BO Deski with SAP R/3
Dear All,
I have installed BO desktop intelligence in my machine,now i need to make my BO deski to communicate with SAP R/3 since we are using our source as SAP R/3.
Once we started working on the configuration part we understood that BO does allow us to connect with SAP R/3 tier (OLTP) whereas it is allowing us to connect with OLAP i.e BW server.
But i actually want BO deski to communicate with SAP R/3,because this is my actual requirement to build up some reports.
Can anyone pls help me out how to configure BO Deski with SAP R/3 with suitable solutions and links.
Thanks in Advance
Regards
Gomango
Hi,
Desktop Intelligence can not report against SAP R/3.
Ingo
Similar Messages
-
Integration with solution manager 4.0 - service desk with XI ?
Hello Experts,
Does any one know how to integrate the solution manager 4.0 - service desk with SAP XI. I read the solution manager 4.0 service desk web service api, but it only has the XSDs. If any one can provide me any step by step procedure for creating the webservice through this api and publishing it....WILL DEFINETLY BE REWARDED.
Thanks,
Raju.Hello,
I have the same task.
At SolMan side I made:
- released the web service
- Create logical port
- Create HTTP connecto to 3th party ServiceDesk
But I don't understand the "Configure Interface to Solution Manager Service Desk" step.
What was Your problem?
Regards,
Gusztá -
Service Desk with IC WebClient: Category Modeler not available
Hello,
We are currently implementing a Service Desk Application based on SAP Solution Manager. Therefore we are using the article "Implement an ITIL Employee Service Desk with IC WebClient" of "www.CRMExpertOnline".
One of the steps, which are described in the article describes how to Categorize incidents with the Category Modeler. It says that the Category Modeler is available trough BSP Application CRMM_ERM_CAT.
Unfortunately this SAP-Application is not available on our system.
Our System Data:
SOFTWARE COMPONENT RELEASE LEVEL HIGHEST SUPPORT PACKAGE DESCRIPTION
SAP_BASIS 700 0012 SAPKB70012 SAP Basis Component
SAP_ABA 700 0012 SAPKA70012 Cross-Application Component
PI_BASIS 2005_1_700 0012 SAPKIPYJ7C PI_BASIS 2005_1_700
ST-PI 2005_1_700 0005 SAPKITLQI5 SAP Solution Tools Plug-In
SAP_BW 700 0014 SAPKW70014 SAP NetWeaver BI 7.0
SAP_AP 700 0009 SAPKNA7009 SAP Application Platform
BBPCRM 500 0009 SAPKU50009 BBPCRM
CPRXRPM 400 0009 SAPK-40009INCPRXRPM SAP xRPM/cProjects/cFolders 4.00 (ABAP)
BI_CONT 703 0005 SAPKIBIIP5 Business Intelligence Content
ST 400 0012 SAPKITL422 SAP Solution Manager Tool
ST-A/PI 01I_CRM500 0000 - Application Servicetools for CRM 500
ST-ICO 150_700 0009 SAPK-15079INSTPL SAP Solution Manager Implementation Cont
ST-SER 700_2006_2 0003 SAPKITLOK3 SAP Solution Manager Service Tools
Does anybody know where I can find/download the category modeler-application?
Thanks in advance,
AndreasHello Andreas,
The question is that CRMM_ERM_CAT is an application, also a transaction but this is not the name of the associated BSP I think, this belongs to component CRM-PCF more than Solution Manager.
I have seent some messages speakin about to call:
http://server:port/sap/bc/bsp/sap/crm_bsp_frame/entrypoint.do?
appl=CRMM_ERM_CAT
Sorry! I can not tell you more about this, regards,
Dolores -
BO Enterprise with SAP NW AS JAVA as JAVA ApplicationServer ...
Hi All,
we wanted to start a test, using BO Enterprise XI 3.1 with SAP NW AS JAVA ...
our environment :
Oracle 10.2.0.4 as database
SAP NW AS JAVA as JAVA ApplicationServer ( EHP1 )
BO Enterprise XI 3.1 SP2 FIX 2.3
the Web-Applications were successfully deployed and are working very well;
Question :
Does anyone have experiences with this setup ?
Is it possible to use 'Windows AD' Authentication for CMC ?
Are there any guides for BO Enterprise and SAP NW ?
How about SSO (Kerberos) and the BO Web-Applications ?
meanwhile supported or is there any other solution ?
