BO Mobile url gives error with hostname

Dear All,
We had done the BO Mobile installation for DEV Landscape and it is compelted without any errors.
Now when we are testing the URL with the localhostname it is working fine and gives result.
But the same url with the PUBLIC IP Address(Hostname is not yet finialized) is giving time out error.
Do I need ot define the public ip/host name any where is Tomcat Configuration or is it due to any network/hostname configuration issue.
Any idea please suggest.
Thanks & Regards,
S Kumar

Hi Kumar,
it seems that your connections are fine, as you are able to connect using localhost.
however, if using public IP it is trying to time out, may be because, it is either failing to resolve the external to internal IP ( NAT ) or proxy settings can cause the problem with public IP.
Check with your network Admin, if you are able to use public ip and open http://publicip:8080 from your ipad?
Regards,
Atul B

Similar Messages

  • Discover Plus works with internal IP, Gives error with External IP

    Oracle 9i Discoverer plus works with internal IP but when I try to access using the external IP it gives error while trying to load workbook wizard.
    Error : Unable to Connect to Discoverer Application contact Administrator

    Hi Sree
    Well a virtual host will certainly help working with a firewall its may mode of operation is to allow a different IP and / or DNS URL to work.
    Are you sure the virtual host you added is the correct one as per what you want to do? I ask because you may have one in there for a different reason.
    As I mentioned earlier though, whilst I am happy to contribute and try to help I am by no means an expert in doing what you are trying to do. I've always thought that changing a name like this would involve a re-install of the server which is something I believe you are trying to avoid. Personally I don't recall seeing a situation like yours work without re-installing which is why I encouraged you to speak with Support.
    Best wishes
    Michael

  • HT4436 my massage alway give error with the server try again later help

    someone know how strigh forward reset massage and fix error with the server????
    help

    See http://support.apple.com/kb/TS3970?viewlocale=en_US&locale=en_US - maybe it can help solve your problem.
    Clinton

  • 2032 http error with hostname in the url in the Android alone

    I get 2032  error , when I send a http request to the server.I get the error only in the android phone that too when I append the url with the hostname.
    If the send the request with the Ip address, it works fine in the android, but with the host name I get the error.
    Can you help me with the error

    I've called the big guys to help you. Good luck.
    Is the problem there if you log in as "just a user" ?

  • Consuming Websphere Portlets in spaces using WSRP WSDL url gives error.

    Sr#3-6516739281
    Ver- 11.1.1.6.0 spaces.
    Hi ,
    Customer consuming a websphere portlets in spaces
    Producer: Websphere portal server
    Consumer - Webcenter spaces 11.1.1.6.0
    WSDL url - http://192.168.0.50:9080/producer/wsdl/wsrp_service.wsdl
    WSRP 2.0 portlets hosted on IBM WebSpere application server (v. 7.1) are not rendered at all in spaces. Registration part goes fine and when click the test button after registration it says successful.
    but when we go the spaces page the portlet is not rendered and says - Portlet consumer error and the following stack trace traced in spaces server logs .
    The thrown exception is:
    <3-Dec-2012 4:21:33 o'clock PM EST> <Error> <oracle.portlet.binding> <BEA-000000> <An error has occured for Portlet Binding portlet2581387127.
    oracle.adf.model.portlet.binding.PortletModelException: Unable to get portlet response (Internal Error) for portlet binding portlet2581387127.
         at oracle.adf.model.portlet.binding.PortletBinding$InnerPortletModel.getPortletRendition(PortletBinding.java:1476)
         at oracle.adfinternal.model.portlet.binding.ActivityPortletModelWrapper.getPortletRendition(ActivityPortletModelWrapper.java:151)
         at oracle.adfinternal.view.faces.renderkit.rich.portlet.PortletRenderer.encodeAll(PortletRenderer.java:916)
         at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
         at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
         at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
         at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:405)
         at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2633)
         at oracle.adfinternal.view.faces.renderkit.rich.customizable.PanelCustomizableRenderer.encodeChildrenVertically(PanelCustomizableRenderer.java:1039)
         at oracle.adfinternal.view.faces.renderkit.rich.customizable.PanelCustomizableRenderer.encodeAll(PanelCustomizableRenderer.java:350)
         at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
         at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
         at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
         at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:405)
         at org.apache.myfaces.trinidad.rend
    This works fine in .net and other consumers.
    Please see the screen shots attached to SR-
    WCP_PortletProducerRegistration.png - registration screen in spaces
    WCP_Error.png - Error when try to see the portlet in spaces page.
    WC_Spaces.out -logs with the above error.
    We also tried to register this is Jdevelooper. This gives different error in registration it self.
    screen shot- JDeveloper-WSRPProducerRegistration.docx
    Please shed some light on this to proceed further.

