BO - Problem to connect through windows client

Server OS: Windows Server 2003 SP2
BOE Version: XI Release 2
Client SO: Windows XP Professional SP2
DB: Oracle 10 v 10.2
Problem:
I have a BOE XI Release 2 installed on a server and if I try to connect via WEB everything is perfect but when I try to connect using windows clients (Designer, DESKiu2026)
I am getting the following error:
" No se puede acceder al repositorio. (USR0013)"
u201C[repo_proxy 13] SessionFacade::openSessionLogon with user info has failed(Error en el transporte: Fallo en la comunicación.(hr=#0x80042a01)u201D
I'm using the standard port which is the 6400.
I hope your comments.
Thanks!

Hi,
Are you using any authentication ?
If you are using LDAP, then try this...
Symptom
Error logging onto Desktop Intelligence or Designer using LDAP authentication:
"(USR0013) [repo_proxy 13] SessionFacade::openSessionLogon with user info has failed (The LDAP authentication could not log you on.) Verify your logon information. If your account is under a different domain as o=u2026, please enter your dn (hr=#0x80042a01)."
Reproducing the Issue
Configure LDAP authentication
Error appears from a client computer running Desktop Intelligence or Designer
Logon to Desktop Intelligence or Designer on the server works
Cause
LDAP authentication from the client connects directly to the LDAP directory without passing the CMS
The server has been configured on the firewall, but not the client computer
Resolution
Configure the firewall for the client machines to pass, so that they can reach the LDAP directory

Similar Messages

Facing problem in connection with OWB client

Dear All
Greetings!!!
Im new to Datawarehouse building. I have installed OWB R1 at my own pc.I am facing problems in connecting OWB client..What exactly to put in Host name and Oracle Service name. i am logging in with the same system/password with normal login. Please guide me to enter in the datawarehouse world..
Thanx and Regards
Nukesh Bhoyar
Mumbai(India)

Hi Nukesh
I know this doesn't really answer your question but Oracle have just made Release 2 of Warehouse Builder available and based on all of the info through this forum and other places, if I was you I would download R2 and install it instead of R1, as it is deemed to have way more functionality.
Cheers
M

Howto connect a windows client oracle on a linux serveur 9i

Hi all,
I just want help for connecting one windows (2000 Pro) oracle client to a linux (Red Hat 8) oracle serveur. Thanks for all

Well, the first step is to configure TNS. The Net Configuration Assistant will help you there if your DBA hasn't already set things up for you (sent you a tnsnames.ora file, pointed the client at a shared tnsna,es.ora file, set up OID, etc).
Once you can tnsping the database from a command prompt, you can set up your ODBC DSN, assuming you want to use ODBC to connect.
Justin

Problem while connecting through ldap console

hi ,
we have our directory server 5.2 sp4 on red hat linux 4.
i am able to connect through ldap broswer and ldapsearch is working but when i mtrying to connect through console it is saying as incorrect password or directory problem.i m not able to figure out what can be the problem. any help is appreciated.
Thanks
Message was edited by:
ap7926

yes admin server is up and here is the log
- Sun Java(TM) System Directory Server/5.2_Patch_4 B2005.230.0415 (32-bit) starting up
[18/Aug/2007:09:55:11 -0400] - Listening on all interfaces port 389 for LDAP requests
[18/Aug/2007:09:55:11 -0400] - slapd started.
[18/Aug/2007:09:55:11 -0400] - INFO: 100 entries in the directory database.
[18/Aug/2007:09:55:11 -0400] - INFO: add:0, modify:0, modrdn:0, search:0, delete:0, compare:0, bind:0 since startup.
and here is log from access
conn=37 op=-1 msgId=-1 - fd=30 slot=30 LDAP connection from 192.168.1.43 to 192.168.1.4
conn=37 op=-1 msgId=-1 - closing - B1
conn=37 op=-1 msgId=-1 - closed.