Thank you in advance
Oliverfirst of all, I'm trying to get authentication via "windows AD" working for InfoView;
it's already woking for the Client Tools ( DeskI );
as you now, we are working with SAP NW 7.01 as JAVA Application Server.
instead of the "bscLogin.conf" I created a component in Security Provider with the same name, as in "bscLogin.conf";
I added KRB5LoginModule to this component ( with parameter debug=true );
when I'm trying to logon to InfoViewApp via Domain User I get the error FWM 00006; when password/username matches the AD information I can read the 'Username(at)DOAMIN.DE' in security.log of J2EE; if username/password doesn't match the username can't be read in the security.log file; there's only a "N/A" visible; so I think, a connection to AD was made and the username/password was verified when the username(at)DOMAIN.DE is readable in security.log;
That's what you can see in security log ...
User: username(at)DOAMIN.DE
Authentication Stack: com.businessobjects.security.jgss.initiate
Login Module Flag Initialize Login Commit Abort Details
1. com.sun.security.auth.module.Krb5LoginModule REQUIRED ok true true true
Central Checks
exception Wrong username password combination.#
User: N/A
Authentication Stack: com.businessobjects.security.jgss.initiate
Login Module Flag Initialize Login Commit Abort Details
1. com.sun.security.auth.module.Krb5LoginModule REQUIRED ok exception false Pre-authentication information was invalid (24)#
What does this exception mean ?
" ...exception Wrong username password combination"
BTW:
%JAVA_HOME%\bin\kinit <username>(at)DOMAIN.DE is working ( ticket gets stored in local cache ! )
Do you know what I can do to get this scenario work ?
Thanks and best regards
Oliver -
De-link PPM Item with SAP Project
Hello,
Can somebdoy throw a light on what to do in case I want to de-link a PPM-item with SAP project.This situation may rise if I want to change the project actuals going to bucket A to bucket B.As I can not change the relationship of an item with the bucket, I am looking for alternate solution where I can de-link SAP Project with SAP PPM item.
thank you!
Regards,
MahendraHi Mahendra
If you are meaning to de-link a PS Project from a PPM Item, you can from the Item navigate to the 'Relationships' tab and then on the 'object links'sub-tab select and delete the assignment:
You can also remove a cProject relationship by clicking the 'Related Objects' sub-tab
Your comment that you cannot move an Item to a new Bucket - is this because your business process does not allow you to do so? Because this is definitely possible in the system.
Let me know if you have any further questions as I am not sure I have addressed your question
Regards
C -
Log on to Infoview with SAP authentication
Hi Gurus ,
Please can some one provide me documentation , to configure , Infoview with SAP authentication .
I have R/3 system where i have a datasource and then one Remote cube in BW . On the cube developed a BEx Query . I want to log into Infoview using SAP authentication .Now, i am able to login into Infoview using Enterprise as authentication .
Thanks ,
Madhu .Hi Madhu,
You can go to help SAP and download the BusinessObjects SAP Kit manual, here is the link for SAP BusinessObjects products. [http://help.sap.com/content/bobj/bobj/index.htm]
Link for BusinessObjects XI Integration for SAP Installation Guide (XI3.1SP2) [https://websmp105.sap-ag.de/~sapidb/011000358700000843912009E/xi31_sp2_bip_sap_install.pdf]
Link for BusinessObjects XI Integration for SAP User's Guide (XI3.1SP2) [http://help.sap.com/businessobject/product_guides/boexir31SP2/en/xi31_sp2_bip_sap_user_en.pdf]
I hope this help you.
Best regards,
Fede -
Issue with SAP Single Sign-On and Scheduling Reports
Hello --
We are on XI 3.1 with SAP BW and SSO. Some users are getting failures with this error message when they schedule a report to run:
"A database error occured. The database error text is: Unable to connect to SAP BW server System received an expired SSO ticket. (WIS 10901)."
It SEEMS as though the users are fine if they schedule the report to run immediately and have it run every hour (or less) after that. If they schedule it to run several hours from the time they are in the system, however, it looks like they begin getting failures around 8 hours after they were in the system. This would make sense from looking at the "InfoView and Central Management Console Session Management" document (https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/405547f9-b840-2b10-44b5-8e17ff9e48a9&overridelayout=true) since a logon token expires after 8 hours, but since it is a scheduled report, and the user is not logged in through a browser, how is a token being passed? Is it captured and included when the report is scheduled? Would disabling logon tokens fix this issue? How is authentication handled here if they are disabled?
Thanks for any info
CaseyHi Gurus
I am facing the exact same error.
However, we are not trying to schedule the WEBI report.
The user gets this error even when he is running on demand from the portal.
