BO-Cannotconnect to Mobile server through Blackberry[InvalidCredentials]

Subject:-BO-Cannotconnect to Mobile server through Blackberry[InvalidCredentials]
Hi,
We are getting an error while trying to connect mobile server through blackberry hand held devices. the error comes out as "Invalid Credentials" or "Network Unavailable" or "Request Timedout"; hv changed the passwords for the userid several times but it's not hitting the server. Thesameconfiguration isworking perfectly with the Simulator.
Kindly provide the solution at earliest.
Regards,
Subhrajyoti Das
9920594288

Hello Subhrajyoti Das , I have the same problem.
it occur on BB 9700 Docomo simulator
I need help from you as you working perfectly with the simulator.
Would you mind send me VAS-server.config VMS-server.config
VAS-cluster.config VMS-cluster.config and capture screen of your connection setting in the simulator. ?
I working on these problem about a week. I will appreciate you so much for helping me.

Similar Messages

Oracle Database Mobile Server

I am running my Mobile Server 11g and i want to test if Server works.
4.6 Testing Your Mobile Server Installation
To test whether your mobile server was installed correctly, test your mobile server through a browser with the following URL:
http://<machine-name>[:port]/mobile
I tried:
http://localhost:7001/mobile
Error 404--Not Found
http://localhost/mobile (without port 7001 form Weblogic Server)
http://desktoppc:7001/mobile (my machine name)
Error 404--Not Found
http://desktoppc/mobile
but i cannot access it... always an error.
please help me fix this error. thank you
jedi

Hi Jedi,
Did you start the Mobile Server ? There is an Icon in the Program Group.
You should be able to see what port its running on appear in the command window when it starts up.
If you have started the Mobile Server but it does not appear to be accessible can you access the WLS Admin Console ? i.e.
http://localhost:7001/console
What logs do you have in the domain you set up i.e.
$OH\Middleware\user_projects\domains\mobileserver\servers\AdminServer\log
regards
Richard

Problem in configuring the Mobile Server.

Hi,
I am trying to configure Mobile Server for Apache for the Apache Server. I am following the steps listed in the Installation guide. As listed in the document I did the changes in the Apache Configuration file "httpd.conf" i.e. I included the Mobile Server module confuguration file into Apache Config file. On starting the apache server I am getting following listed warning,
"[Wed Apr 28 18:14:46 2004] [warn] Loaded DSO D:\oracle\oralite\mobile\server\bin\wtgapach.DLL uses plain Apache 1.3 API, this module might crash under EAPI! (please recompile it with -DEAPI)".
The Apache server is working and through browser I am able to access the default page. But as mentioned in the Mobile Server configuration section the Mobile server is not started or at least I do not know how to access the Mobile server through browser.
Please let me know if the cause of the warning message has any effect on the Mobile Server instantiation and if not how can I access the Mobile Server?
Thanks,
Sachin.

Hi,
I am trying to install the Oracle Lite suit versioned 5.0.2 for Windows. The RDBMS is Oralce 9i (9.2.0.1). I am able to install the Mobile server. Refering the Installation mannual I am trying to configure and run the mobile serve in either standalone mode or with Oracle HTTP server. In the installation mannual it is mentioned that the HTTPD.conf file for apache http server should be modified to include the wtgapach.conf file from the Oralce Lite ORACLE_HOME\mobile\server\bin folder. On making this change and starting the apache server I am getting the error listed in the post. In the mannual it is mentioned that for standalone mode run the webtogo executable from the bin folder. On doing so I am getting a message
"D:\oracle\oralite\Mobile\Server\bin>webtogo
Unrecognized option: -Xrs"
So currently I am stuck and do not know how to start the mobile server. Please let me know the appropriate steps to start the Mobile server in stadalone as well as with Oracle HTTP server.
Also as mentioned by you I replaced the wtgapach.conf with wtgias.conf. The warning message which was displaying earlier on start of Apache is now gone but if tried to start the mobile server from the browser it is not working as expected.
Thanks and Regards,
Sachin.

Connect Mobile for RIM Blackberry Playbook hangs while trying to connect to server

We have Adobe Connect 8 (Multilanguage - Portuguese) installed on a server. Connect Mobile for RIM Blackberry Playbook hangs while trying to connect to the server. Hayward Drummond has posted a notice about Adobe Connect 8.1.2 that seems to solve this problem, known as BUG 2886745. I sucessfuly downloaded this update but I´m not sure if it is compatible with Adobe Connect 8 Multilanguage - Portuguese. Does anyone know something about it? I also need to first install version 8.1.1 in order to upgrade to 8.1.2, as remarked by Hayward. Does anyone know where can I download version 8.1.1 (Multlanguage - Portuguese)?

try to install Firefox 8 on top of Firefox 7, or
Profile is a folder which store all your personal data in a safe place
* https://support.mozilla.com/en-US/kb/Profiles
here explain how to backup profile
* https://support.mozilla.com/en-US/kb/Backing%20up%20your%20information
here explain how to restore it
* https://support.mozilla.com/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile

The Blackbery device simulator is not able to connect to the mobile server.