    Sr#3-6516739281
    Ver- 11.1.1.6.0 spaces.
    Hi ,
    Customer consuming a websphere portlets in spaces
    Producer: Websphere portal server
    Consumer - Webcenter spaces 11.1.1.6.0
    WSDL url - http://192.168.0.50:9080/producer/wsdl/wsrp_service.wsdl
    WSRP 2.0 portlets hosted on IBM WebSpere application server (v. 7.1) are not rendered at all in spaces. Registration part goes fine and when click the test button after registration it says successful.
    but when we go the spaces page the portlet is not rendered and says - Portlet consumer error and the following stack trace traced in spaces server logs .
    The thrown exception is:
    <3-Dec-2012 4:21:33 o'clock PM EST> <Error> <oracle.portlet.binding> <BEA-000000> <An error has occured for Portlet Binding portlet2581387127.
    oracle.adf.model.portlet.binding.PortletModelException: Unable to get portlet response (Internal Error) for portlet binding portlet2581387127.
         at oracle.adf.model.portlet.binding.PortletBinding$InnerPortletModel.getPortletRendition(PortletBinding.java:1476)
         at oracle.adfinternal.model.portlet.binding.ActivityPortletModelWrapper.getPortletRendition(ActivityPortletModelWrapper.java:151)
         at oracle.adfinternal.view.faces.renderkit.rich.portlet.PortletRenderer.encodeAll(PortletRenderer.java:916)
         at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
         at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
         at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
         at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:405)
         at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2633)
         at oracle.adfinternal.view.faces.renderkit.rich.customizable.PanelCustomizableRenderer.encodeChildrenVertically(PanelCustomizableRenderer.java:1039)
         at oracle.adfinternal.view.faces.renderkit.rich.customizable.PanelCustomizableRenderer.encodeAll(PanelCustomizableRenderer.java:350)
         at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
         at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
         at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
         at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:405)
         at org.apache.myfaces.trinidad.rend
    This works fine in .net and other consumers.
    Please see the screen shots attached to SR-
    WCP_PortletProducerRegistration.png - registration screen in spaces
    WCP_Error.png - Error when try to see the portlet in spaces page.
    WC_Spaces.out -logs with the above error.
    We also tried to register this is Jdevelooper. This gives different error in registration it self.
    screen shot- JDeveloper-WSRPProducerRegistration.docx
    Please shed some light on this to proceed further.

  • Reed solomon VI gives error with higher values of n and k.

    I am receiving the error message "Error -21872 occurred at mod_Validate RS code prms.vi"  
    If I use n = 15 and k = 11, it works fine. But if I use n = 64 and k = 32, it does not work and gives above mentioned error.
    Can anyboody guideme how to fix it.
    See attached VI for further details.
    Attachments:
    RS_Encode_V2.vi ‏17 KB

    This is a repeat post. The original post is located here, and has already been answered.
    Matthew R.
    Applications Engineer
    National Instruments

  • 0COMP_CODE gives error with 0CURRENCY in RSECADMIN

    We have created Analysis Authorization and secured the Infoprovidors through company code (0COMP_CODE). All was working well since last week. Now yesterday some change was made to the infoobject 0COMP_CODE and the Analysis Authrorizations are not working. In RSECADMIN when you try to pull up the company codes in the 0COMP_CODE infoobject it gives me a strange error which says "Please enter a valid value for characteristic 0CURRENCY ". Please let me know if anybody has any idea about how to fix this error.
    Message was edited by:
            karthik kiran
    Message was edited by:
            karthik kiran

    Hi,
    try to upload the global settings via rsa1->infosources, right click on your infosource and select transfer global settings. After that, try to reload.
    regards
    Siggi

  • Barcode gives errors with characters

    When i populate the barcode with numbers on,y it is fine.
    But when i add a character it says "Invalid barcode value........is an invalid value for barcodes of type code30f9"
    Any ideas???? Thanks

    The 3of9 barcode is good for letters, numbers and a few symbols (but not all of them).
    http://en.wikipedia.org/wiki/Code_39
    These are the only characters.
    -, ., $, /, +, %, and space
    And the * character must be used as the first and last one in the field.
    *$123A-BC 45.67*