Here are the various steps tha twe have tried and still it doesnt work:
1) Refreshed and created new Universe connection
2) Bounced BOE server
3) Synced up the SSO timeout ticket to 8 hrs on all systems including BOE
4) Changed browsers
5) Removed cache, cookies etc
Please help. -
SSO with SAP logon tickets to non-SAP web app
I am trying to implement SSO to an oracle portal based web application using SAP logon tickets, but can't seem to find a way for it to work. I thought maybe it would be a web server filter, but am unsure if this would work for oracle portal. Anyone tried similar?
CindyHi Cindy,
If it is EP6 SP2 probably you can checkout the following document.
http://service.sap.com/ep60
Go to Documentation Help>How-To-Guides>Current How To Guides section.
checkout the following how to guide.
Perform Cross Domain SSO with SAP Logon tickets zip file.
If you want the zip file please send an e-mail to
[email protected]
Regards
-Venkat Malempati -
Performance issues with SAP BPC 7.0/7.5 (SP06, 07, 08) NW
Hi Experts
There are some performance issues with SAP BPC 7.5/7.0 NW, users are saying they are not getting data or there are some issues while getting data from R/3 system or ECC 6.0. Then what things do I need to consider to check, such as what DataSources or Cubes I need to check? So, how to solve this issue?
What things I need to consider for SAP NW BI 7.0 u2013 SAP BPC 7.5 NW (SP06, 07, 08) Implementation?
Your help is greatly appreciated.
Regards,
QadeerHi,
New SP was released in February, and now most of the new bugs should been caught ,This has a Central Note. For SP06 it's Note 1527325 - Planning and Consolidation 7.5 SP06 NetWeaver Central Note to fix any issues. Most of the improvements in SP06 were related to performance, especially when logging on from the BPC clients.There you should be able to find a big list of fixes/improvements and Notes that describe those. Some of the Notes even have test description how to reproduce that issue in the old version.
hope this will help you
Regards
Rv -
Read IDOC WMMBID02 information and compare inventory data with SAP
Hi All,
Here is an explanation of the issue:
I need to read the data from an inbound IDOC, status 64, of standard type WMMBID02 and message type WMMBXY. I do not want to post the IDOC, but only read the IDOC information which is mainly the material number, batch, status(INSMK), quantity and unit. This data I have to compare with SAP data and see if it is same for the selected material numbers. Now to read and process the inbound IDOC we have a program RBDAPP01 (BD20 Transaction) which calls the process code WMMB (WE42 transaction) which in turn calls the function module L_IDOC_INPUT_WMMBXY. This FM posts the IDOC. I have created a function module with the same import, export and tables parameters like this FM and have attached it to a custom process code ZWMMB. This function module should just read the data of the IDOC and put it in the table TB_IDOC_DATA like EDIDD (IDOC data records). I then loop into this table, extract SDATA and split it into the 3 segments of WMMBID02 and then extract my required data, MATNR, CHARG, INSMK, MENGE & MEINS.
My Question:
How do I trigger the process code ZWMMB so that I can read the IDOC data when it is fired (status 64), just like program RBDAPP01. Is there any standard code that can be copied and modified or how to do it???
I have tried to be very clear with the question, please reply if the question is not clear. If I am clear, please help
Thanks AnirbanI am able to read the contents of the IDOC, but I need to run the FM when I fire the IDOC of message type ZWMMBXY. I have created a custome FM which will behave as a stndard FM for inbound IDOC processing.
-
Will MIM (Merchandize and inventory management) work with SAP AFS / SAP POS
We are implementing SAP AFS ERP at the head office and SAP POS at the retail stores.
We want to implement the MIM module for inventory management at retail store level. Does MIM work in conjunction with SAP AFS. A consultant was suggesting that MIM works only with SAP Retail and no other vertical SAP solution.
Can someone please clarify?
Regards
paddyMIM is linked to IS Retail, not to AFS.
Nevertheless, you can always link and AFS and a Retail system. SAP provides a very convincing ALE scheme for this.
Eric -
SAP Sourcing 7.0 integration with SAP ERP - issue with SAP PI
Hi All,
We are integrating SAP Sourcing 7.0 with SAP ERP 6.0 with SAP PI 7.1 in middle. So the Sourcing will talk to PI and this intern will talk to ERP. Sourcing is on oracle 11g where as PI and ERP are on SQL 2008. All these 3 are on windows 2003 x64.
We are following the "Configuration Guide Integration of SAP ERP and SAP Sourcing 7.0" provided by SAP.
We have successfully configured Sourcing and PI systems as pe the document. In Sourcing, by using background jobs we are able to successfully generate files in "export" folder which is part of FTP directory.
