BO XI 3.0 scheduling analytics fails

Hi All,
When trying to run an analytic with the scheduler in the Dashboard and Analytics application it gives an error:
Running programs of this type has been disabled by the administrator.
However, cannot find anything in CMC that would cause this ?
Everything is done with administrator user and AFScheduleProgram should have all the rights.
Thanks for any hints, Timo

Hi,
I also have an issue with the REXEC server when scheduling a metric or analytic.  The error are as follows: 
Authentication failed because we can not connect to the REXEC server. Confirm that the REXEC server is available on the specified system and that your user credentials are correct.
The REXEC serever is running and the scheduling for our XI R2 version is working fine.  The only difference I can see is that when I insert the OS username and password for the Object Rights, it deletes the password when I save the changes.  Could this be a bug?
Edited by: Anna-Marie du Preez on Sep 22, 2008 10:21 AM

Similar Messages

  • GPP Scheduled Task Fails in Group Policy Modeling depending on DC

    We have multiple domain controllers running at a 2003 functional level.
    We have 1 DC running Server 2003 x86 SP2 and the rest run Server 2008 (maybe R2)
    I created a GPO that includes a Scheduled Task Group Policy Preference under Computer Configuration.
    In order to test this I used Group Policy Modeling in the GPMC on a 2008 R2 Machine where I am editing Group Policy.
    If I run the modeling (perform the simulation on the 2003 DC it fails. (Note I am modeling the GPO for a different computer, not the 2003 SP2 DC, I am running the modeling for a Workstation)
    Information from the Component Status on the Summary Tab of the Modeling Report
    Component Name Status 
    Group Policy Infrastructure Success 
    EFS recovery Success (no data) 
    Group Policy Scheduled Tasks Failed 
    Group Policy Scheduled Tasks failed due to the error listed below and failed to log resultant set of policy information.
    Additional information may have been logged. Review the application event log on the domain controller on which the simulation was run for events between 2/28/2014 10:07:36 AM and 2/28/2014 10:07:36 AM. 
    Registry Success 
    Security Success 
    Info on the Settings Tab of the Modeling Report below.
    An error has occurred while collecting data for Scheduled Tasks.
    The following errors were encountered: 
    An unknown error occurred while data was gathered for this extension. Details: Invalid class  
    If I run the modeling using a 2008 DC to perform the simulation it works fine.
    Per the instructions on the Summary Tab regarding the scheduled task failure I look at the event log on the 2003 domain controller and this is what i find.
    The event I get on the 2003 DC is 8196 and I will place the details below.
    Event Type:   Error
    Event Source:           Group Policy Scheduled Tasks
    Event Category:        Disk
    Event ID:       8196
    Date:              2/27/2014
    Time:             4:48:47 PM
    User:              NT AUTHORITY\SYSTEM
    Computer:     <computername>
    Description:
    The client-side extension caught the unhandled exception '0xC0000005' inside: 'threadEntry : client main' See trace file for more details. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    So, should I be concerned that this is failing on the 2003 DC, does this mean that if my workstations authenticate to my 2003 DC that the preference will not process?
    I was reading that in 2003 client side extensions were not there and can be installed, would this make the modeling succeed?
    How do I get verified, I tried to post screenshots, but I could not. :(

    Hi Jonathan,
    As you have found the reason, I want to confirm whether the issue has been fixed.
    In fact, for Windows Server 2003 to apply or process Group Policy Preferences settings, we must install client-side extensions of GPP for Windows Server 2003.
    Although this is not related to this case, for your information, if our clients are Windows XP or Windows Vista, to use GPP, we must install client-side extensions for these
    workstations respectively.
    Regarding GPP, the following article can be referred to for more information.
    Group Policy Preferences Getting Started Guide
    http://technet.microsoft.com/en-us/library/cc731892(v=WS.10).aspx
    Best regards,
    Frank Shen