Hi
While login to Sap Mobile BI i get the below error.
"unable to connect to mobile server.The request is timed out(0x008)"

Thank You for your reply.I had no problem with the mobile network connections it is on.The issue i am facing i am using proxy server deployment where we don't have to mention host_port in the vas cluster configuration due to which i m not able to connect to blackberry Simulator which is on client machine.But if i specify the client machine port to Host_port then i m able to connect.Can you help me to configure the Mobile server for a non-BlackBerry
deployment that uses a proxy server

Can I make another website using iWeb,then publish it to a different server through the SMTP panel on iWeb

Can I make another website using iWeb, and then publish it to a different server through the SMTP panel on iWeb, even though I have a website published on mobile me, can I just use the SMTP engine to publish a different site but to a different server, that's the question I'm asking. I'm hoping for a quick reply. Thank you for your time in reading this.

Yes. You can do it one of two ways:
1 - select FTP Server in the Publish To menu (click on the site folder to get to the options) and enter the FTP address, username and password and publish as you would if using MMe.
2 - select Publish to Folder and publish. Use a 3rd party FTP client like Cyberduck to upload the site files to there server using the FTP address, etc.
OT

Oracle 9I Database, and Mobile Server install history

Dear Oracle technical representative:
This TAR started out as a true request for help in solving installation problems with Oracle 9i Release 2 Enterprise Edition, and Oracle 9i Mobile Server Release 5.0.1, but it has turned into a history of frustration with out of date, laconic, and often incorrect, and misleading documentation. As a software developer, I understand that documentation is always out of date, at least mine is. Nonetheless, I must speak my mind while understanding, and sympathizing with your situation.
I struggled through the documentation, and managed to get everything working. While I was doing that, I wrote down the step by step procedure that I used to get Database, and Mobile Server running. By sharing this rough install history with you, it is my hope that it will help prevent others from experiencing the same difficulties that I have had. It has been my observation that when a user has problems installing a trial software package they give up quickly, and do not purchase a copy. It is thus extremely important that the installation instructions, and quick start guide be accurate, attentive to detail, and well written. The first impression is the one that counts.
The Oracle 9i Lite Installation, and Configuration Guide for Windows NT shipped with Oracle 9i Lite Release 5.0.1 definitely requires, and emergency rewrite. It is terribly out of date, inaccurate, and laconic. My guess is that it is a very sloppy rewrite of poorly written 8i documentation. The Oracle 9i Database Installation Guide for Windows is somewhat better. It however should do a better job informing you that before installing onto a old server the Microsoft Foundation Class (MFC), and VC runtime libraries must be up to date. The history describes the trouble with not having the MFC42.dll at version 6. Another corker is that the default port the installer presents is 2030, and not 1521, and that leads to major confusion in the both the Database, and Mobile Server installs.
Thank you for looking at the history. I hope that it will be of use to you when you update your documentation.
Thomas G. Matney
Mississippi State University
[email protected]
(662)325-2791
TAR for Oracle 9i Release 2 Database Enterprise Edition, and Oracle Lite Release 5.0.1 Mobile Server
Installation problems are highlighted in red.
Installation sequence/history:
     1. Installed Windows NT 4.0 Server SP1 on Dell Power Edge 4300 dual x86 server to wipe the slate clean.
     2. Setup TCP/IP, and IPX/SPX networks
          Computer name YGGDRASILL
          Host name = YGGDRASILL
          Domain = CFR.MSSTATE.EDU
          Internet name = YGGDRASILL.CFR.MSSATE.EDU = 130.18.130.225
     3. Installed NT SP3, and Internet Explorer 4.01 from the NT 40 Options Pack CD as the gateway to installing MTS 2.0, and IIS 4.0.
     4. Installed MTS 2.0, and IIS 4.0 from NT 4.0 Optins Pack CD.
     5. Applied NT 4.0 SP6.
     6. Installed Internet Explorer 5.5 as a prerequisite to installing MADAC 2.6.
     7. Installed MDAC 2.6
     8. Installed Paint Shop Pro 7 for capturing error screens.
     9. As previous install errors stated that the ordinal function xxxx could not be found in MFC42.dll, the latest version (6.0.8665.0) of the dll was installed, and registered from MS VC++ SP5. Also I upgraded MSVCIRT.dll, MSVCRT.dll, MSCRT40.dll, and added MSVC60.dll from SP5 to be on the safe side.
According to the installation documents all the prerequisites for installing Oracle 9i Release 2 Database Enterprise Edition are satisfied.
     10. Began install of Oracle Database Enterprise Edition with target parameters:
          Home directory = D:\Oracle\Ora92
          Database directory = D:\Oracle\oradata
          Global database name = FIA.YGGDRASILL.CFR.MSSTATE.EDU
          Port = 2030
          SID = FIA
          SYSTEM Password = phwphw
          SYS Password = phwphw