However the issue is with PI, we configured the "configuration scenerio" in Integration builder and point all channels to the FTP folder in Sourcing. But PI is not picking up these files.
Is there any way to trigger this in PI system. Or do we need to do anything in sourcing itself.
Regards,
Siva.Hello Siva,
I am thinking that you may need to deploy FTP adapter in PI to get this process work fine but not sure.
Let's see what other experts suggest.
Thanks,
Siva Kumar -
How to use CMS Users with SAP BOPC NW 7.5
Hello,
I have problems importing and using CMS Users with BO PC 7.5 NW.
I am trying two types of CMS-users
1. CMS Enterprise Users created in CMS and using "Enterprise" authentication
2. SAP BW Users imported into CMS using their SAP authentication "secSAPR3")
but both don't work:
In the BOPC Admin Client, I can succesfully select Security->Users->"Add new Users". Both CMS "Enterprise Users" and CMS Users that use SAP authentication are displayed in the "Everyone" Group.
The CMS Enterprise Users are displayed as <username>, e.g. "Miller".
The CMS users with sap authentication are displayed as <SAPSystem><Client>/<SAPusername>, e.g. "KBE100/Smith".
Now If I try to import a user...
1. CMS Enterprise Users
If can successfully import CMS Enterprise Users and add them to the ADMIN Team, e.g. "Miller".
The problem is they can't be used to log in to the Admin Client and Excel Client:
E.g. I enterUser-ID "Miller" and his CMS-Enterprise-password under password after starting Excel Client, an error message shows up: "The UserID, Password or Domain cannot be authenticated. Go back and make sure you entered valid credentials" ... (same error message as if the user wouldn't exist/wrong pw.).
Seems the user wasn't added as BO PC user. Or do I need to use any prefix before the "user ID" for CMS Enterprise users in the User_ID field instead of just "Miller"?!
2. CMS Users which use SAP-authentication (users imported into CMS from BW and use SAP-authentication)
In the BO PC Admin Client, I can't import them: I go through "1. User Setup" select "KBE~100/Smith", "2. User Detail", "3. Assignments", but if I am in "4. Finish" and click on "Apply", the following error shows up:
"Failed to create directory \root\Webfolders\<AppSetName>\<Appname>" for "KBE~100/Smith".
My guess is that the operating system doesn't like the "/" in the Username - but I guess this can't be changed bc. these Users from CMS and are already displayed with the "/" between SAPSystemID~ClientNummer and username in the User-list in BOPC Admin Client!
side remark: if I create a SAP CMS Enterprise user which contains a "/" in the username (on pupose ), I am getting the same error message.
Any help, explanations and workarounds are greatly appreciated - Any solution will be awarded with maximum points!
Best Regards and thanks a lot for your help!Hi Florian,
The problem seems indeed the file system on the bw not being able to handle "/". The automatic user import from the bw role into the CMC does not give you an option to replace the "/" character with anything else.
This should solve it:
- Go to the CMC double click the user. Delete the server part "KBE100/" and click save. Make sure the default system is set to "KBE100". The user should now be able to login from BPC with the user Smith.
Good luck,
Martin -
How to get web application to use Tuscany without conflicting with SAP SDO
Hi,
We are attempting to run a web application on SAP NetWeaver CE 7.1 SP1 which uses Tuscany SDO. As it now stands We must use Tuscany because the web application will not run with the SAP SDO implementation provided by Netweaver. To ensure that Tuscany is loaded with priority, we have packaged the Tuscany JAR files and their dependencies as a heavy resource, as described here:
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60642a88-95fe-2b10-d387-a245d48fc257?overridelayout=true
The final check showed that Tuscany was correctly deployed as a heavy resource and included the following JAR files:
common-2.2.3.jar
ecore-2.2.3.jar
ecore-change-2.2.3.jar
ecore-xmi-2.2.3.jar
tuscany-sdo-impl-1.1.1.jar
tuscany-sdo-lib-1.1.1.jar
tuscany-sdo-tools-1.1.1.jar
xsd-2.2.3.jar
We also verified that the web application using Tuscany has a hard reference to the Tuscany heavy resource.
However, when we try to run the web application, the following error is logged: java.lang.LinkageError: Class commonj/sdo/DataGraph violates loader constraints
The issue is definitely due to some kind of classloading conflict with the SAP SDO library, as the application runs normally when SAP SDO is manually removed from the classpath. Doing this on a production system is unfortunately not an option, though.
So the question is: how to get web application to use Tuscany without conflicting with SAP SDO?I took a look at the "printerReady" example. Looks like I may be able to use the InetPing (...) function to ping through a range of IP addresses looking for a response.