Connection Problem: Can connect through Skype but browsers dont' work

Here's the hardware that I'm working on:
Gateway T-6311 Notebook
Intel Core 2 Duo processor
I have set up an Airport utility on the PC and was able to set up wireless connection to the Airport Extreme with no issues. The problem that I now can only connect to the internet through Skype (I am able to receive files and talk to people), but my browsers Firefox and IE are not able to browse the internet. I called my internet provider, and they were not able to help me.
Any suggestions?

Perhaps I should provide a little bit more background. I currently have 2 computers, the first one Dell desktop (has XP) and the second one, brand new Gateway (has Vista Home) that I got a couple of days ago. I have just moved to a new apartment. In the previous apartment I also had a AirPort Extreme and it was working perfectly with my Dell and PowerBook G4. The interesting thing is that now that I moved and got a new provider and a new modem my Dell (which worked perfectly in my previous apartment) as well as my brand new Gateway have the same issue in terms of not being able to connect to the internet via browsers but they are able to use Skype and even use torrent clients to download torrents.
My initial hunch is that the problem lies in the TCP/IP, DHCP, settings. However, I have no idea even where to begin tweaking those settings.

Problems in connecting to Windows SBS 2003 server from OSX 10.5.x

Hi there
Out of many Macs (all 10.5.4) in our network, I have been able to authenticate others to the Active Directory and share File services of the Windows Small Business Server (SBS) 2003. But one is having problems. They have authenticated to the active directory correctly from Directory utility.
But when I try to access the SBS server, there is a message "Connecting to smb://myserver..." displayed for indefinite time. Also, I don't find the smb listed in Directory utility. Is that a problem? If so, how can it be fixed? I searched Internet but couldn't find a way to download smb client.
Please help.

It certainly works for me although I have 10.5.2. No special settings, just server address, username and password and it connects. To confirm I just tried it once more a moment ago by creating a new VPN configuration. No problems at all. Is your problem related to a single computer or is it so that now 10.5 computers can connect?

Connect from Windows Client to Oracle 10g for Windows 64-bit

Have an environment currently running Oracle 10g 32-bit on Windows 2000 Standard, and need to migrate to Oracle 10g 64-bit for Windows. Users connect to the 10g 32-bit database using the Oracle Client for Windows 10g loaded on remote PC's. If we migrate to the Oracle 10g 64-bit on Windows 2003 Server Enteprise Edition 64-bit, what type of client do I have to install on the PC's to access the Oracle 10g 64-bit database?
Any ehlp/insight will be greatly appreciated.
Eduardo in Michigan

In addition to install 32-bit Oracle client to 32-bit Windows OS, you need to know whether your application is compiled to run in 32-bit or 64-bit.
This is critical because 32-bit application can not see 64-bit Oracle ODBC and OLE DB provider.
For example, MS SQL Server 2005 uses 32-bit DTS, and SSIS, which needs 32-bit Oracle client
If you don't know, get a copy of both 32-bit and 64-bit Oracle client, and try one-by-one to know for sure. Please be aware that if regsvr32.exe in the Windows has been overwritten by older software installation, it won't register some DLL properly, and Oracle ODBC, or OLE DB won't show up as well

Problems recognizing iPhone4S through Windows 7 or iTunes

I have iTunes 11.1.4.62 running on Windows 7 Home premium. The iTunes and Windows can recognize my iPad but my iPhone 4S cannot be recognized through iTunes or Windows 7. This happened after the new iTunes upgrade.
The Apple Mobile device and the iPod services are running. I have uninstalled and installed iTunes several times and even tried the registry trick (http://support.apple.com/kb/ts3299) which some other users have used but nothing is happening. This kb article (http://support.apple.com/kb/TS1538) does not help either. The iPhone4S does not show up in device manager where as my iPad retina does.
I need to back up my iPhone to my computer.
Please help.
PS: I also keep getting notifications to update iTunes to the same version that I have. The installer installs iTunes and checks for new updates and lists the same update and prompts for updating iTunes. This has never happened before. The prompt contains the following notification:
This version of iTunes improves accessibility, including better support for closed captions and subtitles. This update also adds the ability to see your Wish List while viewing your iTunes library, improves support for Arabic and Hebrew, and includes additional stability improvements.
For information on the security content of this update, please visit: https://support.apple.com/kb/HT1222.