          SCOTT Password = phwphw
          DBSNMP Password = I left this one unassigned or empty.
          tnsnames.ora entry for remote TCP/IP connection
          a. CD 1 of 3 load
               1. Error writting to MFC42u.dll. Action ignore. A check indicated that MFC42u.dll version did not match the updated version of MFC42.dll. Plan is to update after install. Unicode version of MFC is probably not used by the installer.
          b. CD 1 completed with only one problem, and CD 2 load begins.
          c. CD 2 installed without incident., and CD 3 load begins, and completes without farther problems. The only issue to address at this time is to update the MFC42u.dll.
               HTTP Server URLs
                    http://7778
                    https://4443
     12. Evaluation of install success begins.
          a. Oracle HTTP Service will not start. It is of particular interest that on installs that I do not upgrade the MFC42.dll the Oracle HTTP Service will start correctly, but during the install I get the error message Ordinal nnnn not found in MFC42.dll, and the Oracle MTS Recovery Service crashes during the install. I am caught between a rock and hard spot on this one. See the Figure 1. At the end of this document. I do not need the HTTP Server at this time but I will need it later and this issue must be resolved. It appears that it hangs during startup. I am sorry but I lost the ordinal number nnnn.
          When I try to start the HTTP server from the Programs menu. It Hangs, and does not return an error message. See Figure 2, and the included Apache Setup.txt, the install log, and the HTTPd.conf . The conf, and setup files look OK to me. What is the problem?
          b. All other services start correctly.
          c. Logged into the database as SCOTT on the server with SQL Plus using the connection information:
               FIA.CFR.MSSTATE.EDU =
               (DESCRIPTION =
               (ADDRESS_LIST =
               (ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
               (CONNECT_DATA =
               (SERVER = DEDICATED)
               (SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
          I created some tables, inserted data, and queried for the data. Everthing seems to be working correctly.
          d. Logged in remotely from my AOL account on a dial-up line using Oracle 9i Release 2 Personal Edition installed on my ThinkPad. Every thing tested out as above. I used the connection information:
               FIA.CFR.MSSTATE.EDU =
               (DESCRIPTION =
               (ADDRESS_LIST =
               (ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill.cfr.msstate.edu)(PORT = 1521))
               (CONNECT_DATA =
               (SERVER = DEDICATED)
               (SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
     13. I concluded that except for the Oracle HTTP Server Service not starting correctly, and that after updating the MFC42u.dll to VC++ SP5 level the stage is set for installing Oracle 9i Mobile Server Release 5.0.1. I copied the MFC42u.dll to the server and registered it successfully.
     14. As Visual Studio 6.0 Professional updates all of the MFC stuff, I decides to install it at this juncture, and apply SP5.
     15. Installed JDK1.3.1 required for Oracle 9i Mobile Server Release 5.0.1
At this time the prerequisites for installing Oracle 9i Mobile Server Release 5.0.1 are satisfied, and MFC, and rt are at version 6.
It is important to note that after installing MS Visual Studio Professional 6.0 SP5, the HTTP server started working. It is clear that prior to installing Oracle Database it is essential that MFC, and possibly other components are upgraded before starting an installation of Oracle. This probably only applies to old NT servers, but it should be mentioned in the installation instructions.
     16. Attempt to install Oracle Mobile Server Release 5.0.1
          a. File locations Screen
               Name: = OraLite501
               Path: = D:\OraLite501
          b. Select Mobile Server at Installation Screen
          c. Mobile Server Repository Database Information Screen
               Hostname = YGGDRASILL = hostname from tnsnames.ora
               Port = 2030 = same as Database port
                    It is troublesome that the port in tsnames.ora is 1521, and not 2030 as was specified in the database install. I will try this port on the reinstall. On the retry, it worked. The problem was that I was mislead by the default port of 2030 at the database install. The database was actually installed on port 1521, and I was not given an error message, or warning. As I am a first time installer of Oracle products this threw me for a loop. The default port for the database needs to be 1521, if regardless of what the user specifies for a port you are going to install on port 1521.
               Net Service Name = FIA.YGGDRASILL.CFR.MSSTATE.EDU = Global database name as required by installation instructions.
          d. Yes. At Do you want to install the Mobile Server Repository question.
          e. At Oracle Protocol Support, I checked the SPX box.
          f. Summary, and Install screens function to specifications.
          g. Mobile Server Repository Wizard
               Database System password:
                    Password = phwphw
          h. Mobile Server Repository Wizard