  • Help !!!  Re: Fianacial Analytics failed with Error Code = 36331

    I am getting an error exactly reported under another Post 'Re: Fianacial Analytics failed with Error Code = 36331'
    workflow log shows DB error to OLTP database..
    ERROR : LM_36488 [Wed Aug 19 15:05:52 2009] : (5928|2384) Session task instance [SDE_ORA_GLJournals_Full] : [TM_6193 An error occurred while expanding the connection parameter [Database connection name ORA_R12 for database connection variable $DBConnection_OLTP is not well defined.
    Can someone point to where the probem is
    I have Physical datasource definition of OLTP Warehouse -> Test Connection works fine -->

    I am unit Testing the activity SDE_ORA_GLJournals under Execution Plan, i can see an error.
    ANOMALY INFO::: Error while executing : INFORMATICA TASK:SDE_ORAR12_Adaptor:SDE_ORA_GLJournals_Full:(Source : FULL Target : FULL)
              MESSAGE:::
              Irrecoverable Error
              Error while contacting Informatica server for getting workflow status for SDE_ORA_GLJournals_Full
              Error Code = 36331:Unknown reason for error code 36331
              Pmcmd output :
    any ideas
    girish

  • How to make scheduled jobs Fail if the return partial results?

    How to make scheduled jobs Fail if the return partial results?
    Does anyone know if there is a way to do this?
    We have a number of reports that we schedule to various locations in Excel and PDF. We are frequently getting problems which are manifesting themselves as empty data providers and if we run them as Web Intelligence reports it says Partial Results. Re running the reports normally fixes the problem and returns the data correctly but the problem is that the scheduler reports them as successful and the emails or files get distributed (causing our customers to complain!!!).
    Currently using XIr2 +SAP integration Kit migrating to XI 3.1 in July 2009
    Any ideas/suggestion would be appreciated...
    I did find reference to the adapt case ADAPT01122128 which may help but when and if are unkowns so not much help.
    Ta
    Nick

    This may be helpful to some people:
    http://blogs.sun.com/milan/entry/using_web_service_to_send

  • The last scheduled refresh failed. Click for details

    Hi,
    I have Discoverer scheduled results published in Portal via portlet.
    The scheduled job is set to run everyday in Discoverer.
    In Portal while publishing the results I set it up to refresh every day.
    Though the discoverer scheduled job runs without any error I see in Portal the portlet is not refreshed.
    It gives error "The last scheduled refresh failed. Click for details".
    The details shows something like this
    An error occurred while getting requested worksheet. BIB-10306 Object with name SWB:_LIBRARYEXECDIV_FORMAT/148142/1 could not be found.
    or like
    WWC-50003 - Object not found.
    Cause:
    The specified path to the given object does not exist.
    Action:
    Check that the path is valid. Path names are case-sensitive.
    Can anyone help me with this
    Thanks
    Jay

    Hi.
    I don't know any real solutiion, but why don't you try to delete that potrlet and create a new one.
    It's a simple and fast way and it will usually help in simmilar situations. Only if the new portlet also fails, it's a time for deeper investigation...
    Jakub

  • DeskI schedule often  fail Cannot find the 'Universe' universe. (DA0011)

    Hello,
    I have a user with 25 reoccurring daily schedules.  Out of these one or two will fail daily with the error "Cannot fine the 'Universe Name' universe. (DA0011).  It is not always the same reoccurring schedule that fails.  It fails on any of our four DeskI nodes, and the times it fails are not consistent.
    It is only happening for instances against one universe.  When I setup a schedule for myself with the same parameters, it completes successfully.
    Business Objects Enterprise XI 3.1 SP3 FP5
    AIX 5.3
    Excel format to email.
    This appears to have started happening in October, but I have not been able to find a reason why it is happening.
    Thanks!

    Ryan:
    Were you ever able to resolve this issue?  We are having the same issue where random schedules will fail with the message cannot find the 'Universe' universe. (DA0011).  We know it is not a rights issue as we 3,000 + schedules going against the universes and only a handful will fail each day with this error.
    We are on XI 3.1 SP4, it does not make a difference if the output is excel, text or PDF it happens
    Brad

  • Automatic Email When Scheduled Report Fails?

