BO WebI Report Issue

Hi ,
We are using Greenplum + BO , We can able to connect the BO with greenplum in Universe.
While we connect to the Webi we are getting the below attached issue , Please help us to resolve.

Hi,
Please post this question in SAP Webi Intelligence space for quick response.
Here is the link....>SAP BusinessObjects Web Intelligence

Similar Messages

Webi report: Issue Cannot retrieve dimensions from Cube

Hello Experts, We're facing an issue with a partical set of Webi reports in Quality environment. The reports are BW reports based on OLAP BICS connectivity on top of Bex queries.y Below is the scenario and the issue: 1. The backed Bex queries have been trasported to Quality BW system and they're running fine when run from RSRT or Bex analyzer. 2.The Webi reports along with the BICS connections have been migrated to the Quality box and the BICS connections have been editied so that they point to the Quality BOX bex queries and they're testing and responding to the connection successfully. 3. The Webi reports pointed to the Dev Box in the Dev BOBJ system are working fine, but when the same reports for which the connections were repointed in Quality as above, are giving the error "Cannot Retrieve Dimensions from Cube". Steps taken: a. Deleted the reports and the BICS connection from Quality environment and remigrated the reports,connecitons and changed the connecitons but still the issue persists. b.Tried finding the root cause and got the following issue in the Bex query in Quality: There are filters put in the Bex query . All other filters are working fine except 0CALMONTH. We tried putting all sorts of variables on 0CALMONTH, but the moment a variable is put on 0CALMONTH, this issue occurs. But when we tried removing the variable from 0CALMONTH in filters and restricted it to a single value, the Report works fine. However the same is not an issue in the Dev Box and all queries with similar variables are working fine. So we're thinking this might be an issue on the BW backend and the cube might have to be transported again to the Quality Box. ANy quick suggestions or inputs on this would be greatly appreciated. Thanks and regards, Abhishek

Hi Abhishek,
I am facing same issue.Have you resolve this issue?
Regards,
Rajesh

Webi report issue(BO Infoview)

Hi Gurus,
I created a webi report in BO infoview using an universe. But when I run the report it does not display any data , it shows only blue and yellow color table in the report display panel. Any help I would appreciate it.
Thanks
Liza

It appears to be a java version issue:
The specified item was not found.

SAP BI Mobile Publishing Webi report issue

Hi All,
We want to use the BI Mobile App on IPad for Webi reports. The app is successfully implemented on the IPad, connection to BO server is done, categories are visible. But no report.
In Webi I tried to publish my report to the respective 'mobile' category, but the the 'Publish to' is missing in the menu.
Save as is possible, but it has no effect.
I checked the CMC and I have full authorisation for publishing (and anything else).
What could be the reason that the 'Publish to' menu is not visible? Is this the reason why I do not see my Webi report in the Bi Mobile app?
I would appreciate any kind of help.
Danya

HI Danya,
You have already done the configuration it seems.
Mobile Category has been created.
Can you go to your report, right click, categories
add it to Mobile categories
check on your ipad
Also, which version of BI and SAP BI app for mobile are you using?
Cn you elaborate on the publish to menu, with a screenshot may be
Regards,
Atul B

Sap Query Web Reporting - Issues with accents

Hi,
We was using Web Reporting for Sap Querys, throw this tool we can generate automatically web reports.
When we go to generated web report, selection screen show us character &#56292; instead accent letters.
In addition to this, generated web report shows two buttons with german text: "report ausf?" and "Werte zur?zen".
Guaranteed Rewards points.

Hi Peluka,
are these web report generate by SAp Query ITS based. If yes this is the right forum to ask, if no I would sugest to ask in the BI forum.
Best regards,
Klaus

BW Web Report Issue - Result set too large

Hi,
When I execute a BEx Query on Web I am getting “Result set too large ; data retrieval restricted by configuration (maximum = 500000 cells)”.
Following to my search in SDN I understood we can remove this restriction either across the BW system globally or for a specific query at WAD template.
In my 7x Web template I am trying to increase default max no of rows parameters, As per the below inputs from SAP Note: 1127156.
But I can’t find parameter “Size Restriction for Result Sets” for any of the web items (Analysis/Web Template properties/Data Provider properties)….in the WAD Web template
Please advise where/how can I locate the properites
Instructions provided in SAP Note…
The following steps describe how to change the "safety belt" for Query Views:
1. Use the context menu Properties / Data Provider in a BEx Web Application to maintain the "safety belt" for a Query View.
2. Choose the register "Size Restriction for Result Sets".
3. Choose an entry from the dropdown box to specify the maximum number of cells for the result set.
The following values are available:
o Maximum Number
o Default Number
o Custom-Defined Number
Behind "Maximum Number" and "Default Number" you can find the current numbers defined in the customizing table RSADMIN (see below).
4. Save the Query View and use it in another Web Template.
Thanks in advance

