG > SP4
TMG > SP2 Rollup 5

I've found a solution; UAG requires Basic Authentication over OWA. For some reason Integrated Windows Authentication got turned on after the SP3 upgrade.
http://technet.microsoft.com/en-us/library/ee921443.aspx
Turning Integrated Windows Authentication off via the Client Access OWA settings resolved the issue. Though beware, you
have do this on all your Client Access servers.

BO Webi report hierarchy with measure values showing more(almost double value) compare to BW Bex report

Hi,
In our BO Webi report hierarchy with measure values showing more(almost double value) compare to BW Bex report. Can any one please help on this.
Is it BW problem or BO problem?
I checked in some other threads but it's not given solution.
Thanks,
Manjunatha

Hi,
Is it BW problem or BO problem? : BO
is it causing problem with hierarchly data only ? without hierarchies data is matching or not?
Post same in SAP BusinessObjects Web Intelligence .
Thanks.

Upgrade web link from Acrobat X to Acrobat XI broken

Upgrade web link from Acrobat X to Acrobat XI broken

Hi Jeff
Upgrade from Acrobat Pro X to Acrobat Pro XI
I'm in Perth Western Australia, Australia
TYIA
Have a great day
Kind regards
Bob Fawcett
Clearmoon Pty Ltd trading as
<Removed by Moderator>

Exchange 2010 SP3 upgrade on Windows Server Standard SP2

I'm midway through the swing upgrade process of migrating from Exchange 2003 - Exchange 2010 to Exchange 2013. Everything has gone smoothly between the Exchange 2003 and Exchange 2010 migration which I started two days ago. it has been running
great. I am beginning the final stages of moving from the Exchange 2010 server to a new Exchange 2013 server, but it requires my Exchange 2010 server to be upgraded to SP3. I am now trying to install Exchange Server 2013 SP3 Upgrade and I'm
getting (3) Client Access Role Prerequisites errors. Finding any of these HotFixes and patches is frustrating, because any link provided does not work. It has gotten me nowhere. Here is my Readiness Checks:
Summary: 6 item(s). 5 succeeded, 1 failed.
Elapsed time: 00:01:06
Configuring Prerequisites
Completed
Elapsed Time: 00:00:00
Organization Prerequisites
Completed
Elapsed Time: 00:00:08
Languages Prerequisites
Completed
Elapsed Time: 00:00:02
Hub Transport Role Prerequisites
Completed
Elapsed Time: 00:00:15
Client Access Role Prerequisites
Failed
Error:
Install hotfix Microsoft Knowledge Base article 982867 from http:// code.msdn.microsoft.com/KB982867.
Click here for help... http:// technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex28883C&l=0&cl=cp
Error:
Install hotfix Microsoft Knowledge Base article 979917 from http:// code.msdn.microsoft.com/KB979917.
Click here for help... http:// technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex28883C&l=0&cl=cp
Error:
This computer requires the update described in Microsoft Knowledge Base article KB977592 (http:// go.microsoft.com/fwlink/?LinkId=194843). Without this update, the Outlook Anywhere feature may work unreliably.
Click here for help... http:// go.microsoft.com/fwlink/?linkid=30939&l=en&v=ExBPA.14&id=249bbd89-16b4-4efa-9b66-7ec87f90e44c
Elapsed Time: 00:00:15
Mailbox Role Prerequisites
Completed
Warning:
Multi-mailbox search of on-premises and Office 365 mailboxes in a hybrid configuration requires installation of the update mentioned in Microsoft Knowledge Base article 982867 (http:// code.msdn.microsoft.com/KB982867).
Elapsed Time: 00:00:24
I put a space between the http://" space "URL so I could display the links.
Any help/guidance suggestions would be greatly appreciated.
Chris