    Is there a way to configure XI to automatically send an email if a scheduled report fails to run successfully?

    This is actually configured at the report level from the CMC and not via auditing. For each report that you want notification(s)to be set for, switch to the Schedule tab --> Notification in the CMC. Enable email notifications as required. ie. "A job has failed to run. "

  • Primary Schedule & Email Schedule are failed

    Hi,
    My default schedules (Primary Schedule & Email Schedule) are failed.
    error:
    WKG-30724: Invalid SQL command: BEGIN CTX_DDL.SYNC_INDEX('WK$DOC_PATH_IDX'); END;
    java.sql.SQLException: ORA-20000: Oracle Text error:
    DRG-50857: oracle error in dreii0fsh
    ORA-01653: unable to extend table MYSAMPLE.DR$WK$DOC_PATH_IDX$I by 1024 in tablespace MYTBSPACE01
    Please show me how to solve this problem.
    Many thanks,
    LTH

    Hi,
    You are hitting this problem because your tablespace is not big enough.
    You can alter the table space to increase your table space.
    example:
    alter tablespace add datafile '/private/../datafile1.dbf' size 100M autoextend on next 10M maxsize 500M;
    Hope this helps!
    Cindy

  • Schedule - Analytics, Dash Board

    Hi All,
    How we schedule Analytics , Dash Boards in Infoview ?

    Hi All,
    How we schedule Analytics , Dash Boards in Infoview ?

  • SharePoint 2010 - Web Analytics - Failed Queries Report

    Hi,
    I hope someone has an answer for this.  For some time, I've had SharePoint 2010 Enterprise edition installed and configured on a 3-tier (3 app, 3 wfe, 3 sql) setup.  While the Web Analytics reports have been running since day 1, the "Failed
    Queries" report has never captured click-throughs.  This has been bugging me for a very long time... the "Failed Queries" report only ever shows either "100%" or "No results returned" in the "Percent Abandoned"
    column.
    Has anyone ever had this issue?

    I've enabled Verbose logging for Web Analytics and this is all I get (after performing a search and clicking on a result):
    11/13/2014 08:12:42.34  w3wp.exe (0x50AC)                        0x6648 Web Analytics Services       
     Logging Services               ea8x Verbose  Search Logging WS: Logging query information 
    11/13/2014 08:12:42.35  w3wp.exe (0x50AC)                        0x6648 Web Analytics Services       
     Logging Services               ea8x Verbose  Search Logging WS: Logging query information 
    11/13/2014 08:12:42.37  w3wp.exe (0x50AC)                        0x6648 Web Analytics Services       
     Logging Services               ea8x Verbose  Search Logging WS: Logging query information 
    11/13/2014 08:12:42.37  w3wp.exe (0x50AC)                        0x6648 Web Analytics Services       
     Logging Services               f7mi Verbose  Search Logging WS: Skip logging of query from invalid location 
    11/13/2014 08:12:42.38  w3wp.exe (0x50AC)                        0x6648 Web Analytics Services       
     Logging Services               ea8x Verbose  Search Logging WS: Logging query information 
    11/13/2014 08:12:42.40  w3wp.exe (0x50AC)                        0x6648 Web Analytics Services       
     Logging Services               ea8x Verbose  Search Logging WS: Logging query information 
    11/13/2014 08:12:42.40  w3wp.exe (0x50AC)                        0x6648 Web Analytics Services       
     Logging Services               f7mi Verbose  Search Logging WS: Skip logging of query from invalid location 
    11/13/2014 08:12:42.42  w3wp.exe (0x50AC)                        0x6648 Web Analytics Services       
     Logging Services               ea8x Verbose  Search Logging WS: Logging query information 
    There doesn't seem to be any errors associated with this anomaly.  All the reports and data collection processes work.  The loggers capture all of the queries and whether there were results or not.  It just doesn't capture the user's click-through.

  • Automatic scheduled jobs failed but nothing shown up in dba_jobs?