Never mind -- I found the solution to the problem.
The usb wire is dead. I always use a dock to charge my iPhone and thus never suspected that a rarely used power cable can go bad. But when I plugged in the power cord to the adapter, the problem solved itself! As Sherlock Holmes would say, "when you have eliminated the impossible, whatever remains, however improbable, must be the truth"

Problems in connecting to windows domain from a L3 switch

Hello,
I have a Cisco L3 switch with two subnets on that switch. I dont have vlan for each subnet, all i did is confiugred two IP's for the single vlan, meaning the switch will have a IP in the server subnet and a secondary IP in the client subnet range. For the client subnet, the secondary IP will be the gateway and for the servers, the primary ip will be the gateway.
The issue is the Domain controller is in one subnet and the clients are in another subnet.
Because of this they are not able to see each other and the clients cant join the domain. Also the DHCP is not working,meaning clients are not getting an IP from the DHCP server. The scope is set to the range of Client IP range.
The only way to fix this, i have given dual IP's to this DC and then the systems clients started joing the domain.
I dont want to have the server with dual IP's.
What is the best way i can ensure that my Domain is in the server subnet and the clients who are in client subnet can join them over the Cisco L3 switch as both the server subnet switch and the client switch connected to the L3 which acts as the core switch at the site.

hello,
Thanks for your reply.
Sorry that i didnt tell earlier that every thing works fine except the DHCP/Domain issue. This shows routing is ok.
Also i have complaints saying that when i have a user setup with a client ip, the performance is very slow, the moment i change that to a server IP range, the performance is very good.
The pity here is both for the client ip range and the Server IP range, the gateway is the L3 as i have configured dual IP's for that vlan in the L3, one for the Client IP range and the other for the server IP range.
The DHCP server will start issuing IP's to the client when the moment i change the IP of the DHCP server to the same range as that of the scope, i mean when i assign an IP to the DHCP server in the client IP range.
Both the DHCP and domain are the same machine and hence i have both problems ie DHCP not working and clients not able to join the domain.
think it should be some kind of broadcast issue here since both the DHCP and the Domain uses broadcasts.
I have tried using ip-helper address as well and still no luck :(

Unable to connect through windows live messenger o...

When i try to sign in to Windows Live Messenger, I get the meesage "cannot sign you in to messenger. This maybe because your phone is in flight mode or you do not have a data connection. Please check your access point and network settings and try again"
how can i successfully run messenger.

Following are the versions:-
Oracle:-
*10g Release 2 (10.2) for Microsoft Windows (32-Bit)*
Windows:-
Windows Vista Home Premium version 6(Build 6002: Service Pack 2)
But may i know, is Windows Home edition is a real issue ? If yes, then how am i able to connect with SQL*Plus and not with iSQL*Plus ?

SYSTEM 9.2 PLANNING ERROR when trying to connect through web client

Hi , I have created a Planning application on system 9.2version. Whwn i try to access it it gives an error and comesout.However i am able to log into application and refresh databaseusing planning desktop. I do not want to use externalauthentication. So i have bot given CSS url path in Planning CSSpath. When i give the defaul URL path Like Http:// HSS Server:58080/interop/framework/getCSSConfigfile it gives an error that user does not exist and comes out.After that i created user in HSS . But then the error came thatit's " failed to sync provisioning". I am not sure if we could add planning application into HSSwithout logging into planning web client?? Is ther any way we canadd planning application into HSS without logging into planning webclinet? Any help on this would be of great help as i have wasted 2 dayson this. 

Hey azmat thnx for replying but this is not the issue. I hadgenerated properties file (HSP,ESSBASE,HBR)..Infact the applicationname is coming ths drop down list of application on log on webpage... I guess there is some bug with 9.2.0.1 release ..it'sgiving an error in even viewer that could not retrieve version ofhyperion planning ....Anyway i have reverted back to planning 4.0.5release ..i guess i would try to upgrade when system 9.3 releasewould be available...