               Schema Name: fiafield
               Password : fiafield
          i. Success at last with the install part. The problem was the wrong port number. See my above comments on this problem, and how Oracle could grease the skids for the next first time installer.
     j. I could not find the httpd.conf file in the place the install instructions said it should be for running the Mobile Server in Oracle HTTP Server. Since only one copy of httpd.conf existed, I added the include D:\OraLite501\mobile\server\bin\wtgias.conf to the bottom of the file assuming that it is the correct one. I the re-booted instead of using apache -k restart. The Oracle HTTP Server started, so there is hope. The install instructions state that the httpd.conf file would most likely be in the program files directory, when they are really installed in the Oracle Lite home directory.
     k. According to the documentation the Mobile Server should start when the Oracle HTTP Server starts with the wtgias.conf file added to the httpd.conf file. It does not. If I use Process Explorer, I know that Apache loaded the wtgias.conf, because both Apache.exe processes that are running have the wtgias.dll loaded. The facts are at this stage of the game are
          1. OraMTSRecoveryService is started
          2. OracleOraHome92HTTPService is started
          3. OracleOraHome92Listener is started on port
          4. OracleServiceFIA is started
          5. Apache.exe has the wtgias.dll loaded
          6. The Moble Server is not running and it should be if the documentation is correct.
          7. If I start the Mobile Server either as a service using wtgsvc -i or with the webtogo command from the DOS prompt, the Mobile Server starts, but when I attempt to log in with the URL http://Yggdrasill:7778/webtogo/startup it inform me the Mobile Server is not started and it is. Figure 3 shows the response I receive from the login attempt.
     l. I finally ran the Mobile Server in total debug mode using the command webtogo -d0", and it gave me the subtle hint that the correct URL is
          http://Yggdrasill.cfr.msstate.edu/webtogo/startup.
     When I use the above URL and I can login to the Mobile Server with UN = fiafield, and PW = fiafield. I was confused by the documentation. I was under the assumption that the host address would be either http://Yggdrasill:7778, or http://Yggdrasill:4443. After all when I, installed Oracle Database these URLs were listed. It needs to be made clear in the installation guide for the mobile server that the Mobile Server address is http://Your servers WWW address/webtogo/startup, and the statements about the Mobile Server will start when the Oracle HTTP Server is started needs to be removed since they are incorrect. Also, the documentation should clearly state that the Schema Name, and Password given in the Repository Wizard Screen are synonymous with the username, and password for the Mobile Server login.
     m. After determning the hard way that the Mobile Server does not start when the the Oracle HTTP Server starts, and that the correct URL is http://Internet address/webtogo/startup = http://Yggdrasill.cfr.msstate.edu/webtogo/startup, I decide to start the Mobile Server as a service with the command wtgsvc -i. After I re-booted, to my surprise, I could not login to the Mobile Server. When I checked the system services, the webtogo service was running. So to give the start as a service thing a fair chance I re-booted again, but obtained the same results. I thus concluded that the Mobile Server will not run correctly as a service. As it turns out my conclusion was wrong. After waiting a few minutes, my login try was successful. The documentation should indicate that after booting it may be a minute or two before the Mobile Server service become available.
     n. After some serious problems with the installer, and the documentation everything is working. I have a green light to go on to the next stage, which is program the handheld to take advantage of the Mobile Server. I will be glad to get back to programming, and am so thankful that I am not a network administrator.
     Appendix
HTTPd.Conf (Abstract only), Apache Setup.txt,
tsnames.ora, and listener.ora.
HTTPd.conf (Abstract only)
# Based upon the NCSA server configuration files originally by Rob McCool.
# Include the Oracle configuration file for custom settings
include "D:\oracle\ora92\Apache\Apache\conf\oracle_apache.conf"
include "D:\OraLite501\mobile\server\bin\wtgias.conf "
     tsnames.ora
# TNSNAMES.ORA Network Configuration File: D:\oracle\ora92\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
INST1_HTTP.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = MODOSE)
(PRESENTATION = http://HRService)
FIA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
EXTPROC_CONNECTION_DATA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
          listener.ora
# LISTENER.ORA Network Configuration File: D:\oracle\ora92\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\ora92)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
(ORACLE_HOME = D:\oracle\ora92)
(SID_NAME = FIA)
          Apache SetupInfo.txt
The following information is available in:
D:\oracle\ora92\Apache\Apache\setupinfo.txt
The HTTP Server can be accessed using the following URLs:
http://yggdrasill:7778
https://yggdrasill:4443