    Hi All,
    My db version is 10.2.0.4.0. In the alert log file , i could see the following messages:
    Summary of Errors (grep ORA-)
    ORA-12012: error on auto execute of job 3196
    ORA-00942: table or view does not exist
    ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2251
    ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2457
    ORA-06512: at "SYS.DBMS_IREFRESH", line 685
    ORA-06512: at "SYS.DBMS_REFRESH", line 195
    ORA-06512: at line 1
    ORA-12012: error on auto execute of job 3197
    ORA-00942: table or view does not exist
    ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2251
    ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2457
    ORA-06512: at "SYS.DBMS_IREFRESH", line 685
    ORA-06512: at "SYS.DBMS_REFRESH", line 195
    ORA-06512: at line 1
    ORA-02091: transaction rolled back
    I am trying to see why those jobs 3196,3197 are failing by querying dba_jobs;
    SQL> select * from dba_jobs where job=3196;
    no rows selected
    SQL> select * from dba_jobs where job=3197;
    no rows selected
    It should show regarding that jobs.right? Can anyone please tell me why its not showing any information about the jobs? If i am looking at the wrong place then please guide me right one.
    Thanks In Advance.

    Thanks for your replies.
    I could see the below jobs on dba_scheduler_jobs but no materialized views refresh jobs.
    SQL> select state, job_name from dba_scheduler_jobs;
    STATE JOB_NAME
    SCHEDULED AUTO_SPACE_ADVISOR_JOB
    SCHEDULED GATHER_STATS_JOB
    DISABLED FGR$AUTOPURGE_JOB
    SCHEDULED PURGE_LOG
    SCHEDULED MGMT_STATS_CONFIG_JOB
    SCHEDULED MGMT_CONFIG_JOB
    SCHEDULED RLM$SCHDNEGACTION
    SCHEDULED RLM$EVTCLEANUP

  • Scheduled Report Failing - Don't Know Why

    I'm trying to re-create a scheduled report on CMC that had gotten deleted. It ran before (sometimes multiple times...) but at least it ran. I'm duplicating all the settings for this report based on how they were before, but every time I try to get the report to run, it fails.
    I don't know enough about this to be able to embed any kind of error messages in the e-mail notifications we get. All I know is that no matter what I change/tweak/adjust, we get an email saying "This report has failed to run."
    What kinds of things should I be looking at to troubleshoot? I know the report itself is fine, as users can view it normally (as in, through other viewers). There's definitely something specific to the scheduling process that is not correct, but I don't know what to look at.
    Here is how the scheduling is currently configured:
    Schedule > Main Tab
    -Run Weekly, Tues - Sat
    -Start Date: 10/01/08, 8:30 AM (I originally set this up yesterday, so today at 8:30 should have been the first time it ran, but instead it failed)
    -End Date: 10/01/18, 12:00 AM
    -Number of retries allowed: 0
    -Retry interval in seconds: 1800
    Schedule > Notification
    -Email notification based on: a job has failed to run
    -Message: Report failed to run. Scheduled Report: %SI_NAME% - %SI_STARTTIME% What other codes can we put in this message, BTW? I've been trying to look for something to return error codes, but %SI_OUTCOME%, %SI_STATUSINFO%, and %SI_ALERT_MESSAGE% don't display anything, they just print on the email
    Schedule > Destination
    -Destination: Email (SMTP)
    -Clean up instance after scheduling is checked
    -We have "Set the values to be used at schedule time here:" populated with our list of email addresses for recipients
    -Attach object instance to email message is checked
    -Specified file name: %SI_NAME%%SI_STARTTIME%.%EXT%
    -Add extension is checked
    Schedule > Format
    -Format: Microsoft Excel (Still fails if we choose Excel Data Only or Adobe Acrobat)
    -Use options saved with report is checked (Still fails if we deselect this)
    Schedule > Schedule For
    -Schedule only for myself.
    Could really use some help here, as I don't know what in the world could be causing this to fail. Thanks in advance.