Hi Yasemin,
Thanks for all help...i was off couple of days.
To activate it I can suggest to create a dummy template, add your query in it, add a menu bar component add an action to save the query view. Then you run the template and change the size restriction for result set then you can save it by the menu.
Can you please elaborate on the solution provided,I created dummy template with analysis and Menu bar item...i couldn't able to configure menu bar item...
Thanks in advance

Bex Hierarchy issue on Webi report

Hello Experts,
We are facing issues on use of Bex hierarchy in webi report,
Issue statement: We have webi report on bex query which have table and chart with input control on year and month to filter the report, table and chart uses hierarchy object to disply data. When we refresh report table and chart shows data with hierarchy on first level but once we check or uncheck any value from input control hierarchy in table and chart gets expanded and shows as flat structure. to get correct behaviour we have to collaps hierarchy.
Above behaviour happens for all report level filter like, block filter, drill filter, input control.
Please help me to know this is a bug or something wrong happened with development.
Regards,
Priyank Bhayani

Hello Everyone,
I have got SAP note which states this is expected behaviour hence closing the discussion.
1702356 - Hierarchy Nodes expanded automatically to all levels after selecting value in the input control in a webi report.
Regards,
Priyank Bhayani

SAP BusinessObject Mobile WebI Report Prompt Issue

Hi,
I have problem to view the Prompt value in Long Text for WebI report in my iPad. The SAP BusinessObject Mobile application is on version 5.1.12.
We are using BI Platform 4.1, and the WebI report is connected to Bex Query using BICS connection.
Below are the settings that I had done:
Setting of Characteristic in BW:
Setting of Characteristic – ZBPARTNER in BEx Query Designer:
Below are the report Prompt result in BI LaunchPad and BI Mobile:
Example data:
Business Partner ID 123 has description in Long Text (DO NOT USE - KOC ALLIANZ SIGORTA A.S) and Short Text (DO NOT USE - KOC).
Business Partner (on top of ZBPARTNER) in WebI is showing Long Text as expected.
For example, you can see the long text "DO NOT USE - KOC ALLIANZ SIGORTA A.S".
Business Partner (on top of ZBPARTNER) in Mobile Apps is showing Short Text:
For example, you can see the long text "DO NOT USE - KOC".
I need the Prompt value is the BusinessObject Mobile to be display with Long Text, but I cannot find any configuration to achieve this.
Is anyone encounter similar issue and can provide me some suggestion?
Thank you in advance.
Regards,
Edison Wang

Hi,
Just like to follow up whether is there anyone encounter similar issue like above which can give me some advise?
Thank you.
Regards,
Edison Wang

Webi Report Performance issue as compared with backaend SAP BW as

Hi
We are having Backend as SAP BW.
Dashboard and Webi reports are created with Backend SAP BW.
i.e thru Universe on top of Bex query and then webi report and then dashboard thru live office.
My point is that when we have created webi reprts with date range as parameter(sometimes as mandatory variable which comes as prompt in webi) or sometimes taking L 01 Calender date from Bex and creating a prompt in webi, we are facing that reports are taking lot of time to open. 5 minutes 10 minutes and sometimes 22 minutes to open.
This type of problem never ocurred when Backened was Oracle.
Also when drilling in webi report,it takes lot of time .
So can you suggest any solution?

Hi Gaurav,
We logged this issue with support already, it is acknowledged.
What happens is that whenever you use an infoobject in the condition
(so pull in the object into condition and build a condition there,
or use that object in a filter object in the universe and then use the filter)
this will result in that object being added to the result set.
Since the query will retrieve a lot of different calendar days for the period you selected,
the resultset will be VERY big and performance virtually non-existent.
The workaround we used is to use a BEX variable for all date based selections.
One optional range variable makes it possible to build various types of selections
(less (with a very early startdate), greater (with a very far in the future enddate) and between).
Because the range selection is now handled by BEX, the calendar day will not be part of the selection...
Good luck!
Marianne

Performance issue and data getting interchanged in BO Webi report + SAP BW

Hi,
We are using SAP BW queries as the source for creating some BO reports.
Environments :
SAP - SAP BI 7.1
BO - BO XI 3.1
Issues :
The reports were working fine in Dev and Q with less data. But when we point the universes to BW prod ( where we have much data), the reports are taking quite a long time to refresh and getting timed out. This query has some key figures which are having customer exits defined to show only one month data. And also BW accelerators are updated for the infocubes pertaining to this query. The BO report is giving data if we apply a filter in 'Query Panel' of Webi to show only current month dates. But then the issue is the values are getting interchanged for many objects. For ex: there are 2 objects- ABS version and Market region. The values are getting interchanged in the BO level.
Please let us know if anything needs to be done in BO or BW to fix this issue if anyone has faced the same
Also Please let us know if customer exits and accelerators works fine with BO
Thanks
Sivakami