You can find information regarding enabling the iSQLPLUS in the following Oracle manual.
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14357/ch2.htm

Database 9i, and Mobile Server install history

Dear Oracle technical representative:
This TAR started out as a true request for help in solving installation problems with Oracle 9i Release 2 Enterprise Edition, and Oracle 9i Mobile Server Release 5.0.1, but it has turned into a history of frustration with out of date, laconic, and often incorrect, and misleading documentation. As a software developer, I understand that documentation is always out of date, at least mine is. Nonetheless, I must speak my mind while understanding, and sympathizing with your situation.
I struggled through the documentation, and managed to get everything working. While I was doing that, I wrote down the step by step procedure that I used to get Database, and Mobile Server running. By sharing this rough install history with you, it is my hope that it will help prevent others from experiencing the same difficulties that I have had. It has been my observation that when a user has problems installing a trial software package they give up quickly, and do not purchase a copy. It is thus extremely important that the installation instructions, and quick start guide be accurate, attentive to detail, and well written. The first impression is the one that counts.
The Oracle 9i Lite Installation, and Configuration Guide for Windows NT shipped with Oracle 9i Lite Release 5.0.1 definitely requires, and emergency rewrite. It is terribly out of date, inaccurate, and laconic. My guess is that it is a very sloppy rewrite of poorly written 8i documentation. The Oracle 9i Database Installation Guide for Windows is somewhat better. It however should do a better job informing you that before installing onto a old server the Microsoft Foundation Class (MFC), and VC runtime libraries must be up to date. The history describes the trouble with not having the MFC42.dll at version 6. Another corker is that the default port the installer presents is 2030, and not 1521, and that leads to major confusion in the both the Database, and Mobile Server installs.
Thank you for looking at the history. I hope that it will be of use to you when you update your documentation.
Thomas G. Matney
Mississippi State University
[email protected]
(662)325-2791
TAR for Oracle 9i Release 2 Database Enterprise Edition, and Oracle Lite Release 5.0.1 Mobile Server
Installation problems are highlighted in red.
Installation sequence/history:
     1. Installed Windows NT 4.0 Server SP1 on Dell Power Edge 4300 dual x86 server to wipe the slate clean.
     2. Setup TCP/IP, and IPX/SPX networks
          Computer name YGGDRASILL
          Host name = YGGDRASILL
          Domain = CFR.MSSTATE.EDU
          Internet name = YGGDRASILL.CFR.MSSATE.EDU = 130.18.130.225
     3. Installed NT SP3, and Internet Explorer 4.01 from the NT 40 Options Pack CD as the gateway to installing MTS 2.0, and IIS 4.0.
     4. Installed MTS 2.0, and IIS 4.0 from NT 4.0 Optins Pack CD.
     5. Applied NT 4.0 SP6.
     6. Installed Internet Explorer 5.5 as a prerequisite to installing MADAC 2.6.
     7. Installed MDAC 2.6
     8. Installed Paint Shop Pro 7 for capturing error screens.
     9. As previous install errors stated that the ordinal function xxxx could not be found in MFC42.dll, the latest version (6.0.8665.0) of the dll was installed, and registered from MS VC++ SP5. Also I upgraded MSVCIRT.dll, MSVCRT.dll, MSCRT40.dll, and added MSVC60.dll from SP5 to be on the safe side.
According to the installation documents all the prerequisites for installing Oracle 9i Release 2 Database Enterprise Edition are satisfied.
     10. Began install of Oracle Database Enterprise Edition with target parameters:
          Home directory = D:\Oracle\Ora92
          Database directory = D:\Oracle\oradata
          Global database name = FIA.YGGDRASILL.CFR.MSSTATE.EDU
          Port = 2030
          SID = FIA
          SYSTEM Password = phwphw
          SYS Password = phwphw
          SCOTT Password = phwphw
          DBSNMP Password = I left this one unassigned or empty.
          tnsnames.ora entry for remote TCP/IP connection
          a. CD 1 of 3 load
               1. Error writting to MFC42u.dll. Action ignore. A check indicated that MFC42u.dll version did not match the updated version of MFC42.dll. Plan is to update after install. Unicode version of MFC is probably not used by the installer.
          b. CD 1 completed with only one problem, and CD 2 load begins.
          c. CD 2 installed without incident., and CD 3 load begins, and completes without farther problems. The only issue to address at this time is to update the MFC42u.dll.
               HTTP Server URLs
                    http://7778
                    https://4443
     12. Evaluation of install success begins.
          a. Oracle HTTP Service will not start. It is of particular interest that on installs that I do not upgrade the MFC42.dll the Oracle HTTP Service will start correctly, but during the install I get the error message Ordinal nnnn not found in MFC42.dll, and the Oracle MTS Recovery Service crashes during the install. I am caught between a rock and hard spot on this one. See the Figure 1. At the end of this document. I do not need the HTTP Server at this time but I will need it later and this issue must be resolved. It appears that it hangs during startup. I am sorry but I lost the ordinal number nnnn.
          When I try to start the HTTP server from the Programs menu. It Hangs, and does not return an error message. See Figure 2, and the included Apache Setup.txt, the install log, and the HTTPd.conf . The conf, and setup files look OK to me. What is the problem?
          b. All other services start correctly.
          c. Logged into the database as SCOTT on the server with SQL Plus using the connection information:
               FIA.CFR.MSSTATE.EDU =
               (DESCRIPTION =
               (ADDRESS_LIST =
               (ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
               (CONNECT_DATA =
               (SERVER = DEDICATED)
               (SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
          I created some tables, inserted data, and queried for the data. Everthing seems to be working correctly.
          d. Logged in remotely from my AOL account on a dial-up line using Oracle 9i Release 2 Personal Edition installed on my ThinkPad. Every thing tested out as above. I used the connection information:
               FIA.CFR.MSSTATE.EDU =
               (DESCRIPTION =
               (ADDRESS_LIST =
               (ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill.cfr.msstate.edu)(PORT = 1521))
               (CONNECT_DATA =
               (SERVER = DEDICATED)
               (SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
     13. I concluded that except for the Oracle HTTP Server Service not starting correctly, and that after updating the MFC42u.dll to VC++ SP5 level the stage is set for installing Oracle 9i Mobile Server Release 5.0.1. I copied the MFC42u.dll to the server and registered it successfully.
     14. As Visual Studio 6.0 Professional updates all of the MFC stuff, I decides to install it at this juncture, and apply SP5.
     15. Installed JDK1.3.1 required for Oracle 9i Mobile Server Release 5.0.1