    First thing is to forget all the complex configs and just try to schedule the report to run once now, no alerts, no notifications, no nothing.
    Does that work?
    Then you can build up the schedule, to see where the problem is coming from.
    Sincerely,
    Ted Ueda

  • Scheduled report failed after 10 mins

    Hi Everyone,
    We are using Business Object XI 3.1 and Crystal Report 2008.
    We have a few reports which uses Java Beans Connectivity. They all run fine using Crystal Report 2008 Designer.
    After I publish the reports to the server and schedule it to run from InfoView, the reports fail if it runs over 10 mins and returns error ( See below). If I rerun the report and it completes within 10 mins, it will be fine.
    Error:
    Title: Test Report
    Document Type: Microsoft Excel
    Status Failed
    External Destination: None
    Owner: SLuo
    Server Used: BOETEST.CrystalReportsJobServer
    PID: 14496
    Folder Path: Reporting
    Remote Instance: No
    Creation Time: 6/27/2014 10:21 AM
    Expiry: 6/27/2024 10:21 AM
    Start Time: 6/27/2014 10:22 AM
    End Time: 6/27/2014 10:32 AM
    Printer: None
    Formats: Microsoft Excel
    Parameters: 1/6/14; 1/6/14
    Error Message: Error in File ~tmp38a08076f722e00.rpt: Failed to retrieve data from the database.
    I added -crpetrace 7 - trace to the command line params to view the details of the log, however not much luck in getting a meaningful message.
    The log from Crystal Job Server:
    2014/06/30 14:03:50.063|==| | | 3900|4308|
    |||||||||||||||procReport.dll:
    CRPE FAILED: GetLastPEErrorInfo(1) returns crpe error code [723] with
    extended error string [Failed to retrieve data from the database.
    Failed to retrieve data from the database.
    Error in File ~tmpf3c80895162f60.rpt:
    I have looked the configuration of Crystal Job Server, Reports Cache Server and Processing Server, nothing obvious that has limited the connection to 10 mins. I have extended the time in CRConfig.xml still no luck.
    There are other reports on the server using direct db connection and run fine for 2 hours+.
    Anyone has experienced this before and aware of any configuration that might cause the report to fail in 10 mins?
    Many thanks,
    Shan

    Hi Shan,
    You can refer to the following SAP KBA for the issue:
    1204347 - Error: "Failed to retrieve data from the database" when using Javabeans as a datasource
    The SAP Note is for BO XI R2; however, you can try the same resolution for BO XI 3.1.
    Hope this helps.
    Regards,
    Renu

  • DB13 Calender Scheduling backup failed

    Hi Guru's/Experts,
    Our DBAcockpit backup planning is on every Wednesday... Yesterday it was failed and the status it is showing is 'Scheduling Failed'  I tried to Re-Scheduled it is giving the message "Action Successfully Completed". When I tried to check the jobs in sm37 named DBA:BACKUP it is not present in any case neither scheduled,active,released nor cancelled.
    After running the Rescheduled i check the SM21 status in that it is giving the warning Failed to maintain status entry for job DBA:BACKUP_DEV______@131106/400
    I have checked the SAP Note 1242278 - DB6: Status 'Scheduling failed' in planning calendar   but it is not compatible with my release version i have SAP_BASIS 702 with support package SAPKB70210 (level 10)
    Can we have updated version of this note so that i can implement this on my system to resolve this issue
    If you have any further quick suggestions it will be appreciated...
    Would be looking forward for your help..
    Thanks & Regards,
    Prasad Deshpande

    Hi Deepak,
    Thanks 4 the quick reply when i am clicking on DBA Planning Calender and after selecting the job when i clicked on Action Details it is showing only this as per screen below
    Is there any further option apart from this...
    Please Excuse me for the silly question as i am new in SAP Basis...
    Thanks & Regards,
    Prasad Deshpande