  • Mobile Url for a site gives an error

    when i try to access the mobile site of a SharePoint 2010 site it gives me the following error: 
    <input name="__EVENTARGUMENT" type="hidden" />   Error
    Object reference not set to an instance of an object.
    The mobile Url contains _layouts/mobile/mblwiki.aspx this site has wiki feature enabled 

    Hi Omar,
    According to your description, my understanding is that the error occurred when you access the mobile URL for SharePoint site.
    I recommend to append "?Mobile=1" to the end of the URL of the SharePoint site
    to access the mobile view to see if the issue still occurs, such as
    http://MyServer/MySite/default.aspx?Mobile=1.
    If the error still occurs, I recommend to check if the mobile view is activated for SharePoint.
    http://technet.microsoft.com/en-us/library/ff393832(v=office.14).aspx
    More reference:
    http://msdn.microsoft.com/en-us/library/office/ms462572(v=office.14).aspx
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • RE: [Adobe Reader] when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? i

    HelloThank's for your helpsI hope this document is helpfulBest Regards,
    Date: Sun, 22 Jun 2014 17:10:17 -0700
    From: [email protected]
    To: [email protected]
    Subject:  when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help me th
        when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help m
        created by Anoop9178 in Adobe Reader - View the full discussion
    Hi,
    Would it be possible for you to share the document?
    Regards,
    Anoop
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6485431#6485431
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
         To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Adobe Reader by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

    thank's for reply and your help
    i did the step's that you told me but  i still have the same problem
                                     i have the latest v.11.0.7
    i
    i disable the protected mode

  • When i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help me th

    when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ?
    if you can help me thank's
    [email address removed by host]

    thank's for reply and your help
    i did the step's that you told me but  i still have the same problem
                                     i have the latest v.11.0.7
    i
    i disable the protected mode

  • "Source not found" Error creating URL Data control with query parameters

    Hi,
    I have a restful service for which i want to create a URL data control. I am able to create the URL data control successfully when i am not passing any parameters in the Source field. But if i am specifying the parameters in the source field like this Department=##ParamName##, something weird is happening. After giving the param string in the Source field, it asks for default param value to test the url. It tests the url successfully. After that i select XML as the data format in which i am mentioning the xsd like this . "file:///C:/..../something.xsd" . And this is when i am getting the error. "Invalid Connection. The source is not found". I am giving exactly same path for xsd which i gave while creating URL data control without query parameters. Infact i was able to create the URL data control with query parameters successfully till afternoon. after that it started giving me this error all of a sudden. Infact as soon as i was able to create a URL data contol with query parameter successfully, i took a backup of the application before moving further. But even that backup is not working now.
    As far as i understand, i dont think there will be any change in xsd if query params are passed to a web service. Please correct me if i am wrong.
    Just dont know what could be the issue. Please help
    Thanks

    Hi,
    xsd is used for the URL service to know what the returned data structure is so it can create the ADF DC metadata
    Frank

  • HT201210 When I Restore My iPhone with itunes gives error -1 will end of the Installing  firmware

    When I Restore My iPhone with itunes gives error -1 will end of the Installing  firmware
    what is the problem ?

    Error -1 generally indicates a catastrophic hardware failure. 
    You'll need to bring your phone to Apple for evaluation

  • When I Restore My iPhone with itunes gives error -1 will end of the Installing  firmware

    When I Restore My iPhone with itunes gives error -1 will end of the Installing  firmware

    Error 1 means, as the link that Chris gave you says, that your phone is either jailbroken or damaged.
    It can also mean that your antivirus is blocking the update, but this is rare. Try disabling your antivirus if your phone is not jailbroken. If that doesn't resolve the problem you need to get the phone fixed or replaced.
    If the phone IS jailbroken you have just learned why you should not hack an iPhone. And you will have to go somewhere other than an Apple-hosted forum for help.

  • ITunes gives error code -54 when sync with my iphone 5

    iTunes gives error code (-54) when i try to sync with my iphone5

    I am having the same issue. Since updating to iTunes 11 my iPhone 5 will no longer wirelessly sync. I am operating the latest version of Mountain Lion on a two month old Macbook Pro. When I plug in the USB I go through the steps of making sure the box is clicked to Wireslly sync, but after a few minutes of un-plugging the cord my phone dissapears from my devices. It tries to locate it, but cannot.
    Furthermore, when I launched iTunes 11 for the first time my phone was synced, but since I accidenttly hit the eject button in the top right, this button has yet to come back. Even when the iPhone is linked via USB. Am I Crazy, stupid, or is this a bug?
    BTW, how did MrTrav15 have this problem on 10/17 a month-and-a-half before the launching of iTunes 11?

Maybe you are looking for