Problem connecting only iFolder client

Hi everyone,
I begn with iFolder 3.8 and I've a problem with connecting the client.
For information, I've 3 separate iFolder servers, two of them work perfectly !
So, on one, I can't connect the Windows Client, I've an error "iFolder can't connect, please check the informations" (translation from french).
If I try to connect on the web access, it's OK, no problem with that.
The Simias.log file says that the connexion is successful with the client but it's not...
I try to reinstall the server several times with simias-server-setup, ifolder-admin-setup and ifolder-web-setup but no effects.
If someone as already experienced this and solved this problem, thank you for your help.

OK, so I've solved my problem after hours.
I tried to reinstall completly the server and then, it works !
To conclude, if your iFolder server doesn't work at the first time, don't try to debug, format and reinstall.

Printing from MacBook to a printer shared through Windows Vista

Hi Everybody,
I'm unable to print anything from my Mac laptops to my HP printer which is shared via a Windows Vista PC.
I have a wireless home network with a PC, a latest model Powerbook G4 15"/1.67 and a MacBook Core2Duo. The PC is connected to an HP PSC 2355 All-In-One printer.
When I had Windows XP SP2 installed on my main PC, I was able to print from my Mac laptops through Samba (Advanced printer, smb://guest@myIPaddress/printersharename) without any problems.
I recently upgraded my PC to Vista Ultimate (RTM Technet full version). Now, I can no longer print via my Mac laptops, since supposedly, Vista's implementation of Samba has changed. I can, however, print from my MacBook when it's running Windows XP SP2 without any problems. This leads me to believe that the sharing-side on the Vista PC is set up correctly. The XP to Vista over wireless printing obviously doesn't use Samba. The Vista share does not have a password on it.
I've installed the Foomatic/HPIJS drivers on both my MacBook and the Powerbook. These are the errors:
Powerbook: "Unable to connect to SAMBA host"
MacBook: "The process "foomatic-rip" stopped unexpectedly with status 1"
I've tried all kinds of combinations for Samba, and also via the option "Windows Printing". My PC is in the same network Workgroup as the Macs, and they can see my Vista PC fine. I can also connect and share files with my Vista PC without any problems and connect through Samba using Finder (for file sharing). I cannot, however, see my shared printer through the Windows Printing dialog.
Can anybody help me out?
Izzer
MacBook C2D / Powerbook G4-1.67 Mac OS X (10.4.8)

Have a look at this discussion:
http://discussions.apple.com/thread.jspa?messageID=3640079&#3640079
Hope it helps.
PowerBook G4 1.5GHz, 2GB Mac OS X (10.4.6)

ORA-06413 Error when trying to connect through Win ME.

When I am trying to connect to Oracle 8.0.4 database on SCO
Unixware 7.1.0 though SQL*Plus on Windows ME. It gives error ORA-
06413: Connection not open. But it allows to connect through
Windows 95/98/NT. What may be the reason?

yes it does list wham3.....here's the output of lsnrctl services wham3
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 21-SEP-2005 15:53
:34
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=juipinj.corp.whamtech.co
m)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=wham3)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service " wham3.corp.whamtech.com" has 1 instance(s).
Instance "wham3", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:46 refused:0 state:ready
LOCAL SERVER
Service "wham3XDB.corp.whamtech.com" has 1 instance(s).
Instance "wham3", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1002 state:ready
DISPATCHER <machine: JUIPINJ, pid: 2024>
(ADDRESS=(PROTOCOL=tcp)(HOST= JUIPINJ.corp.whamtech.com)(PORT=1073))
Service "wham3_XPT.corp.whamtech.com" has 1 instance(s).
Instance "wham3", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:46 refused:0 state:ready
LOCAL SERVER
The command completed successfully

Control key not working on MB Pro while connected to windows 2008 server through 2x client. Any ideas? Works on windows through parallels.

Control key not working on MB Pro while connected to windows 2008 server through 2x client. Any ideas? Works on windows XP through parallels desktop.

Hello...
It seems I got it fixed!! I had been trying the Fixit tool from
http://support.microsoft.com/kb/306759 while typing up there :))))
This tool is for changing RDP port but running it fixed my problem (I kept the port 3389 intact)!!
Hope it helps someone.

BO - Problem to connect through windows client

Similar Messages

Maybe you are looking for