  • OBIEE 11.1.1.6 Scheduler Server fails to start

    When the server is rebooted we often have failures in start up of the scheduler server in bipublisher. It is always connect to a MBEAN failure. During operations when it does come up we see a lot of error messages about MBEAN errors as well. I would like to know why, and what, is causing the failures. When it was installed we did a standard install with basic configuration. Here is a listing of the error when it occurs. Sometimes it can be correct by restarting ALL the servers. Other times we have to reboot the server. It is a windows server.
    Message ID OBI-SYSMAN-1016
    Message Level 1
    Relationship ID 1:17002
    Component AdminServer
    Module oracle.bi.management.adminservices
    Host INF-BIP-PRD03
    Host IP Address 172.16.1.64
    User weblogic
    Thread ID Thread-97
    ECID 335286e7f84b3bef:7b38227c:141091813aa:-8000-000000000000014f
    Message MBean operation failed.
    Supplemental Detail oracle.bi.management.adminservices.model.ProcessManagementException: Failed to start J2EE BI component: AdminServer:bipublisher#11.1.1
    at oracle.bi.management.adminservices.deployment.JavaDeployments._startSingleDeployment(JavaDeployments.java:179)
    at oracle.bi.management.adminservices.deployment.JavaDeployments._startDeployments(JavaDeployments.java:148)
    at oracle.bi.management.adminservices.deployment.JavaDeployments.startAll(JavaDeployments.java:349)
    at oracle.bi.management.adminservices.deployment.JavaDeployments.startAll(JavaDeployments.java:322)
    at oracle.bi.management.adminservices.mbeans.impl.BIInstanceMBeanImpl.startJavaComponents(BIInstanceMBeanImpl.java:509)
    at oracle.bi.management.adminservices.mbeans.impl.BIInstanceMBeanImpl.localStart(BIInstanceMBeanImpl.java:296)
    at oracle.bi.management.adminservices.mbeans.impl.BIInstanceMBeanImpl.start(BIInstanceMBeanImpl.java:246)
    at oracle.bi.management.adminservices.mbeans.impl.BIInstanceMBeanImpl.start(BIInstanceMBeanImpl.java:284)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at oracle.as.jmx.framework.standardmbeans.spi.OracleStandardEmitterMBean.doInvoke(OracleStandardEmitterMBean.java:1012)
    at oracle.adf.mbean.share.AdfMBeanInterceptor.internalInvoke(AdfMBeanInterceptor.java:104)
    at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doInvoke(AbstractMBeanInterceptor.java:252)
    at oracle.as.jmx.framework.generic.spi.security.AbstractMBeanSecurityInterceptor.internalInvoke(AbstractMBeanSecurityInterceptor.java:190)
    at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doInvoke(AbstractMBeanInterceptor.java:252)
    at oracle.security.jps.ee.jmx.JpsJmxInterceptor$2.run(JpsJmxInterceptor.java:358)
    at java.security.AccessController.doPrivileged(Native Method)
    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
    at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
    at oracle.security.jps.ee.jmx.JpsJmxInterceptor.internalInvoke(JpsJmxInterceptor.java:374)
    at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doInvoke(AbstractMBeanInterceptor.java:252)
    at oracle.as.jmx.framework.generic.spi.interceptors.ContextClassLoaderMBeanInterceptor.internalInvoke(ContextClassLoaderMBeanInterceptor.java:103)
    at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doInvoke(AbstractMBeanInterceptor.java:252)
    at oracle.as.jmx.framework.generic.spi.interceptors.MBeanRestartInterceptor.internalInvoke(MBeanRestartInterceptor.java:116)
    at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doInvoke(AbstractMBeanInterceptor.java:252)
    at oracle.as.jmx.framework.generic.spi.interceptors.LoggingMBeanInterceptor.internalInvoke(LoggingMBeanInterceptor.java:524)
    at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doInvoke(AbstractMBeanInterceptor.java:252)
    at oracle.as.jmx.framework.standardmbeans.spi.OracleStandardEmitterMBean.invoke(OracleStandardEmitterMBean.java:924)
    at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:836)
    at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:761)