At this time the prerequisites for installing Oracle 9i Mobile Server Release 5.0.1 are satisfied, and MFC, and rt are at version 6.
It is important to note that after installing MS Visual Studio Professional 6.0 SP5, the HTTP server started working. It is clear that prior to installing Oracle Database it is essential that MFC, and possibly other components are upgraded before starting an installation of Oracle. This probably only applies to old NT servers, but it should be mentioned in the installation instructions.
     16. Attempt to install Oracle Mobile Server Release 5.0.1
          a. File locations Screen
               Name: = OraLite501
               Path: = D:\OraLite501
          b. Select Mobile Server at Installation Screen
          c. Mobile Server Repository Database Information Screen
               Hostname = YGGDRASILL = hostname from tnsnames.ora
               Port = 2030 = same as Database port
                    It is troublesome that the port in tsnames.ora is 1521, and not 2030 as was specified in the database install. I will try this port on the reinstall. On the retry, it worked. The problem was that I was mislead by the default port of 2030 at the database install. The database was actually installed on port 1521, and I was not given an error message, or warning. As I am a first time installer of Oracle products this threw me for a loop. The default port for the database needs to be 1521, if regardless of what the user specifies for a port you are going to install on port 1521.
               Net Service Name = FIA.YGGDRASILL.CFR.MSSTATE.EDU = Global database name as required by installation instructions.
          d. Yes. At Do you want to install the Mobile Server Repository question.
          e. At Oracle Protocol Support, I checked the SPX box.
          f. Summary, and Install screens function to specifications.
          g. Mobile Server Repository Wizard
               Database System password:
                    Password = phwphw
          h. Mobile Server Repository Wizard
               Schema Name: fiafield
               Password : fiafield
          i. Success at last with the install part. The problem was the wrong port number. See my above comments on this problem, and how Oracle could grease the skids for the next first time installer.
     j. I could not find the httpd.conf file in the place the install instructions said it should be for running the Mobile Server in Oracle HTTP Server. Since only one copy of httpd.conf existed, I added the include D:\OraLite501\mobile\server\bin\wtgias.conf to the bottom of the file assuming that it is the correct one. I the re-booted instead of using apache -k restart. The Oracle HTTP Server started, so there is hope. The install instructions state that the httpd.conf file would most likely be in the program files directory, when they are really installed in the Oracle Lite home directory.
     k. According to the documentation the Mobile Server should start when the Oracle HTTP Server starts with the wtgias.conf file added to the httpd.conf file. It does not. If I use Process Explorer, I know that Apache loaded the wtgias.conf, because both Apache.exe processes that are running have the wtgias.dll loaded. The facts are at this stage of the game are
          1. OraMTSRecoveryService is started
          2. OracleOraHome92HTTPService is started
          3. OracleOraHome92Listener is started on port
          4. OracleServiceFIA is started
          5. Apache.exe has the wtgias.dll loaded
          6. The Moble Server is not running and it should be if the documentation is correct.
          7. If I start the Mobile Server either as a service using wtgsvc -i or with the webtogo command from the DOS prompt, the Mobile Server starts, but when I attempt to log in with the URL http://Yggdrasill:7778/webtogo/startup it inform me the Mobile Server is not started and it is. Figure 3 shows the response I receive from the login attempt.
     l. I finally ran the Mobile Server in total debug mode using the command webtogo -d0", and it gave me the subtle hint that the correct URL is
          http://Yggdrasill.cfr.msstate.edu/webtogo/startup.
     When I use the above URL and I can login to the Mobile Server with UN = fiafield, and PW = fiafield. I was confused by the documentation. I was under the assumption that the host address would be either http://Yggdrasill:7778, or http://Yggdrasill:4443. After all when I, installed Oracle Database these URLs were listed. It needs to be made clear in the installation guide for the mobile server that the Mobile Server address is http://Your servers WWW address/webtogo/startup, and the statements about the Mobile Server will start when the Oracle HTTP Server is started needs to be removed since they are incorrect. Also, the documentation should clearly state that the Schema Name, and Password given in the Repository Wizard Screen are synonymous with the username, and password for the Mobile Server login.
     m. After determning the hard way that the Mobile Server does not start when the the Oracle HTTP Server starts, and that the correct URL is http://Internet address/webtogo/startup = http://Yggdrasill.cfr.msstate.edu/webtogo/startup, I decide to start the Mobile Server as a service with the command wtgsvc -i. After I re-booted, to my surprise, I could not login to the Mobile Server. When I checked the system services, the webtogo service was running. So to give the start as a service thing a fair chance I re-booted again, but obtained the same results. I thus concluded that the Mobile Server will not run correctly as a service. As it turns out my conclusion was wrong. After waiting a few minutes, my login try was successful. The documentation should indicate that after booting it may be a minute or two before the Mobile Server service become available.
     n. After some serious problems with the installer, and the documentation everything is working. I have a green light to go on to the next stage, which is program the handheld to take advantage of the Mobile Server. I will be glad to get back to programming, and am so thankful that I am not a network administrator.
     Appendix
HTTPd.Conf (Abstract only), Apache Setup.txt,
tsnames.ora, and listener.ora.
HTTPd.conf (Abstract only)
# Based upon the NCSA server configuration files originally by Rob McCool.
# Include the Oracle configuration file for custom settings
include "D:\oracle\ora92\Apache\Apache\conf\oracle_apache.conf"
include "D:\OraLite501\mobile\server\bin\wtgias.conf "
     tsnames.ora
# TNSNAMES.ORA Network Configuration File: D:\oracle\ora92\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
INST1_HTTP.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = MODOSE)
(PRESENTATION = http://HRService)
FIA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
EXTPROC_CONNECTION_DATA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
          listener.ora
# LISTENER.ORA Network Configuration File: D:\oracle\ora92\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\ora92)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
(ORACLE_HOME = D:\oracle\ora92)
(SID_NAME = FIA)
          Apache SetupInfo.txt
The following information is available in:
D:\oracle\ora92\Apache\Apache\setupinfo.txt
The HTTP Server can be accessed using the following URLs:
http://yggdrasill:7778
https://yggdrasill:4443