I just got these two to go away:
Error:
Install hotfix Microsoft Knowledge Base article 982867 from http:// code.msdn.microsoft.com/KB982867.
Click here for help... http:// technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex28883C&l=0&cl=cp
Error:
This computer requires the update described in Microsoft Knowledge Base article KB977592 (http:// go.microsoft.com/fwlink/?LinkId=194843). Without this update, the Outlook Anywhere feature may work unreliably.
Click here for help... http:// go.microsoft.com/fwlink/?linkid=30939&l=en&v=ExBPA.14&id=249bbd89-16b4-4efa-9b66-7ec87f90e44c
still have this one outstanding:
Error:
Install hotfix Microsoft Knowledge Base article 979917 from http:// code.msdn.microsoft.com/KB979917.
Click here for help... http:// technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex28883C&l=0&cl=cp
I have tried the FIX: WCF services that are hosted by NLB computers to route messages to Exchange Server fail when WebHeader settings are added by using a .NET Framework 3.5 SP1 application
Windows6.0-KB2637518-x64.msu
when I run it, it tells me "The Update does not apply to your system. So im thinking I need to remove the .NET Framework 4 Client Profile and the .NET Framework 4 Extended. reboot, then install
Windows6.0-KB2637518-x64.msu and then reinstall .NET Framework 4 Client Profile and the .NET Framework 4 Extended
this has taken a day or so to figure out the order of dependencies and the order to put them on.
Frustrating, since I won't be using Exchange 2010, were moving all the way to Exchange 2013 on a brand new server.
Chris

After upgrade IOS7 lose my safari brwser and cant delete any app from my i Pad 3rd

after upgrade IOS7 lose my safari brwser and cant delete any app from my i Pad 3rd

Go to Settings > General > Restrictions
Chances are Safari is turned off. Turn it on and you'll have it back.
To delete apps:
Double tap your home button. You'll see the open app icons on the bottom and above each icon a preview page of the open app. With your finger swipe the preview page upwards and the app will close.
EDIT: I misread your last question. The above closes apps, but doesn't delete them. To delete an App, hold your finger on the app until it jiggles. You should see an X on the App. Touch the X and the app should delete.

Upgrade Web Dynpro...Please guide

Hello All,
Portal is on EP 7 SP14 but Web Dynpro is on SP9
How can I upgrade Web Dynpro to be on SP14?
Awaiting Reply.
Regards,
Ritu

Hi Ritu,
By Web Dynpro SP14, do you mean the SP14 of your NWDS?
If yes, you can download NWDS 7.0 SP14 from the following link:
[SAP NetWeaver 7.0 (2004s) Trial Version - Full Java Edition|https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/webcontent/uuid/a62ad7fa-0a01-0010-3489-f3fc32658bd8]
Bye
Ankur

Why is it no longer possible, since the iPhotos upgrade to 9, to select a number of photos and "hold on to them" when changing to a different left-margin "view"?

There has been a downgrade since iPhotos was… upgraded.
Before iPhotos was upgraded to 9, It USED to be that
IF you chose a photo or a number of photos WITHIN an event
(ensuring that they were engulfed in yellow or blue),
and THEN went to the left margin and clicked on Photos
in order to view the ENTIRE library's photos
(not just those in that particular event),
the selfsame photos would REMAIN chosen in the LARGER context.
That is no longer the case.
And that was very useful, because
if you wanted to move a batch of photos within one event
to within another event, that was the easiest way to do so
— whereas now, we have to search for and "find" them all over again.
When I go "back" to Photos, I not only lose the selected images,
say from March 2009, I end up at a totally different place,
say in October 2006, and I have to do lots more "work" finding
the photos again then used to be the case.

Flag the Photos.
Switch to Events View
Select the Target Event
Events menu -> Add Flagged Photos to Selected Event
Regards
TD

Hierarchy selection tab missing in infopackage

Hi Experts,
i am looking how to load multiple hierarchies to Bi so inorder to know available hierarchies from OLTP in hierarchy selection tab in infopackage which was not available at all. i had only data selection tab.i am using version Bi 7.0
how can i found hierarchy selection tab in infopackage
Regards,
narasimha.