    at weblogic.management.mbeanservers.domainruntime.internal.FederatedMBeanServerInterceptor.invoke(FederatedMBeanServerInterceptor.java:349)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$16.run(WLSMBeanServerInterceptorBase.java:449)
    at java.security.AccessController.doPrivileged(Native Method)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.invoke(WLSMBeanServerInterceptorBase.java:447)
    at weblogic.management.mbeanservers.internal.JMXContextInterceptor.invoke(JMXContextInterceptor.java:263)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$16.run(WLSMBeanServerInterceptorBase.java:449)
    at java.security.AccessController.doPrivileged(Native Method)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.invoke(WLSMBeanServerInterceptorBase.java:447)
    at weblogic.management.mbeanservers.internal.SecurityMBeanMgmtOpsInterceptor.invoke(SecurityMBeanMgmtOpsInterceptor.java:65)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$16.run(WLSMBeanServerInterceptorBase.java:449)
    at java.security.AccessController.doPrivileged(Native Method)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.invoke(WLSMBeanServerInterceptorBase.java:447)
    at weblogic.management.mbeanservers.internal.SecurityInterceptor.invoke(SecurityInterceptor.java:444)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServer.invoke(WLSMBeanServer.java:323)
    at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$11$1.run(JMXConnectorSubjectForwarder.java:663)
    at java.security.AccessController.doPrivileged(Native Method)
    at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$11.run(JMXConnectorSubjectForwarder.java:661)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
    at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder.invoke(JMXConnectorSubjectForwarder.java:654)
    at javax.management.remote.rmi.RMIConnectionImpl.doOperation(RMIConnectionImpl.java:1427)
    at javax.management.remote.rmi.RMIConnectionImpl.access$200(RMIConnectionImpl.java:72)
    at javax.management.remote.rmi.RMIConnectionImpl$PrivilegedOperation.run(RMIConnectionImpl.java:1265)
    at java.security.AccessController.doPrivileged(Native Method)
    at javax.management.remote.rmi.RMIConnectionImpl.doPrivilegedOperation(RMIConnectionImpl.java:1367)
    at javax.management.remote.rmi.RMIConnectionImpl.invoke(RMIConnectionImpl.java:788)
    at javax.management.remote.rmi.RMIConnectionImpl_WLSkel.invoke(Unknown Source)
    at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:174)
    at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:222)
    at javax.management.remote.rmi.RMIConnectionImpl_1035_WLStub.invoke(Unknown Source)
    at javax.management.remote.rmi.RMIConnector$RemoteMBeanServerConnection.invoke(RMIConnector.java:993)
    at weblogic.management.remote.wlx.ClientProvider$WLXMBeanServerConnectionWrapper.invoke(ClientProvider.java:291)
    at weblogic.management.remote.wlx.ClientProvider$WLXMBeanServerConnectionWrapper.invoke(ClientProvider.java:291)
    at oracle.sysman.emai.model.bi.impl.JmxUtil.invokeMethod(JmxUtil.java:184)
    at oracle.sysman.emai.model.bi.impl.InstanceMBeanHelper.start(InstanceMBeanHelper.java:126)
    at oracle.sysman.emai.model.bi.impl.InstanceModelAdaptor.restart(InstanceModelAdaptor.java:335)
    at oracle.sysman.emai.view.bi.SystemStartStopView.restart(SystemStartStopView.java:82)
    at oracle.sysman.emai.view.bi.AvailabilityView.restartAllComponents(AvailabilityView.java:359)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at oracle.sysman.emas.sdk.progress.WorkWrapper.run(WorkWrapper.java:96)
    at java.lang.Thread.run(Thread.java:662)
    I would like some guidance if we need to reinstall OBIEE, reinstall the server, or another way to stop the problems.
    Thanks

    Hi,
    You can delete the BIPublisher deployment in the "Deployments"(in the weblogic admin console) and then you can create the new "BIPublisher" (not BIPublisher11.1.1) using the bipublisher .ear/.war files available in the ORACLE HOME directories.
    i believe this will work and you are not disturbing any setup here .its just like you are creating a new deployment
    let me know if this works
    Thanks
    Naga

Maybe you are looking for