Any ideas on how to find the MAC address associated with the IP addresses that respond?
We may have multiple units responding and the MAC address will allow the operator to determing which unit to connect to.
I'll try the InetPing to see how it works,
Kirk -
App-V 5 SP1: Error with SAP GUI 7.3
Hallo!
We work on a project to use SAP GUI 7.3 with latest fixes with App-V 5. This works fine so far with the exception of only one transaction in SAP - SWDD. This windows shows no icons on top. After waiting for a while this transaction stops working and SAP
GUI crashes. SAP support says it's an error with App-V. So we tried to find some error with process monitor. We are able to see many of these errors:
Date & Time: 19.11.2013 11:02:26
Event Class: Registry
Operation: RegOpenKey
Result: NAME NOT FOUND
Path: HKU\S-1-5-21-1393060369-1102717077-1881041405-25977_CLASSES\AppV\Client\Packages\4782139E-FD11-4C4D-84FB-57E849A8B823\Registry\Machine\Software\Classes\CLSID\{3BE786A0-0366-4F5C-9434-25CF162E475E}\ExtendedErrors
TID: 10504
Duration: 0.0000049
Desired Access: Maximum Allowed
Date & Time: 19.11.2013 11:02:31
Event Class: Registry
Operation: RegEnumKey
Result: BUFFER TOO SMALL
Path: HKCR\CLSID\{3BE786A0-0366-4F5C-9434-25CF162E475E}\ExtendedErrors
TID: 10504
Duration: 0.0000021
Index: 0
Length: 0
Date & Time: 19.11.2013 11:02:31
Event Class: Registry
Operation: RegOpenKey
Result: NAME NOT FOUND
Path: HKLM\SOFTWARE\Microsoft\AppV\Client\Packages\4782139E-FD11-4C4D-84FB-57E849A8B823\Versions\E7BFC8A3-BB43-4739-A7A8-604AA3A68E84\Registry\Machine\Software\Classes\CLSID\{3BE786A0-0366-4F5C-9434-25CF162E475E}\ExtendedErrors
TID: 10504
Duration: 0.0000123
Desired Access: Maximum Allowed
There are hundreds of these entries. What are these NAME NOT FOUND errors? Did anyone of you successful sequence SAP Gui 7.3 with App-V 5?
Thanks for help.
DietmarHello,
See this topic which explains BUFFER TO SMALL.
http://blogs.technet.com/b/markrussinovich/archive/2005/05/17/buffer-overflows.aspx
The Name not found indicates that it is looking for a registry key (location is the path) and not finding it. That may not be a problem, as it usually traverses multiple locations (HKCU and / or HKLM, native and virtual..).
First question is;
On a machine with SAP installed natively - is there an entry named;
HKLM\Software\Classes\CLSID\{3BE786A0-0366-4F5C-9434-25CF162E475E}\ExtendedErrors
or
HKCU\Software\Classes\CLSID\{3BE786A0-0366-4F5C-9434-25CF162E475E}\ExtendedErrors
If yes, does it exist in the package?
Nicke Källén | The Knack| Twitter:
@Znackattack
Maybe you are looking for
-
Emails from Outlook MS 2007 View as an Image not HTML
I am trying to find out why my emails that I create in Outlook 2004 as an HTML are recieved by Macbooks and other mac computer (LION and above) as an image file. This creates a problem for Mac users at my company. I need them to be HTML because there
-
Can't get acrobat 9 pro to load as part of CS5 suite for mac
I had to reinstall the full CS5 package, and I had no issues reinstalling Indesign, Photoshop and Illustrator from the original disks, but when I insert the AA9 Pro disk, it *appears* to download, and I'm able to open it, but as soon as I eject the d
-
Abap Error CALL_FUNCTION_WAIT_ERROR in program SAPMSSY1
I am getting abap error " CALL_FUNCTION_WAIT_ERROR ". The termination occurred in the ABAP/4 program "SAPMSSY1 " in "REMOTE_FUNCTION_CALL". The main program was "SAPMSSY1 ". The termination occurred in line 69 of the source code of program "SAPMSSY1
-
Hi, we have some documents sotored in DMS(Document Management service) now they need to be moved to CMS(Content Mangement Service) I Really I dont know what is DMS and CMS.I have searched in the forum but the information is not sufficient for me so
-
My iPhone maps app has been acting strangely today (08 January 2010). I live in Madison, WI, and when driving around today and using my iPhone 3GS Maps using 3G/GPS (no wireless connection), my iPhone put me about a hundred miles to the north in Neen