Hierarchy loading is the same for info object which is created under the info object itself.
loading is uploading the data to the hierarchy, creating hierarchy is you will be maintaing the structure of the hierarchy under that info object
Are you sure you have Hierarchy maintained for your info object?
If the hierarchies are maintained you will find the Bell type symbol under the info objects in info providers tab.
As told by mti - drill down till you find the data source --right click on it and select create info package - here you can find the tab hierarchy selection tab (which is the second tab in that screen).
Check the below link to know more abt hierarchies
http://help.sap.com/saphelp_nw04/helpdata/en/0e/fd4e3c97f6bb3ee10000000a114084/frameset.htm

Web Dynpro ABAP - Select Option and ALV Component Usage

Hi,
I'm new in ABAP Web Dynpro and i was trying to follow the SDN tutorial
Web Dynpro ABAP - Select Option and ALV Component Usage
In this video, we create a new Web Dynpro ABAP component that uses both Select Options and ALV. Developers can learn the basic mechanisms for working with both of these reusable components.
Following the link: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/39c54fe7-0b01-0010-0eb6-d63ac2bdd637
I implemented and generated the web dynpro with success but when i execute a test i get a dump on select-option definition.
Note
The following error text was processed in the system ECD : Exception condition "TYPE_NOT_FOUND" raised.
The error occurred on the application server ITAWSECCS01D_ECD_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: DESCRIBE_BY_NAME of program CL_ABAP_TYPEDESCR=============CP
I went in debug and the piece of code dumping is:
lt_range_table =
wd_this->m_handler->create_range_table( i_typename = 'S_PROJ' ).
Is there someone who can help me?
Thanks in advance,
Stefano.

Hi,
I'm new in ABAP Web Dynpro and i was trying to follow the SDN tutorial
Web Dynpro ABAP - Select Option and ALV Component Usage
In this video, we create a new Web Dynpro ABAP component that uses both Select Options and ALV. Developers can learn the basic mechanisms for working with both of these reusable components.
Following the link: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/39c54fe7-0b01-0010-0eb6-d63ac2bdd637
I implemented and generated the web dynpro with success but when i execute a test i get
an error as
Note
The following error text was processed in the system EI6 : Exception condition "TYPE_NOT_FOUND" raised.
The error occurred on the application server EC6IDES_EI6_01 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: DESCRIBE_BY_NAME of program CL_ABAP_TYPEDESCR=============CP
I have created a table zmy_table and trying to make USERID field as a select-options.I've written the code as shown below .
data: itab type standard table of zmy_table,
wa type zmy_table.
data:
node_employee type ref to if_wd_context_node,
elem_employee type ref to if_wd_context_element,
stru_employee type wd_this->element_employee ,
item_userid like stru_employee-userid.
navigate from <CONTEXT> to <EMPLOYEE> via lead selection
node_employee = wd_context->get_child_node( name = wd_this->wdctx_employee ).
@TODO handle not set lead selection
if ( node_employee is initial ).
endif.
get element via lead selection
elem_employee = node_employee->get_element( ).
@TODO handle not set lead selection
if ( elem_employee is initial ).
endif.
alternative access via index
Elem_Employee = Node_Employee->get_Element( Index = 1 ).
@TODO handle non existant child
if ( Elem_Employee is initial ).
endif.
get single attribute
elem_employee->get_attribute(
exporting
name = `USERID`
importing
value = item_userid ).
select *
from zmy_table
into table itab
where userid = item_userid.
node_employee = wd_context->get_child_node( 'EMPLOYEE' ).
node_employee->bind_elements( itab ).
Is there someone who can help me and can tell am i doing wrong?
Thanks in advance,
Dheeraj

How-to Dynamic Hierarchy Selection.

Hi guys,
does anyone know how to implement "Dynamic Hierarchy Selection"? I have a main hierarchy but would like to filter it further while loading the hierarchy.
E.g. I have a financial statement verison with both Balance Sheet and P/L items, i would like to separate the main into two new hierarchies, one BS and P/L hierarchies instead, apparently the infopackage allows you to write small codes to dynamically select which hierarhcy you want.
Cheers.

Hi,
We donot have this type selection at the time of upload. The thing we can do is upload both versions into BIW and in the report we can use Hierarchy variable to have dynamic selection of hierarchy.
with rgds,
Anil Kumar Sharma .P

CostCenter Hierarchy selection in the Infopackage

Hi Everyone,
For CostCenter hierarchy, in the Infopackage Hierarchy Selection tab, I can able to find the Parent Node for loading, but there is no Child node available.
Can anyone help on how to bring the child node into the Hierarchy selection tab, and also how to check the Hierarchy node in ECC side.
Thanks in advance,
Satish.