Hi,
Thanks Roberto. We'll check the notes
@Ingo,
We are able to solve the performance issue by removing unused Key figures and dimensions from the query, but the column value interchange issue still persisits
The build version is - 12.3.0
Query Stripping
Where should we enable query stripping? When i went through some documentation it was written that it'll be enabled automatically from XI 3.1 Sp3. Can you please let us know if its so and what we need to do to enable it.
The coulmn interchange is happening when we use dimensions in a certain order. When product type is used along with Market region. Market region shows values of Product type also in Webi report.
Thanks & Regards,
Sivakami

Cosmetic issue in WEBI report while creating on top of BEX query

While Creating WEBI report on tob of BEX Query, it is displaying both Technical names and descriptions at webi design level.
The infoobjects we had used in BEx Query is Navigation Attributes.
In case if we are using normal Infoobjects, we can able to restrict as per my requirement like uniqe name, description or both.
In this webi report user(Power user) having flexibility to drag and drop available characteristics.
Due to this issue column heading is displaying both technical name and description. For example Customer(ZCUSTOMER)

How come , if it is display for data means it also need to be display for header (Dimension also).
you can try alternatively in webi by creating variable for that Iobj .
Refer below blog provide details:
BOBJ Tricks: Toggle the Display of Text and Key in Webi
Regards,
Seshu.P

Issue with webi report on BEx query

Hi,
I have created a universe on top of Bex query. There is no issue in creating and exporting the universe. But when I try to create a webi report out that BEx query, I am not able to see the values. Say if I have a column called "Company" I am getting the value as "All Company" and so on. What will be the issue?
But when a report is generated out of BEx analyser they are able to see the values properly.
Same user credentials are used in both the places (Importing the query into universe, Connecting to BEx Analyser) .
Thanks & Regards,
Subbu S

Hi Subbu,
the universe will generate a L00 item and a L01 item. The L00 item shows the All member of the characteristic in the case of a flat list and the Top level nodes from a hierarchy. the L01 item should give you what you looking for.
Ingo

Cells merge issue when extracting webi report in excel format

Hi Experts,
We have some WEBI reports in BO XI 3.1.
The reports have header where we are showing report name and some values which user selects in prompt.
Now the issue is that when we save our webi report in excel format, many cells get merge.
I have read many post on scn which suggest some solutions like changing the autofit width option to no and aligning the header width with colums.
Tried both the option but no success.
Is there any other way to achieve this.
Thanks in advance,
Regards,
Rishabh

Hi,
We managed to find the workaround for this merge cell issue.
Sharing it might be helpful for someone.
- Align the report name and other block in report in such a way that the ends are in line with the end point of any column. The only limitation is that when applying pivot to the excel output we neet to click on any of the ccolumn so that excel identify the data set.
- Second workaround is to break the webi document in two parts report1 will contain the report name and the block to show the prompt values selected by the user where as report2 will contain the table withactual data. The only limitation with this workaround is that when exporting the repot output to excel we will get two tabs in the excel sheet one containing the prompt values and secont tab containing the actual data.
Regards,
RS

Webi Report scheduling issue

Dear Experts,
I have webi reports which are running fine when i refresh the query from query panel. When i am scheduling the report it is failing.
My webi reports are connected to the Bex Queries using OLAP Connections which is working fine for other reports.
I am getting the following error message
"Can not connect to the source olap com.sap.conn.jco.JCoException: (103) JCO_ERROR_LOGON_FAILURE: Access key access is no longer possible"
Because of this BW Credentials are getting locked and user cannot able to access the BW System.
Kindly help us getting this issue solved.
Thanks in advance.
THanks & Regards,
Archit Sarwal

Hi Archit,
Try this...
Logon to Central Management Console (CMC) with an Administrator user.
Click on OLAP Connections.
Right click on the connection and click User Security.
Assign Full Control to the User on the connection.

Issue while opening BI4 webi report instance using CMC on IE8 browser

Hi,
Having issue while opening BI4 webi report instance using CMC on IE8 browser.
Steps to reproduce the error:
1. Login to CMC
2. View Webi History.
3. Open successful instance (For the 1st or 2nd time reports are opening up, from the 3rd time it just freeze the session)
4. After it get freeze we need to close the IE using Task Manager.
Can any one please suggest a resolution for this issue.
Thanks,
Ganesh.M

Hello Gokul,
first thing is to check is if your chrome version is supported by your current BO version as specified in the PAM (is it?). If the chrome version is supported, and you still have an issue, then you can check with a sap support engineer.
best regards,
Victor

BO WebI Report Issue

Similar Messages

Maybe you are looking for