BO Universe on BI Query View

Hey experts,
Is it possible to make an universe on a view of a BI query?
Thanks,
Steven

Hi Steven,
not at this point of time. You can use BI queries and InfoProvider
Ingo

Similar Messages

BO Universe on BeX Query in Lumira

Hi All,
I have a requirement of accessing a BeX query in Lumira and do visualizations on it. As Lumira is not capable of accessing BeX query directly, I think, I would need to create a universe on InfoCube, for that BeX query, and then consume that universe in Lumira. Thereafter, I would need to create different datasets for different queries.
Now, I have two questions:
1. Is this approach correct? Is there any other more efficient methos than this?
2. Can I create a universe on BeX query directly? Is it possible?
When I'm following first approach (universe on InfoCube using IDT) and trying to consume that universe in Lumira, I am getting below error:
And when I'm following 2nd approach (universe on BeX query using UDT), I am not able to view that .unv in List of Available universes in Lumira.
Please help.
Thanks Much,
Purnima

Explanation on the error you faced:
The data acquisition of medium-large, large, and very large datasets from UNV or UNX universes is not supported on default installations of both SAP BusinessObjects Business Intelligence platforms 4.0 and 4.1.
It is recommended for customers that want to acquire such datasets to install a SAP BusinessObjects Business Intelligence platform (SAP BIP) server dedicated to SAP Lumira and significantly increase the value of the Maximum Character Stream Size of the Web Intelligence Processing Server on that particular server. Note that increasing this value on a running SAP BIP server can impact the memory consumption and performance of any BI clients tool running on that installation, particularly Web Intelligence. While this practice is not formally discouraged, we advise customers implementing this solution that they might face memory consumption increases and longer document data refreshes so they will need to monitor the SAP BIP server's behavior adequately to control the impacts.
Can you try to place some filters to limit the data volume retrieved?
Best regards
Antoine

Regarding WEBI Query view

Hi All,
I am new to this BO, I was reffering some documnets in which they have mentioned regarding the SQL query view,i.e, every query will be converted to its equivalent sql query, but this option is disabled(not active) when I am working.
Does any of you come accross this situation?.If u have any idea,please let me know.
Thanks,
Vinay.

Hi,
I didnt get you .Are you creating universe based on query right .Then once you create universe(based on query) and export .This query will be present in rich client.get back incase any issues.
Regards,
JiyyanA.

How to create a query view in sap bw?

can any one please tell me how to create a query view in sap bw 3.5?

Hi,
you can do this by using Bex analyzer and WAD ..
gop through this link ..
http://help.sap.com/saphelp_nw70/helpdata/en/0e/1339427f82b26be10000000a155106/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/0d/af12403dbedd5fe10000000a155106/frameset.htm
hope this helps you ..
Reagrds,
shikha

Error while saving a query view

Hi All,
I am trying to save a query view in my favourites and it is failing with below message:
Namespace '/BIC/' must be set to 'changeable' (transaction SE06)
I have created many query view so far, this issue has just started. Could you please help us with this, as it is very urgent.
Thanks and regards,
Shashidhar.

Hi,
Please set the setting as described in note 337950, it will help to fix the issue.
solution:
Releasing the object changeability
This setting is only intended for production or test systems that are
set to not changeable. It is not suitable for development systems. For
this reason, this setting is only effective if at least one of the
conditions specified under 'Cause and prerequisites' is met.
Go to the Administrator Workbench (Data Warehousing Workbench,
transaction RSA1) -> 'Goto' -> 'Transport Connection' and choose 'Object
Changeability'. To display the function, you may have to enlarge the
window or press the arrow keys nearby.
In the following dialog box you can select the object types that you
want to be changeable, even though the system is set to not changeable.
These objects are not connected to the transport system; this means that
no transport dialog boxes are displayed. This only applies, however, if
the preconditions mentioned under 'Cause and prerequisites' are met.
First, after releasing an object type, only objects that are original,
that is, those that were created in this system can be changed. This
prevents changes to objects that were imported into the system. However,
changes to these objects may be overwritten again during a new
transport.
You can set all objects to changeable (even the ones imported into the
system) using the context menu (right mouse button), although this
setting is not recommended for the reasons mentioned above.
Thanks,
Venkat