Hi,
You can enter multiple single valus for any field in the infopackage. Just select the row for material type and then click on the insert duplicate button ( + sign ) which is at the bottom letf hand side in the 'Data Selection' tab within the infopackage. You will usually find this 'insert duplicate' icon next to the 'Check' push button.
You can insert as many rows as you want for material type by select the material type rown and clicking on this icon. You can then enter the three values in the three rows for material type.
Regards,
Shilpa

Hierarchy upload-InfoPackage-Hierarchy Selection tab

I have to upload hierarchy for Internal Order. I have InforPackage but on the Hierarchy Selection tab there is no hierarchy that I am supposed to upload (it's called A1). Do I have to extract the missing hierarchy from R/3? Can someone please provide the steps that should be taken?
It's very urgent as I have to finish it today (well, the deadline is the end of this weekend).
TIA,
A.

Hi Arek,
Is ur infosource is properly assigned to the Hierarchy Data source or not!!!!
If not then u need to check the proper data source(From R3) which needs to be used for ur loading.... based on that..
If the DS is available in R3 then replicate the same and assign to ur Infosource..and maintain the proper TS and TR accordingly with the Idocs transfer method..
once this is done then u can able to see the required hierarchy for ur purpose..
make sure that the Hierarchy is available from ur source system.. then only it will be available in the IP selection tab.
thanks
Hope this helps

InfoObject Hierarchy selection screen function

How would I find a function/method for displaying a BW infoobject, like cost center (/BI0/HCOSTCENTER), for a user selection screen in a group/hierarchy format? Similar to BEx hierarchy selection for node level. Are there any example programs for doing this?
Edited by: A. Berkey on Mar 2, 2011 11:13 AM

You mention about the 'Documentation' button.
However, SE38 is a dialog program so this why it is easy to do. You are writing a report program. You could have the pushbutton on the screen itseld instead of the status bar. You should then be able to use LOOP AT SCREEN to hide. Here is some code to put a pushbutton on a screen.
INCLUDE <list>.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN PUSHBUTTON 01(35) garment
USER-COMMAND garment.
SELECTION-SCREEN END OF LINE.
INITIALIZATION.
PERFORM f_setup_pushbutton_text USING icon_execute_object text-s01
                                  CHANGING garment.
FORM f_setup_pushbutton_text USING    p_icon
                                      p_text
                             CHANGING p_result.
DATA: l_result(50).
CALL FUNCTION 'ICON_CREATE'
       EXPORTING
            name                  = p_icon
            text                  = p_text
            add_stdinf            = space
       IMPORTING
            RESULT                = l_result
       EXCEPTIONS
            EXCEPTIONS
            icon_not_found        = 1
            outputfield_too_short = 2
            OTHERS                = 3.
IF sy-subrc EQ 0. ENDIF.
p_result = l_result.
ENDFORM.                               " F_SETUP_PUSHBUTTON_TEXT

FM to import a hierarchy selection...?

Gurus,
I need to advice the BW team with a FM.I have to write a routine to call a function module that imports a hierarchy selection and uses that selection as a criteria to filter on transactional data from an BW infocube. That data will then be converted to a flat file.
Is there a standard SAP function module we can call to use as a selection criteria for a hierarchy.
Please suggest...Kindly help...
Cheers:
Sam
Message was edited by:
Sam williams

Hi Srinivas,
It is not just one hierarchy...there are number of hierarchy sets that have to be read and included in the selection criteria for the infocube...I will try an explain more....In infocube we can use filter to filter the data...now in that filter there is an option of an routine...I have to write that routine that reads the corresponding hierarchy set and include it in the selection criteria...
Example: Profit center will have a routine that will read the profit center hierarchy set amd include it in the range of the selction criteria...
am i able to explain...I have no knowledge in BW so its hard for me to explain....
How can i read the sets...IS there a FM that i can use...please guide me....
Thanks
Sam

BO 4.1 SP3 upgrade - WebI loses hierarchy selection

Similar Messages

Maybe you are looking for