When you install the MD Workstation you are opted to choose among different applications i.e. mobile sales, mobile service, mobile system maintenance or authorization management tool. You can there choose the application to install besides the installation of the MD Workstation.
If you want to add application(s) later, you have to choose 'modify' and choose all parts for the MD Workstation plus the applications. If you omit options chosen before when doing the first installation then these will be removed. So be shure to choose ALL relevant things for the application as well as for the MD Workstation.
You can also generate the application from the installed repository, there are several notes on this subject available ('how to generate an application') which are referred to in about any installation guide or note changing the msa coding.
Regards Kai

Please help me in setting the Mobile server for mobile filed services

hi,
We want to set the oracle mobile server, Oracle mobile filed service, can any body help out what are the mandatory setups and flow of the setup.
Can you also let me know the list of patch and requried services information too.
Thanks & Regard
Abdul Hafeez Shaik

Thank you Kevin,
I have already gone through this document.
My actual problem is like, After starting the Mobile server when I tried to run this url <url:/portnumber>/webtogo/setup Am getting the webpage with junk values.
What other patch's or what other setups we need to do to have the functionality like when ever we run the above given url it will install the client side software (webtogo + oracle lite database)
Please if you can give me the quick setups which we need to do that would be help full to us.
Best Regards
Abdul Hafeez Shaik

What is the role of BIS server in blackberry?

What is the role of BIS server in blackberry?
i need the answer in detail?
Thanks in advance
Solved!
Go to Solution.

intisar wrote:
BIS refer to blackberry internet service ..it is just like an ISP = internet service provider...
Hello,
Actually, not quite "just like". An ISP provides primary internet connectivity to a computer/network, along with often other services (email, web, and other hostings). Most more recent BBs can, with no BIS-level service and using WiFi only, access the Internet just fine for web browsing and some other services. Further, many can, with just a generic data plan, access the same things via the Carrier Data Network. But, in neither case will any of the BB-proprietary services (e.g., BBM, email, BB Protect, etc.) function at all...all BB proprietary services require subscription to an adequate data plan from the mobile service provider.
There further are many different levels of BIS plans...there are hundreds of carriers in the world, some with dozens of different BB data plans available. Some provide email and social networking only, but no web browsing. Others provide web and internet, but no social networking. And there can be quite a large number of variations given all of the different BB proprietary services. But, in all cases, they are provided by BIS...so BIS itself is the overall umbrella of BB-proprietary services, with the different carrier data plans enabling different mixes of those various available services...it all depends on what the user subscribes to from their mobile service provider.
Hope that helps!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to setup PO approval through Blackberry