Error creating Universe from BW query

Hi
Creating the Universe connected to BW query (BI 7).
Connection is proper and universe designer is connected to BW system without any problem. I have already used many queries to connect to universe and webi documents has been developed.
The only difference in this BW query is, it is using hierarchy with 'derivation type' in 'select hierarchy date'.
BW query is working as expected in BEx designer.
This is the error message when trying to create the universe from BW query -
Error getting dimensions for cube <infoprovider name>/<query name>(catalog <infoprovider name>): Unknown error when executing MDX
Product name : SAP BusinessObjects Enterprise XI 3.1 Client Tools SP3
Please respond how this can be resolved.
Thanks
Sreedh

Sreedh,
I was wondering whether you could resolve this error?
Would appreciate if you can convey the resolution.
I am getting the same error - ( BOE XI 3.1 ).
Thank you,
PK

Query View name not saved in "Analysis Grid Properties" under Data Provider

Hi BW World;)
We are on BI 7.0
I have created a BI workbook which contains a query view.
However when we go into design mode and then "analysis grid properties" for this query view then "change data provider" it does not show the query view name but the query name. (we have saved the workbook)
Is this the normal scenario?
Surely should show the "query view name " and not the "query name" as confuses what data provider is being used?
Is this a bug?
Best
Stevo.... Points of course... Thanks in advance.;)
Edited by: bw4eva999 on Sep 10, 2009 4:40 PM spelling

Hi,
You have created a workbook on top of a Query View which is again depends on a Query.Now the base for Query View is a Query.So the underlying Data Provider for a workbook is a Query.
Hence when you go to Properties of grid->Change Data Provider,it shows the Query and the InfoCube,but not the Query View.
So this is not a bug and this how its been designed.
If you click for the Information of that workbook,it will show the Query and Info Provider,but not the query View.
Though it looks like wierd,it is not a bug.
Rgds,
Murali

BEX Query Views - Reqd in PRD but need to create in Dev - Data Issues

Hello Bw Gurus
BI 7.0 ECC 4.7
We have a BEx Query in BI production which uses a work centre hierarchy. The user wants to create query views on this query to use in BI production.
Our normal transport procedure of a new development object would be BI DEV - QA - PRD
However the DEV environment does not have all the work centres and the data of PRD. So if the query view needs to be created in DEV then we could not set up the view correctly as there is not the workcenters or the data in DEV.
Hopefully that makes sense?
Apart from allowing Query Views to be created in BI PRD directly is there any solution?
Best,
Steve Jones

If you need exact char values for workcenter to create your views you can quickly create the master data (just the values you want) in Dev and use them to create the views...

Unable to open a query view in web analyzer

Hi All
In web analyzer i have saved a Query view, Using save as tab.
when i tried to open that Query view through open tab in web analyzer it is throughing some exceptional error.
Is this the right way to access the saved query view, can anyone help me with your suggestion?
Thanks
Sushma

Hi,
Check this
[http://help.sap.com/saphelp_nw70/helpdata/EN/43/bc5c78da1e1bbce10000000a1553f7/frameset.htm]

What is the difference between query & query view in BI 7.0 ?

Hi Experts,
What is the difference between query & query view in BI 7.0 ?
Can anyone suggest me on this.
Thanks & Regards
Sameer Khan

Hi Sameer,
Pls find the below URL for Query&Query View
http://help.sap.com/saphelp_nw04/helpdata/EN/26/6de53cce129749893b008c627ede07/content.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/36/18788b6bca5d02e10000009b38f983/content.htm
Thanks,
John

Display Multiple reports in a single query view

Hi Team,
I have 3 similar reports for MTD, QTD & YTD.
While displaying the report in the portal.. I want to display the reports in a single view wherein the MTD report will be a default report for the input selections. whereas the QTD & YTD will be available as dropdown options in the same query view and the wll be executed for the same input selections.
Please advice how to design the view.
Regards
Sneha

Hi All,
I have created a Web Template for my requirement.
Now while adding the template to my Transport request, I am getting the following error message:
Object 'BTMP::0ANALYSIS_PATTERN_EXPORT' refers to the invalid object 'QU::'
Object 'BTMP::0ANALYSIS_PATTERN_INFO' refers to the invalid object 'QU::'
PLEASE ADVICE...
Regards
Sneha
Edited by: Sneha Santhanakrishnan on Aug 8, 2011 12:18 PM

Create A Query View!

Hi ALL
how to create a Query View for TeMplates?????
Thanks
BI Learner

hello,
Query views are saved version of query output with particulr navigational state
The advantages of query views are:
Query views can be used as the data providers when you are creating web templates.
They are also used as jump targets. They are created after you execute the query, from the Save button, you can Save View global, or save as jump target.
They can also be used to format the query e.g hide some characterictic, display/hide result rows, sorting keyfigures etc.
Reg migration:
All existing SAP BW 3.x queries can be edited with the SAP NetWeaver 2004s BEx Query Designer without further manual adaptation.
After editing with the SAP NetWeaver 2004s Query Designer, queries cannot be edited with the SAP BW 3.x BEx Query Designer anymore.
Queries created or adapted with the SAP NetWeaver 2004s BEx Query Designer will still appear in the Open Dialog of the SAP BW 3.x Query Designer, but they cannot be opened anymore
Views:
Query Views that were created before upgrade/migration will still run after a query has been changed with the SAP NetWeaver 2004s BEx Query Designer
In general query views do not need to be migrated
Regards,
Dhanya

How to Create/Modify/Delete a query view from the web template in BI 7.0

All:
In BW 3.5, the Query Selection View web item was introduced for users to create a query view to save the navigational state of a query. This web item was also available to modify and delete an existing query view.
The Query Selection View web item does not exist in BI 7.0. I see the drop down web item can be used to display the query views associated to a query.
Can anyone share how to create,modify,save or delete a query view on the web in BI 7.0
Thanks,
Kumar

Sanjay, we experienced the same issue. Below are a few pieces of information that may be of help: 1-The Save As button on the 0ANALYZER template saves the query to the portal. From Bex Web or Bex Analyzer, you have no access to these saved views. We created a ZANALYZER copy of the 0ANALYZER template and removed the Save As button. 2- If you right mouse click on any item in the query results grid of Bex Web, you get a small menu. Clicking on the menu item Save View will save the view to BI. You do not have the ability to delete the saved views from Bex Web. However, you can delete them from Bex Analyzer. This was not an option for us since most of our users are using Bex Web. 3- On the same menu, clicking on Bookmark, saves the navigation and also opens the Internet Explorer Favorites maintence window. The navigation is saved as an entry into the users Internet Explorer favorites where they can organize and delete their entries. However, deleting the favorite does not delete the entry for the bookmark in BI. The bookmarks are stored in table RSWR_DATA. Program RSWR_BOOKMARK_REORG can be used to manage the saved bookmarks. We are loading RSWR_DATA into a chracteristic so that we can query the information in order to help us manage it. I hope this helps you and others that appear to be struggling with the issue of saved views in Bex Web.

Query View missing in the BI Content

Hi
I want to install a 3.x Web Template which is using a Query View as the dataprovider, but the Query View is not available as D-version and hence the Web Template throws an error that the query view is missing and hence cannot execute the web Template.
I have checked in the tables : RSZWVIEW and there is an entry but there is not object in RSORBCT to install.
SAP BI_CONT version 704 level : 003
When i try to activate the D-version of the query view the it gives the following message:
*Object 0CSAL_C07_Q0101_V01 (Query View) could not be collected for object ()
Message no. RSO296
Diagnosis
You have collected objects in the BI Metadata Repository. Associated objects for object of type have also been collected. Object 0CSAL_C07_Q0101_V01 of type Query View was among these objects.
However, this object 0CSAL_C07_Q0101_V01 of type Query View is not available in the metadata repository.
System Response
Object 0CSAL_C07_Q0101_V01 of type Query View is ignored in further collections. The links for object of type are incomplete. This may result in you not being able to activate this object.
Procedure
If this error occurs while you are installing BI Content, an error may have occurred during the delivery. Inform SAP. In all other cases, check that the object has not been deleted by another user during collection, for example.*
Please let me know incase of any other info required.Thanks!

Hi Kumar....
Go to Datasource Repository(RSA2)................give the datasorce name and click on display.......from there u will get the extract structure name......copy it ...........go to SE11.............In the table field give the Extract structure name.............and click on the Where used list in the top.................from there u will get all the program name/Function module............where this extract structure is used...........copy that name and open it through SE37................
Hope this helps..........
Regards,
Debjani........

Variable with proposed value in BEX Query View

Dear SAP-Gurus,
I have a Web Application with some views on one query. In the inital screen i show the popup for entering the global variable values. Now my question; is it possible to give a global variable used filled by exit and used in these queries a proposed value, receeived by user exit?
With normal query this works, but not with a query view.
any suggestions?
kind regards.
Jürgen

Hi,
if anyone has the same problem - you just have to set the parameter variables_clear=x in webtemplate.
same applies to bookmarks, if you want the variables to be filled by your exit.
regards
Jürgen

BO Universe on BI Query View

Similar Messages

Maybe you are looking for