Dear SAP Guru and Experts,
Would like to check with you guys out there that can the standard SAP ECC6.0 be configured to approve the PO through Blackberry?
Is there any other module that need to be installed in order to have the PO being approved through Blackberry?
Normally how long (days) will it takes to configure the PO being approved through Blackberry?
Thank you
Regards
Leonard Tan

Hi, Refer below forums it may help,
SAP Workflow approval using Mobile
Offline approval on blackberry device in SRM
http://ecohub.sap.com/api/resource/4dbffe10d2a8cbf8cec86272

BO MOBI with BOE and Mobile server on two separate servers

Hi Experts,
We need to set up a BO MOBI with BOE and Mobile server on two separate servers.
In such a configuration, how does the two servers communicate?
What should be the VAS and VMS server configurations? especially the external hostnames in the files?
We are looking for a non Blackberry(proxy) deployment.
We have installed the software,however the windows services of Authserver and the Job servers are not available in the mobile server instance
Any help would be highly appreciated.

Hi Experts,
We need to set up a BO MOBI with BOE and Mobile server on two separate servers.
In such a configuration, how does the two servers communicate?
What should be the VAS and VMS server configurations? especially the external hostnames in the files?
We are looking for a non Blackberry(proxy) deployment.
We have installed the software,however the windows services of Authserver and the Job servers are not available in the mobile server instance
Any help would be highly appreciated.

MOBI with BOE and mobile server on different servers

Hi Experts,
We need to set up a BO MOBI with BOE and Mobile server on two separate servers.
In such a configuration, how does the two servers communicate?
What should be the VAS and VMS server configurations? especially the external hostnames in the files?
We are looking for a non Blackberry(proxy) deployment.
We have installed the software,however the windows services of Authserver and the Job servers are not available in the mobile server instance
Any help would be highly appreciated.

I figured it out. I had to re-run the schconfig utility on UNIX and reconfigured the server from localhost:9710 to the actual server name.

Oracle Mobile Server 404

Hello,
i have installed Oracle Database 11g, Oracle Weblogic 12c and Oracle Database 11g.
so i configured a mobile domain because i want to sync a database from my android device to the oracle database.
Oracle Mobile Database:
     HOST:     localhost
     PORT:      1521
     SID:     orcl
     Repository:
          Schemaname: MOBILEADMIN
          PW:     ****
     Mobile Server Administrator:
          User: Administrator
          PW: ****
     DEMOSCHEMA:
          NAME: master
          PW: ****
     NEW DOMAIN: mobileserver
     PORT: 7777
I started runmobileserver.bat
and my weblogic with startWebLogic.cmd (localhost:7001/console <-- WORKS)
if i now want to access the admin site of the server i get a 404 error
localhost:7777/mobile
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
please help me.
thank you

Despite many attempts at trying to get an update on this topic I can't seem to get anyone from Oracle to provide any information. I'm now at a critical stage with a new project and would like to know if the Mobile Client will be available for iOS within the timeframes I am looking at. If not, will likely need to look at alternatives which will mean one or more large Mobile Server licences will not be renewed. Surely someone from Oracle on this forum can chime in and give us an update on where this is at?

Oracle Database Mobile Server 11g

Hi,
We implemented Oracle EBS R11i for one of our customers. We also implemented Oracle Mobile Server 9i on Windows Server and Olite 9i on PDAs running Windows.
Now the customer wants to upgrade Oracle EBS to R12 and also upgrade Oracle Mobile Server and Olite 9i to newer versions of Oracle and also want to use Android on the PDAs/Mobile Devices.
Can we implement Oracle Database Mobile Server 11g and Mobile Client as mentioned in these links:
http://www.oracle.com/technetwork/products/database-mobile-server/dms-11g-datasheet-512117.pdf
http://www.oracle.com/technetwork/products/database-mobile-server/overview/index.html
I think it will be a new implementation of Oracle Database Mobile server and Mobile client and not an upgrade.
Any suggestions is welcome.
Regards,
Thiru

MFS embeds Olite into the product. Put another way, through MFS interfaces it defines/determines what functionality of mobile server can be used. Under the MFS configuration the Olite client database is used and the web-to-go app is used, there are no other choices. Very common when a software product includes some other product, it will determine what parts of the embedded product gets used.
Olite 10.3.0.3 as a separately download product used standalone has additional capability. Note: 10.3.0.3 is no longer separately downloadable over OTN.
In DMS 11.x -- we removed Olite client database, rearchitected sync to better fit BDB and allows for BDB and SQLite (either one of those can be used) on the client db. Again, MFS is only compatible with 10.3.0.3/2 right now. That team is a different development team within Oracle, on totally different release schedules than the Database Mobile Server development team. Android support was added in DMS 11.x.
thanks
mike

BO-Cannotconnect to Mobile server through Blackberry[InvalidCredentials]

Similar Messages

Maybe you are looking for